Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
Piper J-3 Cub Power 46 ARF+ Manual - Hangar 9
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section 3: Servo Installation (Aileron) Step 14Plug in the aileron servo to the radio system. Center thetrims on the transmitter to center the aileron servo. Holdthe aileron in neutral. Use a felt-tipped pen to mark thepushrod wire where it crosses the servo arm. Step 15Bend the pushrod wire at the mark. Use a pushrod wirekeeper to secure the pushrod wire to the servo arm. Step 16Repeat Steps 1 though 15 for the remaining wing panel.18