Internal Prosthetic Manual - BioHorizons

SINGLE-TOOTH SCREW RETAINEDLab 1 - Pour working castFollow the steps for creating an Implant-level Stone Model (Hexed) usingeither the Indirect Transfer method (pages 17-20) or the Direct Pick-upmethod (pages 21-24).Lab 2 - Seat the custom cast abutmentSeat the Custom Cast Abutment (Hexed) onto the Implant Analog inthe working cast.Hand-tighten the Abutment Screw with the .050” (1.25mm) HexDriver, Long.Mark required modification needed to provide adequate room fordesired prosthesis.Lab 3 - Modify custom cast abutmentModify the plastic sleeve of the abutment with a cutting disk for correctvertical and interproximal clearances.shop online at www.biohorizons.com48