WinTracâ¢ 5.X

More documents

Recommendations

Info

Chapter 9Advanced WinTrac FeaturesUsing Service Modification feature on Thermo King UnitsUnits based on Thermo Kings Global Data Table (DAS, HMI, i-Box, SR-2/SR-33 etc.) can be directlyconfigured from WinTrac using the Service Modification facility. Use of the Service Modification feature mayalter the operation of the Thermo King refrigeration unit. We recommend this feature be used by trained TKService Personnel only.A .CSV format file containing the desired settings can be uploaded into the unit. To accomplish this, select the"Service Modification..." option from the "Tools" menu in WinTrac. The "Tools" menu item is a securefunction. If you need to perform a modification and do not have the "Tools" menu option showing, please readthe Section entitled “Accessing the Tools menu in WinTrac 5”. WinTrac will ask you for the name of themodification file you wish to send to the unit. Once the file is selected, WinTrac checks the connections to theunit and if they are valid will send the modification data to the unit and check the changes were accepted.Using pass-through mode on DASWinTrac 5 contains a feature called "Pass-through" for DAS devices with the MP-VI controller. The passthroughfeature allows you to access the attached controller as if WinTrac was connected directly to thecontroller. Using pass-through mode, you can perform all the usual WinTrac tasks such as down-loading thecontroller data logger, flash-loading the controller, send or retrieve OptiSet configuration data, etc. Access tothe pass-through features is from the Tools menu. In order to enter pass-through mode, you must beconnected to a DAS with an attached controller.NOTE: The unit must be switched "ON".Select "Enter pass-through mode..." from the "Tools" menu. WinTrac will set-up pass-through mode andconfirm when pass-through is complete. You can then communicate directly with the attached controller andperform any of the normal WinTrac functions on the controller.When you are finished, you should always exit pass-through mode by selecting "Exit pass-through mode" fromthe "Tools" menu.NOTE: If you do not EXIT pass-through mode properly, the DAS and controller will eventually time out frompass-through after 15 minutes and reset, however, all communications are suspended during this 15 minutetime out period and data may be lost. Proper EXIT of the pass-through mode allows normal DAS/controllercommunications to resume immediately.84
Chapter 9Advanced WinTrac FeaturesConfigure iBoxWinTrac can be used to configure your iBox settings. By selecting “Configure iBox…” from the tools menu withan iBox connected, you will be able to change various settings on the iBox, including the countdown timer andprotocol selection.85
Page 1 and 2:
WinTrac 5.XUser GuideTK 54890-8-MS
Page 3:
Table of ContentsChapter 1 ........
Page 7 and 8:
Chapter 1Welcome to WinTrac Softwar
Page 9 and 10:
Chapter 1Welcome to WinTrac Softwar
Page 11 and 12:
Chapter 2Installing your WinTrac 5
Page 13 and 14:
Chapter 3Personalizing your WinTrac
Page 15 and 16:
Chapter 4Communicating with your Th
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Chapter 4MPIV, MPV, MPVI SettingsCo
Page 39 and 40: Chapter 4Communicating with your Th
Page 51 and 52: Chapter 4VPRS SettingsCommunicating
Page 61 and 62: Chapter 5Managing your WinTrac Data
Page 67 and 68: Chapter 6Viewing your Data Graphica
Page 69 and 70: Chapter 6Viewing your Data Graphica
Page 71 and 72: Chapter 7Viewing your Data in Tabul
Page 77 and 78: Chapter 8Personalizing the DisplayT
Page 79 and 80: Chapter 8Personalizing the DisplayT
Page 81 and 82: Chapter 9Advanced WinTrac Features6
Page 83 and 84: Chapter 9Advanced WinTrac FeaturesU
Page 85 and 86: Chapter 9Advanced WinTrac Features6
Page 87 and 88: Chapter 9Advanced WinTrac FeaturesR
Page 89: Chapter 9Advanced WinTrac FeaturesU
Page 93 and 94: Chapter 10Troubleshooting your WinT
Page 95 and 96: Chapter 10Troubleshooting your WinT
Page 97 and 98: Chapter 11License AgreementChapter
show all

WinTracâ¢ 5.X

Create successful ePaper yourself

Delete template?

Save as template?

WinTracâ¢ 5.X