Equipment - Hanes Supply, Inc
Equipment - Hanes Supply, Inc
Equipment - Hanes Supply, Inc
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229SECTI0N 30<strong>Equipment</strong><strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Section IndexAIR TIMER CONTROL ............................30-29ARCWelder .............................................30-21–22ASPHALTRoller...............................................30-32–33BANDSaw, Stationary .....................................30-25BELOW THE HOOKDump Buckets.........................................30-1BEVELERBench ....................................................30-15Portable .................................................30-15Table................................................30-15–16BINSBulk Material ...........................................30-1Hopper ....................................................30-1BLOCK SAW ...........................................30-10BLOWERAir .........................................................30-34Ventilating..............................................30-18BOLTTension Calibrator .................................30-29BRUSHPressure Washer...................................30-24BUCKETBelow The Hook Dump ...........................30-1Crane Dump............................................30-1Multi-Dump..............................................30-1BULKMaterial Hopper.......................................30-1CALIBRATORBolt Tension...........................................30-29Torque Wrench ......................................30-29CEILINGFans ......................................................30-35CENTRIFUGALPumps..................................30-16–17, 30-26CHAINSaw, Diamond .......................................30-11COMPACTORPlate ................................................30-31–32COMPRESSORHand-Carry......................................30-14–15Stationary ........................................30-11–12Wheels ............................................30-13–14CONCRETECutting Saws .....................................30-8–11Floor Grinder.........................................30-10Floor Saws ..............................................30-9Mixers..............................................30-30–31Screeds .................................................30-33Vibrators................................................30-33COREDrilling Machine...................................30-7–8CRANEDump Buckets.........................................30-1CUTTERPlasma ..................................................30-22DEBURRINGTable......................................................30-15Tool........................................................30-16DETERGENTInjector ..................................................30-24DIAMONDChainsaw...............................................30-11DIAPHRAGMPump..........................................30-17, 30-26DOCKLights.....................................................30-36DRILLINGCore ....................................................30-7–8EFFLUENT PUMPS ................................30-21FANSBench ....................................................30-34Blower ...................................................30-34Ceiling ...................................................30-35Ceiling Mounted ..............................30-34–35Desk ......................................................30-34Floor ......................................................30-34Industrial..........................................30-34–35Oscillating..............................................30-34Pedestal ................................................30-34Wall Mounted ........................................30-34Work Station..........................................30-34FLOORGrinder ..................................................30-10FLUORESCENTLamps ...................................................30-36GENERATORSGas Powered ............30-16, 30-26–27, 30-40Welders ...........................................30-21–22GLASSESLaser Reading.......................................30-19GRINDERFloor ......................................................30-10HEATERSCalculating Size ....................................30-37Electric ..................................................30-35Kerosene ...............................................30-40Natural Gas .....................................30-37–39Propane...........................................30-37–39HOPPERSBins .........................................................30-1Lift Truck .................................................30-1Self Dumping...........................................30-1Tow-n-Dump ............................................30-1HOSEPressure Washer...................................30-24HYDRAULICConcrete Saw..................................30-10–11Load Reliever ........................................30-29Shearing Machine .................................30-27INCANDESCENT LAMPS.......................30-36INFRARED HEATERS.......................30-35–39INJECTORDetergent ..............................................30-24Sand......................................................30-24IRONWORKER MACHINES..............30-29–30WWW.HANESSUPPLY.COMJUMPING JACKS....................................30-31KEROSENE HEATERS ...........................30-40LAMPSDock ......................................................30-36Fluorescent ...........................................30-36<strong>Inc</strong>andescent.........................................30-36Infrared Heat..............................30-35, 30-39Magnifier ...............................................30-36Sodium ..................................................30-36Wall Mounted ........................................30-36Work Station..........................................30-36LASERAccessories...........................................30-19Construction Site Kits............................30-20Layout Tool ............................................30-19Levels.....................................30-1, 30-18–20Pocket..............................................30-18–19Reading Glasses...................................30-19Rotating........................................30-1, 30-20Targets...................................................30-19LEVELAutomatic ............................................30-1–2Belt Pouch .............................................30-19Ceiling Mount ........................................30-19Digital Theodolite.....................................30-2Dry Wall Stand ......................................30-19Hand........................................................30-7Key Point ...............................................30-19Lasers ....................................30-1, 30-18–20Line Transfer............................................30-3Magnetic Mount.....................................30-19Optical........................................30-1–3, 30-7Quick Clamp..........................................30-19Rod......................................................30-5–6Targets .........................................30-6, 30-19Transits ................................................30-1–3Tripods.................................................30-4–5LIFT TRUCKDumping Buckets ....................................30-1Hoppers...................................................30-1LIGHTSDock ......................................................30-36Fluorescent ...........................................30-36<strong>Inc</strong>andescent.........................................30-36Magnifier ...............................................30-36Sodium ..................................................30-36Wall Mounted ........................................30-36Work Station..........................................30-36LOCATORSurveyors Metal Detector........................30-6MAGNIFIERLamp .....................................................30-36MASONRYSaw .......................................................30-10METALCutting Saw...........................................30-30Detector, Surveyor ..............................30-6–7Punching Saw .......................................30-29Working Machines...........................30-29–30MIGWelders .................................................30-22– continues –30-A30<strong>Equipment</strong>
