WinTrac™ 5.X

Chapter 9Advanced WinTrac FeaturesSetting up DAS Logging ModesWhen main power is removed from the DAS data logger, the DAS is capable of running in two differentlogging modes in order to continue logging yet conserve the battery of your Thermo King unit. When mainpower is removed from the DAS, it enters into Countdown mode. The DAS continues to log as normal when inthis mode. You can set the duration of countdown mode from WinTrac in the logging modes window.Once countdown mode has expired, DAS enters conservative mode. In this mode, the DAS remains in sleepmode and only powers-up each logging interval. The DAS then performs a log and goes back into sleep mode.You can adjust the duration of conservative mode by setting the number of logs performed in conservativemode from the logging modes window.1. Select Setup logging modes... from the Tools menu. The DAS Operating Modes window appears.2. You can configure the number of hours for Countdown mode, and the number of logs for Conservativemode.3. Click on the Update Unit button when you want to send your changes to the DAS data logger.WinTrac will ask you to confirm your changes before sending them to the DAS.82