S3.25 Leg Press Station - Precor

More documents

Recommendations

Info

S3.25 Leg Press Option Assembly InstructionsC. Reattach the end of the original Surgical Tube fromthe Cable Tree to its prior location and place the newSurgical Tube that came with the Leg Press Optionto the outside of the Top Beam usingone 4-inch bolttwo washerstwo ½-inch barrel spacersone locknutWrench tighten.CNew SurgicalTube1 - 4" bolt2 - washers2 - ½" barrel spacers1 - locknutD. Place the ball-end of Leg Press Option Cable 40538-101 up through the Cable Tree and placeit securely in the U-clip.E. Remove the buttonhead bolt and nylock nut fromthe U-clip.F. Attach the end of the original surgical tube to theCable Tree using the 1¼-inch buttonhead bolt andthin nylock nut removed in Step 6E. Wrench tighten.Note: If you are assembling the Leg Press Option andthe S3.25 simultaneously, go to Step 21 in the S3.25Assembly and Maintenance Guide now.1 - 1¼" button head bolt1 - thin nylock nutEOriginalSurgical TubeCable TreeNew SurgicalTubeU-clipDAttach ballendof Cableto U-clipCable Tree Cable 40538-101(from Leg Press)1 2 3 4 5 6Step 6. Assemble the Cable and Pulleys, Continuedpage 14
S3.25 Leg Press Option Assembly Instructions7. Replace the ShroudA. Pick up the Shroud and fasteners from the locationwhere you left them in Step 4B.Top BeamB. Replace the Shroud by realigning the mountingholes and insertingsix 2¾-inch boltssix washerssix locknutsWrench tighten.Notch in Shroud fitsaround Top BeamfastenerAReplace ShroudB6 - 2¾" bolts6 - washers6 - locknuts1 2 3 4 5 6Step 7. Replace the Shroudpage 15
Page 4 and 5: S3.25 Leg Press Option Assembly Ins

S3.25 Leg Press Station - Precor

Create successful ePaper yourself

Delete template?

Save as template?