Equipment - Hanes Supply, Inc

More documents

Recommendations

Info

EquipmentLarge Portable CompressorsHeavy Duty Portables• 11 HP engine includes electric start with batterybox and cables (battery not included)• Electric models 230 volt with thermal overload• ASME-NB standard on 30-gallon models• ASME code not applicable on HDP models(6" diameter)• Extra large pneumatic tires on 30P models• Lifting bail available• Diesel option availablePortable Trailer• 11 & 18 HP engines include electric start withbattery box and cables (battery not included)• 8 HP recoil start – electric start optional• Electric models 230 volt with thermal overload• 30-gallon ASME tank standard. ASME-NBOptionalSkid-Mount• 11 & 18 HP engines include electric start (batterybox & battery not included) consult salesdept. for optional add on• 8 HP recoil start – electric start optional• Diesel option available• 30-gallon ASME tank standard. ASME-NBOptionalBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229EmgloHanes Supply of SC, Inc.CCISCO: 843.238.1338FAX: 843.238.8337CFM DISP CFM Delivered Air Approx. Dim. (in)Tank 125 40 100 125/175 ShipHP Model Drive Gal. PSI PSI PSI PSI PSI Wt. (lbs) L W HELECTRIC Heavy-Duty Portables5 J5A-HDP Electric 8 125 28.7 21.5 19.4 19.0/- 427 66 24 325 W5B-HDP Electric 8 175 21.6 18.3 18.1 -/17.9 415 66 24 325 W5B-30P Electric 30 175 21.6 18.3 18.1 -/17.9 645 59 28 40GAS Heavy-Duty Portables11 J11GA-HDP Gas/Briggs 8 125 31.8 23.5 21.3 20.9/- 432 66 24 3211 J11GA-30P Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 625 59 28 4011 J11KGA-HDP Gas/Kohler 8 125 31.8 23.5 21.3 20.9/- 453 66 24 3211 J11KGA-30P Gas/Kohler 30 125 31.8 23.5 21.3 20.9/- 680 59 28 4011 J11HGA-HDP Gas/Honda 8 125 31.8 23.5 21.3 20.9/- 420 66 24 3211 J11HGA-30P Gas/Honda 30 125 31.8 23.5 21.3 20.9/- 620 59 28 4011 W11GB-HDP Gas/Briggs 8 175 21.1 18.0 17.8 -/17.6 432 66 24 3211 W11GB-30P Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 625 59 28 4011 W11KGB-HDP Gas/Kohler 8 175 21.1 18.0 17.8 -/17.6 453 66 24 3211 W11KGB-30P Gas/Kohler 30 175 21.1 18.0 17.8 -/17.6 680 59 28 4011 W11HGB-HDP Gas/Honda 8 175 21.1 18.0 17.8 -/17.6 420 66 24 3211 W11HGB-30P Gas/Honda 30 175 21.1 18.0 17.8 -/17.6 620 59 28 40ELECTRIC Portables Trailer5 GC5A-PT Electric 30 125 27.8 20.8 18.3 17.8/- 694 71 58 375 J5A-PT Electric 30 125 28.7 21.5 19.4 19.0/- 714 71 58 385 W5B-PT Electric 30 175 21.6 18.3 18.1 -/17.9 714 71 58 38GAS Portable Trailer8 GC8GA-PT Gas/Briggs 30 125 24.6 18.6 16.4 16.0/- 560 71 58 3711 J11GA-PT Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 700 71 58 3811 W11GB-PT Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 700 71 58 3818 U18VGB-PT Gas/Briggs 30 175 43.0 35.4 35.1 -/34.7 904 78 68 3918 U18KGB-PT Gas/Kohler 30 175 43.0 35.4 35.1 -/34.7 920 78 68 3918 U18HGB-PT Gas/Honda 30 175 43.0 35.4 35.1 -/34.7 888 78 68 39GAS Skid Mount8 GC8GA-SM Gas/Briggs 30 125 24.6 18.6 16.4 16.0/- 455 38 36 238 GC8KGA-SM Gas/Kohler 30 125 24.6 18.6 16.4 16.0/- 485 38 36 238 GC8HGA-SM Gas/Honda 30 125 24.6 18.6 16.4 16.0/- 463 38 36 2311 J11GA-SM Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 490 38 36 2511 J11KGA-SM Gas/Kohler 30 125 31.8 23.5 21.3 20.9/- 520 38 36 2511 J11HGA-SM Gas/Honda 30 125 31.8 23.5 21.3 20.9/- 488 38 36 2511 W11GB-SM Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 490 38 36 2511 W11KGB-SM Gas/Kohler 30 175 21.1 18.0 17.8 -/17.6 520 38 36 2511 W11HGB-SM Gas/Honda 30 175 21.1 18.0 17.8 -/17.6 488 38 36 2518 U18VGB-SM