WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsVehicle IDThe Vehicle ID is a 7 character field, used to identify the TranScan unit. The Vehicle ID is normally set to theID Number of the Truck, for easy identification.Company NameCompany Name is a 14 character field, used to store the name of the Company operating the TranScan unit.Date and TimeWinTrac allows you to view the current Date and Time of the TranScan unit. It is important that the TranScanclock is set to the correct Date and Time since this will affect the validity of the data stored in the logger. Youcan change the Date and Time using WinTrac software, if it is incorrect.Sensor LabelsThe TranScan stores labels as 7 characters for each probe on the unit. These labels appear on TranScanprintouts. WinTrac also uses these labels when displaying sensor information for a particular TranScan datalogger.Logging IntervalThe TranScan logs the readings for each probe and switch each Logging Interval. The logging interval may beset to:1 min 20 mins5 mins 30 mins10 mins 45 mins15 mins 1 hrThe default logging interval is 15 mins.Software RevisionWinTrac displays the software revision of the TranScan unit currently connected to your PC.Serial NumberWinTrac displays the serial number of your TranScan. You should note this serial number as it uniquelyidentifies your TranScan unit.Note: More advanced parameters are available on the Advanced tab of the TranScan Propertieswindow.44