S3.25 Leg Press Station - Precor

S3.25 Leg Press Option Assembly Instructions4 AdjustmentsAfter the Leg Press Option is assembled, you shouldcheck the Cables for proper tension. These are someobvious signs that cable problems exist:✔✔✔Excess slack exists in the Cable.The Top Cap Weight does not rest squarely on theWeight Stack.The Cable rubs the inside edges of the pulleys.Top Cap WeightTop WeightWeight PinACAUTION: Take the time to perform the followingsteps. If the Cables do not havethe proper tension, you could damage themachine and void the Precor Limited Warranty.Note: To adjust the Selector Stem, refer to theS3.25 Assembly and Maintenance Guide.1. Stretch the CableA. Sometimes a new cable must be stretched so thatthe Top Cap Weight rests on the Weight Stack. Tolengthen the Cable, insert the Weight Pin at acomfortable weight level.B. Push up on the Chest Press Arms, and then slowlylower them.C. Make sure the Top Cap Weight rests squarely onthe Weight Stack. If it does, no more adjustmentsare needed, and the Leg Press Option is ready touse. If the Top Cap Weight does not rest on the TopChest Press Arms1 2 3 4 5 6BCTop CapWeightAdjustmentspage 16