Gas/Briggs 30 175 43.0 35.4 35.1 -/34.7 694 41 48 2718 U18KGB-SM Gas/Kohler 30 175 43.0 35.4 35.1 -/34.7 710 41 48 2718 U18HGB-SM Gas/Honda 30 175 43.0 35.4 35.1 -/34.7 678 41 48 2730EquipmentHand-Carry CompressorsIf your job site makes the use of a wheeled orstationary compressor impractical, Emglo’shand-carry compressors are the solution.Emglo Master Series and Air-Mate direct drivehand-carry compressors are available in eitherelectric or gas-drive models, in ratings from 1 to2-1/2 HP electric and 4 HP gas. Tank configurationsinclude the popular, original twin-stackedtank or the lighter-weight single-tank version.They feature the dependably, reliability, andinnovation you expect from The Authentic Blue.Emglo Master Series hand-carry compressorscombine the superior performance standards ofthe Air-Mate with an innovative air control panel.They feature larger gauges and universal quickcouplers. Master Series hand-carry models areoil-lubricated, and Air-Mate models are availablelubricated or oil-free.Electric: From interior trim and finish to heavierconstruction applications, Air-Mate or MasterSeries Hand-Carry will do the job. Electric modelsdeliver 2.6 to 5.6 cfm, thermal overload protectionwith manual resets and special unloadingvalves for motor starting. Several tank configurationsplus oil-free versions are available.All models can be purchased in the standardAIr-Mate version, with many also available asMaster Series models.– continues –30-14Gas: For a hand-carry compressor when electricpower is nonexistent, rely on Emglo’s gasdriveAir-Mates and Master Series models.Emglo’s innovative gasoline-powered compressorsuse a uniquely balanced direct couplingand a special anti-vibration mechanism toimprove performance. All models include auto-AM780-HC4V This is it–theindustry standard for stacked airtanks. This 2 HP model delivers4.1 cfm at 100 psi! It may be lightweight,but does it pack a punchWWW.HANESSUPPLY.COMAM700-HC4V It’s innovative andaffordably priced, too. This modelmay be the most exceptionalvalue on the market. Even thoughit's 2 HP rated, it draws less than13.5 amps!matic throttle idle control to reduce wear andsave fuel when the compressor is not underload. Gas-powered hand-carry units by Emglooutperform and outlast competing units. Allmodels produce 4.4 cfm delivered air at 100 PSIand are available in Air-Mate and Master Seriesversions.M790-HC4V Here’s traditionalAir-Mate quality with enhancedfeatures for improved ease of use.It includes an integrated air controlpanel with regulator, largegauges, and two universal quickcouplers
Hand-Carry Compressors (continued)Hand-Carry Portables• Automatic start stop control with easy starthead unloading standard on all electric models• Automatic throttle idle control standard on allgas models• Air line regulators and gauge standard on allmodels – Master Series features an integratedair control panel which includes two universalquick couplersNotes* 20-AMp breaker required+ Lower amperage draw other than 2 HP units^ Features a cast-iron cylinderBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Emglo/Heck Industries, Inc.Hanes Supply of SC, Inc.CCISCO: 843.238.1338FAX: 843.238.8337EquipmentCFM DISP CFM Delivered Air Approx. Dim. (in)Tank 125 40 100 125/175 ShipHP Model Drive Gal. PSI PSI PSI PSI PSI Wt. (lbs) L W HMASTER SERIES ELECTRIC Start-Stop Control – Set 110 to 125 PSI1 M400-HC4V^ Electric 4 125 3.9 3.1 2.6 2.4 57 18 15 162 M790-HV4V^ Electric 4 125 7.7 5.1 4.1 3.6 62 18 15 162.5 