CompuScope 14200 14 Bit Resolution ,200 MS/s Sampling

We offer the widest range ofhigh-speed digitizers availableon the market today. OurCompuScope 14200General-purpose digitizer for the PCI buspowerful PC-basedinstrumentation productsallow you to create reliable,flexible and high-performancesolutions quickly and easily.Reduce development timeand costs for testing complexapplications such as radar,wireless communications,spectroscopy, etc. by usingA general-purpose, high-resolution digitizer with the power to satisfy themost demanding precision measurement requirements.our GageScope software orSDKs.APPLICATIONSSpectroscopyRadar System Design and TestSignal IntelligenceLidar SystemsWireless CommNon-Destructive TestingHigh-Performance ImagingManufacturing TestFeatures• 200 MS/s sampling on 2 synchronous channels• 14 bits nominal resolution• 100 MHz bandwidth• Full-size, single-slot PCI card• Now available with up to 2 GigaSamples of on-board acquisition memory!• Full-featured, software-controlled front-end• 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory• Programming-free operation with GageScope oscilloscope software• Software Development Kits available for LabVIEW, MATLAB, C/C#www.gage-applied.com

CompuScope 14200 Simplified Block DiagramA/D SAMPLINGNumber of Inputs: 2Resolution:14 bitsENOB (see Note 1): 10.7 bitsSNR (see Note 1):66 dBSFDR (see Note 1): 71 dBSINAD (see Note 1): 64 dBSampling Rates, Channels A and B simultaneously, or A only:200 MS/s, 160 MS/s, 100 MS/s, 80 MS/s,50 MS/s, 40 MS/s, 25 MS/s, 20 MS/s,10 MS/s, 5 MS/s, 2 MS/s, 1 MS/s,500 kS/s, 200 kS/s, 100 kS/s, 50 kS/sConnector:BNCImpedance:1 MW 40 pF or 50 W; (software-selectable)Coupling:AC or DC; (software-selectable)AC Coupled Bandwidth: 10 Hz to 100 MHz (see Note 2)DC Coupled Bandwidth: DC to 100 MHz(50 W only, slightly less for 1 MW)Flatness (see Note 2): Within 1 dB of ideal responseover 75% of bandwidthDC Accuracy: ±0.5 %Input Voltage Ranges: ±100 mV, ±200 mV, ±500 mV, ±1 V,±2 V, ±5 V (±5 V is only available in 50 W)DC Offset:± 1xFull Range, except in ±5 V input rangeProtection:with 1 MW impedance: Diode-clampedwith 50 W impedance: No protectionAbsolute Maximum Amplitudewith 1 MW impedance: ±15 V (continuous)with 50 W impedance: ±5 V (continuous); ±15 V (for 1 ms duration)DIRECT-TO-ADC SAMPLING MODEMode Control:Software-selectableAC Coupled Bandwidth: 30 kHz to 75 MHz (50 W, AC only; see Note 2)Range:± 500 mVProtection:No protectionAbsolute Maximum Amplitude: ± 2 V (continuous)± 4 V (for 1 ms duration)Sample Rate:

