WinTrac™ 5.X

Chapter 4Communicating with your Thermo King UnitsSome DRS parameters are located on the Advanced DRS Settings window. This window is accessed byclicking on the More button, located on the Advanced tab of the DRS Settings Window.ParameterLogger IDCompany NamePasswordDRS Date and TimeSensor LabelsLogging IntervalLogging RangeLogging TypeDisplay setup [°C/°F]Printout OptionsSwitch-State labelsSoftware RevisionSerial numberIn Service DateAccessRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead/WriteRead OnlyRead OnlyRead OnlyLogger IDThe Logger ID is an 8 character field, used to identify the DRS unit. The Logger ID is normally set to theRegistration Number of the Trailer, for easy identification.Company NameCompany Name is a 10 character field, used to store the name of the Company operating the DRS unit.PasswordDRS data loggers may be protected with a password so that unauthorised users cannot get access to the DRSfrom WinTrac software. If password protection is enabled, you must know the password in order tocommunicate with the DRS data logger. The Password is a 10 character field. WinTrac remembers thePassword for each DRS logger, so you only need to verify the Password once.DRS Date and TimeWinTrac allows you to view the current Date and Time of the DRS unit. It is important that the DRS clock is setto the correct Date and Time since this will affect the validity of the data stored in the logger. You can changethe Date and Time using WinTrac software, if it is incorrect.14