S3.25 Leg Press Station - Precor

More documents

Recommendations

Info

S3.25 Leg Press Option Assembly InstructionsD. Assemble the Footrest by resting the Pivot Armon the Rubber Bumper. Make sure that the redarrow on the back of the Footrest points towardthe ceiling.E2 - large ½" x 3¼" bolts4 - ½" diameter washers2 - large ½" lock nutsE. Attach the Footrest to the Pivot Arm and PivotTube usingtwo large ½-inch by 3-¼-inch boltsfour ½-inch-diameter washerstwo large ½-inch locknutsWrench tighten enough to allow free movement ofthe Pivot Arm.F2 - 3" bolts4 - washers2 - locknutsF. Attach the Handle to the Seat Frame usingtwo 3-inch boltsfour washerstwo locknutsWrench tighten.FootrestPivot ArmHandlePop PinFootrestSeat FrameRed Arrow LabelPivot ArmPivot TubeRubber BumperDRest the Pivot Arm on theRubber Bumper1 2 3 4 5 6Step 3. Assemble the Frame, Continuedpage 10
S3.25 Leg Press Option Assembly Instructions4. Assemble the Seat PadsA. Attach one of the Seat Pads to the Seat BracketSupport usingtwo 1¼-inch boltstwo washersWrench tighten.Seat Padused as aback restSeat Bracket SupportBLift the PopPin to slidethe back restB. Lift the Pop Pin and slide the Seat Pad out of theway to assemble the other Seat Pad.C. Attach the remaining Seat Pad to the Seat Frameusingtwo 3-inch boltstwo washersWrench tighten.Note: Make sure that the seams on the Seat Padsface down toward the frame.HandleA2 - 1¼" bolts2 - washersNote: If you are assembling the Leg Press Option andthe S3.25 simultaneously, return to Step 11 in theS3.25 Assembly and Maintenance Guide now.Seat FrameSeat PadC2 - 3" bolts2 - washers1 2 3 4 5 6Step 4. Assemble the Seat Padspage 11
Page 4 and 5: S3.25 Leg Press Option Assembly Ins

S3.25 Leg Press Station - Precor

Create successful ePaper yourself

Delete template?

Save as template?