PUBLIC AUCTION - Maynards Industries

Upon Instructions from the Court-Appointed Receiver, KPMG Inc.PUBLIC AUCTIONMAJOR2 DAYS!THELARGESTAUTOMOTIVE FASTENERMANUFACTURERIN CANADA!WED & THURS, OCT. 17 & 18, 2007 @ 10AM225 HENRY ST. • BRANTFORD, ONTARIO (CANADA)1999UNPRECEDENTEDFASTENERINDUSTRYAUCTION!NEDSCHROEF HBV6L Cold HeaderLATE-MODELEQUIPMENT:Featuring:• (33) Cold Headers• (21) Bolt Makers• Large Quantity ofThreading, Inspection& Packaging Equip.• CNC Machining andTurning• Plant Support Equip.1999 2 AVAILABLENEDSCHROEF NB412 Bolt MakerIndustries Ltd.Auctions • Liquidations • AppraisalsVisit Us On The Web! www.maynards.com5409 Eglinton Ave W 21700 Northwestern Hwy.Suite 202Suite 1180Toronto ON M9C 5K6 Southfield MI 48075Tel: (416) 242-3560 Tel: (248) 569-9781Fax: (416) 242-5085 Fax: (248) 569-9793Unable to Attend?Bid from the comfort of your office,in real time via the internet.To register visit: www.bidspotter.com

(33) COLD HEADERS DAY ONE1999 NEDSCHROEF Herentals HBV6L 4-Die Progressive, 3600kN, 27mm x 247mm Cut-Off, 105-PPM, Part Length Minimum/Maximum 1.15”/7.12”, Timed Knockout, s/n HBVL640-991999 NEDSCHROEF Herentals NHB418 High Speed, 2300kN, 18mm x 170mm Cut-Off, 180-PPM, Timed Knockout, Tool Lift, Sound Enclosure, s/n 41807991996 NATIONAL Formax FXP56S 6-Die, 2000kN, 20mm x 67mm Cut-Off, 190-PPM, Tool Lift,Timed Knockout, Formatrol NC; with Electro-Cam Series 5000 Plus, Multi-Check ProcessMonitor, JP Precipitator, Sound Enclosure, s/n 221301999LONG STROKE(3) 1998 & 1991 NATIONAL Formax FX54L4-Die Long Stroke, 1,400kN, 17.7mm x 190mmCut-Off, 160-PPM, Tool Lift, Timed Knockout,Quick Tool Change Package, HydraulicClamping of Transfer Slide, Formatrol PC, withElectro-Cam 5000 Plus; Sound Enclosure, s/n22194, 22191, 208951996 NATIONAL Formax FX53L 3-Die,1400kN, 17.7mm x 190mm Cut-Off, 160-PPM,Tool Lift, Quick Change Package, Electro-Cam Series 5000 Plus Programmable LimitSwitch Control; Brankamp 3040/3041 ProcessMonitor; JP Precipitator; Sound Enclosure, s/n20970(2) 1998 & 1991 NATIONAL Formax FX44L4-Die Long Stroke, 800 kN, 14.8mm x 158mmCut-Off, 200-PPM, Tool Lift, Timed Knockout,Quick Change Tool Package; with FormatrolPC, with Electro-Cam 5000 Plus, SoundEnclosure, s/n 22820, 20895(2) 1999 NATIONAL Formax FX44M 4-DieMedium Stroke, 800 kN, 14.8mm x 123mmCut-Off, 240-PPM, Formatrol PC, ProcessMonitors, Timed Knockout, and Formapak, s/n22830, 228291999 NATIONAL Formax FX-35M 5-DieMedium Stroke, 500 kN, 11mm x 100mm Cut-Off, 300-PPM, Tool Lift, Timed Knockout, QuickTool Change Package, Formatrol PC, Electro-Cam 5000 Plus, Sound Enclosure, s/n 24890NEDSCHROEF HBV6L Cold Header19966 DIE1999NATIONAL Formax FXP56S Cold Header/Parts Former2NEDSCHROEF NHB418 Cold Header

COLD HEADERS, continued1999 SACMA SP-350EL High Speed 4-Die LongStroke, 1300kN, 15mm x 165mm Cut-Off, 150-PPM,Short Feed Control Unit; Process Monitor, JP 2400CFM Precipitator, s/n 1135K1998 ASAHI SUNAC RH-120, 2-Die, 3-Blow,1200kN, 15mm x 115mm Cut-Off, PKO Stroke .709”,Max Kickout Length 5.128”, 120-PPM, Impax Model500 Process Monitor, Sound Enclosure, s/n 18-047(4) 1981 & 1975 NATIONAL 89, 2-Die 3-Blow,14mm x 150mm Cut-Off, 100/75/50-PPM; TimedKnockouts, Power Feed Rolls, Roll Straightener,Sound Enclosure s/n 40381, 40380, 40325, 40299(4) 1985 & 1981 & 1974 NATIONAL 56, 2-Die,3-Blow High Speed, 9.5mm x 75mm Cut-Off,150-PPM, Timed Knockout; Sound Enclosure, s/n41318, 40993, 40944, 409491998NATIONAL Formax FX54L Cold Header3 AVAILABLE1974 NATIONAL 56 Medium Stroke High SpeedDouble Stroke Solid Die, 5/16”x 2½” , 175-PPM,Positive Knockout, s/n 348041996LONG STROKE1980 NATIONAL 68 High Speed DoubleStroke Solid Die, 3/8”x3”, Medium Stroke,Timed Knockout, 200-PPM, Sound Enclosure,Straightening Rolls, s/n 349601979 NATIONAL 810 ½”x6” - LSDS Long Stroke-Solid Die, 5/8” x 7” Sp. Cut-Off, 110-PPM, SpecialMaximum Kickout 6”, Receiving Kickout, TimeKnockouts, CSG Multi-Check Process Monitor,Power Feed Rolls; Wire Straightener, s/n 34051(2) 1985 NATIONAL 810 LSDS Double Stroke,½ Normal Size, Long Stroke, 110-PPM, TimedKnockout, Helm Trend PG2100 “Part Guard”Process Monitor, s/n 34062, 34054(3) 1974 & 1973 NATIONAL 5/16” High SpeedDouble Stroke Solid Die, 5/16” Nominal Size, 250-PPM, Timed Knockout, Helm Trend PG2100 “PartGuard” Process Monitor, s/n 32920, 32924, 32931NATIONAL MACHINERY ½” Double Stroke SolidDie, Receiving Attachment; Sound EnclosureStraightening Rolls, s/n 337501974 HARTFORD 5-400 5/16” High Speeed SingleStroke Solid Die, Anderson Controls ACE 2000 PlusProcess Monitor, s/n 5504-147-101977 HARTFORD 5-450 5/16” High Speed SingleStroke Solid Die, Helm Trend PG2100 “Part Guard”Process Monitor, Wire Straightener, s/n 5503-154-11(4) NATIONAL 1/2” & 3/8” Cold HeadersNATIONAL Formax FX53L Cold Header1999NATIONAL Formax FX44L Cold Header2 AVAILABLE3

