Internal Prosthetic Manual - BioHorizons

More documents

Recommendations

Info

ABUTMENT-LEVEL IMPRESSIONClinical 6 - Remove coping screwsAfter the impression material has set, remove the long screws. Removethe impression from the mouth. Verify that the impression material iscompletely adapted around the copings. Place the Cover Caps on theAbutments for Screw and hand-tighten.Modify the temporary prosthesis (as shown on page 28) to accommodatethe height of the Abutments for Screw and Cover Caps.Send to Lab• Impression• Direct Impression components• Abutment for Screw Analogs• Bite registration• Opposing model or impressionLab 7 - Assemble analogPlace Abutment for Screw Analogs onto the Direct Pick-up copings byholding the analog in place while inserting the long screws through theaccess holes in the impression tray. Hand-tighten the screws.Lab 8 - Fabricate stone modelFabricate a working cast. Articulate according to normal laboratoryprocedures.shop online at www.biohorizons.com32
BALL ABUTMENT IMPRESSIONCLOSED TRAY - INDIRECT TRANSFER TECHNIQUEBall AbutmentsBall AbutmentAnalogTools needed.050” (1.25mm)Hex DriverHandWrench.050” Hex Driver(regular)30 NcmTorque WrenchParts shown are for the 4.5mm prosthetic platform (3.5mm and 5.7mm platforms are not shown). Please refer to theTapered Internal Catalog & Surgical Manual (L0603) or the Internal / Single-stage Product Catalog (ML0115) for completecomponent ordering information including part dimensions.33shop online at www.biohorizons.com
Page 2 and 3: TABLE OF CONTENTSIntroduction1Treat
Page 4 and 5: TREATMENT PLANNINGFor ideal results
Page 8 and 9: RESTORATIVE OPTIONSImplant-level Ce
Page 10 and 11: RESTORATIVE OPTIONSAbutment-level S
Page 12 and 13: IMPRESSION TECHNIQUESOverviewThere
Page 14 and 15: EMERGENCE PROFILE CHARTS3.5mm Prost
Page 16 and 17: EMERGENCE PROFILE CHARTS5.7mm Prost
Page 18 and 19: P R E P A R E D A B U T M E N T I M
Page 20 and 21: IMPLANT-LEVEL IMPRESSIONClinical 1
Page 22 and 23: IMPLANT-LEVEL IMPRESSIONLab 6 - Cre
Page 24 and 25: IMPLANT-LEVEL IMPRESSIONOPEN TRAY -
Page 26 and 27: IMPLANT-LEVEL IMPRESSIONLab 6 - Ass
Page 28 and 29: ABUTMENT-LEVEL IMPRESSIONClinical 1
Page 30 and 31: ABUTMENT-LEVEL IMPRESSIONClinical 7
Page 32 and 33: ABUTMENT-LEVEL IMPRESSIONOPEN TRAY
Page 36 and 37: BALL ABUTMENT IMPRESSIONClinical 1
Page 38 and 39: CUSTOM TRAY FABRICATIONIN PREPARATI
Page 40 and 41: ABUTMENT SELECTION FLOW CHARTABUTME
Page 42 and 43: Restorative TechniquesTable of Cont
Page 44 and 45: CEMENT-RETAINED SINGLE / MULTIPLE U
Page 50 and 51: SINGLE-TOOTH SCREW RETAINEDLab 1 -
Page 52 and 53: SINGLE-TOOTH SCREW-RETAINEDLab 7 -
Page 54 and 55: NOTESshop online at www.biohorizons
Page 56 and 57: S I N G L E - T O O T H C E M E N T
Page 58 and 59: SINGLE-TOOTH CEMENT-RETAINEDLab 5 -
Page 60 and 61: SINGLE-TOOTH CEMENT-RETAINEDClinica
Page 62 and 63: MULTIPLE-UNIT SCREW-RETAINEDLab 1 -
Page 64 and 65: MULTIPLE-UNIT SCREW-RETAINEDLab 7 -
Page 66 and 67: MULTIPLE-UNIT CEMENT-RETAINEDLab 1
Page 68 and 69: MULTIPLE-UNIT CEMENT-RETAINEDLab 5
Page 70 and 71: MULTIPLE-UNIT CEMENT-RETAINEDClinic
Page 72 and 73: BALL ABUTMENT OVERDENTUREClinical 1
Page 74 and 75: BALL ABUTMENT OVERDENTUREClinical 6
Page 76 and 77: BALL ABUTMENT OVERDENTURELab 1 - Po
Page 78 and 79: BALL ABUTMENT OVERDENTURELab 7 - Pr
Page 81 and 82: BAR OVERDENTURE SCREW-RETAINEDLab 2
Page 83 and 84: BAR OVERDENTURE SCREW-RETAINEDLab 6
Page 85 and 86:
BAR OVERDENTURE SCREW-RETAINEDClini
Page 87 and 88:
BAR OVERDENTURE SCREW-RETAINEDIMPLA
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
ICON LEGENDSymbol descriptions for
show all

Internal Prosthetic Manual - BioHorizons

Create successful ePaper yourself

Delete template?

Save as template?