S3.25 Leg Press Station - Precor

S3.25 Leg Press Option Assembly InstructionsD. Assemble the Footrest by resting the Pivot Armon the Rubber Bumper. Make sure that the redarrow on the back of the Footrest points towardthe ceiling.E2 - large ½" x 3¼" bolts4 - ½" diameter washers2 - large ½" lock nutsE. Attach the Footrest to the Pivot Arm and PivotTube usingtwo large ½-inch by 3-¼-inch boltsfour ½-inch-diameter washerstwo large ½-inch locknutsWrench tighten enough to allow free movement ofthe Pivot Arm.F2 - 3" bolts4 - washers2 - locknutsF. Attach the Handle to the Seat Frame usingtwo 3-inch boltsfour washerstwo locknutsWrench tighten.FootrestPivot ArmHandlePop PinFootrestSeat FrameRed Arrow LabelPivot ArmPivot TubeRubber BumperDRest the Pivot Arm on theRubber Bumper1 2 3 4 5 6Step 3. Assemble the Frame, Continuedpage 10