COLD HEADERS, continued19992 AVAILABLE1999NATIONAL Formax FX44M Cold Header1999LONG STROKENATIONAL Formax FX35M Cold Header1998SACMA SP-350EL Cold HeaderASAHI SUNAC RH-120 Cold Header19804 AVAILABLE5 AVAILABLE3 AVAILABLE1981 1985NATIONAL 68 High-Speed Cold HeaderNATIONAL 89 Cold HeaderNATIONAL 56 Cold HeaderNATIONAL 810 LSDS Cold Header4

(21) BOLT MAKERS DAY ONE19901990 NEDSCHROEF BV517E 4-Die, High Speed, 2300kN, 20mmx 190mm Cut-Off, 145-PPM, Part Length, Minimum/Maximum.98”/6.29”, Timed Knockout, Tool Lift, Outboard Discharge, Pointer, FlatDie Thread Roller, Allen-Bradley DL-20 Series Process Monitor, SoundEnclosure, s/n BV517-901983 NEDSCHROEF BV5 4-Die, 2300kN, 20mm x 190mm Cut-Off, 145-PPM, Part Length Minimum/Maximum .98”/6.29”, TimedKnockout new in 1997, Tool Lift, Pointer, Flat Die Thread Roller, newTKO, Allen-Bradley Panel View 600 Process Monitor, Sound Enclosure,JP 2000-CFM Precipitator, (Newer Electornics in 1998), s/n BV502-83,MODERNIZED IN 19981998 NEDSCHROEF NB415 4-Die, High Speed, 1300kN, 15mm x150mm Cut-Off, 210-PPM, Tool Lift, Timed Knockout, Pointer, Flat DieThread Roller, JP Precipitator, s/n NB41509981999 SACMA SP28EL 5-Die, High Speed, 650kN, 10.5mm x 115mmCut-Off, 220-PPM, Short Feed Control Unit; Front Discharge ProcessMonitor, Extra Wire Straightener, Pointer, Flat Die Thread Roller, JPPrecipitator, s/n 97KB1NEDSCHROEF BV517E Bolt Maker19981990 NEDSCHROEF BV435 4-Die, High Speed 1500kN, 16mm x150mm Cut-Off, 180-PPM, Part Length Minimum/Maximum .86”/4.92”,Outboard Discharge, Pointer, Flat Die Thread Roller, Tool Lift, SoundEnclosure, s/n BV435-901989 NEDSCHROEF BV429 4-Die, High Speed 1500kN, 16mm x150mm, 180-PPM, Tool Lift, Timed Knockout, Pointer, Flat Die ThreadRoller, Allen-Bradley DL-20 Series Process Monitor; Impax 1000Process Monitor, Sound Enclosure, s/n BV429-89(2) 1999 & 1998 NEDSCHROEF NB412 4-Die High Speed, 800kN,11.5mm x 125mm Cut-Off, 240-PPM, Tool Lift, Timed Knockout,Pointer, Flat Die Thread Roller, Sound Enclosure, JP 1000-cfmPrecipitator; 2-Stand Straightener s/n NB41211, 412101989 NEDSCHROEF BV312 4-Die, High Speed, 1110 kn, .50”D Cut-Off,210-PPM, Tool Lift, Timed Knockout, Pointer, Flat Die Thread Roller,Impax 1000 Process Monitor, Sound Enclosure, s/n BV312-89NEDSCHROEF NB415 Bolt Maker19831990 NEDSCHROEF BV316 4-Die, High Speed, 1110kN, 12.5mm x130mm Cut-Off, 210-PPM, Tool Lift, Timed Knockout, Pointer, FlatDie Thread Roller Allen Bradley DL-20 Series Process Monitor, SoundEnclosure, JP 2000-cfm Precipitator, s/n BV316-901989 NEDSCHROEF Type BV217, 4-Die, High Speed, 800kN, 10mmx 105mm Cut-Off, 240-PPM, Tool Lift, Timed Knockout, Pointer, FlatDie Thread Roll, Allen Bradley DL-20 Series Process Monitor, SoundEnclosure, JP 2000-cfm Precipitator; 2-Plane Straightener, s/n 217-89(3) 1974 NATIONAL 8L4 4-Die, High Speed ½”x3¾”, 185-PPM; 4-Die,Long Stroke, 185-PPM, Pointer, Tool Lift, Flat Die Thread Roller, SoundEnclosure, s/n 43465, 43466, 43467(2) 1974 NATIONAL 6L4 4-Die, High Speed, 3/8”x3-1/8”, 220-PPM,Tool Lift, Pointer, Flat Die Thread Roller, s/n 43407, N3443NEDSCHROEF BV5 Bolt Maker1975 NATIONAL 6S3 3-Die, High Speed, 3/8”x1 3/4” Short Stroke,250-PPM, Tool Lift, Pointer, Flat Die Thread Roller, s/n 433665

BOLT MAKERS, continuedNATIONAL 5S3 3-Die, High Speed, 5/16”x1¾”,Short Stroke, 300-PPM, Outboard Part Transfer,Pointer, Flat Die Thread Roller, s/n 43256(2) NATIONAL 3/8”x3”, 4-Die, High Speed,Pointer, Flat Die Thread Roller, Impax 1000Process Monitor, s/n 27690, 27672(2) WATERBURY FARRELL No. 3 Bolt Trimmer,Vibratory Hopper Feeder; Chain Type HopperParts Feeder, s/n 37424-37976-101, etc.TOOLING DAY ONELarge Quantity of ThreadDies, Tool Steel Inventory,Carbide InventoryLarge Quantity of Die andPunch CasesPunch Blocks, Die Blocks andTransfersBolster Plates, Elbow Tubesand SpringsPointer and Thread RollingComponents, TransferFingers and KO PinsLarge Quantity of DieTooling StandsExtensive List of Formax,National and NedeschroefSpare Parts1999SACMA SP28EL Bolt MakerLONG STROKE1999 2 AVAILABLE 19902 AVAILABLENEDSCHROEF NB412 Bolt MakerNEDSCHROEF BV4 Bolt Maker6

BOLT MAKERS, continued19902 AVAILABLE2 AVAILABLENATIONAL 6L4 Bolt Maker1989NEDSCHROEF BV3 Bolt Maker3 AVAILABLENEDSCHROEF BV217 Bolt Maker1980NATIONAL 8L4 Bolt Maker NATIONAL 5S3 Bolt Maker NATIONAL 6S3 Bolt Maker7

