WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsSensor LabelsThe DRS stores labels as 3 characters for the 2 probes and 2 switches on the DRS unit. These labels appearon DRS printouts, and on the display of the DRS. WinTrac also use these labels when displaying sensorinformation for a particular DRS data logger.Logging IntervalThe DRS logs the readings for each probe and switch each Logging Interval. The logging interval may be setto:1 min 20 mins5 mins 30 mins10 mins 45 mins15 mins 1 hrThe default logging interval is 15 mins.Logging RangeThe DRS data logger normally logs a range of 60°C. You can select one of four logging ranges to suit yournormal range of operation:-45°C to +15°C-35°C to +25°C-30°C to +30°C-15°C to +45°CThe default logging range is -30°C to +30°CLogging TypeLogging Type determines the type of log performed by your DRS data logger at the end of each logginginterval. The four possible types are: Minimum, Mean, Maximum, and Instantaneous.• Minimum stores the minimum value measured over the logging interval.• Mean stores the average value measured over the logging interval.• Maximum stores the maximum value measured over the logging interval.• Instantaneous stores the current measured value at the end of the logging interval.Display Setup (°C/°F)You can choose the temperature units used when displaying probe readings on the DRS display. You canchoose between degrees Celsius or degrees Fahrenheit.15