SECTION INDEXBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229SECTI0N 30<strong>Equipment</strong><strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337MIXERSConcrete..........................................30-30–31Mortar....................................................30-30MORTARMixer......................................................30-30NATURAL GAS HEATERSConvection ............................................30-38Forced Air........................................30-37–38Radiant..................................................30-39NOZZLESRotating, Pressure Washer ...................30-24OPTICALInstruments ........................30-1–7, 30-18–20PAVERSSaw .......................................................30-10PEDESTALFans ......................................................30-34PLASMA CUTTER ..................................30-22PLATE COMPACTOR........................30-31–32PNEUMATIC SAWConcrete Cutting Saw ...........................30-10PRESSURE WASHERBrush.....................................................30-24Coldwater ..............................................30-23Hose......................................................30-24Hot water...............................................30-24Injector, Detergent.................................30-24Injector, Sand ........................................30-24Nozzles, Rotating ..................................30-24Wand .....................................................30-24PROPANE HEATERSConvection ............................................30-38Forced Air........................................30-37–38Infrared..................................................30-39Radiant..................................................30-39PUMPSCentrifugal............................30-16–17, 30-26Diaphragm .................................30-17, 30-26Effluent ..................................................30-21Septic Tank............................................30-21Submersible....................30-18, 30-21, 30-25Sump.....................................................30-21Transfer Pump .......................................30-20Trash Pump................................30-17, 30-25Utility .....................................................30-20RADIANTHeaters..................................................30-39RAMMER .................................................30-31RODS, SURVEYORSAccessories.............................................30-6Level........................................................30-6Leveling ...............................................30-5–6Target ......................................................30-6ROLLERSAsphalt ............................................30-32–33Trench....................................................30-32Walk-Behind ..........................................30-32SANDInjector ..................................................30-24SAWSBand, Stationary ...................................30-25Block......................................................30-10Chain, Diamond ....................................30-11Concrete Cutting ...............................30-8–11Floor ....................................................30-8–9Hand Held .............................................30-10Hydraulic Concrete Cutter...............30-10–11Masonry/Paver ......................................30-10Metal Cutting .........................................30-30Pneumatic “Quickie” ..............................30-10Walk Behind ........................................30-8–9SCREED, CONCRETE ............................30-33SEPTIC TANK PUMP ..............................30-21SHEARSHydraulic, Stationary .............................30-27SODIUM LAMP .......................................30-36STOMPERS .............................................30-31SUBMERSIBLEPump ..............................30-18, 30-21, 30-25SUMP PUMP ...........................................30-21SURVEYORSLocator, Magnetic................................30-6–7Optical Instruments............30-1–6, 30-18–20Rods....................................................30-5–6Targets .........................................30-6, 30-19TARGETSLasers ...................................................30-19Level........................................................30-6Rods........................................................30-6TENSIONTesters, Bolt ....................................30-28–29TESTERSBolt Tension...........................................30-29Torque ...................................................30-29Torque-Tension................................30-28–29THEODOLITELevels ......................................................30-2TIMERAir Control .............................................30-29TORQUE WRENCHCalibrator...............................................30-29TORQUE–TENSIONAccessories...........................................30-29Testers.............................................30-28–29TRANSFERPump.....................................................30-20TRANSITS .............................................30-1–3TRASHPump..........................................30-17, 30-25TRENCH ROLLER ..................................30-32TRIPODSAccessories.............................................30-5Surveyors ............................................30-4–5TROWELPowered ................................................30-33UTILITYPump.....................................................30-20VENTILATINGBlowers..................................................30-18VIBRATORSConcrete................................................30-33WANDPressure Washer...................................30-24WASHER, PRESSUREBrush.....................................................30-24Coldwater ..............................................30-23Hose......................................................30-24Hot water...............................................30-24Injector, Detergent.................................30-24Injector, Sand ........................................30-24Nozzles, Rotating ..................................30-24Wand .....................................................30-24WELDERSArc...................................................30-21–22Gas Powered...................................30-21–22Generators ......................................30-21–22Mig ........................................................30-22WORK STATIONFans ......................................................30-34Lamps ...................................................30-36WRENCHCalibrator, Torque ..................................30-2930<strong>Equipment</strong>30-BWWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229APEXBULK HANDLERSSelf-Dumping Lift Truck HoppersHeavy and Light DutyApex hoppers provide an efficient, one person operation for handling alltypes of bulk materials. Designed for endurance, Apex utilizes structuralangles, channels and a one piece rocker system to provide a strongermore durable hopper. Available in 11 Standard Heavy Duty models, 1/4thru 5 cu. yd. capacities and 5 Light Duty models, 1/2 thru 3 cu. yd. capacities.Options include casters, lids, special paint and more.Approx. Overall Dim. (in) Approx.Cap. Thkns. Wt.(cu.yd) (in) Height Width Length (lbs)Heavy Duty1/4 1/8 24 33-1/2 46-1/2 3001/2 3/16 31-1/2 33-1/2 54 4703/4 3/16 35 39-1/2 60-1/4 6201 3/16 37-3/4 39-1/2 64-3/4 6601-1/2 3/16 46-1/2 39-1/2 75-3/4 8202 3/16 46-1/4 51-1/2 75-3/4 8602-1/2 3/16 47-1/4 63-1/2 75-3/4 11703 3/16 47-1/4 75-1/2 75-3/4 12703-1/2 1/4 47-1/4 87-1/2 75-3/4 15604 1/4 47-1/4 99-1/2 75-3/4 16705 1/4 47-1/4 123-1/2 75-3/4 1950Light Duty*1/2 11 GA. 31-1/2 33-1/2 54 3301 11 GA. 37-3/4 39-1/2 64-34 4501-1/2 11 GA. 46-1/4 39-1/2 75-3/4 5202 11 GA. 46-1/4 51-1/2 75-3/4 6103 11 GA. 47-1/4 75-1/2 75-3/4 850Crane-Dumping BucketsApex crane-dumping buckets are handled with overhead cranes in mills,foundries, machine shops, construction and steel plants. The design permitseasy dumping by throwing a lever. After the load is dumped, the bucketreturns to the upright position. Four standard sizes include 3/4, 1, 1-1/2 and2 cu. yd. capacity. Options such as lanyard releaseand casters are available.Approx. Overall Dim. (in) Approx.Cap. Thkns. Wt.(cu.yd) (in) Height Width Length (lbs)3/4 3/16 46 39-3/8 51 7001 3/16 51 45-3/8 53 7801-1/2 3/16 55-1/4 54-3/4 61-5/8 10002 1/4 60 57-1/2 66 1260* Light Duty Hoppers aredesigned the same as ourstandard heavy duty hoppers,but constructed with 11gauge body and 7 gaugestructural base.Multi-Dump BucketsThis drop bottom bucket can be used with either lift truck or overheadcranes for loading, transporting and dumping free flowing materials.Three standard sizes include 1, 1-1/2 and 2 cu. yd. capacity. Options areavailable. Chemical, glass, sewage and otherindustries utilized the Multi-Dump.Approx. Overall Dim. (in) Approx.Cap. Thkns. Wt.(cu.yd) (in) Height Width Length (lbs)1 3/16 41 39-5/8 63-3/8 8751-1/2 3/16 47-3/4 45-7/8 66-1/4 10402 1/4 57 46 70-3/8 1300Tow-N-Dump HoppersTow and dump almost any type of bulk materials such as sand, gravel,fertilizer, wood and cement with the Apex Town-N-Dump Hopper and yourlight weight vehicle. Standard sizes are 1, 1-1/2 and 2 cu. yd. capacity.Units are used by rental centers, fire departments, sewage plants, cities,parks, etc. Various options available includinglids, brakes and special colors.Approx. Overall Dim. (in) Approx.Cap. Thkns. Wt.(cu.yd) (GA) Height Width Length (lbs)1 7 53-1/4 64 109-1/2 9401-1/2 7 63-1/4 64 125-1/2 12102 7 61-3/4 76 125-1/2 1250APEX/CST ®WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>Bulk BinsApex custom sized bulk bins are built to customers specifications when avariety of material handling applications require a special unit. We candesign a unit suited to your needs. Prices quoted based on size, platethickness, reinforcements and options such as: stacking, fork pockets,drains, casters, paint and more.Overall Dim. (in) Approx.Cap.Wt.