(23) THREAD ROLLERS DAY ONE1998 E.W. MENN Model GW160-H Horizontal Flat Die Thread Roller, M25, 0.04”to 1”D Capacity125mm Thread Length, 250mm Shank Length, 45-200-PPM,Siemens Coros OP15 Control, Hydraulic Clamping, Motorized Rail Heights and In/Out Adjustment, Discharge, Damage Proctection, Single Piece Takeout, McKnightFC45 Vibratory Bowl, Rodix Feed Cube, s/n FS5500011998 E.W. MENNS Model GW120-H Horizontal Flat Die Thread Roller, M16 (5/8”)Capacity, 300mm (11.81”) Shank Length, Waterbury Die Size 30, 50-300 PPM, s/nES1003911999 SASPI Model GV5-40 S3D High Speed Flat Die Thread Roller, M18 (.708”),100mm (4”) Thread Length, 2-Speed, 50/86 to 75/130, S3D, Equipped with Sems,Washer Assembly Unit; McKnight Hopper, Feed Cube, Midwest Vibratory FeedBowl, s/n 8141993 SASPI Model GV4-30 1E-S3D High Speed Automatic Flat Die Thread Roller,M14 (9/16”) 100mm (4”) Thread Length, 2-Speed 65/80 to 130/160, Equipped withSems, Process Monitor; McKnight Automation Mod. FC41 Vibratory Bowl, Hopper,Feed Cube, s/n 553-93WATERBURY FARRELL #50 Inclined Flat Die Chain FeedThread Roller, Hopper Feeder, Chain Type Hopper Feeder,Cleat Type Parts Conveyor, Digital Parts Counter, s/n 86564-119WATERBURY FARRELL Model #30 Inclined Flat Die ChainThread Roller, Vibratory Hopper Feeder, Cleat Type PartsConveyor, Digital Parts Counter(6) HARTFORD Model 30-180-V Flat Die Thread Roller, 180-PPM, Vibratory Hopper Loader, Vibratory Feed Bowl, TrackFeed, Cleat Type Parts Conveyor, (1 Machine equipped withSEMS unit), s/n 30-197-16, 2-372-38, 30-113-3, 30-112-4,30-174-13, etc(5) HARTFORD Model 20-225 Flat Die Thread Roller, 225-PPM, Vibratory Hopper Loader, Vibratory Feed Bow, TrackFeed, Cleat Type Parts Conveyor, Digital Parts Counter, s/n2-111-4, 2-112-4, 2-149-1, 2113-4, etc1998 1998E.W. MENN GW160-H Thread RollerE.W. MENN GW120-H Thread Roller1999 1993SASPI GV5-40 Thread RollerSASPI GV4-30 Thread Roller8

6 AVAILABLEHARTFORD 30-180-V Thread Roller WATERBURY FARREL #50 Incline Thread Roller WATERBURY FARREL #30 Incline Thread RollerTHREAD ROLLERS, continued(2) HARTFORD Model 10-300 Flat Die Thread Rolliers, 300-PPM,Hopper, Feed Cube, Vibratory Bowl, Cleat Type Parts Conveyor, s/n3-148, etc.(3) SACMA Model RU2-T9 Rotary Die Thread Roller, Vibratory HopperLoader, Vibratory Feed Bowl, Cleat Type Parts Conveyor, McKinightAutomation Hopper, Rodix Feed Cube, Inclined Conveyor5 AVAILABLE1999 VIDEX Model VA-20 Planetary Thread Roller, M12 (½”), 100mm(4”) Length, 150mm (6”) Blank Length, Hyd Clamping, 600-PPM,Variable, Hopper; Rodix Feed Cube, 36” Vibratory Bowl, s/n 389BEAR KAT PRODUCTS INC. SU6 Key International Model BK-30BRotary Die Thread Roller, Vibratory Hopper Loader, Vibratory FeedBowl, Cleat Type, s/n 145032 AVAILABLEHARTFORD 20-225 Thread RollerHARTFORD 10-300 Thread Roller3 AVAILABLE1999SACMA RU2-T9 Thread Roller VIDEX VA20 Planetery Thread Roller BEAR KAT SU6 Thread Roller9

(53) WIRE DRAWERS DAY ONE1999 FASTENER ENGINEERS Model DTVA-6090-52, 60 hp, 90-FPM, 52” Capstan,1.06” Maximum Finished Diameter, S/N 200/80711999(2) 1999 FASTENER ENGINEERS Model DTVA-30110-36 Wire Drawer, 60 hp; 90-FPM, 52” Capstan, 1.06” Maximum Finished Diameter, s/n 200/8103, 1199/8051(4) 1999-1989 FASTENER ENGINEERS Wire Drawer, up to 20 hp; up to 110-FPM,36” Capstan, up to .630” Maximum Finished Diameter, #DTVA-20110-36, s/n1199-8051, # DTVA-30-11-36, s/n 899/8027, # 2020-28, s/n na, # DTVA-05-24, s/n2721394(5) 1999-1990 RMG Model 1214, 20,000lb drawing force, 75”/.82” Capacity, UpTo 60 hp, Up To 133-FPM, 44” Capstan, #1214-60107-73, S/N 90092519, #1214-60106-73, S/N 98084540, #1214-40133-73, S/N 9912/4870, #1214-60133-73, S/N96103961, #1214-50124-73, S/N 94123091992 RMG Model 1011, .62/.68” Capacity, 25 hp, 65-FPM, 44” Capstan, #1011-2564-73, s/n 92062854(8) 1998-1985 RMG Model 910, Up to .56”/.62” Capacity, up to 40 hp, up to 109-FPM,36” Capstan, #910-40108-73, s/n 98084539, 91012593, #910-3081-73, s/n 85091380,86091579, 86091578, 85091379, #910-30108-73, s/n 90092517, 89082297FASTENER ENGINEERS DTVA-6092-52 Wire Drawer2 AVAILABLE1999 19992 AVAILABLE5 AVAILABLEFASTENER ENGINEERS DTVA-30110-36 Wire DrawerFASTENER ENGINEERS DTVA-20110-36 Wire Drawer1998RMG 1214-60133-73 Wire Drawer8 AVAILABLE1998 199920 AVAILABLE6 AVAILABLERMG 910-40108-73 Wire Drawer RMG 89-30106-72 Wire Drawer RMG 67-25129-76 Wire Drawer10

WIRE DRAWERS, continued(20) 1998-1985 RMG Model 89, up to .50”/.56”Capacity, up to 30 hp, up to 133-FPM, 36” Capstan;#89-30133-70, s/n 91012594, #89-30106-70, s/n98084541, 98014383, 98014382, #89-2095-67, s/n89042176, 89042173, 89042175, 89042174, # 89-2065-85, s/n 85061351, #89-25109-70, s/n 85061350,85061348, 9009251, 89042176, #89-2070-67, s/n85071354, 85071353, 89-25109-70, s/n 890822312,85061347, #89-2071-67, s/n 881222075, #89-25106-70, s/n 94053252, 84121239(6) RMG Model 78, up tp .31”/.50” Capacity, 10 hp, upto 66 FPM, 28” Capstan, #78-1060-85, s/n 85101393,85101391, 85101395, 85101392, n/a, #78-2082-21,s/n 101604, #78-2077-20, s/n 906385(6) 1999-1987 RMG Model 67, up to 37”/56”Capacity, up to 25 hp, up to 129-FPM, 28” Capstan;#67-25129-76, s/n 99064807, #67-20102-67, s/n89082311, #67-1089-68, s/n 892032820, 92032820,#67-1061-85, s/n 87081815, #67-2007-20, s/n 70319PAYOFF REELS DAY ONEFASTENER ENGINEERS Model PF-6000-08 Pay-Off Reel(5) FASTENER ENGINEERS DoubleArm Turnstile Type Coil Payoff Stand1998 FASTENER ENGINEERS SingleArm Coil Payoff StandWATERBURY FARRELL Model AV-40Payoff Reel(12) UP TO 1999 FASTENERENGINEERS Model ZF-4000 DoubleArm Turnstile Type Coil Payoff Stand,(Z Flipper), s/n 7-98, 6-99, 11-99, etc.(10) RMG Double Arm Turnstile TypeCoil Stand(Over 10) Rotary Payoff StandsUNCOILERS DAY ONE1996 RMG Model 1216-01 Uncoiler, .75”/1” Cap.,s/n 9605416(3) 1992-1999 RMG Model 1216-02 MotorizedUncoiler with Straightening Rolls, and OptionalClutch; s/n 9911530, 9808489, 9212330BOLT POINTERS DAY TWO1998 OPTICAL BORING CO. Model 15High Speed Pointer, Capacity Min./Max.0.236”/.750”D x ¾”/6” Length, Rated 100 to300-PPM Variable; w/Feed & Exit Ramps; Allen-Bradley “PanelView” 550 Programmable Logic;McKnight Automation Hopper; Feed Cube,Vibratory Bowl, s/n 0B0698134(2) ECONOMY MACHINE TOOL CORP. BoltPointer, with Chain Type Hopper Parts Feeder;Rotary Feeder; and Digital Parts Conveyor,#D15-7, s/n 7325, #D15-4, s/n 730619996 AVAILABLE2 AVAILABLEECONOMY D15-7 Bolt Pointer4 AVAILABLERMG 78-1060-85 Wire Drawer1998OPTICAL BORING 15 Bolt Pointer199910+ AVAILABLERMG 1216-02 Uncoiler25+ AVAILABLERMG 56-0551-01 Wire DrawerRotary PayoffZ FLIPPER Wire Payoff11

