A9900618 (Issue 3) - Triumph Instructions.com

WarningThis accessory kit is designed for use on Triumphmotorcycles only and should not be fitted to any othermanufacturer’s motorcycle. Fitting this accessory kit to anyother manufacturer’s motorcycle will affect theperformance, stability and handling of the motorcycle. Thismay affect the rider’s ability to control the motorcycle andcould cause an accident.WarningWith LED indicators fitted, if one of the indicator lightsfails, the remaining indicator may not flash faster but willcontinue to flash at its normal speed.Riding a motorcycle with any of its lights not working isillegal and dangerous. Check that the lights and indicatorsare working and rectify as necessary, as described in theowner's handbook.WarningAlways have Triumph approved parts, accessories andconversions fitted by a trained technician of an authorisedTriumph dealer. The fitment of parts, accessories andconversions by a technician who is not of an authorisedTriumph dealer may affect the handling, stability or otheraspects of the motorcycle’s operation, which may result inloss of motorcycle control and an accident.WarningThroughout this operation, ensure that the motorcycle isstabilised and adequately supported to prevent risk ofinjury from the motorcycle falling.NoticeFor the US and Canadian markets only, this accessory kitdoes not comply with F/CMVSS 108.The fitting of this accessory kit is at the owner's risk. If youuse a motorcycle fitted with this kit on public roads, youmay be prosecuted.Note:• Ensure that a relevant Triumph Service Manual isavailable for reference during the fitting of thisaccessory kit.WarningA torque wrench of known accurate calibration must beused when fitting this accessory kit. Failure to tighten anyof the fasteners to the correct torque specification mayaffect motorcycle performance, handling and stability. Thismay result in loss of motorcycle control and an accident.2 of 6