ER-430M SVC M.pdf

3 Installation and Operation3-3 OperationNote: Before using this Electronic Cash Register (ECR) for the first time, leave it powered ON in the REG modefor a at least 24 hours. This allows the Ni-MH battery, which maintains the ECR’s memory while thepower is OFF, to fully charge.3-3-1 Mode SwitchThe position of the Mode Key determines the action of the ECR. The modes are as shown in Table 3-3ModeFunctionVOIDOFFREGXVOIDOFFREGUse to void (correct) items outside of a sale.The Register is inoperable.Use for normal registrations.ZXUse to read register reports and perform other manager functions.SPGMZPGMUse to read register reports and reset totals to zero.Use to program the registerSUse for H/W tests and special setting.Figure3-4 Mode SwitchTable3-3 Mode Switch FunctionThe mode switch can be used to access the following key lock positions.Key Accessible Position RemarkVDREGZPCVoid, Off, Register(REG), Manager(X)Void, Off, Register(REG)Off, Register(REG), Manager(X), Clear Totals(Z)Void, Off, Register(REG), Manager(X), Clear Totals(Z), Program(PGM)Void, Off, Register(REG), Manager(X), Clear Totals(Z), Program(PGM), Service Mode(S)Table3-4 Key FunctionNote : The Key can be removed from the key lock in the OFF or REGISTER position.3-4 SAM4S ER-430 SERIES