(21) BUTT WELDERS DAY ONEMICRO PRODUCTS Model MD5FASTENER ENGINEERS GROUP Model BW-1250, 100 KVA(2) 1999 FASTENER ENGINEERS GROUPModel BW-875 50 KVA(3) 1998/1999 FASTENER ENGINEERSGROUP Model BW-500 15 KVA(12) AUGUST STRECKER Model GMBH Type2B 20 KVAAUGUST STRECKER Model GMGH Type 3B 80KVA(2) MICRO PRODUCTS Model HT .650 to .875AUGUST STRECKER Type 1A 15 KVAINSPECTION DAY ONE & TWO(10) 1999-1998 MECTRON “Qualifier 4000”Model MI-9000 CNC Laser Beam Bolt InspectionSystem, With McKnight Automation MSD108-60 Hydraulic Metal Box Lift; with 5-hpHydraulic System; and 40” x 30” x 30” Platform,McKnight Automation Hopper, FMC syntronmagnetic/vibration feed, Rotary/VibrationBowl Feed, Unload, s/n 4126, 4104, 4206, 4143,4221, 4225, 4106, 4225, etc(2) MCKNIGHT AUTOMATION Bolt, Rivetand Washer Roller Inspection System withMcknight Automation msd 108-60 hydraulicmetal box lift, 5 hp hydraulic system, Mcknightautomation dual feed hopper, FMC syntronmagnetic/vibration feed, (2) Rotary/vibrationbowl feeds, 48” rollersKOHTU Model SS-4 Rotary 5-Laser Beam Boltand Rivet Inspection Digital Counting System,with metal box stand, hopper, FMC suynronmagnetic/vibration feed, rotary/vibrationbowl feed, roller feed, conveyor feed, inspectionsystem, 12” cleated rubber belt inclineunload conveyor1993 SATEC SYSTEMS Model VERTX 60BTEType U.T.M. 60,000-Lb. Capacity UniversalTensile, Tension and Compression TestingMachine; with 30” x 30” Compression Table; 48”Maximum Tension Opening; 9” Power Stroke;Motorized Cross Head Adjustment2000 SST BALDWIN-SATEC SYSTEMS Model5500-220TVL Tension Tester; with Enclosure;and SATEC Mark III Smart Digital IndicatorControls, s/n 3358SINGLETON Model 21 Salt Bath Cabinet, s/n20982MOTT Model 4-7223000 Acid Fume Hood;with 39” x 27” x 42” Chamber; Sink; and AlnorAir Guard 200 Test System, s/n 2216-01ARL FISONS Model 346D AES Spectrometer;with Powerflex Computer; and Fujitsu DL 1150Printer, s/n Unknown1999 NIKON Model Optiphot-100 VideoInspection Microscope; with 2.5X, 5X, 10X, 20Xand 50X Lenses; Panasonic GP-KR222 Camera;Computer System; Monitor Display; and Buehler“Copymate II” Model M40190 EnlargementSystem, s/n 331688MITUTOYO Model PH3500 Profile Projector;14” Diameter Screen Equipped with MicropakII Digital Display/Readout, s/n 900132(3) JONES & LAMSON Model PC-14A 14” OpticalComparator; with 6” x 30” Work Stage; and10X Lens, s/n E37966, E-45949, E-45729JONES & LAMSON Model TC-14 14” OpticalComparatorJONES & LAMSON Model FC-14 14” OpticalComparator & Measuring Machine; with 6” x30” Work Stage; 10 to 100X Lens; and ReflectionAttachment, s/n E257682 AVAILABLEQty. of Butt WeldersKOHTU SS-4 Rotary Laser Beam Bolt and RivetInspection SystemMcKNIGHT AUTOMATION Bolt and RivetInspection System10 AVAILABLE1999 2000MECTRON Qualifier 4000 CNC Laser Beam Bolt InspectionFTI INTERNATIONAL 2-Bolt Ferrule Assembly System12

INSPECTION, continuedSURFACE 3600 GeneratorSurface Combustion Draw FurnaceFurnace1990JONES & LAMSON 14” Optical Comparator,with 6” x 30” Power Work Stage; 10X,20X, 3.25X, 50X, 62.5X, and 100X Lenses; J&LNovalite Projection Unit; and J&L “DecimetricII” 2-Axis Digital Readout, Cart Mounted, s/nE56041WILSON Model Tukon Series 200 PrecisionElectronic Micro Hardness Tester; with Javelin8” Monitor; and Boeckeller V1A-110 Controller,s/n 922383WILSON Model B523T Series 500 Digital RockwellHardness Tester, s/n 815506101997 WILSON Model C-523S Digital RockwellHardness Tester, s/n 97324711PACKAGING DAY ONE1998 IMAN PACK FULLY AUTOMATIC PACK-AGING includes Twin Weighhead Master ScalePackaging Line, 338” Chain Driven Metal Boxload to chain drive roller; with ransfer to unloadmetal box, chain driven metal box dumpingelevator (4400 lb capacity), hoppers, (2)weighing and load stations (Paid $550,000USF)(2) PACKAGING SYSTEM INCLUDES LoaderFeeder, Vibratory Feeder; Western PackagingSystem Model AE2 Packager, Pneumatic CanLid Closer, Motorized Roller Conveyor; LabelingMachine, Digital Package Taping Machine,Jib Cranes, and Allen-Bradley PLC control, s/n95BThis brochure is onlya partial listingVISIT OUR WEBSITE FOR MOREDETAILED LISTINGS AND PHOTOSwww.maynards.com(2) 2000 WILSON Model Series 2000 DigitalRockwell Hardness Testers, s/n P3252, P3253(2) 1994 WILSON Model B 523-T Series500 Digital Rockwell Hardness Tester, s/n94295110, 94430204ACCO WILSON Model 4E-JR RockwellHardness Tester, s/n 8849-581LARGE QTY: Imperial Gauges; Metric Gauges;Block Gauges; Thread Gauges; BuehlerCabinets; Desks; Cabinets; File Cabinets; OfficeChairs; 4-Wheel Carts; Torque Wrenches;Computers; Printers; Dermitron D-3000 PlusCoating Thickness Gauge; Wilson 3JR HardnessTester; Bausch & Lomb SZ-6 Microscope;Olympus Model PME Microscope; etc.PACKAGING SYSTEM INCLUDES ChainDriven Load Conveyor; Rapistan Loader;Hopper; Vibratory Feed Container; Roller TypeMotorized Discharge Conveyor; PackagingStation, Digital Scale, and Bar Code Printer(6) STERLING SCALE CO. Model XC780N-2Digital Scale; with 12” x 10” Top Platform; 48”x 48” Above Ground Platform; and CardinalModel 740 Printer, s/n 0446, etcMULLER “Insta-Pak” Model ECA800 55” AutomaticRotary Pallet Stretch Wrapping System;5’ Capacity; with Rotary Transfer Indexing, MotorizedRoller Load Conveyor; Motorized RollerUnload Conveyor; and Gravity Type UnloadRoller Conveyor, s/n 83930690MULLER “Infa-Pak” Model Sidewinder RotaryPallet Stretch Wrapper; with 48” x 48” RotaryTablesLARGE QTY: Power and Gravity Transfer andPackaging ConveyorT&T AC GeneratorWESTINGHOUSE SwitchgearGCA 3040 Vacuum Furnace13

