Internal Prosthetic Manual - BioHorizons
Internal Prosthetic Manual - BioHorizons
Internal Prosthetic Manual - BioHorizons
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ABUTMENT-LEVEL IMPRESSIONClinical 7 - Modify temporary prosthesisModify the temporary prosthesis to accommodate the height of theAbutments for Screw and Cover Caps. A soft reline material may beplaced in the relieved areas to provide moderate retention while the finalprosthesis is being fabricated.Lab 8 - Assemble copings and analogsAssemble the Indirect Transfer Copings to the Abutment for ScrewAnalogs. Insert the assemblies into the corresponding locations in theimpression.Lab 9 - Fabricate stone modelFabricate a working cast.Articulate according to normal laboratory procedures.shop online at www.biohorizons.com28