13.07.2015 Views

Internal Prosthetic Manual - BioHorizons

Internal Prosthetic Manual - BioHorizons

Internal Prosthetic Manual - BioHorizons

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ABUTMENT-LEVEL IMPRESSIONClinical 4 - Make an impressionSyringe medium or heavy-bodied impression material around the copingassemblies.Clinical 5 - Make an impressionLoad the impression tray with a medium or heavy-bodied impressionmaterial and seat it in the mouth.Clinical 6 - Place cover capsRemove the impression tray after the material has set. Verify that theimpression material is completely adapted around the impressioncopings. Remove the Indirect Transfer Copings from the Abutments forScrew.Place the Cover Caps on the Abutments for Screw with the .050”(1.25mm) Hex Driver and hand-tighten.Send to Lab• Impression• Impression copings• Abutment for Screw Analogs• Bite registration• Opposing model or impressionshop online at www.biohorizons.com27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!