WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsSome Accutrac parameters are located on the Advanced Accutrac Settings window. This window is accessedby clicking on the More… button, located on the Advanced tab of the Accutrac Settings Window.ParameterLogger IDCompany NamePasswordDate and TimeSensor LabelsLogging IntervalLogging TypeDisplay setup [°C/°F]Printout TypePrintout FormatSwitch-State labelsLanguage SetupSoftware RevisionSerial numberIn Service DateAccessRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead OnlyRead/WriteRead OnlyRead OnlyRead OnlyLogger IDThe Logger ID is an 8 character field, used to identify the Accutrac unit. The Logger ID is normally set to the IDNumber of the Truck, for easy identification.Company NameCompany Name is a 10 character field, used to store the name of the Company operating the Accutrac unit.PasswordAccuracy data loggers may be protected with a password so that unauthorised users cannot get access to theAccutrac from WinTrac software. If password protection is enabled, you must know the password in order tocommunicate with the Accuracy data logger. The Password is a 10 character field. WinTrac remembers thePassword for each Accutrac logger, so you only need to verify the Password once.Date and TimeWinTrac allows you to view the current Date and Time of the Accutrac unit. It is important that the Accutracclock is set to the correct Date and Time since this will affect the validity of the data stored in the logger. Youcan change the Date and Time using WinTrac software, if it is incorrect.18