Equipment - Hanes Supply, Inc

Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229CC1300 Series :Compact, Portable & Rugged• Screw feed or patented ratchetraise & lower mechanism• Upcut models available• Left or right hand sawing• Self aligning blade shaft bearings• Available w/choice of 14" or 18" bladeguard. 6-5/8" cutting depth w/18" guard• Handle adjusts to saw operator's height* Many gasoline & electric power sourcesto choose from* Handle folds down for easy storage &transportCC1300 SeriesCC1800 Series :Large Saw Features in a Portable Saw• Screw feed raise & lower mechanism• Available w/push or hydrostatictransmission choices.• Variety of power options ingasoline, electric or hydraulicup to 20 HP• Left or right hand sawing• Self aligning blade shaft bearings• Available with choice of 14" or 20" bladeguard. 7-5/8" cutting depth w/20" guard• Available with a 10 HP electric motor• Handle adjusts to saw operator's height.* Blade drive is via 4 belts on 16 HP models& up. 14 HP models & below have 3 belts.CC1800 SeriesCC2500 Series :Delivers the Power of a Large Saw with thecompactness & economy of a Small One!• Economical screw feed raise & lower mechanism• Variety of engine options up to 25 HP• Rigid high strength box frame• Positive gear drive to rear axle viaEaton hydrostatic transmission• Large 5-gallon fuel capacity for longersawing between refills• Choice of 14", 20" or 26" slip-on bladeguards• Maximum cutting depth 10-3/8" witha 26" guardCC3500 Series:35 HP Service SawCC2500 Series• Utilizes many of the same heavy-dutycomponents we use on our bigger saws• Features Wisconsin 35 HP gasoline engine• Available w/a 20 HP or 30 HPelectric motor.• Maximum cutting depth 11-3/4" with a30" guard• Choice of 14" through 30" blade guards• Fits through a 30" door!* CORE-CUT ® large saws featureconvenient one hand saw controlCC3700 Series:CC3500 SeriesMulti-Application SawThe most Compact 65 HP Saw on the Market - Fits through a 30" Door!• One hand sawing control.• Features 37 HP or powerful 65 HP Wisconsin gasolineengines (also available w/ 28 HP Deutz Dieselengine)• Choice of 14" through 36" blade guards.Maximum cutting depth 14-3/4" with a36" guard• Available w/a 25 HP or 40 HP electricmotor.• Has a frame designed for the higher torque ofa large horsepower engine but more compactthan the CC6500* CORE CUT ® large saws have the best bearings,blade flanges and blade shafts in the business.CC3700 SeriesDiamond ProductsWWW.HANESSUPPLY.COMHanes Supply of SC, Inc.CCISCO: 843.238.1338FAX: 843.238.8337EquipmentCC6500 Series:• One hand sawing control• Features Wisconsin 65 HP gasoline engine• Choice of 14" through 48" blade guards• Available with a 30 or 40 HP electricmotor• Maximum cutting depth 14-3/4"w/36" guard (19-3/4" w/optional48" conversion kit)• Fits through a 36" door* CORE CUT ® frames are the best in thebusiness, which improves your bladecutting speed and life.CC6500 SeriesCC7100 Series:Turbo Charged Diesel Production Concrete Saw• Longer life lower maintenance engine than 65 HPgasoline engine• Features Deutz 72 HP turbo charged engine.• 16-3/4" cutting depth w/42" guard• Extra heavy-duty reinforced single pieceframe• Choice of 14" through 42" bladeguards• Better fuel economy and much highersawing rates than a normal 65 HPgasoline engine.* Comes standard with CORE CUT’s ®Shaft Tachometer.CC7200 Series :CC7100 SeriesTurbo Charged Diesel Deep-Cut Saw• Features Deutz 72 HP turbo charged engine• Extra heavy-duty reinforced single pieceframe.• Available with a 40 HP or 50 HP electricmotor.• 22-3/4" cutting depth with 54" guard• Choice of 26" through 54" bladeguards• Longer life lower maintenanceengine than 65 HP gasolineengine.* Comes standard with CORECUT’s ® Shaft TachometerCC7200 SeriesCC8000 Series Rider Concrete Saw:Revolutionary New Concept That Delivers Maximum Flexibility• Hydraulic-driven blade shaft delivers an infinitely variable RPM with nohorsepower loss for 14" to 54" blade diameters.• Accommodates 14" through 54" blade.• Arm-mounted blade raises and lowers easily (while engine and operatorremain level)• Arm can be rotated for blade to enter cut at up to a 20° angle• 22-3/4" cutting depth with 54"guard• Less operator fatigue with lowmaintenance and easyserviceability.• Converts from a downcut to anupcut saw in less than aminute.• Heat exchanger for hydraulic oilutilizes air for cooling• 72 HP Deutz StandardCC8000 Series30-930Equipment