08 YZF-R6

9. AIS Plug Set (13S-A4890-70)This plug set is used when the AIS (Air Induction System), an exhaust gas purification system,is removed.Parts ListNo. PART No. PART NAME Q'TY REMARKS1 5SL-1482L-70 PLATE, 2 2* 2 93608-16M16 PIN, DOWEL 43 90336-10020 PLUG, TAPER 1Installation1. Remove the hose attached to the cylinder head cover and the air cut-off valve assemblyaccompanying the hose.2. Remove the cap fitted to the hose and remove the reed valve and plate from the inside.3. Install the plate (5SL-1482L-70) in replacement of the cap. Apply liquid gasket to the plate.4. Remove the cylinder head cover and the four collars fitted to the cover. Install the PIN(93608-16M16).5. After removing the hose connected to the air cleaner case from the air-cut valve assembly,open the upper case of the air cleaner case and insert the PLUG (90336-10020) into thehole where the hose was connected.– 9 –