Internal Prosthetic Manual - BioHorizons

More documents

Recommendations

Info

SINGLE-TOOTH CEMENT-RETAINEDLab 5 - WaxingCreate a wax coping for the crown on the modified abutment followingroutine crown & bridge procedures.Lab 6 - Sprue, invest and castSprue, invest and cast the coping pattern in high noble alloy according tomanufacturer’s instructions.Lab 7 - Finish castingDivest, fit and finish the cast coping following conventional laboratorytechniques.Seat the finished coping onto the modified abutment on the workingcast.Send to Clinician• Metal coping• Abutment and Abutment Screw• Working modelshop online at www.biohorizons.com56
SINGLE-TOOTH CEMENT-RETAINEDClinical 8 - Patient try-inSanitize modified abutment and coping (per standard clinical procedure).Remove the provisional restoration or Healing Abutment from thepatient’s mouth with the .050” (1.25mm) Hex Driver. Make sure theimplant prosthetic platform is free of bone and soft tissue.Place the modified abutment onto the implant and hand-tighten theAbutment Screw with the .050” (1.25mm) Hex Driver. Take a radiographalong the long axis of the implant to ensure the abutment is seatedcompletely on the implant. Seat the finished casting on the abutmentand verify fit and contour. Make adjustments as necessary. Return thecasting to the lab for completion.Send to Lab• Metal coping• Abutment and Abutment Screw• Working model• ShadeLab 9 - Finish castingSeat the finished coping onto the modified abutment on the workingcast. Prepare the coping to receive the opaque layer according to routinelaboratory procedures.Apply the veneer material to the coping and finish according to routinelaboratory procedures. Polish any metal margins as necessary. Seat thefinished crown on the working cast and return to the clinician for patientdelivery.Send to Clinician• Finished crown• Abutment and Abutment Screw• Working modelshop online at www.biohorizons.com57
Page 2 and 3:
TABLE OF CONTENTSIntroduction1Treat
Page 4 and 5:
TREATMENT PLANNINGFor ideal results
Page 8 and 9: RESTORATIVE OPTIONSImplant-level Ce
Page 10 and 11: RESTORATIVE OPTIONSAbutment-level S
Page 12 and 13: IMPRESSION TECHNIQUESOverviewThere
Page 14 and 15: EMERGENCE PROFILE CHARTS3.5mm Prost
Page 16 and 17: EMERGENCE PROFILE CHARTS5.7mm Prost
Page 18 and 19: P R E P A R E D A B U T M E N T I M
Page 20 and 21: IMPLANT-LEVEL IMPRESSIONClinical 1
Page 22 and 23: IMPLANT-LEVEL IMPRESSIONLab 6 - Cre
Page 24 and 25: IMPLANT-LEVEL IMPRESSIONOPEN TRAY -
Page 26 and 27: IMPLANT-LEVEL IMPRESSIONLab 6 - Ass
Page 28 and 29: ABUTMENT-LEVEL IMPRESSIONClinical 1
Page 32 and 33: ABUTMENT-LEVEL IMPRESSIONOPEN TRAY
Page 36 and 37: BALL ABUTMENT IMPRESSIONClinical 1
Page 38 and 39: CUSTOM TRAY FABRICATIONIN PREPARATI
Page 40 and 41: ABUTMENT SELECTION FLOW CHARTABUTME
Page 42 and 43: Restorative TechniquesTable of Cont
Page 44 and 45: CEMENT-RETAINED SINGLE / MULTIPLE U
Page 50 and 51: SINGLE-TOOTH SCREW RETAINEDLab 1 -
Page 52 and 53: SINGLE-TOOTH SCREW-RETAINEDLab 7 -
Page 54 and 55: NOTESshop online at www.biohorizons
Page 56 and 57: S I N G L E - T O O T H C E M E N T
Page 60 and 61: SINGLE-TOOTH CEMENT-RETAINEDClinica
Page 62 and 63: MULTIPLE-UNIT SCREW-RETAINEDLab 1 -
Page 64 and 65: MULTIPLE-UNIT SCREW-RETAINEDLab 7 -
Page 66 and 67: MULTIPLE-UNIT CEMENT-RETAINEDLab 1
Page 68 and 69: MULTIPLE-UNIT CEMENT-RETAINEDLab 5
Page 70 and 71: MULTIPLE-UNIT CEMENT-RETAINEDClinic
Page 72 and 73: BALL ABUTMENT OVERDENTUREClinical 1
Page 74 and 75: BALL ABUTMENT OVERDENTUREClinical 6
Page 76 and 77: BALL ABUTMENT OVERDENTURELab 1 - Po
Page 78 and 79: BALL ABUTMENT OVERDENTURELab 7 - Pr
Page 81 and 82: BAR OVERDENTURE SCREW-RETAINEDLab 2
Page 83 and 84: BAR OVERDENTURE SCREW-RETAINEDLab 6
Page 85 and 86: BAR OVERDENTURE SCREW-RETAINEDClini
Page 87 and 88: BAR OVERDENTURE SCREW-RETAINEDIMPLA
Page 93 and 94: ICON LEGENDSymbol descriptions for
show all

Internal Prosthetic Manual - BioHorizons

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?