08 YZF-R6

More documents

Recommendations

Info

• If the kit’s large radiator is installed for the bracket regulator packaged with this set, use itwhen the regulator is installed to the position shown in drawing 5.(Diagram 5) 9 8 4 7 10FWDFRAMERECTIFIERREGULATOR• This harness has a coupler that connects to the 2D made data logger.For details of the specifications of the data logger, please access the website.Web http://www.2d-kit-system.com/– 27 –
19. ECU Set (2C0-8591A-80)Parts ListNo. PART No. PART NAME Q'TY REMARKS1 2C0-8591A-80 ECU 12 13S-2818Y-70 CD 1 YMS, MANUAL• Use of this set and a wire harness included in the kit enables regulation (or setting) of fuelinjection and ignition timing, etc.• For details as to how to regulate (or set) fuel injection and ignition timings, etc., refer to themanual in the CD-ROM that comes with the set.• There are two types of basic control data for the ECU included in this set: SS (SuperSports) and ST (Stock Sports). They can be switched over and vice versa. To make it in theST specification, just remove two couplers located at the lower left of the kit harness fueltank. (See the figure below.)SS specification: Kit cam shaft and *Recommended mufflerST specification: *Recommended muffler* Recommended mufflerMade by Akrapovic (For details of the specification, please access the website.)Web http://www.akrapovic-exhaust.comCAUTION:• The ECU of this set will not function if it is not assembled with the wire harness (13S-82590-70) of the kit.• Do not use the ECU of this set for any other assembly than the one below.ECUWIRE HARNESS ASSY. THROTTLE BODY ASSY.2006 Models 2C0-8591A-70 2C0-82590-70 2C0-13750-002007 Models 2C0-8591A-71 2C0-82590-80 2C0-13750-0020<strong>08</strong> Models 2C0-8591A-80 13S-82590-70 13S-13750-00– 28 –
Page 3 and 4: CONTENTS1 Engine Specifications....
Page 6: 2. Spark plug set (5FL-R045Q-70)Par
Page 9 and 10: 5. Valve Spring Set (2C0-A2110-70)P
Page 11 and 12: 8. Throttle Body Clamp Assembly (2C
Page 13 and 14: STDA/C ASSY.REMOVEKIT!Insertiondire
Page 15 and 16: 12. Slipper Clutch Setting Set (4B1
Page 17 and 18: When installing the kit parts, the
Page 19 and 20: Parts ListNo. PART No. PART NAME Q'
Page 21 and 22: YZF-R6 Speed ListEngine speed (rpm)
Page 23 and 24: 30282938292830323631332928273534212
Page 25 and 26: 15. Drive SprocketParts ListNo. PAR
Page 27 and 28: 17. ACM Set (2C0-F1400-71)Parts Lis
Page 29: • The switch installed to the STD
Page 33 and 34: • Use of the ECU in the kit and t
Page 35 and 36: 2-2 Vehicle Accessories21. Engine P
Page 37 and 38: Before mounting the protector, cut
Page 39 and 40: 24. Front Fork Spring SetParts List
Page 41 and 42: 25. Steering Damper Stay Set (2C0-C
Page 43 and 44: 27. Front Spare Wheel Assembly (2C0
Page 45 and 46: 29. Throttle Set (2C0-C6300-70)Part
Page 47 and 48: 3 Tightening Torque ListEngineTo be
Page 49 and 50: To be tightened Part No. Part Name
Page 51 and 52: CRANKCASE 1x CRANKCASE2CRANKCASE 1x
Page 55 and 56: BodyTo be tightened Part No. Part N
Page 59 and 60: Installing the CrankcaseTightening
Page 61: Published by YAMAHA MOTOR ENGINEERI

08 YZF-R6

Create successful ePaper yourself

Delete template?

Save as template?