Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Control ThrowsThe amount of control throw should be adjusted as closelyas possible using mechanical means, rather than makinglarge changes electronically at the radio. By movingthe position of the clevis at the control horn toward theoutermost hole, you will decrease the amount of controlthrow of the control surface. Moving it toward the controlsurface will increase the amount of throw. Moving thepushrod wire at the servo arm will have the oppositeeffect: Moving it closer to center will decrease throw,and away from center will increase throw. Work with acombination of the two to achieve the closest or exactcontrol throws listed.ElevatorLow RateHigh Rate11/16" (11.5º) Up 9/16" (10º) Down1 1 / 4" (19.5º) Up 1" (18º) DownAileronLow RateHigh RateRudder1/2" (9º) Up 3/8" (8º) Down1 1 / 16" (22º) Up 7/8" (21º) DownLinear measurement (inches) measured at root.1 1 / 2" (28º) Left 1 1 / 2" (28º) RightLinear measurement (inches) measured at frontof counterbalance.Linear measurement (inches) measured atwidest part of elevator (roughly in the center).Note: Use the Low Rate for most flying. TheHigh Rate is used specifically for performingspin maneuvers.31