TRIGGER OUTImpedance:Amplitude:Connector:INTERNAL CLOCKSource:Accuracy:EXTERNAL CLOCKMaximum Frequency:Minimum Frequency:Signal Level:Termination Impedance:Sampling Edge:50 W0-2.5 V (TTL)SMAClock oscillator±25 ppm (0 to 50°C ambient)200 MHz1 MHzMinimum 1 V RMSMaximum 2 V RMS50 WRisingDuty Cycle: 50% ± 5%Connector:SMACoupling:ACEXTERNAL REFERENCEThe External Reference timebase is used to synchronize theInternal Sampling ClockFrequency:10 MHz; (software-selectable)Signal Level:Minimum 1 V RMSMaximum 2 V RMSImpedance:50 WSampling Edge:RisingDuty Cycle: 50% ± 5%Connector:SMACLOCK OUTMaximum Frequency:Minimum Frequency:Output Frequency:Signal Level:Impedance:Duty Cycle: 50% ± 10%Connector:SMA100 MHz1 MHz (from External Clock)50 kHz (from Internal Clock)Equal to the sample rate when itis ≤ 100 MS/sEqual to half the sample rate when itis > 100 MS/s0-2.5 V (TTL)50 WMULTIPLE RECORDPre-trigger Data:Up to virtually full record lengthRecord Length:128 points minimum.Can be defined with a 64 points resolution.Maximum # Trigger: 8,388,608MULTI-CARD SYSTEMSA unique feature of the CS14200 is its ability to automatically reconfigureitself to Master/Slave or Independent multi-card system simply by addingor removing the Master/Slave Timing Module.Operating Mode:Master/Slave or Multiple/IndependentconfigurationsMaster/Slave:2 to 8 cardsMultiple/Independent: Limited by PC backplaneTIMESTAMPINGResolution:Counter turnover:CARD SIZESingle-slot, full-length PCI7.5 ns24 hours continuousSYSTEM REQUIREMENTSPCI-based computer, minimum Pentium II 500 MHz, with at least one freefull-length PCI slot, 128 MB RAM, 100 MB hard disk.COOLING SYSTEMMinimum CFM Requirement: Characterization in progressPOWER (IN WATTS, PER CARD)PCI BUS INTERFACEPlug-&-Play:Bus Mastering:Scatter-Gather:Bus Width:Bus Speed:Bus Throughput:Compatibility:OPERATING SYSTEMSWindows XP:Windows 2000:+5 VWorstFully supportedFully supportedFully supported32 bits66 MHz or 33 MHz200 MB/s to PC memory (66 MHz PCI;dependent on motherboard and numberof PCI-PCI bridges)PCI-compliant, v.2.2Also v.2.1 systems that supply 3.3 V toPCI slotAll VersionsSP1 or higherTypicalAll Memory Depths 18.25 18.25+3.3 VWorstTypicalAll Memory Depths 6.67 6.67+12 VWorstTypicalAll Memory Depths 0 0-12 VWorstTypicalAll Memory Depths 0 0APPLICATION SOFTWAREGageScope: Windows-based software for programming-free operationLITE Edition:Included with purchase, provides basicfunctionalityStandard Edition: Provides limited functionality of advancedanalysis tools, except for Extended MathProfessional Edition: Provides full functionality of all advancedanalysis toolswww.gage-applied.com

SOFTWARE DEVELOPMENT KITS (SDK)CompuScope SDK for C/C# for Windows*CompuScope SDK for MATLAB for WindowsCompuScope SDK for LabVIEW for Windows*C/C# SDK is compatible with LabWindows/CVI 7.0+ compiler.Visual Basic.NET support available with purchase of C/C# SDK.Contact your Gage Sales Agent for information on Linux support.WARRANTYOne year parts and laborCertificate of NIST Traceable Calibration is included.All specifications subject to change without notice.Notes to specifications:1) Unless otherwise specified, all dynamic performance specs (ENOB, SNR,SFDR, SINAD) are measured at 9.85 MHz with an Input Amplitude of 95%of Full Scale in Direct-to-ADC mode and sampling at 80 MS/s.2) Detailed characterization curves will be available upon request.ORDERING INFORMATIONHardware & UpgradesCompuScope 14200-32M 142-001-002CompuScope 14200-128M 142-001-004CompuScope 14200-1G 142-001-006CompuScope 14200-2G 142-001-007CS14200: Memory UpgradesContact FactoryCS14200: Master Multi-Card Upgrade 142-181-002CS14200: Slave Multi-Card Upgrade 142-181-003eXpert Firmware OptionseXpert Signal Averaging Firmware Option 250-181-001eXpert FIR Filtering Firmware Option 250-181-002eXpert Peak Detection Firmware Option 250-181-003eXpert Firmware Option bundle 888-100-026(Signal Averaging, FIR Filtering and Peak Detection)GageScope ® SoftwareGageScope: Lite EditionIncludedGageScope: Standard Edition 300-100-351(with Purchase of CompuScope Hardware)GageScope: Professional Edition 300-100-354(with Purchase of CompuScope Hardware)Software Development Kits (SDKs)Gage SDK Pack on CD 200-113-000CompuScope SDK for C/C# 200-200-101CompuScope SDK for MATLAB 200-200-102CompuScope SDK for LabVIEW 200-200-103900 N. State St.Lockport, IL 60441-2200Toll-Free (US and Canada):phone 1-800-567-4243fax 1-800-780-8411Direct:phone +1-514-633-7447fax +1-514-633-0770Email:prodinfo@gage-applied.comTo find your local sales representativeor distributor or to learn more aboutGaGe’s products visit:www.gage-applied.comAll Upgrades performed at the factory.Updated July 24th, 2006Copyright © 2004, 2005, 2006 Gage Applied Technologies. All rights reserved.www.gage-applied.com