M990-HC4V^ Electric 4 125 10.1 7.6 5.6 5.2 69 18 21 17MASTER SERIES GAS Constant-Run Control – Set 110 to 125 PSI4 M840-4HG-HC4V Honda 4 125 8.3 6.1 4.7 4.4 70 18 21 17AIR-MATE ELECTRIC Start-Stop Control – Set 100 to 125 PSI1 AM390-HC2^ Electric 1.5 125 3.9 3.1 2.6 2.4 45 18 13 141 AM390-HC4V^ Electric 4 125 3.9 3.1 2.6 2.4 56 18 15 162 AM700-HC4V+ Electric 4 125 6.9 4.5 3.2 3.1 49 18 15 162 AM780-HC2^ Electric 4 125 7.7 5.1 4.1 3.6 60 18 15 162 AM780-HC4V^ Electric 4 125 7.7 5.1 4.1 3.6 60 18 15 162.5 AM990-HC4V Electric 4 125 10.1 7.6 5.6 5.2 69 18 21 17AIR-MATE GAS Constant-Run Control – Set 110 to 125 PSI4 AM840-4HG-HC4V Honda 4 125 8.3 6.1 4.7 4.4 67 18 21 17AIR-MATE OIL-LESS ELECTRIC Start-Stop Control – Set 95 to 120 PSI2 AMDOL780-HC2 Electric 1.5 120 7.8 5.0 3.7 3.2 38 16 15 152 AMDOL780-HC4V Electric 4 120 7.8 5.0 3.7 3.2 52 18 16 16Heck Industries, Inc.BEVEL-MILL ®Model 4000• Double Insulated• Adjustable handle positions forcomfortable operation• Trigger operation with lock• Specially designed gear drive motors• Variable speed control (optional)Model 7000A more effective method of beveling.• Eliminates slow grinding• No fumes - heat - smoke• No vibrationUsing standardV-Block roller guides,rounds and pipecan be worked 6"(2.7mm) or larger.Model 8000• Ideal for weld preparation• Works plate and structural steel as thinas 3/16" for clean burr-free edges• Variable angle 15° - 45°• Adjustable depth of cut• Works most materials machinable withcarbide such as mild steel, aluminumand stainless steel• Self supporting on the work piece• Can be inverted to work the lower edgeof plates• Specifically designed heavy duty motor• Using optional cutter head, radius edges can be made easily• V-block design assures consistent edge qualityBB27 Bench BevelerPrecision Finish Chamfers• Chamfer or deburr any material fromplastic to hardened steel• Ideal for finish chamfers or machinedparts• One pass debuurring or chamfering• Easily adjustable depth of cutHeavy-duty construction featuring:• Cast frame• Hardened and ground back plate• Ground table• Works parts as thin as 3/16"VA-400• Deburr - Chamfer edges easily• Adjustable angle 15 0 - 45 0• Uses standard carbide inserts• Adjustable depth of cut• Use on any steel or aluminum• Simple to operate• No set-up required• Corner rounding with radius insertsMin.Workpiece Bevel V-blockThickness Min. Max. Angle Length No. of Wt.Model (in) Bevel Bevel (degrees) (in) Insets Motor (lbs)4000 1/8 0 3/4 15-45 8-3/4 10 2hp 110V 2250/60 Hz7000 1/8 0 3/8 15-45 8 5 1/2hp 110V 268000 1/8 0 7/8 15-45 8 10 1hp 110V 369000 1/8 0 1-1/4 15-45 8-3/4 10 1-1/2hp 110V 50BB27 3/16 0 3/16 fixed 45 12 flap disk 1/2hp 110V 65VA-400 1/16 0 3/16 15/45 19-1/2 6 1hp 110V 59Patent #s 5,522,684 and 5,423,642, others pendingModel 9000• World’s most powerful plate beveler• Faster feed rates• Comfortable cushioned handles• Uses 5/8" square carbide inserts30WWW.HANESSUPPLY.COM30-15Equipment
Page 1 and 2: Buffalo - Headquarters: 716.826.263
Page 13 and 14: Hydraulic Hand Held Saw (continued)
Page 15: Wheeled Portable CompressorsThese w
Page 19 and 20: Model HCP 420UT No. 01609• Honda
Page 21 and 22: SLX2Self-Leveling/2-Beam (Plumb, Le
Page 27 and 28: Series 8 Mark IIOne of the most pop
Page 29 and 30: Heavy Duty NGD SeriesThe NAC Heavy
Page 31 and 32: Test Bolt AssembliesChoose test bol
Page 33 and 34: Concrete Mixers (continued)Buffalo

Equipment - Hanes Supply, Inc

Create successful ePaper yourself

Delete template?

Save as template?