WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsSwitch-State LabelsThe Accuracy data logger stores 4 character labels for the two possible switch states of Accuracy switchinputs. These labels are used on the Accuracy display, and also in WinTrac software when displaying switchinformation. These labels are Read-Only on Accuracy devices.Language SetupYou can choose to set up your Accuracy to use one of the following languages:EnglishFrenchGermanItalianSpanishNorwegianDutchSoftware RevisionWinTrac displays the software revision of the Accuracy unit currently connected to your PC.Serial NumberWinTrac displays the serial number of your Accuracy. You should note this serial number as it uniquelyidentifies your Accuracy unit.In Service DateWhen you communicate with an Accuracy data logger for the first time using WinTrac software, your Accuracydata logger is initialised, and the In Service Date is set on your Accuracy. This date indicates when theAccuracy went into service, and may be useful for warranty purposes.20