13.07.2015 Views

Data Sheet - M-System

Data Sheet - M-System

Data Sheet - M-System

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MODEL: 73VR3100index.Jump: Scroll the view to an alarm event to show the relevantdata on Retrieve View.• Comment History View: Shows data stored in thecomment history file.Number of displayed alarm events: 16Number of display views: 1<strong>Data</strong> search: Scrolling the view or specifying a specific timeindex.Jump: Scroll the view to a comment to show the relevantdata on Retrieve View.■ COMMUNICATIONS: Monitoring data and setup of the73VR3100 is possible on the PC connected via Ethernet.Real time communication: Transmits specific data to a hostPC installed with the PC Recorder Software (model:MSR128).FTP communication: Transmits data stored in the CF Cardusing the FTP protocol to a host PC by the 73VR <strong>Data</strong> Viewer(model: 73VRWV) installed in it. <strong>Data</strong> can be transmittedeven during recording.Download, Upload: A software configuration created on the73VR3100 Configuration Builder (model: 73VR31BLD) canbe downloaded to the 73VR3100. The configuration set upon the 73VR3100 can be uploaded and displayed on the73VR31BLD.• Modbus ProtocolProtocol: Modbus/TCPPort No.: 502 (fixed)IP address: Set on the recorderSubnet mask: Set on the recorderDefault gateway: Set on the recorderMax. number of 73VR3100 connected simultaneously: 2Supported Function CodesCODE NAMEFUNCTION01 Read Coil Status Reads DO02 Read Input Status Reads DI04 Read Input Register Reads Input Register05 Force Single Coil Sets DO11 Fetch Communication Reads Status Word andEvent Counter Event Counter fromComm. Event Counter15 Force Multiple Coils Sets DO (multiple)Exception ResponseCODE NAMEFUNCTION01 Illegal Function Function Not supported02 Illegal <strong>Data</strong> Address Specified address doesnot existSupported Function CodesADDR.NAMECoil (0X) 1...256 Alarm output, discrete outputInput Status 1...256 Trigger input, discrete input(1X) 257...319 Function data (discrete)Input Register 1...64 Measured data (analog, 2 bytes)(3X) 257... Measured data (analog, 4 bytes)385... Function data (analog, 4 bytes)■ REMOTE MODESetting and operation from PLC is available in combinationwith interface I/O modules.Please refer to the 73VR3100 REMOTE MODE ReferenceManual for detailed information.■ OTHER FUNCTIONS• Operation LockoutWith a password setting, unauthorized operations on theTrend View, Bargraph View and Overview can be locked out.• <strong>Data</strong> File Used Volume InformationA bargraph with % indication is provided on the screen toshow how much percent of the data file memory has beenused up.0 – 49 % used: Green bargraph50 – 79 % used: Amber bargraph80 – 100 % used: Red bargraph• Hot Swapping of the CF CardThe CF Card is hot swappable: removable during datarecording. However, there may be a slight disturbance instoring rate when the card is inserted.• Screen SaverThe backlight is automatically turned off if the screen isuntouched for a certain time period.• Bus Error AlertAn alarm contact is output at a specified channel of the R3-DC16 in case of internal bus error. (Only 1 channel can bespecified.)http://www.m-system.co.jp/ 73VR3100 SPECIFICATIONS ES-7397 Rev.18 Page 12/14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!