(yd) Height Width Length (lbs)3/4 33 33 33 4351 36 36 36 4751-1/2 36 44 44 5752 47 44 44 625OPTICAL INSTRUMENTSInstrument Selection GuideChoose the CST/Berger Instrument best suited to your needs by answeringthe following questions and consulting the chart below.1. Do I need to measure horizontal (level) and/orvertical (plumb) angles?2. What leveling accuracy do I require?3. How far is my working range?Berger Optical Levels and Transit-LevelsCat. Leveling Horz. Vertical WorkingNo. Magnification Accuracy Angle Angle Range54-135 20X 1/4" at 100' n/a n/a up to 200'54-136 20X 1/4" at 100' n/a – up to 200'54-190B 20X 1/4" at 100' 15 min. n/a up to 200'54-200B 20X 1/4" at 100' 15 min. 1° up to 200'54-290B/-2900P 22X 1/8" at 100' 5 min. n/a up to 250'54-300B/-3000P 22X 1/8" at 100' 5 min. 1° up to 250'56-609 24X 1/16" at 100' 5 min. – up to 300'56-LTU 20X 1/8" at 100' n/a – up to 250'56-SCT1 20X 1/8" at 100' 1 min. 1 min. up to 250'56-SCT5 20X 1/16" at 100' 5 min. 5 min. up to 250'Digital TheodoliteCat. Leveling Horz. Vertical WorkingNo. Magnification Accuracy Angle Angle Range56-DGT20 30X 1/8" at 100" 20 sec. 20 sec. up to 400'SAL Automatic LevelsCat. Leveling Horz. Vertical WorkingNo. Magnification Accuracy Angle Angle Range55-SAL20ND 20X 1/8" at 100' 1° n/a up to 200'55-SAL24ND 24X 1/16" at 150' 1° n/a up to 300'55-SAL28ND 28X 1/16" at 200' 1° n/a up to 350'55-SAL32ND 32X 1/16" at 250' 1° n/a up to 400'LaserMark ® Rotary LasersCST ®Cat. Laser Leveling Working Range, dia. Self-LevelingNo. Beams Diode Accuracy Indoor/Outdoor* Range57-LM10 1 635nm 1/4" at 75' up to 150'/600' n/a57-LM20/-LM20H 2 635nm 1/4" at 75' up to 150'/600' n/a57-LM100 1 635nm 1/4" at 100' up to 200'/800' n/a57-LM200 2 635nm 1/4" at 100' up to 200'/800' n/a57-LM300 2 635nm 1/8" at 100' up to 200'/800' n/a57-LM400-1 1 635nm 1/8" at 100' up to 1000' ±5°57-LM400-2 2 635nm 1/8" at 100' up to 1000' ±5°57-LM400-3 1 635nm 1/8" at 100' up to 1000' ±5°59-LM500 1 650nm 3/32" at 100' up to 1000' ±20 arc minutesLaserMark ® Straight Line LasersCat. Laser Leveling Working SpecialNo. Diode Accuracy Range Features57-MMTL8 650nm 1/4" at 50' up to 50' Money-saving laser level57-LMETL8 650nm 1/4" at 50' up to 50' Fixed level, plumb, & 45° vial57-LMTL8 635nm 1/4" at 100' up to 100' Graduated inclinometer57-LMTL8M 635nm 1/4" at 100' up to 100' Magnetic base57-LMETL50 650nm 1/4" at 50' up to 50' Cast aluminum construction57-LMTL30 635nm 1/4" at 100' up to 100' Precision glass diode lens57-LRL32N 650nm 1/4" at 100' up to 100' Lightweight, 24" length58-GIZMO 635nm (2) 3/16" at 30' up to 32' Two diodes form laser cross;self levelingSpecifications are subject to change without notice. *–when used with detector30-130<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-2Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Digital TheodoliteCST/Berger now offers electronic precisionand ease with the new DigitalTheodolite/Transit.Instantly displays horizontal and vertical anglesin digital form; no verniers to align or lines tomatch! So simple to operate, anyone at a constructionsite can use it without special training.An electronic transit with a 20 second digitalreadout, the DGT-20 measures horizontal andvertical angles using an incremental encoderdetection system. Key operation is very simple,and all angle readings are displayed digitally onan LCD window. The telescope optics produce abright, erect, 30X image. This instrument alsocomes complete with a 3X optical plummet thatproduces an extremely bright, clear image.Features:• 20 second vertical and horizontal angular readout• Liquid crystal display (LCD)• Built-in display and crosshair illuminator for low light conditions• Clockwise or counterclockwise horizontal angle measurement options• Vertical angle measuring; provides three different options plus percentgrade• Automatic power shut-off withthree options: none, 20 minute,or 30 minute• Optical plummet• Zero resetting• Built-in battery pack can beattached and detached by asingle actionDIGITAL THEODOLITE SPECIFICATIONSTelescope Magnification: 30X Overall Length: 6.1"Objective Aperture: 1.8" Minimum Focus: 53"Field of View: 1°30' Resolving Power: 2.5"Stadia Ratio: 1:100 Stadia Constant: 0Image: ErectElectronic Angle Method: <strong>Inc</strong>remental Minimum Reading: 10"/20"Measurement Accuracy*: 20" Diameter of Circle: 3.2"Illumination Display and ReticleOptical Plummet Magnification: 3X Field of View: 5°Focusing Range: 20" toLevel Vial Plate Vial: 60" per 2mm Circular Vial: 8' per 2mmSensitivityDisplayOperating Voltage Required: Operating Time (Alkaline Batteries):Operating Range 4-6 VDC (4 AA Batteries) 15 hrs. continuous use @ 68°FSize 5.7" x 6.9" x 12.8"Weight Instrument: 9.4 lbs. Case: 7.9 lbs.* –Standard deviation based on DIN18723.Enclosed TransitsTough, reliable, affordable - both transits aredesigned and manufactured for day in/day outperformance on building sites.Both transits feature a full transiting 20X telescopewith exceptionally clear optics. The aluminumcenter mechanism is accuratelymachined and fitted. Both units also have 5/8" x11 threads and three leveling screws.Each transit includes a hardshell case withinstruction manual, rain cover, adjusting pin, twoscrewdrivers, lubricant, through compass, anddiagonal eyepiece adapter with solar filter forboth telescope and reader.56-SCT5 – 20X Contractor’s 5 minute Transitwith accessories56-SCT1 – 20X Contractor’s 1 minute Transitwith accessories56-DGT 2056-DTEP56-DTSF• Vertical and horizontal readings shown on one big screen• Sealed construction• <strong>Inc</strong>ludes hard-shell carrying case, manual, and accessories• Color available: Yellow; Orange available by request56-DGT20 – Digital Theodolite/Transit56-DTEP – Diagonal Eyepiece56-DTSF – Solar Filter56-SCT5CST ®WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337SAL SeriesAutomatic LevelsUpgrade to the latest features andtechnology with CST/Berger’s SALSeries Automatic Levels! These unitsnow incorporate easy-to-grip stylingand an improved compensator.Designed for the contractor, surveyor,or engineer who demands accurateleveling every time, SAL automaticlevels set up fast, are easy to use, andsave time and money on every job. The SAL Series offers your choice ofoptions: magnification, accuracy, and price.Features:• Magnetically-dampened, wire-hung compensator for optimum range andaccuracy• Compensator lock protects instrument during transport or storage; alsoacts as a handy compensator checking tool• Large effective aperture and minimum focus of 1 foot (0.3m)• Top-mounted optical peep-sight for quick reference• Large, easy-to-use precise focusing knob• Easy-to-read horizontal circle• Penta prism for easy bubble viewing• Sealed, dust-protected leveling screws• Water-resistant, sealed construction plus sunshade for use in variousweather conditions• Fine motion knobs on left and right sides with friction-braked rotation,endless horizontal drive• 1:100 stadia for distance estimation• 5/8" x 11 threads to fit standard tripods• Available in 360 degrees or 400 gons;please specify• Five Year Warranty• <strong>Inc</strong>ludes hardshell carrying case withdual latches, plumb bob, Allen wrench,adjusting pin, and instruction manual55-SAL20N – 20X SAL Automatic Level55-SAL24N – 24X SAL Automatic Level55-SAL28N – 28X SAL Automatic Level55-SAL32N – 32X SAL Automatic LevelSAL Automatic Level Kits – Eachmoney-saving kit includes an automaticlevel with case and accessories, plus a#60-ALQC20 tripod, and a #06-808C rod.55-SLVP20N* – 20X SAL Automatic Level Kit55-SLVP24N* – 24X SAL Automatic Level Kit55-SLVP28N* – 28X SAL Automatic Level Kit55-SLVP32N* – 32X SAL Automatic Level Kit55-SLVP20ND55-SAL24NDNOTE: Please add “D” for degrees or “G” for gons after the catalog number(e.g. 55-SAL20D).* –Metric Kits: please add “M” for metric kits, which will include 60-ALQC20tripod and 06-804M rod.SAL SPECIFICATIONSSAL 20 SAL 24 SAL 28 SAL 32Magnification 20X 24X 28X 32XLeveling Accuracy 1/16"@100' 1/16"@150' 1/16"@200' 1/16"@250'Working Range (ft) 200' 300' 350' 400'Angular Accuracy 1°/1 gon 1°/1 gon 1°/1 gon 1°/1 gonClear Objective Aperture 36mm 36mm 40mm 40mmCompensator ±0.8" ±0.8" ±0.5" ±0.3"Setting AccuracyStandard Deviation for 2.5mm 2.0mm 1.5mm 1.0mm1km Double-Run LevelingALL SAL MODELS:Telescope Image: Erect Length: 8"Minimum Focus: 1 ft. Field of View: 1°20'Resolution: 3.5" Stadia Ratio: 1:100Stadia Addition: 0Horizontal Circle Diameter: 4" Min. Division: 1° (1 gon)Numbered Every: 10° (10 gon)CenterType: SpindleCircular Level Vial Sensitivity: 8'Compensator Type: Wire Hung Working Range: ±15'TangentStyle: Continuous DriveLeveling HeadThree (3) screwsTripod Fastener 5/8 x 11 (M16); can be used with flat or dome head tripodsInstrument Net Weight 4 lbs.
