Fronius IG TL

Fronius IG TLTransformerless PV inverterwithstandardsystem monitoring

Pluginthe future.Lockinyour yield.The consistent expansion ofasuccessful family: The Fronius IG TLincorporates all the advantages of atransformerless inverter conceptwith the high innovation and quality demands of Fronius. Perfectfor system sizes ranging from single-family homes uptoagriculturalor commercial operations. Unique inits class is the standard systemmonitoring which makes it the most future-proof transformerlessinverter providing maximum earnings security.

Lock inyour yield for the long-termAlways well-informedSystem monitoring with the Status Manager comesstandard in the Fronius IG TL inverter. The StatusManager immediately reports any problems thuslocking in system yields for the long-term.String malfunction detection. The inverter continuallycompares the string currents of connected strings witheach other. This enables the early detection ofproblems in the entire system (e.g. gnawing damage tocables from small animals, module failure, etc.). Thiscan help toprevent an incremental loss of earnings.Detailed status codes. Should any problems occur inthe system, comprehensive and precise service codesare displayed. This makes it easier toisolate the exactsource ofthe error and saves valuable time for faultdiagnostics and correction.The numerous information and analysis options of theFronius IG TL inverter are very simple to operate. Currentoperating data can be easily transferred to aPC via aUSB stick. Other DATCOM components can also beeasily connected via the integrated Solar Net interface.Night display. System information 24/7. The matrixdisplay shows the most important information regardlessof whether or not the inverter is in operation. This is madepossible via the AC side power supply. For example, thisenables you toaccess daily system data on the displayeven after sundown –including any status messages.Direct signaling contact. A warning signal (e.g.indicator light or buzzer) can be activated when thereare status changes via the 12 Vsignal output integratedinto the inverter. Malfunctions are reported immediately.The highest efficiency via the Module Manager.Whoever can always remain at the maximum powerpoint (MPP), can get the most out of each ray of light.This is the job of the Fronius Module Manager with itsaccurate MPP tracking.Integrated Solar Net interface. Other componentsfor system monitoring (e.g. Fronius Datalogger) can beconnected directly tothe inverter through the standardSolar Net interface. This enables you toeasily integratehigh-end system monitoring that is 100% compatiblewith all other Fronius IG inverters as well as thecomprehensive Fronius DATCOM world.Easy data exchange via USB. A commercially-availableUSB stick that can be inserted into the inverter collectsdata during operation. System information can thenbemoved to aPC at any time and then analyzed andarchived using Fronius Solar.access software. Timeconsumingcabling is no longer required. Simply pull outthe DATCOM slot, remove the USB stick and load thedata to your PC.

Future-proof with USBProven qualityFuture challenges have already been designed into theFronius IG TL during its development. Its easy USBupdate option ensures that it will always have access tothe latest program functions. And the simple DATCOMslot makes sure that it is open to further productupgrades.Service-friendly installation system. The connectionarea and power module are installed separately fromeach other. Time-consuming cabling is no longerrequired. When service isneeded, the connectorremains on the wall and the DATCOM slot remainsonsite –all settings and configurations remainuntouched. The standard string monitoring systemchecks the current of up to 6strings.DATCOM slot. The DATCOM slot can be used forconnecting the USB stick, optional DATCOMcomponents as well as the direct signaling contact. Itopens like adrawer providing easy access. Additionalcomponents can be connected later on as required.Completely heat and dust-free ventilationconcept. The well-thought-out ventilation conceptprecludes overheating orcontamination. The devicebody is hermetically sealed. Only the cooling fins forthe electronics remain on the outside. The electronicsare air-cooled. The temperature-controlled fancirculates outside air through the cooling fins asrequired. This ensures that the inside ofthe deviceremains significantly cooler and that there isabsolutelyno exchange between inside and outside air.Update via USB. The USB stick can be used toupload program updates tothe inverter. When asoftware update isavailable, it can be downloadedfrom the Fronius homepage to the USB stick. Thensimply insert the USB stick into the inverter andoperating functions will be updated automatically.This means that the Fronius IG TL will always have thelatest software technology.On-site PCB replacement. If service isrequired, allcertified Fronius Service Partners can replace the PCboard onsite. This means the quickest reaction timeand minimal downtime.

Fronius IG TL OverviewNaturally, all Fronius IG TL devices have the mark and meet all required guidelines and standards. For moreinformation about certificates as well as details about equipment analysis and control using the DATCOM system, pleasego to www.fronius.com.INPUT DATAFronius IG TL 3.0 Fronius IG TL 3.6 Fronius IG TL 4.0 Fronius IG TL 4.6 Fronius IG TL 5.0DC maximum output 3130 W 3840 W 4190 W 4820 W 5250 WMax. input current (I dc max ) 8.8 A 10.8 A 11.8 A 13.5 A 14.7 AMax. input voltage (U dc max ) 850 V 850 V 850 V 850 V 850 VMPP voltage range (U mpp min -U mpp max ) 350 -700 V 350 -700 V 350 -700 V 350 -700 V 350 -700 VOUTPUT DATAAC nominal output (P ac,r) 3000 W 3680 W 4000 W 4600 W 4600 W* /5000 WMax. output power 3000 W 3680 W 4000 W 4600 W 5000 WMax. output current (I ac max ) 13.0 A 16.0 A 17.4 A 20.0 A 21.7 AMaximum efficiency 97.7% 97.7% 97.7% 97,7 % 97.7%European efficiency (η EU ) 97.1% 97.2% 97.3% 97,3 % 97.3%MPP adjustment efficiency >99.9 %Mains connectionFrequency (f r)GENERAL DATADimensions (height xwidth xdepth)WeightFRONIUS AUSTRALIA PTY LTD.90-92 Lambeck DriveTullamarine VIC 3043E-Mail: pv-sales-australia@fronius.com597 x413 x195 mm19.1 kgDegree of protection IP 55InverterCoolingInstallationAmbient temperature rangePermitted humidityPROTECTIVE EQUIPMENTDC insulation measurementOverload behaviourDC disconnectorINTERFACESUSB A socketSignalling output (NO contact)2x RJ45 sockets (RS485)1~NPE 230 V50 Hz/60 HzDistortion factor