Internal Prosthetic Manual - BioHorizons
Internal Prosthetic Manual - BioHorizons
Internal Prosthetic Manual - BioHorizons
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IMPLANT-LEVEL IMPRESSIONLab 6 - Assemble analogMate the Analog with the Direct Pick-up Coping by holding the Analogin place while inserting the long screws through the access holes in theimpression tray. Hand-tighten the screws.A soft tissue model material is recommended around the implant; verifyanalogs are seated properly and apply lubricant around the analogswhere soft tissue needs to be added.Lab 7 - Fabricate stone modelPour a working cast in minimal expansion, high hardness die stone.Articulate according to normal laboratory procedures.shop online at www.biohorizons.com24