Product Selection CHARTS - Parchem

joint filler Product SelectionApplicationSolutionLow load transfer, joint filler, for brickwork,blockwork, and pedestrian traffic concreteexpansion & isolation jointsCut to size from sheet orrollsCompressible polyethylene, closed cell, nonabsorbent,rot-proof, joint fillerJointflexSemi-rigid, joint filler, for forming expansionjoints in concrete, brickwork, blockwork andwater retaining / excluding structuresNon absorbent, closed cell, polyethylene joint filler,non-tainting, rot proof, RTA T1204 compliantStiffjointMedium load rigid, non-expanding jointfiller, for internal & external traffic areas,roads, concrete slabs and pavementsHigh load rigid, self-expanding joint filler, forinternal & external traffic areas, roads, bridges,carparks, water retaining / excluding structuresCut to size from sheet,fixed or bonded tosubstrateResilient and waterproof, economical, ASTM Spec.D1752-84 (Type 111)Resilient and waterproof, expands to fill joint, ASTM Spec.D1752-84 (Type 111), US Fed Spec. HH-F-34F (Type 11,Class C)Hydrocor Type 2Hydrocor Type 3Joint Filler Boards &Joint Backing RodsHigh load rigid, self-expanding joint filler & sealer,for internal & external traffic areas, roads, bridges,carparks, water retaining / excluding structuresLow load, medium density, closed cell,polyethylene backing rod rangeLow density, open cell, polyurethanebacking rod rangeRolls, Rod, cut to length,friction insertedResilient and waterproof, expands to fill joint will notextrude under pressure, ASTM Spec. D1752-84 (Type111), Dept. Housing & Const. Spec. RA SS 106Acts as both a bond breaker and joint profile former tosupport all elastomeric sealants, between all commonbuilding materialsFlexible, versatile, backing rodHydrocor Type 106ExpandafoamEmer-Seal Backing RodCompressible, bitumen impregnated fibreboard filler, for pavements, floors, roadsPolystyrene isolation joint, blockouts, boltsleeves, cylinders, etc., filler materialCut to size from sheet,fixed or bonded tosubstrateResilient, will not extrude under pressure. Onlysuitable for bitumen based sealantsEconomical, lightweight, versatile, compressible fillerCellflexPolystyrenePolyethylene tape used to isolate sealantsfrom substrates or joint fillers, to preventthree sided adhesionRoll width selected, cut tolength, hand appliedEconomical, 66m tape rolls, in 12mm; 15mm; 20mm;25mm; & 50mm widthsBond Breaker Tape