WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsMPA+, MPA SettingsMPA+ Settings WindowThe MPA+ Settings window gives you access to the operating parameters of the MPA+ controller. You canview/alter the Logger ID, Clock, Logging Interval, and many other parameters on the MPA+. In addition, youmay also send a Text Header or Start-of-Trip [SOT] Header to the MPA+ controller. A full list of parametersaccessible from the MPA+ Settings window is provided below. Note that the operation of WinTrac 5 softwarewith the MPA controller is quite similar to the MPA+ with the exception that some of the MPA+ parametersmay not be present on the MPA..ParameterContainer ID*Unit ID*Date and Time*Text HeaderStart-Of-Trip HeaderSensor ReadingsLogging IntervalLogging ModeSerial Number*Software RevisionAccessRead/WriteRead/WriteRead/WriteWriteWriteRead OnlyRead/WriteRead/WriteRead OnlyRead Only* = MPA+ only39