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Berger Speed Series Levels &Transit-LevelsBerger has been building quality, reliability, and value into theirinstruments since 1871. Made in USA.Use Berger levels for:54-200K• Determining grades & elevations• Establishing grade• Laying out & leveling foundations• Setting forms• Leveling walls• Squaring corners• Setting offset stakesIn addition, use Berger transit-levels for:• Plumbing walls• Creating lines• Truing forms• Aligning poles, fence postsThese Precision Instruments Feature:• Non-strip focus knob• Built-in sunshade• Large coated achromatic lenses• Rubber eyepiece• Brass leveling screws• Dust protected eyepiece with fixed cross hairs• High precision glass level vials• 4-1/2 foot (1.4m) short focus• Stainless steel sliding lock levers to lock telescope (on transit-levels)• One piece aircraft aluminum telescope• Powder coated safety yellow paint• One Year Warranty• All Speed Series instruments are available in a money-saving kit,which includes a 60-ALQC20 aluminum quick clamp tripod and06-808C telescoping aluminum rod20X ECONO LINE LEVEL & TRANSIT-LEVELFast setup–simple to use. Model 135 is designed strictly for leveling, andModel 136 is used for leveling, plumbing,or running vertical lines. EconoLine instruments have no circles orvertical arc. Units use 1/2 x 20 thread.Both models provide 1/4" accuracy at100 feet with a 200 foot working range.54-13554-135K Model 135 Level Kit; includes#60-ALQC21 tripod, #06-808Crod, carrying case and manual54-135 Model 135 Level, carrying caseand manual54-136K Model 136 Transit-Level Kit;includes #60-ALQC21 tripod,#06-808C rod, carrying caseand manual54-136 Model 136 Transit-Level, carryingcase and54-136manual20X SPEED LINE LEVEL & TRANSIT-LEVELOur most popular models with builders that require rough angleturning and fine tuning adjustments. Theseinstruments have clamps and tangentsthat bring your instrument quickly on target.15 minute horizontal circle on bothmodels and 1° vertical arc on Model 200B allowthe builder to set rough angles. Units use 1/2 x 20thread. Both models provide 1/4" accuracy at 10054-190Bfeet with a 200 foot working range.54-190K Model 190B Level Kit; includes#60-ALQC21 tripod, #06-808Crod, carrying case and manual54-190B Model 190B Level with 15 minutehorizontal circle, carrying case andmanual54-200K Model 200B Transit-Level Kit; includes#60-ALQC21 tripod, #06-808C rod,carrying case and manual54-200B54-200B Model 200B Transit-Level with 15 minutehorizontal circle, 1° vertical arc, carrying case and manualCST ®WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.833722X MAGNUM LINE LEVEL & TRANSIT-LEVELThese units are for the serious builder orcontractor who requires greater accuracy.These instruments are designed with aheavy-duty dome shaped head that holdsa double ball bearing center, giving the user 5minute readouts. Model 300B has a 1° vertical arcand two leveling vials. Units use a 3-1/2 x 8thread. Both models provide 1/8" accuracy at 100feet with a 250 foot working range.54-290K Model 290B Level Kit; includes#60-ALQC25 tripod, #06-808Crod, carrying case and manual54-290B Model 290B Level with 5 minute horizontalcircle, carrying case and manual54-300K Model 300B Transit-Level Kit; includes#60-ALQC25 tripod, #06-808C rod, carryingcase and manual54-300B Model 300B Transit-Level with 5 minutehorizontal circle, 1° vertical arc, carryingcase and manual<strong>Equipment</strong>22X MAGNUM LINE LEVEL &TRANSIT-LEVEL WITH OPTICALPLUMMETThese units eliminate the need for a plumb bobfor fast and easy setup over a point. Instrumentfeatures are similar to above; unit uses 5/8" x 11tripod thread base, and three leveling screws.Model 300OP has a 1° vertical arc and two levelingvials. Both models provide 1/8" accuracy at100 feet with a 250 foot working range. 3X opticalplummet features 5° field of view, and a focusrange of 20" to infinity.54-290OP Model 290OP Level with Optical Plummet, 5 minute horizontalcircle, carrying case and manual54-300OP Model 300OP Level with Optical Plummet, 5 minute horizontalcircle and 1° vertical arc, carrying case and manualLine Transfer Unit (LTU)Almost indispensable in obtaining line and invert in pipe laying operationswhen using a pipe laying laser instrument, these LTUs can be used withpipe aligning lasers or as transit-levels. Both models allow fast setup anddouble-checking of laser's grade, and can also be used for leveling andgrading work.The Value Line LTU is anaffordable, fully featured20X instrument featuring astandard 5/8" x 11 basewith three leveling screws.Instrument includes hardshellcarrying case withmanual, adjusting pin, twoscrewdrivers, lubricant,and diagonal eyepieceadapter with solar filter.The Berger LTU is aheavier-duty, higher accuracy,24X instrument witha 5 minute horizontal circle56-LTU54-290B54-300B54-300OP56-609and built-in sunshade. Stress resistant dome shaped leveling heads and adouble stainless steel ball bearing center contribute to this unit’s reliability.3-1/2" x 8 base. Instrument includes hardshell carrying case with manual,adjusting pin, and dust cap.56-LTU Value Line LTU and accessories56-609 Model 609 Berger LTU and accessories30-330<strong>Equipment</strong>
<strong>Equipment</strong>TRIPODSQuick Clamp Wood/FiberglassTripodsAn outstanding combination of hard maple legswith fiberglass dowels makes this the most versatiletripod on the market. Our fiberglass dowels areunique due to their structural plastic polystyrenecore, and will not shrink or swell under changingweather or temperature conditions. Also featurespowder painted metal parts, double banded extensionlegs for extra stability, and shoulder strap.60-WDF20 72" open, 42" closed, 5/8" x 11 thread,flat head; 16 lb. net wt.60-WDF25 72" open, 42" closed, 3-1/2" x 860-WDF30Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229thread, flat head; 16 lb. net wt.97" open, 59" closed, 5/8" x 11 thread,flat head; 26 lb. net wt.Quick Clamp AluminumTripodsLightweight, heavy gauge aluminum and the addedstability of double banded legs put this extensionleg tripod “head and shoulders” above other aluminumtripods. Outstanding features include positivelocking clamps, powder painted wear-resistantmetal parts and shoulder strap.60-ALQR20 65" open, 42" closed, 5/8" x 11thread, flat head; 12 lb. net wt.60-ALQR25 65" open, 42" closed, 3-1/2" x 8thread, flat head; 12 lb. net wt.60-ALQR40 65" open, 42" closed, 5/8" x 11thread, dome head; 12 lb. net wt.60-ALQR2060-WDF20CST ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Heavy Duty Aluminum TripodsOur aluminum tripods offer rigidity and strength as one of the surveyor’s,engineer’s, and contractor's most necessary tools. Tripods are wide frameextension leg type. Heavy duty hardware is brightly painted your choice ofinternational orange or black; extension legs and side struts are anodizedsilver. Tripods feature interchangeable heads andcome complete with poly-webbing shoulder strap andreplaceable hardened steel shoe points. Wing nuttype clamping.60-ALW10 25" open, 19" closed, 5/8" x 11 thread,flat head; 10 lb. net wt.60-ALW20 65" open, 42" closed, 5/8" x 11 thread,flat head; 14 lb. net wt.60-ALW25 65" open, 42" closed, 3-1/2" x 8 thread,flat head; 14 lb. net wt.60-ALW30 97" open, 59" closed, 5/8" x 11 thread,flat head; 19 lb. net wt.60-ALW35 97" open, 59" closed, 3-1/2" x 8 thread,flat head; 19 lb. net wt.60-ALW40 65" open, 42" closed, 5/8" x 11 thread,dome head; 14 lb. net wt.Aluminum Straight Leg TripodsOur aluminum straight leg tripods offer strength andrigidity as one of the contractor’s most necessarytools. Tripods are 60" tall, complete with carryingstrap and replaceable shoe points.60-ALW50 5/8" x 11 thread, flat head;11 lbs. net wt.60-ALW55 3-1/2" x 8 thread, flat head;11 lbs. net wt.60-ALW60 5/8" x 11 thread, dome head;11 lbs. net wt.60-ALW4060-ALW60Heavy Duty Wood TripodsMade from the finest hardwoods available anddie cast aluminum metal parts, these wide-frameextension leg tripods are constructed with 1"diameter wood dowels. Each tripod has a handholdhole in one leg and comes complete with apoly-webbing shoulder carrying strap. Tripodsare expertly treated, finished, and painted--woodparts are international yellow, hardware is internationalorange. All tripods come with a yellowABS plastic cap. Wing nut type clamping.60-WDW10HV 25" open, 19" closed, 5/8" x 11thread, flat head; 12 lb. net wt.60-WDW20HV 72" open, 42" closed, 5/8" x 11thread, flat head; 16 lb. net wt.60-WDW25HV 72" open, 42" closed, 3-1/2" x 8thread, flat head; 16 lb. net wt.60-WDW20HV60-WDW30HV 97" open, 59" closed, 5/8" x 11 thread, flat head; 21 lb.net wt.60-WDW40HV 72" open, 42" closed, 5/8" x 11 thread, dome head; 16 lb.net wt.NOTE: Additional features available: different colors, private labeling, support cables,and battery brackets. Contact CST for further info.Heavy Duty Value Line TripodsThese heavy-duty extension leg tripods are anoutstanding value.AluminumFeatures:• Net weight 12.5 lbs.• Electrostatically powder painted castings for adurable and long-lasting finish• Thick gauge anodized aluminum extrusions• 66" open, 40" closed length• Heavy-duty poly-webbing shoulder strap• Hardened steel tripod shoe points60-ALV20 Aluminum Value Line Tripod with wingscrew clamp, 5/8" x 11 thread, flat head60-ALVQR20 Aluminum Value Line Tripod with quickclamp, 5/8" x 11 thread, flat headWood, Wood/FiberglassSame features as above. Wood tripod has hardwoodlegs and dowels; wood/fiberglass tripod hashardwood legs and fiberglass dowels. Net weight14.5 lbs.60-WDV2060-WDVF20Wood Value Line Tripod with wingscrew clamp, 5/8" x 11 thread, flatheadWood/Fiberglass Value Line Tripodwith wing screw clamp, 5/8" x 11thread, flat head60-ALV2060-WDV2030<strong>Equipment</strong>30-4WWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Contractors TripodsOur popular Contractors’ Tripods offer a positive locking quickrelease or wing nut style clamp.Features:• Lightweight and durable aluminum hinge, clamp and shoe castings• Hinges are attached with screws, not rivets• Heavy-duty poly-webbing shoulder strap• Electrostatically powder painted castings for a durable and long-lastingfinish• Features MATRIXALUMINUM:The Price Is Right! Our aluminum tripod has valuewritten all over it. This tripod is stronger and morerigid than comparable tripods. This aluminum tripod isavailable with a variety of thread sizes and with eithera flat or dome head. 9 lb. (4.1kg) net weight.Wing Nut Clamp60-ALC20 63" open, 38" closed, 5/8" x 11 thread,flat head60-ALC40 63" open, 38" closed, 5/8" x 11 thread,dome headQuick Clamp60-ALQC20 63" open, 38" closed, 5/8" x 11 thread,flat head60-ALQC21 63" open, 38" closed, 1/2" x 20 thread,flat head60-ALQC25 63" open, 38" closed, 3-1/2" x 8thread, flat head60-ALQC40 63" open, 38" closed, 5/8" x 11 thread,dome headNEW! Quick Clamp, with replaceable shoe points,individually tightened hinge screws. New 25% largertripod head, and hinge stops to prevent legs fromslipping out.60-ALQCI20 63" open, 38" closed, 5/8" x 11 thread,flat head60-ALQCI40 63" open, 38" closed, 5/8" x 11 thread,dome headWOOD:Finally an all hardwood tripod at an aluminum price!Streamlined but robust, we challenge you to find awood tripod for this price that has this quality. Brightyellow with orange hardware, and replaceable shoepoints. Wing nut type clamping. 