ASSEMBLY DAY ONE1999 FTI INTERNATIONAL2-Bolt/Ferrule Assembly System;60-PPM, 6-Heads; with 18”DRotary Indexing Table; RejectionChute; and Unload Chute withMcknight Automaton modelMSD108-60 hydraulic metal boxlift with 40” X 30” X 30” Platform,McKnight automation1999 HTC Custom FabricatedC-Frame Hydraulic Press, , S/N99-256; 4-5/8” LR x 3” FB Bolster,6-3/8” LR x 4-3/4” FB Bed Area,2-3/4” Throat; with Controls; andVickers Model 3028723 1-1/2-hpHydraulic System, s/n 99G-31747-01HEAT TREAT DAY ONE(2) SURFACE COMBUSTION 4000 lb/hourcontinuous heat treat line complete Iman packloading system, pre hardening washer, hardeningfurnace, (u tubes), quench system, pre drawwasher, draw furnace and soluble quench systemSURFACE COMBUSTION 2000 lb/hour continuousheat treat line complete Iman pack loadingsystem, pre hardening washer, hardening furnace,(u tubes), quench system, pre draw washer, drawfurnace and soluble quench systemSURFACE COMBUSTION 2000 lb/hour continuousheat treat line complete Iman pack loadingsystem, pre hardening washer, hardening furnace,(w tubes), quench system, pre draw washer, drawfurnace and soluble quench system(2) SURFACE COMBUSTION anneal lines completewith loading system, pre washer, anneal furnace andunloading conveyor1982 GCA/VACUUM INDUSTRIES, INC. Model 3040Series 3530 Electric Vacuum Furnace, S/N 41775; 35kW, with 32”D x 53”O.D. Chamber; Welch 3-hp VacuumPump, Digital Controls, and Saban 45-kva SaturableReactor, 288 Watt, s/n 44924GENERATORS DAY ONE1990 T&T Diesel Power AC Generator; 11 kW, 1,800rpm; with Thomson ECR444 Engine Controller; and FuelTank, s/n 10627T&T Diesel Power AC Generator; 11 kW, 1,800 rpm; withThomson ECR444 Engine Controller; and Fuel Tank, s/n1022219981999DAEWOO-PUMA 300C CNC Turning Center19993 AVAILABLEIMAN Twin Weighed Master Scale Packaging LineHARDINGE CHNC II SP CNC Turning Center2 AVAILABLE1999 2000 20012 AVAILABLEHITACHI 23RIII CNC Turning Center YANG SML-12 CNC Chucker FADAL VMC4020 CNC Machining Center14

GENERATORS, continued(2) SURFACE 3600 CFH-RX Gas Fired GasEndothermic Generator, 3.3 kva; with Controls, s/n339G, 340GSURFACE 2400 CFH-S2RX Gas Fired Gas EndothermicGenerator 3.5 kva; with ControlsCNC MACHINES DAY TWO1998 YANG Model ML-28A CNC Turning Center;21.65” Swing Over Bed, 11.02” Turning Diameter,20.47” Turning Length, 23.62” Between Centers,Travels: X=8.5”, Z=20.5”, 2.4-hp Motor, 1.2-hp Motor,8” Spindle Bore, High Torque 20/25-hp SpindleMotor, 12-Tool Automatic changer, s/n E-30101999 DAEWOO-PUMA Model 300C 3-Axis CNCTurning Center; 22.4” Swing Over Bed, TurningLength, 51.18” Between Centers, Travels: Z=20.5” -2.4-hp Motor, X=8.5”, 3.5” Spindle Bore, High Torque18.5 hp Spindle Motor, 10-Tool Turret, ManualTailstock; with Fanuc control, s/n PM25075(3) UP TO 1999 HARDINGE CHNC III SP ModelCN III Super Precision CNC Chucker/Bar Machine-Flat Bed Lathe; 14” Swing Over Bed, 8” TurningDiameter, 8” Threading Diameter, Vertical Slide,8-Tool Turret, 1-5/8” Collet Spindle Bar Capacity,s/n C3-342-SP, C3-337-SP, C3-363-SP1999 HITACHI SEIKI Model 23RIII 2-Axis TurningCenter; 15” Swing, 10” Turning Diameter, 23.6”Turning Length, 2.5” Bar Capacity, 20-3600 rpmSpindle Speeds, Equipped with 10-Position ToolHolder, Main Motor HP LNS Quickload Servo S2Bar Feeder, Seicos A10, s/n NR30164(2) 1999/2000 YANG Model SML-12 3-Axis CNCChuckers; 14” Swing, 6000 Max. Speeds, 6” chuck,9” X Travel, 7/10 hp, 6-Position Tool Holder, 1.3”Bar Capacity, with Fanuc 0-TD CNC Control, s/nC00614, C00700(2) 2001 & 1998 FADAL Model 906-1 VMC4020HTHigh Torque 15-hp Spindle Motor 3-Axis CNCVertical Machining Center; 20” x 47.94” Table Size,10,000 rpm High Torque, 21-Tool ATC, Travels:X=40”, Y=20”, Z=20”; with Fadal CNC 88HS CNCControl, s/n 9807348, 0120010011884LATHES DAY TWODEAN SMITH & GRACE (DSC)Model Type 1709X60 18”/25” x 60”C.C. Geared-Head Gap Bed EngineLathe; 16 to 2,000 Spindle rpm,3-1/4” Hole Through Spindle; with3-Jaw Chuck; 4-Jaw Chuck; ToolPost; Thread Dial; Taper; Drill Attachment;and Coolant SystemOKUMA Model Type LS 20” x 60”C.C. Geared-Head Engine Lathe;38 to 2,000 Spindle rpm, 2” HoleThrough Spindle; with 3- and 4-JawChucks; Face Plate; Thread Dial; Tailstock;Coolant System; and SteadyRest, s/n 4411-1580HARDINGE Model HSL-5L BenchDovetail Bed Polishing Lathe; with1/2-hp Motor; and Stand, s/n HSL-5C-4004 AVAILABLE1999KELLENBERGER 600U ID-OD GrinderTOS SN32-1000 Gap Bed LatheFERRO-18 Engine LatheMYFORD MG-12-ME Grinder2 AVAILABLE1998SUNNEN MBB-1660 HonesCINCINNATI No. 2 Centerless GrinderDOALL C-80 Horizontal Band SawHARDINGE Dovetail Lathe1995SUNNEN EC-3500-D HoneSUNNEN CV-616 HoneROYAL TG12X4 GrinderDOALL 1612-3 Band SawENERPAC Hydraulic Press15

