Fiber Optic Interconnects

JSFC15 Receptacle /JSF16 Plug ConnectorsHow to OrderAmphenolAerospace• Approved for use in JSF/F35 applications• Based on Amphenol ® Composite Tri-Start, Qualified toMIL-DTL-38999, Rev. J.• Increased Corrosion Resistance-nickel plating (200°C) bothwithstand 2000 hours of salt spray exposure.• Durability-1500 couplings minimum(in reference to connector couplings, not termini)• Termini Protection-recessed pins in this 100% scoop-proofconnector minimize potential termini damage• Vibration/Shock-operates under severe high temperature vibration• Threaded coupling quickly and completely mates in one 360° turnof the coupling nutMECHANICAL/ENVIRONMENTALPARAMETERPERFORMANCEMaintenance Aging MIL-STD-1344 Method 2002Mating DurabilityInsert RetentionSine VibrationStandard ShockHigh Impact ShockTemperature LifeThermal Shock500 mating cycles100 PSI/25 lbs minimum60 G (140-2000 Hz), 4 hours each at ambient,-55 deg C, and +175 deg C300 G half-sine, 3 ms durationMIL-S-901 grade A with lightweight fixture1000 hours @ high temp rating-55° C to +165° C - 5 cyclesEasy Steps to build a part number... JSFC15 & JSFC161. 2. 3. 4. 5. 6.Program PartNumberShellStylesServiceClassShell Size –Insert arrangementContact TypeAlternatePositionsJSFC15 20 M E – 8 A NJSFC16 26 M E – 8 B NJSFC15 Receptacle andJSFC16 Fiber Optic Plug38999IIIHDDualokIIISJTAccessoriesAquaconHerm/SealPCBHighSpeedFiberOpticsContactsConnectorsCablesEMI FilterTransient26482Matrix 283723 IIIMatrix|Pyle26500PyleJSFC15JSFC16DesignatesReceptacle circular fiber opticPlug circular fiber opticDesignates20 JSFC15 Wall Mount Receptacle26 JSFC16 Straight PlugMStep 1. Select a Connector TypeStep 2. Select a Shell StyleStep 3. Select a Service ClassDesignatesComposite, electroless nickel plateStep 4. Select a Shell Size – Insert ArrangementShell Sizes are MIL-DTL-38999, Series III,plus newer High Density Insert ArrangementsShell Size InsertArrangementB – (11) 2C – (13) 4D – (15) 5E – (17) 8Step 5. Select a Contact TypeABDesignatesPin contactsSocket contactsStep 6. Select an Alternate PositionA, B, C, D, E, N for normalShell Size InsertArrangementF – (19) 11G – (21) 16H – (23) 21J – (25) 29J – (25) 375015Crimp RearReleaseMatrix22992Class LBack-ShellsOptionsOthersContact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com201