12 lbs. (5.5kg) netweight.60-WDC2070" open, 42" closed, 5/8" x 11 thread,flat headFIBERGLASS:Perfect for contractors and builders; great with lasersand levels! All fiberglass construction provides unbelievablestrength and durability. These tripods will takea beating and come back for more! 12 lbs. (5.5kg) netweight provides a good foundation but is still easy tohandle. Quick release clamp.60-FGQC20 70" open, 42" closed, 5/8" x 11 thread,flat head60-FGQC40 70" open, 42" closed, 5/8" x 11 thread,dome headTripod Accessories60-TFG20 Tripod Floor GuideThis is designed to provide your tripodstability when used indoors on concreteand other slick surfaces. Recommendedfor use with elevator column tripods.60-BAG20 – Tripod Carrying BagBright orange Cordura TMtripod bag featuresdrawstring closure and fits tripodsup to 45" (114cm) in closed length.61-2512 – Universal Plastic Tripod Cap,5/8" x 11 threads60-TFG2060-BAG2060-WDC2060-FGQC20CST ®60-ALQC20SIGHTING RODSWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Telescoping Aluminum RodsCST’s telescoping aluminum rods are made of a light anddurable aluminum alloy. The anodized sections areimprinted with special weather resistant and corrosionresistant inks. Tight tolerances on extruded aluminumsections allow for smooth extension and preventunnecessary clattering and sloppiness. The sectionaljoints are injection molded from a durable lightweightimpact-resistant plastic. Rods are equipped with reliableand wear-resistant polycarbonate buttons that lockeach section. Easy-to-read graduations and a specialmeasuring scale on the backside permit users to readheight at eye level.06-808A 8', 3 Section, feet/10ths; 3 lbs. net wt.06-808C 8', 3 Section, feet/inches; 3 lbs. net wt.06-808M 2.5m, 3 Section, metric “E”; 3 lbs. net wt.06-813 13', 4 Section, feet/10ths; 4 lbs. net wt.06-813C 13', 4 Section, feet/inches; 4 lbs. net wt.06-816 16', 5 Section, feet/10ths; 4.5 lbs.net wt.06-816C 16', 5 Section, feet/inches; 4.5 lbs. net wt.06-804M 4m, 4 Section, Metric “E”; 4 lbs. net wt.06-8042MM 4m, 4 section, Metric dm, cm, 2mm06-805M 5m, 5 Section, Metric “E”; 4.5 lbs. net wt.06-805MMM 5m, 5 Section, Metric 1/2 cm, mm,alternating yellow & white face<strong>Equipment</strong>Folding Builders RodsThese highly practical and economical “Hultafors” style folding rods aredesigned for all types of leveling applications. Made of select hardwoods,5/8" (16mm) thick, 1-3/8" (35mm) wide with brass shoes for durability.Brass swivel joints allow the rods to be extended and securely locked intoplace. Four-section yellow face rods are graduated on both sides; graduationsare clearly and accurately silk screened onto the wood.08-4124TE 13', 10ths & <strong>Inc</strong>hes08-7124MMM08-5124MT 4m, Metric “E” & 10ths08-6124ME 4m, Metric “E” & <strong>Inc</strong>hes08-7124MMM 4m, Metric “E” & cm, mmNOTE: Rods are available with level vial at a nominal extra charge.Fiberglass Leveling RodsThese rugged oval-shaped rods are waterproof,corrosion-resistant and nonconductive, and featurean abrasive-resistant coating with specialreinforcement ribs to stop breakage and add stability.Easy-to-read graduations and a specialmeasuring scale on the backside permit users toread height at eye level. Rods are equipped withreliable and unbreakable buttons that lock eachsection. All rods are SVR series with stadia, andcome with a carrying case.06-725 25' Fiberglass Rod, graduatedfeet/10ths, 6-1/2 lbs. net wt.06-725C 25' Fiberglass Rod, graduatedfeet/inches, 6-1/2 lbs. net wt.06-716 16' Fiberglass Rod, graduatedfeet/10ths, 3 lbs. net wt.06-716C 16' Fiberglass Rod, graduatedfeet/inches, 3 lbs. net wt.06-707M 7.6m Fiberglass Rod, graduated metric, 6-1/2 lbs. net wt.06-705M 5m Fiberglass Rod, graduated metric, 3 lbs. net wt.06-725C 06-705M06-8042MM06-805MMM06-808CDual Face Telescoping Aluminum RodsIt's like having two rods in one! Dual face rods include all of the above featuresbut are graduated on both sides; one side in metric, the other in feetand inches.06-804MC 13'/4m, 4 Section, Metric “E” and feet/inches06-805MC 16'/5m, 5 Section, Metric “E” and feet/inches06-805MT 16'/5m, 5 Section, Metric “E” and feet/10ths30-530<strong>Equipment</strong>
30<strong>Equipment</strong>06-Series Rod Accessories06-820 Heavy Duty NylonBag for Aluminum RodHeavy-duty Cordura TMbagwith tie end. One size fits all.06-850 Snap On Rod LevelA perfect complement to CST’s aluminumrods, this snap on rod level fits snugly ontothe 06-Series rods and allows quick andconvenient leveling. Made from a durableengineered plastic, this rod level has a 30min. vial.Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Metal Face Builder’s RodsChicago Series metal face builder’s rods are perfect forleveling, building layouts and construction. These finequality rods are built tough to withstand rough treatment.Manufactured from fine Northern hardwood, the rods havea natural finish that won’t chip or peel. Graduations andnumbers are clear and easy to read against the replaceablematte finish metal face; permanently bonded faces won’tfade or chip. All rods have black graduations with foot marksand instant reading numbers in bright red.07-308A 8', 2 Section, graduated feet/10ths/100ths07-308C 8', 2 Section, graduated feet/inches/8ths07-308M 2.44m, 2 Section, graduated dm/cm/1/2cm07-309A 10', 2 Section, graduated feet/10ths/100ths07-309C 10', 2 Section, graduated feet/inches/8ths07-309M 3.05m, 2 Section, graduated dm/cm/1/2cm07-314A 14', 3 Section, graduated feet/10ths/100ths07-314C 14', 3 Section, graduated feet/inches/8ths07-314M 4.27m, 3 Section, graduated dm/cm/1/2cmNOTE: Use Target 06-401 or 06-402. When orderingTarget, designate A, C or MWood Rod LevelCST’s rod level includes a 10-minute circular vial forimproved accuracy! Heavy-duty frame is made of astrong aluminum die casting, painted a bright red. Thevial is a large 7/8" diameter, 10 min. per 1" sensitivity,securely mounted into a recessed black housing.06-750 Rod Level, adjustable vialWood Rod Targets06-401 San Francisco Rod Target, with vernier,graduated 100ths06-401C Same as 06-401, graduated 64ths06-401M Same as 06-401, graduated metric mm06-402 Builders Rod Target, no vernier06-410 Oval Target for Philadelphia Rods, withoutmicrometer adjustment, heavy diecast zinc alloy, graduated 100ths06-410C Same as 06-410, graduated 64ths06-410M Same as 06-410, graduated metric mm06-411 Oval Target for Philadelphia Rods, withmicrometer adjustment, heavy die castzinc alloy, graduated 100ths06-411C Same as 06-411, graduated 64ths06-411M Same as 06-411, graduated metric mm06-40206-41107-309ACST ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337MAGNETIC LOCATORSMagna-Trak ® Magnetic LocatorsWith their advanced technology, low price, and five yearwarranty, the Magna-Trak ® Series gives you the best valuein the industry.Our Magna-Trak ® magnetic locators take technology onestep into the future by including a multitude of conveniencefeatures you won’t find anywhere else; features like an LCDvisual display and/or audio tone, a lightweight, easy-gripdesign, and water resistant cases.Magna-Trak ® locators also feature easy battery access andoutstanding battery life, and they're backed by a 5-year warranty!Plus, our patented electronic balancing procedure allowsbalancing to be done quickly and efficiently and all of our manufacturingis done right here at CST to ensure quality control.The latest technology doesn't have to cost a lot. Get the bestperformance and the best value with a Magna-Trak ® locator.Features:• Length: 42-3/4"; Weight: 3 lbs./1.3kg• Waterproof up to housing; water-resistant housing• Signal indicating LCD meter (models 100 and 102 only)• Easy access battery compartment• On/Off, Volume, and Sensitivity Controls• Strong, lightweight aluminum tube• “High-Tec” magnetic toroidal sensors and patented electronicbalancing circuitry• Durable hard rubber tip• Battery life ±100 hours; low battery indicator on LCD models• Available with soft padded or hard carrying case*–U.S. Patent No. 4,439,732MAGNA-TRAK 100 ®The Original! The Magna-Trak 100's LCD indicatoroffers a digital bar graph display, in addition to a standardaudio tone, to precisely identify the target object,especially in noisy, congested areas. An additionalfeature is a visual reminder when batteries are low.The lightweight Magna-Trak 100 features simple,waterproof, push-button membrane pad operation withan ergonomic design. The Magna-Trak 100 offers easybattery access and outstanding battery life, and isbacked by a five-year warranty.19-550 Magna-Trak 100, soft case19-551 Magna-Trak 100, hard caseMAGNA-TRAK 100 ® DISPLAYThis “Point of Purchase” (POP) display is a great sales tool and is veryinformative for the user, too. Easy