Internal Prosthetic Manual - BioHorizons

More documents

Recommendations

Info

BALL ABUTMENT OVERDENTURELab 7 - Process dentureProcess the denture using normal laboratory procedures. The BlackPositioning Inserts should be used throughout the entire process.Send to Clinician• Finished denture• Working modelClinical 8 - Deliver dentureSeat the denture with the Black Positioning Inserts still in place to gaugeinitial retention. If the retention is acceptable, the Black PositioningInserts may be worn clinically for a period of time determined by theclinician.When patient is ready for greater retention, remove the Black PositioningInserts. Place ONE Clinical Nylon Insert of choice into a positionedhousing with the Insert Seating Tool*.Seat the denture, engaging the Ball Abutment. Check retention bysnapping the denture on and off the Ball Abutment in the patient’smouth.Decrease the retention, if necessary, by inserting the Reamer* into theinsert and turning clockwise. Care should be taken not to over-adjust.When the desired retention is achieved, proceed to the second insertusing the same technique.Insert the finished denture in the patient’s mouth, engaging the BallAbutments. Make occlusal or tissue adjustments as necessary. Instructthe patient on insertion and removal of the prosthesis and oral hygienemaintenance.Clinical Nylon InsertsRelative RetentionElasticExtra SoftSoftStandard (firmest)*Manufactured by Rhein83 (www.rhein83usa.com).shop online at www.biohorizons.com76
BAR OVERDENTURE SCREW-RETAINEDABUTMENT-LEVEL CAST BARScrew (regular).Abutment for ScrewPlastic Coping.Abutment for ScrewCover Cap,Abutment for ScrewDirect Pick-up Coping.Abutment for ScrewAbutments for ScrewIMPLANT-LEVEL CAST BARDirect Coping,Non-hexedCustom CastAbutment,Non-hexedTools needed.050” (1.25mm)Hex DriverHandWrench30 NcmTorque Wrench.050” Hex Driver(regular)Hex Adapter,Abutment for ScrewParts shown are for the 4.5mm prosthetic platform (3.5mm and 5.7mm platforms are not shown). Please refer to theTapered Internal Catalog & Surgical Manual (L0603) or the Internal / Single-stage Product Catalog (ML0115) for completecomponent ordering information including part dimensions.77shop online at www.biohorizons.com
Page 2 and 3:
TABLE OF CONTENTSIntroduction1Treat
Page 4 and 5:
TREATMENT PLANNINGFor ideal results
Page 8 and 9:
RESTORATIVE OPTIONSImplant-level Ce
Page 10 and 11:
RESTORATIVE OPTIONSAbutment-level S
Page 12 and 13:
IMPRESSION TECHNIQUESOverviewThere
Page 14 and 15:
EMERGENCE PROFILE CHARTS3.5mm Prost
Page 16 and 17:
EMERGENCE PROFILE CHARTS5.7mm Prost
Page 18 and 19:
P R E P A R E D A B U T M E N T I M
Page 20 and 21:
IMPLANT-LEVEL IMPRESSIONClinical 1
Page 22 and 23:
IMPLANT-LEVEL IMPRESSIONLab 6 - Cre
Page 24 and 25:
IMPLANT-LEVEL IMPRESSIONOPEN TRAY -
Page 26 and 27:
IMPLANT-LEVEL IMPRESSIONLab 6 - Ass
Page 28 and 29: ABUTMENT-LEVEL IMPRESSIONClinical 1
Page 32 and 33: ABUTMENT-LEVEL IMPRESSIONOPEN TRAY
Page 36 and 37: BALL ABUTMENT IMPRESSIONClinical 1
Page 38 and 39: CUSTOM TRAY FABRICATIONIN PREPARATI
Page 40 and 41: ABUTMENT SELECTION FLOW CHARTABUTME
Page 42 and 43: Restorative TechniquesTable of Cont
Page 44 and 45: CEMENT-RETAINED SINGLE / MULTIPLE U
Page 50 and 51: SINGLE-TOOTH SCREW RETAINEDLab 1 -
Page 52 and 53: SINGLE-TOOTH SCREW-RETAINEDLab 7 -
Page 54 and 55: NOTESshop online at www.biohorizons
Page 56 and 57: S I N G L E - T O O T H C E M E N T
Page 58 and 59: SINGLE-TOOTH CEMENT-RETAINEDLab 5 -
Page 60 and 61: SINGLE-TOOTH CEMENT-RETAINEDClinica
Page 62 and 63: MULTIPLE-UNIT SCREW-RETAINEDLab 1 -
Page 64 and 65: MULTIPLE-UNIT SCREW-RETAINEDLab 7 -
Page 66 and 67: MULTIPLE-UNIT CEMENT-RETAINEDLab 1
Page 68 and 69: MULTIPLE-UNIT CEMENT-RETAINEDLab 5
Page 70 and 71: MULTIPLE-UNIT CEMENT-RETAINEDClinic
Page 72 and 73: BALL ABUTMENT OVERDENTUREClinical 1
Page 74 and 75: BALL ABUTMENT OVERDENTUREClinical 6
Page 76 and 77: BALL ABUTMENT OVERDENTURELab 1 - Po
Page 81 and 82: BAR OVERDENTURE SCREW-RETAINEDLab 2
Page 83 and 84: BAR OVERDENTURE SCREW-RETAINEDLab 6
Page 85 and 86: BAR OVERDENTURE SCREW-RETAINEDClini
Page 87 and 88: BAR OVERDENTURE SCREW-RETAINEDIMPLA
Page 93 and 94: ICON LEGENDSymbol descriptions for
show all

Internal Prosthetic Manual - BioHorizons

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?