JONES & SHIPMAN O.D. Grinder OKUMA Engine Lathe RAMBAUDI Versamill Milling Machine10+ AVAILABLEMETACUT Star 2000 Cut-Off Saw MITUTOYO Optical Comparator MOTIVATION Jib Crane MULLER Stretch WrapperLATHES, continuedHARDINGE Model DV-59 Second OperationDovetail Bed Lathe; 150 to 3,500 rpm; withLever Type Collet Closer; and Tailstock, s/nDV59-12098(4) CMT TORTONA Ferro-18 18” x 36” Geared-Head Lathe, 46 to 2,000 rpm, 2” Spindle Bore;with 3-Jaw Chuck; Tool Pot; Thread Dial; andTailstock, s/n CMT4954, CMT5436, CMT4296,CMT4524HARRISON 11”/16” x 24” C.C. Geared-HeadGap Bed Lathe, 45 to 2,000 rpm, 1-3/4” HoleThrough Spindle; with 3-Jaw Chuck; Tool Post;Thread Dial; Coolant System; and CabinetBase, s/n 121293HARDINGE Model HC Precision DovetailBed Lathe; 125 to 3,000 Spindle rpm; with8-Station Turret; Power Carriage Feed; andLever Type Collet Closer, s/n HC-3821-N1999 TOS-TRENS Model SN32-1000 GapBed Engine Lathe; 14 to 2,500 rpm, 2-1/4”Spindle Bore, 12” Swing, 20” Swing In Gap, 44”Center To Center; with 3-Jaw Chuck; Tool Post;Threading and Dial; Micrometer Stop; CoolantSystem; and Fagor 2-Axis Digital Readout161998 TOS-TRENS Model SN63C-1500 GapBed Engine Lathe; 10 to 10,000 rpm, 3”Spindle Bore, 25” Swing, 34.5” Swing In Gap,60” Center to Center, 13-1/2” Swing OverCross Slide; with 3-Jaw Chuck; Tool Post;Threading and Dial; 10-hp Micrometer Stop;and Coolant(7) HARDINGE Model HLV-H Precision DovetailBed Lathe; 125 to 3,000 Spindle rpm;with Lever Type Collet Closer; and PowerCarriage Feed, s/n HLV-H-3991, HLV-H-1950,HLV-H-1820, HLV-H-1595, HLV-H-3899, HLV-H-4812, HLV-H-2055(2) CMT TORTONA Model Ferro-20 20”/31”x 60” C.C. Geared-Head Gap Bed EngineLathe; 35 to 1,500 Spindle rpm, 4” HoleThrough Spindle; with 3-Jaw Chuck; ToolPost; Thread Dial; and Coolant System, s/n5183-CMT3873, 5861-CMT46801999 HARDINGE Model HSL 8” Dovetail BedSpeed Lathe; with 3-1/2” x 12” Bed; and 1/2-hp Motor, s/n HSL-5C-7237-T1980 HARDINGE Model HSL-5C DovetailBed Polishing Lathe, 1/2 hp; with Stand, s/nHSL-5C-4498-TGRINDERS DAY TWOKELLENBERGER Model 600U UniversalI.D./O.D. Grinder, 12” Swing, 6” x 33” Bed; with1-1/2-hp Spindle Motor; 15” Wheel; Controls;Coolant System; and Heidenhain 2-Axis DigitalReadout, s/n 32462-2449CHURCHILL Model NB 8” x 24” Hydraulic SurfaceGrinder; with Eclipse 8” x 20” PermanentMagnetic Chuck; Ideal Demagnetizer; andDust Collector, s/n 1155/ECINCINNATI Model #2EA Centerless Grinder;with Hydraulic Dresser; and Manual Dresser,s/n 2M2H1P-847BOFORS-KINGSBURY-JOHNASSON Model1UC Cylindrical Grinder; 12” x 40” C.C. Capacity;with 15-hp Wheelhead Motor; 1-hp SpindleMotor; and Coolant Filtration, s/n BJ-101LANDIS TOOL Model Type 1R Plain I.D./O.D.Universal Grinder; 10” x 20” C.C. Capacity; with3-hp Wheelhead Motor; 1-hp Spindle Motor;and 12” x 1-1/4” Wheel Capacity, s/n 883-4ROYAL MASTER Model “Precis-O-Matic”TG-12X4 Precision Centerless Grinder, withHydraulic Dressers; , s/n 1522 (1999 Rebuild)

GRINDERS, continued(2) BROWN & SHARPE Model 1024 Micromaster 10” x 24”Hydraulic Surface Grinder; with 10” x 24” ElectromagneticChuck; Control; Wheel Guard Dresser; 3-hp Spindle Motor;and Coolant System, s/n 523-1024-455, 523-1024-406MYFORD Model MG12-ME Cylindrical Grinder, 5” x 12” Capacity;with Live I.D. Spindle Attachment, s/n SME151547CINCINNATI Model MT Monoset Tool & Cutter Grinderwith 6” x 30” Swivel Table; Motorized Workhead; 3-JawChuck; Motorized Wheelhead; and Tailstock, s/n1D2F1AAF135, Asset #824CINCINNATI MILACRON Model ATI Tool & Cutter Grinderwith Dust Collector, s/n 1D2F1AAF134BROWN & SHARPE Model 824 Micromaster HydraulicSurface Grinder; with Eclipse 8” x 23” ElectromagneticChuck; Coolant System; and Dust Collector, s/n 523-824-328CINCINNATI Model No. 2 Centerless Grinder; with InfeedWork Rest; Hydraulic Grinding Wheel Dresser; ManualRegulating Wheel Dresser; and Coolant System, s/n2M2H1K-107, 2M2HIL-780(15) Tool and Pesdestal GrindersMILLING MACHINES DAY TWO(2) 1979 RAMBAUDI “Ram-Mill” VerticalUniversal Milling Machine; 50 to 3,000Spindle rpm; with 20” x 63” Power Table; andAnilam Wizard 3 Axis Digital Readout, s/n RM-622, RM-859KEARNEY & TRECKER MILWAUKEE ModelC-12 Variable Speed Vertical Milling Machine,37 to 1,575 Spindle rpm; with 12” x 52” Table,s/n 0499RAMBAUDI Model MS3 Variable SpeedUniversal Vertical/Horizontal Milling Machine,25 to 1,500 Horizontal Spindle rpm, 40 to3,500 Vertical Spindle rpm, 12” x 51-1/2”Power Table Size, s/n 76869 I.D. #M-90688RAMBAUDI “Versamill-12” HorizontalUniversal Milling Machine; 22 to 2,000 Spindlerpm; with 20” x 63” Table; Pendant Control;and Acu-Rite “Master-MP” 3-Axis DigitalReadout, s/n RM-197RAMBAUDI Model MG3 Variable SpeedVertical Milling Machine ; 40 to 3,500 Spindlerpm, 12” x 51” Power Feed Table Size; withCoolant System, s/n MG-381HONES DAY TWOSUNNEN Model CV-616 “CylinderKing” Automatic Precision VerticalCylindrical Honing Machine; with3-Jaw Chuck; Load Meter; andTooling, s/n 10861995 SUNNEN Model EC-3500-DAutomatic Horizontal HoningMachine; with Power Stroking;.125” to 2.0” Automatic Sizing, s/n2S1-10291980 SUNNEN “1801” Model MBC-1801-M Power-Stroker PrecisionHone; with Assorted Mandrels; andStones, s/n 11211(2) SUNNEN Model MBB-1800Power Stroker Precision Hone; withMandrels & Stone Sunnen ToolCabinet, s/n 17028,71001(3) 1998 SUNNEN Model MBB-1660-K Precision Honing Machine,s/n 3V1-94203, IVI-94465, 2X194832SUNNEN Model MBB1650 PrecisionHoning Machine, with DialIndicator; and 1/3-hp Motor, s/n11175(2) SUNNEN Model PG-800C-SPrecision Hole Gages, s/n 82028 &82036SUNNEN Model PG-700-C PrecisionHole GaugeARL Fisons 346D SpectrometerTOS SN63C-1500 Gap LatheLARGE QTY: Honing Mandrels andTooling5 AVAILABLE19932000SACK & KISSELBACH Hobbing Press SATEC 60BTE Tensile Tester SST BALDWIN Tension Tester BROWN & SHARPE Surface Grinder17