to set up and take down. Display liststhe key features of the MT-100 and provides depth location capabilities.19-550D Display Case with Four Units, soft cases19-550DH Display Case with Four Units, hard casesMAGNA-TRAK 101 ®The Value-Priced Standard! Our low-costMagna-Trak 101 magnetic locator providesexcellent field performance at a budgetprice! It features quick-action, control knoboperation to adjust sensitivity and volume.The Magna-Trak 101 magnetic locator is astreamlined version of the Magna-Trak 100. TheMagna-Trak 101 features all the same componentsas the 100, minus the LCD meter display and membraneswitch. The operation of this locator is dependentupon only two rotary control knobs: sensitivity and volume.19-555 Magna-Trak 101, soft case19-556 Magna-Trak 101, hard case<strong>Equipment</strong>30-6WWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229MAGNA-TRAK 102 ®Feature-Packed for Versatility! The Magna-Trak 102 magnetic locator provides the samebasic performance features as the Magna-Trak100. However, with the addition of our push-button"erase" feature, greater flexibility is achieved and performanceis enhanced.When a magnetic disturbance, such as a metal fence, isconfronted, simply press the "erase" button and the disturbanceis erased for continued searching without interference. Noneed to reduce the sensitivity; the Magna-Trak 102 always returnsto perfect magnetic balance when the "erase" button is pressed.The Magna-Trak 102 locator also includes a power line indicator feature. TheLCD panel visually indicates that a power line is present. (CAUTION: Thisfeature is an aid only and is not intended for locating buried power lines.)19-557 Magna-Trak 102, soft case19-558 Magna-Trak 102, hard caseCARRYING CASES FOR MAGNA-TRAK ® LOCATORSProtect your investment; ourdurable cases are made to last.The bright yellow Magna-Trak®soft case is constructed ofpadded Cordura TMnylon. Zipsopen and closed, includes carryingstraps. Our hard cases featurea built-in handle, securelatches and textured black exterior,plus a tilt-up scabbard for easy locator removal.19-552 Soft Padded Case for Magna-Trak Locators, yellow19-553 Hard Case for Magna-Trak Locators19-559 Soft Padded Case for MT-102, chartreuseCST ® / Diamond ProductsHand Levels (continued)<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.833717-630 5X Magnifying Hand Level8" long round telescope tube extends to9". The objective lens ismounted on a movableslide which brings distantobjects into sharp focus;eyepiece focusing slide allowsregulation of crossline image. Features5x magnification of objective and 2xmagnification of level bubble, solid brassconstruction with a durable yellow finish,and 1:100 stadia lines.17-631 2X Magnifying Hand Level6" long with draw eyepieceextending to 8". Adjustablereflector and internally mountedbubble assembly.17-632 K & E Type 2X Hand Level2X magnification with all brassconstruction. Features 6" longdraw eyepiece extending to 7-1/2",adjustable reflector and internallymounted bubble assembly.CORE RIGS:Diamond Products<strong>Equipment</strong>Hand LevelsAll hand levels (except for 17-620)include a padded Cordura TMbelt loopcase.17-620 Pocket Sighting LevelIdeal for preliminary survey and simpledistance estimation. Sturdyimpact resistant body and easy-toreadprotected vial. <strong>Inc</strong>ludes instructionmanual. A CST/Berger best-seller!Sealed in blister pack.17-621 Locke Hand Level5" long square sighting tube withfixed eyepiece and a durable yellowfinish. This can be used as a benchlevel; when supported on a staff, it issufficiently accurate for running levelsin gardening or brick lines.17-622 Square 6" Hand Level6" long square sighting tubewith fixed eyepiece. Removablereflector unit permits right angleviewing when aperture is turnedoutward, and the reflector unit isplaced in an inverted position in thesighting tube.17-623 6" Hand Level6" long with fixed eyepiece,adjustable reflector and internallymounted bubble assembly. A hexagonalobjective cap prevents rolling.17-624 6" Round Hand LevelThis high quality 6" long hand levelhas all brass construction, a fixedeyepiece and an externally mountedbubble assembly. The hand levelbody is electrostatically powderpainted bright safety-yellow.Hexagonal objective cap preventsrolling.– continues –WWW.HANESSUPPLY.COMM-1 Drill RigsThe #1 Drill Rig In America• 1" to 10" bit capacity (14" with one spacer)• Dual switch/outlet control panel & amp meter• Slide handle permits drilling in tight areas• Streamlined base and carriage• 2-1/2" square column with black oxidized finish• Quick changeover from vacuum to anchor base• 6" wheels for better mobilityOrder complete:Our combination rig includes a combination anchor/vacuumbase, mast, carriage, control panel, vacuum pump, ceiling jack,motor mount plate and your choice of drill motor. Our anchorrig is the same as above except for its smaller anchorbase and does not include a vacuum pump. Selectfrom P/N’s listed below.Safety Combo AnchorMotor RPM Override Rig P/N Rig P/N20 Amp Dewalt 350/900 Slip Clutch 4245055 4545001M-1 Drill Stand DimensionsAnchor CombinationStand (in) Stand (in)A 43-3/4 44-1/4B 23-1/2 28-1/2C 6 13-1/2D* 24-1/4 24-1/4E* 5-5/8 5-5/8F 11 17G 16 23* For Dewalt motors.30-730<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-8Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229M-2 Drill RigThe #1 Pro Rig in America• Dual switch/outlet control panel & amp meter• 4 spoke handle• Precision ground & chrome plated 2-7/8" square mast• Quick changeover from vacuum to anchor base• 10" bit capacity (up to 36" with spacers and a hydraulicmotor and pillow block)• 6" wheels for better mobilityOrder complete:Our combination rig includes a combination anchor/vacuum base,mast, carriage, control panel, vacuum pump, ceiling jack, motormount plate and your choice of drill motor. Our anchor rig is thesame as above except for its smaller anchor base and does notinclude a vacuum pump. Select from P/N’s listed below.Safety Combo AnchorMotor RPM Override Rig P/N Rig P/N20 Amp Dewalt 350/900 Slip Clutch 4241050 4541001M-2 Drill Rig DimensionsAnchor Combo LargeStand (in) Stand (in) Anchor (in)A 44 44 44B 23-3/4 28-1/2 27C 7 13-1/2 15D 23-1/2 23-1/2 23-1/2E 5-1/2 5-1/2 5-1/2F 12-1/4 17 18-1/2G 17-1/4 23 20-1/2M-4 Rig3 Speed, Very Powerful & Just 35 lbs.• Weighs only 35 lbs. (rig - 20 lbs.,motor - 15 lbs.)• 6" bit capacity (3" handheld)• Converts to hand held drill motor in seconds• Combination stand quickly angles to 45°• 3-speed hand held drill motors with overloadclutches are available with choice of 110Velectric, 220V electric, air or hydraulic power• Mast can rotate 360° on swivel stand• Reversible slide handle (use on left side orright side of rig)• High strength, hard anodized, 1-1/2" x 2"aluminum column• 4 adjustable slide bearings provide superiorcarriage rigidity• Carriage lockA Centering PointerB Lifting HandleC Quick vacuum release valveD Locking slot capE Depth StopA Reversible slidehandleB Carriage lockC Adjustable slidebearingsD Handheld motorquick releaseDiamond ProductsM-2 CompleteCombination RigM-4 CompleteCombination RigThe WEKA DK12 Hand Held Drill workswell with our thinwall handheld bitsM-4 Drill Rig Dim.Combo Stand In.A 33-1/8B 19-3/4C 7-7/8D* 21-3/8E* 3-5/8F 16-7/8*For WEKA motor.DIAMOND SAWSWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337M-6 Drill StandQuit wrestling with big bits on small rigs.The M-6 Rig makes drilling large diameterholes faster and safer.• 2:1 gear reduction makes easy lifting oflarger bits• 18-inch bit capacity with standard pillowblock• Optional 4" x 6" steel tube spacersfor drilling up to 72" diameterholes• Available hydraulic pillow blockand extensions with 1-7/8"-7 or1-1/4"-7 threads for high torquedrilling• Heavy duty 15" x 12" roller carriage• Equipped with a beefy 72" tall 4"x 6" rectangular mast• Sturdy cast aluminum base• 6" rubber tread cast-iron wheelswith roller bearingsM-6 Drill Stand OnlyDescriptionP/NLarge anchor stand w/ 4277581wheels & quick disconnectmotor mounted platePlease note that the Pillow Block and hydraulic motor must beordered separately.Use P/N 4277539 for 1-1/4-7 spindle.Use Pillow Block P/N 4277540 for 1-7/8-7 spindle for use onbits 30" and up.CORE CUT - CONCRETE SAWS:CORE CUT ® Concrete Saw Specifications*:Max Blade Max Blade ArborModel Engine Guard Depth of Shaft SizeNo. (HP) Cap (in) Cut (in) Size (in) (in)CC1100 13 14 4-5/8 ø 1" ø 1"CC1300 13 14 - 18 6-5/8 ø 1-1/4" ø 1"CC1800 20 14 - 20 7-5/8 ø 1-1/4" ø 1"CC2500 25 14 - 26 10-3/8 ø 1-1/2" ø 1"CC3500 35 14 - 30 11-3/4 ø 1-3/4" ø 1"CC3700 37 14 - 36 14-3/4 ø 1-3/4" ø 1"CC6500 65 14 - 36 14-3/4 ø 1-3/4" ø 1"CC7100 72 14 - 42 16-3/4 ø 2" ø 1"CC7200 72 26 - 54 22-3/4 ø 2" ø 1"CC8000 72 14 - 54 22-3/4 2-1/2 ø 1"* Please call for further specifications on these & other sawsThe M-6 large bit drilling system shownwith drill stand, tube spacer, hydraulic pillowblock, hydraulic motor and bit extension(drill stand part no. 4277581)M-6 Drill StandHeight = 72", 96" or 120"Length = 23"Width = 19" (wheel to wheel)CC1100 Series:• Our patented ratchet raise &lower system is the fastest, easiestway to place the blade into& out of the cut. It has 11 depthsettings to choose from whichautomatically lock in place when thehandgrip is released. Settings are in1/2" increments.• Removable handles for easy storage.• Blade coolant is delivered from aninnovative dual multi spray water tubesystem which gets coolant to both sidesof the blade from the arbor to the top ofCC1100 Seriesthe blade• Power transmission to blade drive is via 3 molded notch 3VX premiumbelts – not 2, like some of our competitors, resulting in better cuttingperformance & longer belt life.• Self aligning blade shaft bearings• 4-5/8" cutting depth w/14" guard• Large wheels for easy mobility over curbs & rough surfaces
