WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsSome DMS parameters are located on the Advanced DMS Settings window. This window is accessed byclicking on the More… button, located on the Advanced tab of the DMS Settings Window.ParameterLogger IDDMS Date and TimeText HeaderStart-Of-Trip HeaderSensor LabelsSensor AlarmEnable/DisableSensor Alarm ThresholdsLogging IntervalLogging Mode [2/6 Sensor]Display optionsPrint optionsDMS TimersSatellite Port ConfigurationHourmetersSoftware RevisionSensor ReadingsAccessRead/WriteRead/WriteWriteWriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead OnlyRead OnlyLogger IDThe Logger ID is a 10 character string, used to identify the DMS unit. The Logger ID is normally set to theRegistration Number of the Trailer, for easy identification.DMS Date and TimeWinTrac allows you to view the current Date and Time of the DMS data logger. It is important that the DMSclock is set to the correct Date and Time since this will affect the validity of the data stored in the logger. Youcan change the Date and Time using WinTrac software, if it is incorrect.Text HeaderYou can send a Text Header to your DMS logger using WinTrac software. A Text Header consists of a seriesof text fields containing useful information about a particular Trip. Once you send a header, WinTrac willremember your settings and will automatically fill in the fields for you the next time you choose to send a TextHeader to your DMS.22