Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9

More documents

Recommendations

Info

Additional Required Tools and AdhesivesTools• Adjustable wrench• Crimping tool• Drill• Drill bit: 1/16", 5/64", 3/32"• Felt-tipped pen• Heat gun• Hobby knife• Hobby scissors• Petroleum jelly• Phillips screwdriver (small)• Phillips screwdriver (large)• Pliers• Rotary tool w/sanding drum• Ruler• Sandpaper• Soldering iron• Solder• String• Threadlock (PAAPT42)• T-pinsAdhesives• 30-minute Epoxy (HAN8002)• Thin CA (PAAPT08)• Medium CA (PAAPT02)• Canopy Glue (PAAPT56)Other Required Items• Epoxy brushes• Felt-tipped pen or pencil• Measuring device (e.g. ruler, tape measure)• Mixing sticks for epoxy• Paper towels• Petroleum jelly• Rubbing alcohol• Sanding bar• Covering Iron (HAN101)• Covering Glove (HAN150)• Sealing Iron Sock (HAN141)Covering Colors• <strong>Cub</strong> Yellow• BlackHANU884HANU8744
Warranty PeriodExclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the "Product") will be freefrom defects in materials and workmanship at the date of purchase by the Purchaser.Limited Warranty(a) This warranty is limited to the original Purchaser ("Purchaser") and is not transferable. REPAIR OR REPLACEMENTAS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers onlythose Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty.Proof of purchase is required for warranty claims. Further, Horizon reserves the right to change or modify this warrantywithout notice and disclaims all other warranties, express or implied.(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THEPURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEETTHE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.(c) Purchaser Remedy- Horizon's sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii)replace, any Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser's exclusiveremedies. Horizon reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacementdecisions are at the sole discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts ofGod, accident, misuse, abuse, negligence, commercial use, or modification of or to any part of the Product. This warrantydoes not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone other thanHorizon. Return of any goods by Purchaser must be approved in writing by Horizon before shipment.Damage LimitsHORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS ORPRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIMIS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability ofHorizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use,setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage orinjury. By the act of use, setup or assembly, the user accepts all resulting liability.If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you areadvised to return this Product immediately in new and unused condition to the place of purchase.Law: These Terms are governed by Illinois law (without regard to conflict of law principals).Safety PrecautionsThis is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requiressome basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injuryor damage to the Product or other property. This Product is not intended for use by children without direct adultsupervision. The Product manual contains instructions for safety, operation and maintenance. It is essential to readand follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctlyand avoid damage or injury.5
Page 1 and 2: Piper J-3 CubWith Power 46Assembly
Page 3: Contents of KitCAGEDLarge Parts:A.
Page 9 and 10: Section 1: Hinge Installation Step
Page 11 and 12: Section 2: Motor and Cowling Instal
Page 13 and 14: Section 2: Motor and Cowling Instal
Page 16 and 17: Section 3: Servo Installation (Aile
Page 18 and 19: Section 3: Servo Installation (Aile
Page 20 and 21: Section 4: Servo Installation (Fuse
Page 22 and 23: Section 4: Servo Installation (Fuse
Page 24 and 25: Section 6: Landing Gear Installatio
Page 26 and 27: Section 7: Installing the Stabilize
Page 28 and 29: Section 7: Installing the Stabilize
Page 30 and 31: Section 8: Wing Installation Step
Page 32 and 33: Recommended CGAn important part of
Page 34 and 35: 2007 Official AMANational Model Air
Page 36: 9892.2© 2007 Horizon Hobby, Inc.41

Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9

Create successful ePaper yourself

Delete template?

Save as template?