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229CC1300 Series :Compact, Portable & Rugged• Screw feed or patented ratchetraise & lower mechanism• Upcut models available• Left or right hand sawing• Self aligning blade shaft bearings• Available w/choice of 14" or 18" bladeguard. 6-5/8" cutting depth w/18" guard• Handle adjusts to saw operator's height* Many gasoline & electric power sourcesto choose from* Handle folds down for easy storage &transportCC1300 SeriesCC1800 Series :Large Saw Features in a Portable Saw• Screw feed raise & lower mechanism• Available w/push or hydrostatictransmission choices.• Variety of power options ingasoline, electric or hydraulicup to 20 HP• Left or right hand sawing• Self aligning blade shaft bearings• Available with choice of 14" or 20" bladeguard. 7-5/8" cutting depth w/20" guard• Available with a 10 HP electric motor• Handle adjusts to saw operator's height.* Blade drive is via 4 belts on 16 HP models& up. 14 HP models & below have 3 belts.CC1800 SeriesCC2500 Series :Delivers the Power of a Large Saw with thecompactness & economy of a Small One!• Economical screw feed raise & lower mechanism• Variety of engine options up to 25 HP• Rigid high strength box frame• Positive gear drive to rear axle viaEaton hydrostatic transmission• Large 5-gallon fuel capacity for longersawing between refills• Choice of 14", 20" or 26" slip-on bladeguards• Maximum cutting depth 10-3/8" witha 26" guardCC3500 Series:35 HP Service SawCC2500 Series• Utilizes many of the same heavy-dutycomponents we use on our bigger saws• Features Wisconsin 35 HP gasoline engine• Available w/a 20 HP or 30 HPelectric motor.• Maximum cutting depth 11-3/4" with a30" guard• Choice of 14" through 30" blade guards• Fits through a 30" door!* CORE-CUT ® large saws featureconvenient one hand saw controlCC3700 Series:CC3500 SeriesMulti-Application SawThe most Compact 65 HP Saw on the Market - Fits through a 30" Door!• One hand sawing control.• Features 37 HP or powerful 65 HP Wisconsin gasolineengines (also available w/ 28 HP Deutz Dieselengine)• Choice of 14" through 36" blade guards.Maximum cutting depth 14-3/4" with a36" guard• Available w/a 25 HP or 40 HP electricmotor.• Has a frame designed for the higher torque ofa large horsepower engine but more compactthan the CC6500* CORE CUT ® large saws have the best bearings,blade flanges and blade shafts in the business.CC3700 SeriesDiamond ProductsWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>CC6500 Series:• One hand sawing control• Features Wisconsin 65 HP gasoline engine• Choice of 14" through 48" blade guards• Available with a 30 or 40 HP electricmotor• Maximum cutting depth 14-3/4"w/36" guard (19-3/4" w/optional48" conversion kit)• Fits through a 36" door* CORE CUT ® frames are the best in thebusiness, which improves your bladecutting speed and life.CC6500 SeriesCC7100 Series:Turbo Charged Diesel Production Concrete Saw• Longer life lower maintenance engine than 65 HPgasoline engine• Features Deutz 72 HP turbo charged engine.• 16-3/4" cutting depth w/42" guard• Extra heavy-duty reinforced single pieceframe• Choice of 14" through 42" bladeguards• Better fuel economy and much highersawing rates than a normal 65 HPgasoline engine.* Comes standard with CORE CUT’s ®Shaft Tachometer.CC7200 Series :CC7100 SeriesTurbo Charged Diesel Deep-Cut Saw• Features Deutz 72 HP turbo charged engine• Extra heavy-duty reinforced single pieceframe.• Available with a 40 HP or 50 HP electricmotor.• 22-3/4" cutting depth with 54" guard• Choice of 26" through 54" bladeguards• Longer life lower maintenanceengine than 65 HP gasolineengine.* Comes standard with CORECUT’s ® Shaft TachometerCC7200 SeriesCC8000 Series Rider Concrete Saw:Revolutionary New Concept That Delivers Maximum Flexibility• Hydraulic-driven blade shaft delivers an infinitely variable RPM with nohorsepower loss for 14" to 54" blade diameters.• Accommodates 14" through 54" blade.• Arm-mounted blade raises and lowers easily (while engine and operatorremain level)• Arm can be rotated for blade to enter cut at up to a 20° angle• 22-3/4" cutting depth with 54"guard• Less operator fatigue with lowmaintenance and easyserviceability.• Converts from a downcut to anupcut saw in less than aminute.• Heat exchanger for hydraulic oilutilizes air for cooling• 72 HP Deutz StandardCC8000 Series30-930<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-10Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Air Saws/Floor GrindersThe AirMatic 500 (Hand-Held) and AirMatic 700 (Walk-Behind) Dry CuttingPneumatic Saws are the Logical Alternatives to:• Clean, quiet anddependable• Lockable,multi-positionblade guard• Quick changeblade adapter• Direct drive -no beltsAirmatic SawsModel Engine Part Blade UncraftedNo. Type No. Cap. (in) Wt. (lbs)Airmatic 500 (hand-held) 4 HP Air 5800076 14" 22Airmatic 700 (walk-behind) 4 HP Air 5800077 14" 50AirMatic Saw AccessoriesDescriptionPart No.Cart (for Airmatic 500) w/o Dust Suppression 5800078Cart (for Airmatic 500) w/Dust Suppression 5800139Water Kit (for wet cutting) 60484211 qt. Ice Free Oil 6048427AirMatic 500 AirMatic 700Floor Grinder• Takes rough spots out of concrete surfaces in ahurry. Ideal on floors, roads, bridges, sidewalksand patios.• Cleans levels and smooths bumps and unevenareas. Removes paint spots and epoxies.Maneuverable and easy to operate.• Compact and easily adjustable for all typesof cleaning, grinding and feathering.• Large 10" diamond grinding head covers largesurface areas in minutes.• 10" diamond heads available with 10 or 20segments(Available in Heavy Duty Orange or PremiumBlack grades)Floor GrindersModel Engine Part Head UncraftedNo. Type No. Cap. (in) Wt. (lbs)**CB-CG8 8 HP Briggs 5800023 10 227CB-CG75 7.5 HP - 1 PH 230V Electric 5800111 10 300CB-CG75 7.5 HP - 3 PH Electric* 5800133 10 300*Specify 230V or 460V. 575V motors available on request. 50 cycle motors also available.** Add 40 pounds for crated weight.Block Saws (CC1000 Series)For the Masonry Contractor who Demands Productivity,Convenience and Safety• 20" Blade capacity cuts an 8" x 8" x 16"concrete block in a single pass• Foot pedal controlled operating headleaves operator’s hands free to guidematerial being cut• Heavy duty forklift brackets provide easeof movement with added safety• Stay-level blade guard with flange safetycover and cast-in water system assureblade is covered at all times• Totally enclosed blade shaft with dualbearing alignment• Precision screw feed raise and lowermechanism assures proper depth of cutModel Engine Part Blade UncraftedNo. Type No. Cap. (in) Wt. (lbs)CC1051 Block 5 HP - 1 PH Electric 5800027 20 355CC1053 Block 5 HP - 3 PH Electric 5800028 20 365CC1073 Block 7.5 HP - 3 PH Electric 5800029 20 395CC107G Block 7.5 HP Wisconsin Gas 5800030 20 408Diamond ProductsWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Masonry/Paver Saws (CC500M & CC400M)All That The Competitors Offer And More,For Less• Legs standard on all saws• Water pump standard on all electric models• Easy, safe access to depth control lock• Cooler running electric motors• 2.5 HP electric motor is strongest dual-voltagemotor on the market• Stay level guard• Removable head• Open throat cutting• Electric or optional Honda 5.5 HP gas power• Side carryingCC500M Masonry Saws and CC400M Paver SawsModel No. Power Source Part No. Wt.(lbs)**CC515M-E1 1.5 HP Baldor-115/230V Electric* 5800373 194CC525M-E1 2.5 HP Baldor-115/230V Electric* 5800375 194CC555M-H 5.5HP Honda 5800376 172CC415M-E1 1.5 HP Baldor-115/230V Electric* 5800377 225CC425M-E1 2.5 HP Baldor-115/230V Electric* 5800378 220CC455M-H 5.5 HP Honda 5800379 210*All electric motors are single phase.**Add 25 lbs. for crated weight.CC500M/CC400M DimensionsDimension CC500M* CC400M**A Saw Length 34" 36-3/4"B Saw Width 24-3/4" 24-3/4"C Saw Height 32-7/8" 28"D Stand Height 27" 27"E Total Height 58-3/8" 53-1/2"F Arbor Height 15-3/8" 6-3/4"Over CartG Cart Travel 20-3/4" 20-34"*Dimensions for CC500M are with electricmotor with cutting head raised to maximumheight.**Dimensions for CC400M are with gasolineengine.Hydraulic Hand Held Saw• Much more powerful than conventional gas saws• Designed for a variety of cutting applications• Delivers cutting depths up to 8"• Light weight, all-aluminum construction• Hydraulic powered for smooth, low vibration operation• Lower noise and less maintenance than comparable gas poweredcircular saws• Width of our .235 wide cutting blade matches our Diamond Chain Saw(just corner cut with the chain saw and save wear and tear on both saws!)• Water flow controlled through handle and runs only when the power is on!• Works with our multiflowpower pack andmany other types ofhydraulic power units• Built in flow restrictorkeeps saw at optimumspeed and preventsblade overspeeding• Built in roller base foreasy maneuverability16" Saw SpecificationsDP Part# 5800509Max. Depth of Cut 6"Blade Arbor Diameter 1"Max. Operating Pressure: 2500 psi (172 bar)Max. Flow Rate: 10-gpm/38 liters/min.Max. Blade RPM: 3,100Weight (uncrated): 27 lbs.Dimensions: Surface “A” = 18Width “B” = 7-1/4"Length “C” = 25"Roller to Roller “D” = 19-3/4"Height “E” = 11-3/8"– continues –CC525M-E1(shownw/optionalstand)