PRESSES DAY TWO(5) SACK & KIESSELBACH 630-Ton HydraulicHobbing Press; with 18” x 18” Work Area; HydraulicPower Unit; Inching Control; and Enclosure, s/n31774, 31773, 31775, 31187,29985ROGERS-ENERPAC Approximately 60-Ton ShopBuilt H-Frame Hydraulic Shop Press, s/n Unknown,34” Between Post; with Enerpac Hush PumpHydraulic Power Unit; and EnclosureSAWS DAY TWOBUEHLER Model 10-1030 10” Abrasive Wheel Cut-Off Saw, s/n UnknownDOALL Model 1612-3 16” Vertical Band Saw; with30-1/2” x 24” Tilting Table; and Blade Welder/Grinder, s/n 151-751132DOALL Model C-80 Automatic Horizontal BandSaw; 12” x 16” Capacity; with Hydraulic Clamping;Hydraulic Clamp Feed Roller Conveyor; and RollerConveyor, s/n 190-73334(2) BUEHLER Model 10-1030 10” Abrasive WheelCut-Off Saw, s/n Unknown, Asset #43WELDERS DAY TWO1997 MILLER Dimension452 CC/CV-DC 450-Amp ArcWelder; with Miller S-22AWire Feed; Mig Gun; Leads;and Cart, s/n KH489099AIRCO Model 3DDRS-245-C300-Amp Dual RangeBumblebee D.C. RectifierArc Welder; with ElectrodeGun; Leads; and Cart, s/nCN-62361HOBART Model TR-300300-Amp Arc Welding PowerSource; with Cables; Leads;and Cart, s/n 77WS08632LINCOLN 250-Amp MotorGenerator Arc Welder, s/nUnknownOxygen/Acetylene Torch Set;with Gauges; Torch; and CartGENERAL EQUIP. DAY TWOEMPIRE Model MH-26365 Shot Blast Cabinet, s/n C-2084,with Empire Model DCR-80 Dust Collector, s/n C-20851997 NEDERMAN Filler Box Type Smoke Eater, s/n FB1500;Cart Mounted; with 1-hp Motor; and 3-hp Blower MotorDAVIS Model No. 1 Keyseater, with 18-1/2” x 25” Worktable;and Assorted BroachesALFA LAVAL Type TSK 100A Micro Separator CentrifugalCoolant Cleaner; with Full-Automatic Micro SeparatorControl Panel; Marcus 15-kva Transformer, s/n 335-399; andHoses, Skid Mounted, s/n 10-0015WALKER Filtration Inline Filter1999 BEKO “Owamat 6” Model Z-54.5 - 110 Oil/WaterSeparator, s/n 4851411999 MOTT Model 4-7223000 Laboratory Fume Hood; withAcid Wash Tank; and 3/4-hp Polypropylene Centrifugal Fan,s/n 3274-01(2) BUEHLER Dual 8” Polishing Bench with SinkBUEHLER Motopol 2000 12” Grinder/Polisher, Power Head19994 AVAILABLEINGERSOLL-RAND SSR-EP150 Air Compressor1999GON Dumpers2 AVAILABLEINGERSOLL-RAND TM400 Air Dryer WILSON Hardness Tester BUEHLER Grinder Polisher WILSON Series 200 Microscope182000

