R45, R46 Regulators â Miniature (Air / Water ... - Wainbee Limited
R45, R46 Regulators â Miniature (Air / Water ... - Wainbee Limited
R45, R46 Regulators â Miniature (Air / Water ... - Wainbee Limited
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Catalog 0700P-6<strong>Miniature</strong> <strong>R45</strong> / <strong>R46</strong> SeriesPrep-<strong>Air</strong> ®II, <strong>R45</strong> / <strong>R46</strong> Series1/4" & 3/8" - Basic 1/4" BodyA<strong>R45</strong>, <strong>R46</strong> <strong>Regulators</strong> – <strong>Miniature</strong> (<strong>Air</strong> / <strong>Water</strong> Service)Features• Lightweight Plastic Body• Constructed with a Combination of N.S.F.and F.D.A. Approved Materials• Unbalanced Poppet Standard• Non-rising, Push-to-lock Adjusting Knob• Compact, 3.43 inch (87.1mm) high by2.06 inch (52.3mm) wide• Lightweight• Diaphragm Operated1/4" NPTGauge Ports(2)A-+PUSH–LOCKBCEDPort Size<strong>Air</strong> ServiceRelievingNPT<strong>Water</strong> ServiceNon-RelievingRelieving, 0-125 Reduced Pressure, Without Gauge1/4" <strong>R45</strong>-02C <strong>R46</strong>-02CK3/8" <strong>R45</strong>-03C <strong>R46</strong>-03CKBold Items are Most Popular.For other models refer to ordering information below.NOTE: 1.250 Dia. (31.8mm) hole required for panel mounting.<strong>R45</strong>, <strong>R46</strong> RegulatorDimensionsA2.06(52)D0.53(14)Inches (mm)B2.06(52)E3.43(87)C2.90(74)Ordering Information<strong>R45</strong> — 02 CSeries<strong>R45</strong> Buna Elastomers(<strong>Air</strong>)<strong>R46</strong> EPDM Elastomers(<strong>Water</strong>)Port Size02 1/4 Inch03 3/8 InchPressure RangeA 0 to 25 PSIG(0 to 2 bar)B 0 to 60 PSIG(0 to 4 bar)C 0 to 125 PSIG(0 to 8 bar)ReliefBlank RelievingK Non-Relieving(For <strong>Water</strong> Service)P Panel Mount NutBOLD ITEMS ARE MOST POPULAR.A64Parker Hannifin CorporationPneumatic DivisionRichland, Michiganwww.parker.com/pneumatics
Catalog 0700P-6Technical Specifications – <strong>R45</strong> / <strong>R46</strong>Prep-<strong>Air</strong> ®II, <strong>R45</strong> / <strong>R46</strong> Series<strong>Air</strong> Line <strong>Regulators</strong>Technical InformationASecondary Pressure - kPa600500400300200100Secondary Pressure - PSIG10080604020<strong>Water</strong> Flow Characteristics<strong>R45</strong>, <strong>R46</strong>100 PSIG Primary Pressure<strong>Water</strong> Temp 70°Secondary Pressure - bar654321Secondary Pressure - PSIG10080604020<strong>Air</strong> Flow Characteristics<strong>R45</strong>, <strong>R46</strong>100 PSIG (6.9 bar)Primary Pressure0000.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0Flow - GPM000 5 10 15 20 25 30 35 40 45 50 55 60Flow - SCFM02.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0Flow - l/min2 0 2 4 6 8 10 12 14 16 18 20 22 24 26Flow - dm 3 /snCAUTION:REGULATOR PRESSURE ADJUSTMENT – The workingrange of knob adjustment is designed to permit outletpressures within their full range. Pressure adjustment beyondthis range is also possible because the knob is not a limitingdevice. This is a common characteristic of most industrialregulators, and limiting devices may be obtained only byspecial design.For best performance, regulated pressure should always beset by increasing the pressure up to the desired setting.! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.Do not exceed maximum primary pressure rating.<strong>R45</strong>, <strong>R46</strong> Regulator Kits and AccessoriesPanel Mount Nut – Plastic ................................................... R05X51Aluminum ............................................R05X51AMounting Bracket and Nut ............................................. SA161X57Service Kits – Relieving ...................................................... RK<strong>R45</strong>YNon-Relieving ............................................RK<strong>R45</strong>KYSprings – 0-25 PSIG Spring ..................................................SPR-460-60 PSIG Spring ..................................................SPR-470-125 PSIG Spring ................................................SPR-48SpecificationsGauge Ports (2) ................................................................... 1/4 Inch(Can be used for full fl ow)Pressure Rating – Maximum Inlet Pressure 150 PSIG ......(10.0 bar)Port Threads .................................................................. 1/4, 3/8 InchTemperature Rating ............................ 40°F to 125°F (4°C to 52°C)Weight .....................................................................0.38 lb. (0.17 kg)Materials of ConstructionAdjusting Screw ....................................................................... SteelBody ......................................................................................... AcetalBonnet and Seat ..................................................................... AcetalDiaphragm (<strong>R45</strong>)................................................................... Buna NDiaphragm (<strong>R46</strong>)..................................................................... EPDMSeals (<strong>R45</strong>) ............................................................................ Buna NSeals (<strong>R46</strong>) .............................................................................. EPDMSprings ...................................................................... Stainless SteelValve Poppet (<strong>R45</strong>)............................................................... Buna NValve Poppet (<strong>R46</strong>)................................................................. EPDMA65Parker Hannifin CorporationPneumatic DivisionRichland, Michiganwww.parker.com/pneumatics
Change language