GENERAL EQUIP., cont.BUEHLER Model Simplimet 2000Automatic Mounting Press, DigitalReadoutAIR COMPRESSORS DAY TWO(4) 1999-1998 INGERSOLL-RAND Model SSR-EP150 RotaryScrew Type Air Compressor; 150hp; with Intellisys PLC; and SoundEnclosure, s/n F35997U98107,F35998U98107, F36971U99293,F36966U99257(2) 1990 INGERSOLL-RAND ModelSSR-EP125125HP Rotary Screw AirCompressors, s/n F0492U90; andF0494U90(4) 1994 ZEKS Model 500HSCA600Refrigerated Air Dryers, s/n51582E-1; 51582E-1; 59348-1; and59348-21999 INGERSOLL-RAND ModelTM400-E6X Refrigerated Air Dryer,s/n 99LTM8631994 ZEKS Model 1000HSCA 400Refrigerated Air Dryer; with 1-hpMotor; and Vertical Air ReceiverTank, s/n 945311999 ATLAS COPCO Model GA1825-hp Package Type Rotary ScrewAir Compressor, s/n AII-24270;104 cfm; with Devair 120-GallonVertical Air Receive Tank, (1998)1999 MANCHESTER 660-GallonVertical Air Receiver TankMOBILE EQUIP. DAY TWO(4) 1990 TCM Model FCG25N6T4,600-Lb. Capacity Natural Gas ForkLift; 189” Lift, 3-Stage Mast, SolidTires; with Overhead Guard, s/n48803747, 48804259, 48805629,488058591997 KOMATSU Model FG30SGT6,000-Lb. Capacity Natural GasFork Lift; 60-1/2” Lift, 2-Stage Mast,Solid Tires; with Overhead Guard,s/n 493329A(13) UP TO 1999 KOMATSUModel FG25ST-11 5,000-Lb.Capacity Natural Gas Fork Lift; 128” Lift, 2-Stage Mast, SolidTires; with Overhead Guard; andRotator Fork Attachment, s/n403958A,403959A, 404229A,40228A, 404360A, 405846A,406774A, 508491A, 509909A, 5(2) 1999 KOMATSU ModelFG30SHTLP-12 6,000-Lb. CapacityNatural Gas Fork Lift; 128” Lift,2-Stage Mast, Solid Tires; w/Overhead Guard & Coil PostAttach., s/n 508560A, 511144ATENNANT Model 235 ElectricRiding Floor Sweeper/Scrubber;with Battery Charger, s/n 235-18861990 BT PRODUCTS Model RT-2000 E/5 2,000-kg Electric StandUp Rider Narrow Aisle Fork Lift;2-Stage Mast, Solid Tires; withExtendable Forks; OverheadGuard; and Battery Charger, s/n2155402003 BT PRODUCTS Model RRB11600-kg Electric Stand Up RiderNarrow Aisle Fork Lift; 2-StageMast, Solid Tires; with ExtendableForks; Overhead Guard; andBattery Charger, s/n 572061AACLARK Model C500-50 5,000-Lb.Capacity Natural Gas Fork Lift, 130”Lift, 2-Stage Mast, Solid Tires; withOverhead Guard, s/n 355-3414-26ADVANTAGE Model 3800 ElectricRiding Floor Sweeper/Scrubber;with Battery Charger, s/n 1243019CONDOR Model 47E manliftLarge Mobile Repair Area with Bear40-504 Engine Analyzer, HydraulicLift Ramp, Mobile Equipmentrepair toolsCRANES DAY ONE & TWOP&H 2 Ton Overhead Crane on 14’x 25’ Freestanding Support(17) LARCO, UNIFRAN & KONE3-4,000 lbs Capacity Bridge CranesMENTOR Model Dyna Lift 2-Ton x9’ Span Single Girder UnderhungFree Standing Runway TravelingBridge Cranes; with CM 2-TonElectric Chain HoistUNIFRAN 12-Ton x 20’ SpanPortable A-Frame Gantry Hoist;with 12-Ton Chain HoistDEMAG 2-Ton Electric Hoist;Mounted on Floor Standing 8’ JibCrane, 360-Degree Rotation(3) DEMAG 1-Ton Electric Hoist;Mounted on New LondonEngineering Floor Standing 8’ JibCrane, 360-Degree RotationCANADIAN MONORAIL 2-Ton x10’ Span Single Girder UnderhungFree Standing Runway TravelingBridge Crane; With P&H 2-TonCable Hoist; 4-Way ControlsMATERIALS, PARTS & SUPPLIES DAY TWO(OVER 60) Self-Dumping Bins to 1/2 Yard Capacity(15) VIDMAR Tool Cabinets(8) Portable Shop Offices to 15’x40’(OVER 75) Spare Motors to 150hp(OVER 420) Sections of heavy duty Pallet rackingLARGE QTY. OF Maple Top Work Benches, Vises, Cabinets, Stock Racks,4-Wheel Carts, Lathe Tooling, Milling Vises, Shelves, Part Bins, Stools,Super Spacers, Rotary Table, Tool Holders, Boring Bars, Jib Cranes, ChainFalls, Canadian Bench Drill Press, Assorted Motors, Perishable Tooling,Telemotive Digital Remote Controls, Metal Work Tables, Hydraulic PumpType Die Trucks, Shop Fans, Acetylene/Oxygen Torch Sets, Grease Guns,Chains, Slings, Welding Supplies, Barrel Rack, Demagnetizers, PlugGauges, Parts Washing Tanks, Sulfur Hot Pots, Digital Indicators, BenchArbor Press, Thread Gauges, Hand Tools, Air Tools, Electrical Tools, ShopVacuums, Mist Collector, Pallet Trucks, Granite Surface Plates, HeightGauges, Band Filer, Steel Stamp Sets, Steel Layout Plates, etc.ELECTRICAL SUPPORT EQUIPMENT DAY TWO1995 WESTINGHOUSE Distribution Panel, 4000 amp w/(3) SectionSwitchboard and S&C 25,000 amp switch gear(10) ALLEN-BRADLEY 2 and 3 Section MCC’sHuge Quantity of Electrical Teck Cable and TrayOFFICE EQUIPMENT DAY TWOLARGE QUANTITY OF Workstations, Desks, Chairs, Conference Table,File Cabinets, Fax Machines, Printers, Copiers, Personal Computers,Televisions, Typewriters, etc.23 AVAILABLEView of ForktrucksCONDOR 47E ManliftLarge Qty. of ToolingTENNANT 235 Floor ScrubberLarge Qty. of Racking400+ SECTIONS19

BANKRUPTCY AUCTIONWEDNESDAY & THURSDAY, OCTOBER 17 & 18, 2007 @ 10AMMaynards Industries250 H StreetPMB 207Blaine WA 98230225 HENRY ST.BRANTFORD, ON (CANADA)Preview: Mon & Tues, October 15 & 16 from 9am-4pmTHE LARGESTAUTOMOTIVE FASTENERMANUFACTURERIN CANADA!DAY ONE: All Fastener & Fastener Related Equipment,Cold Headers and Bolt MakersDAY TWO: All Machining and Plant Support EquipmentDRIVING DIRECTIONS:From Lester B. Pearson International Airport, Toronto ONTotal distance: 56.5 mi Est. time: 1 Hour, 5 MinutesTurn LEFT to stay on Britannia Rd E; Turn LEFT onto RR-4 South /Dixie Rd; Turn RIGHT onto Eastgate Pkwy; Merge onto Hwy-403 West;Take ramp LEFT to Hwy-407 Etr West; Take ramp LEFT to Hwy-403West; Take ramp RIGHT toward Garden Ave. / Cainsville; Turn LEFT ontoGarden Ave; Turn RIGHT onto Henry StACCOMMODATIONS:Holiday Inn .................................................... (519) 758-9999Best Western ................................................. (519) 753-8651Comfort Inn .................................................... (519) 758-3100Industries Ltd.Auctions • Liquidations • AppraisalsTERMS & CONDITIONSPayment: MUST BE MADE IN FULL DAY OF SALE. payment is cash,cashier’s check, certified check, wire transfer, companycheck only if accompanied by a letter from your bankguaranteeing amount of check for deposit and/or payment infull. no personal checks. full payment must be made beforeremoval of purchase.REMOVAL: SMALL ITEMS BY OCTOBER 26, 2007 AND LARGE ITEMSBY NOVEMBER 16, 2007, and as further defined in the salecatalogue. everything is sold “as is, where is”. all salesfinal. cost and responsibility for removal of purchaseremains with the purchaser. every effort will be maDe tofacilitate removal. while quantities and descriptions arebelieved to be accurate, the auctioneer, owners or counselmake no warranties or guarantees either expressed orimplied as to authenticity, genuineness of, or defects in anylot and will not be held responsible for any advertisingdiscrepancies or inaccuracies. no warranties whatsoeverare made as to condition, merchantibility or fitness for useof any item. may we suggest you take full advantage of thepreview and inspection period. sale subject to additions,deletions & PRIOR SALE.ALL SALES WILL BE INU.S. DOLLARSBUYERS PREMIUMS:12% ON-SITE, 15% ON-LINEVisit Us On The Web! www.maynards.com5409 Eglinton Ave W 21700 Northwestern Hwy.Suite 202Suite 1180Toronto ON M9C 5K6 Southfield MI 48075Tel: (416) 242-3560 Tel: (248) 569-9781Fax: (416) 242-5085 Fax: (248) 569-97931999 NEDSCHROEF HBV6L Cold Header(2) 1999 NEDSCHROEF NB412 Bolt MakersUnable to Attend?Bid from the comfort of your office,in real time via the internet.To register visit: www.bidspotter.com