Hydraulic Hand Held Saw (continued)20" Saw SpecificationsDP Part # 5800510Maximum Depth of Cut 8"Blade Arbor Diameter 1"Max. Operating Pressure: 2,500 psi (172 bar)Max. Flow Rate: 8-gpm/30 liters/min.Max. Blade RPM: 2,450Weight (uncrated): 32 lbs.Dimensions: Surface “A” = 22"Width “B” = 7-1/4"Length “C” = 29"Roller to Roller “D” = 23-3/4"Height “E” = 13-3/8"Diamond ChainSaw• Eliminates overcuts• Light weight, portable(weighs just 41 pounds) andideal for working in tightspaces and openings• Great for deep cutting, irregularshapes, angles, cornerand plunge cuts• Flush cuts within 1 inch ofwalls• Available in 15" & 19" BarSizesDiamond Chain Saw Specifications823H Power Head* DP Part # 5802223Bar Cutting Depths: 15 and 19"Hydraulic <strong>Supply</strong> Requirements:Flow (max):Chain Type Material Rebar*Concrete Chain Reinforced Concrete up to 5/8"Medium AggregateCured ConcreteChain for Masonry Brick up to 1/4"Abrasives Materials Concrete BlockSoft Natural StoneAbrasive ConcreteLight Steel ReinforcingPremium Chain Reinforced Concrete up to 1-1/4"Very Hard Aggregate*Spacing of steel or rebar will affect cutting performanceBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.02298 gpm (30 liters/min.)2500 psi (172.5 bar)Note: For fixed-flow hydraulic systems producing more than 8 gpm(30 liters/minimum) use DP Model 70350 FlowAdapter ValveOperating Speeds:4,600 rpm motor speed (free running)4,000 sfm average chain speed (free running)Water <strong>Supply</strong> Requirements: Minimum 2 gpm (7.5 liters/min.) from cutting barRecommended 80 psi (5.6 bar) on saw gaugeNoise Level:88 dB at 3 feet (1 meter)Much quieter than gas powered saws!*Bar and chain not included with power head. These items must be purchased separatelyDiamond Chain Saw AccessoriesPart No. Description5802223 Hydraulic Powerhead (including carrying case)5802224 Multi Flow Power Pack6048610 15" Bar6048611 19" Bar6048612 8GPM Hydraulic Flow Adapter Kit6048613 Electric Water Booster Pump Assembly6048631 15" Chain - 33 seg6048632 19" Chain - 39 seg6048633 15" Abrasives Chain - 33 seg6048634 19" Abrasives Chain - 39 seg6048635 15" Premium Chain - 33 seg6048636 19" Premium Chain - 39 seg2600048 18 HP Briggs Vanguard 2 Cylinder Hydraulic Pump*2600184 65 HP Wisconsin V465D Hydraulic Pump*2600117 80 HP John Deere Diesel Hydraulic Pump**Flow on this hydraulic pump must be reduced to 8 gallons per minuteDiamond Products/EmgloWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Emglo<strong>Equipment</strong>COMPRESSORS:Stationary CompressorsWhatever the application–industrial plant air, body shop, tire re-casting,fleet field maintenance, farm, or repair shop–We have just the right compressorfor you. You can select electric-powered single-stage, single-stageduplex, two-stage and two-stage duplex models or gas-drive single-stageor two-stage models. Emglo’s stationary air compressors will meet orexceed your needs.• Electric-Drive: Available with horsepower ratings from 1/2 to 50. Single,two-stage, and duplex units (with two pumps and two motors on onetank) feature Emglo’s legendary dependability and craftsmanship, castironpumps, and intense quality.Emglo electric-drive compressors feature automatic start/stop control,easy start head unloading, vertical tank choices, constant run and dualcontrol options, duplex units, alternators and a deep line of accessories• Gas-Drive: Best in their class! American-assembled, they featurecast-iron pumps, automatic throttle idle control, all brass and copperhardware, a variety of engine choices, and a two-year pump warranty.Horsepower ratings range from 5 to 18 with single-stage or two-stagemodels.• Compressor Pumps: Emglo single and two-stage cast-iron pumps areused worldwide, not only as integral components of our own compressors,but by a multitude of original equipment manufacturers as the preferredair supply in their packages. Applications as diverse as sophisticatedhigh-voltage circuit beakers to maple sugar sap recovery systemsuse Emglo high-quality cast-iron pumps as part of their product offerings.U18HGB-80 Rugged, dependablecast-iron pumps driven by a variety ofgas engines from 5 to 18 HP for avariety of field operations. You namethe requirements... we’ll meet them.W5B-80 This model has it all. An 80-gallonASME-NB tank, heavy-duty 5 HP motor,finned intercoolers, centrifugal unloader,sealed crankcase, automotive-style air filters,magnetic starter, automatic start/stop controls,outlet and drain valves... all standard.2[W5B]-80 Think of this as a safety net ofair compressors. These duplex models willoffer the safety backup you need for criticalair requirements. This unique model is availablein several HP setups and permits largeHP single-phase power installations.STATIONARY ELECTRIC COMPRESSORS:Single-Stage:• Automatic start/stop control is standard: constant run or dual control areoptional• Vertical tank option available on all models at no extra charge• Unloading feature standard on all units to reduce motor starting amperage• Magnetic starter mounted and wired is standard on all 5 HP and largermodels• ASME or ASME-NB tank available if required on 17 and 30-gallon• ASME-NB standard on-60 gallon and larger• A complete line of accessories is available• Two-year pump warrantyTwo-Stage:• Automatic start/stop control is standard, constant run or dual control areoptional• Vertical tank option available on all models through 10 HP at no extracharge• All tanks ASME-NB approved• Magnetic starter standard on 5 HP and larger• Positive acting centrifugal unloader standard on 5 HP and larger– continues –30-1130<strong>Equipment</strong>
30<strong>Equipment</strong>Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Stationary Electric Compressors (continued)• All units are 4-cylinder V-bank design for smooth, balanced operation• A complete line of accessories is available• Two-year pump warrantyDuplex Models:• Two pumps and two motors on one tank• Automatic or manual alternators available• Provides built-in back-up air supply• Permits larger HP units where only single-phase power is available• Many additional duplex models are available – consult our sales dept.Stationary Electric Compressor Specifications:CFM CFM ApproxDISP Delivered Air Ship Dim. (in)Tank 125/150 125/150 Wt.HP Model Gal. PSI PSI PSI (lbs) L W HELECTRIC SINGLE-STAGE - SET 100 TO 125 PSI –150 PSI also available, substitute “E” for “A” in model number1/2 F12A-17 17 125 3.4/2.9 2.2/1.6 135 37 14 253/4 F34A-17 17 125 5.3/4.7 3.1/2.3 140 37 14 253/4 F34A-30 30 125 5.3/4.7 3.1/2.3 160 38 16 311 K1A-30 30 125 6.2/5.7 4.0/3.1 190 38 16 341-1/2 K15A-30 30 125 9.8/9.7 6.2/5.8 205 38 16 241-1/2 K15A-60 60 125 9.8/9.7 8.0/7.0 315 49 20 392 K2A-30 30 125 13.1/12.0 9.1/7.9 205 38 16 342 K2A-60 60 125 13.1/12.0 8.0/7.0 315 49 20 392 GC2A-30 30 125 13.1/12.4 9.1/7.9 270 38 16 362 GC2A-60 60 125 13.1/12.4 9.1/7.9 370 49 20 413 GC3A-30 30 125 21.1/19.9 14.0/12.3 288 38 16 363 GC3A-60 60 125 21.1/19.9 14.0/12.3 388 49 20 415 GC5A-60 60 125 27.8/24.6 17.8/15.0 410 49 20 415 GC5A-80 80 125 27.8/24.6 17.8/15.0 450 62 20 415 J5A-60 60 125 28.7/28.6 19.0/18.0 570 49 23 435 J5A-80 80 125 28.7/28.6 19.0/18.0 610 63 23 43ELECTRIC TWO-STAGE - SET 145 TO 175 PSI –125 PSI also available, substitute “A” for “B” in model number1-1/2 GT15B-60 60 175 8.4/7.2 6.9/5.6 365 49 23 401-1/2 GT15B-80 80 175 8.4/7.2 6.9/5.6 470 63 23 402 GT2B-60 60 175 10.5/9.1 8.5/7.1 370 49 23 412 GT2B-80 80 175 10.5/9.1 8.5/7.1 410 63 23 413 GT3B-60 60 175 15.8/13.4 12.8/10.7 417 49 23 413 GT3B-80 80 175 15.8/13.4 12.8/10.7 457 63 23 413 W3B-60 60 175 16.3/12.2 13.7/10.7 545 49 23 433 W3B-80 80 175 16.3/12.2 13.7/10.7 585 63 23 435 GT5B-60 60 175 21.0/18.3 17.0/15.2 400 49 23 405 GT5B-80 80 175 21.0/18.3 17.0/15.2 515 63 23 405 GT5B-120 120 175 21.0/18.3 17.0/15.2 635 69 25 465 W5B-60 60 175 23.0/21.1 19.0/17.5 570 49 23 435 W5B-80 80 175 23.0/21.1 19.0/17.5 610 63 23 435 W5B-120 120 175 23.0/21.1 19.0/17.5 735 69 25 497-1/2 U75B-80 80 175 40.0/38.0 31.0/27.2 805 63 24 467-1/2 U75B-120 120 175 40.0/38.0 31.0/27.2 930 69 25 5210 U10B-80 80 175 49.8/43.6 39.5/35.2 840 63 24 4610 U10B-120 120 175 49.8/43.6 39.5/35.2 965 69 25 5215 T15B-120 120 175 81.8/72.4 64.0/56.6 1470 69 34 6515 T15B-240 240 175 81.8/72.4 64.0/56.6 1770 90 34 7020 T20B-120 120 175 102.4/92.6 80.1/72.2 1510 69 34 6520 T20B-240 240 175 102.4/92.6 80.1/72.2 1810 90 34 7025 T25B-120 120 175 107.0/107.0 86.8/83.0 1590 69 34 6525 T25B-240 240 175 107.0/107.0 86.8/83.0 1890 90 34 70DUPLEX AUTOMATIC START/STOP CONTROLSINGLE-STAGE - SET 100 TO 125 PSI -150 PSI also available, substitute “E” for “A” in model number3 2(K15A)-60 60 125 19.6/19.4 12.4/11.6 420 49 24 3910 2(GC5A)-80 80 125 55.6/49.2 35.6/30.0 670 65 24 42DUPLEX AUTOMATIC START/STOP CONTROLTWO-STAGE - SET 145 TO 175 PSI -125 PSI also available, substitute “A” for “B” in model number10 2(GT5B)-120 120 175 42.0/36.6 34.0/30.4 920 71 25 4610 2(W5B)-120 120 175 47.8/42.4 38.0/35.0 1045 77 31 4920 2(U10B)-120 120 175 99.6/87.2 79.0/70.4 1420 85 33 5220 2(U10B)-240 240 175 99.6/87.2 79.0/70.4 1720 88 33 5650 2(T25B)-240 240 175 214.0/214.0 173.6/166.0 3000 115 35 70Emglo<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337STATIONARY GAS COMPRESSORSSingle-Stage:• Automatic throttle idle control and intake valve unloaders standard• 30-gallon tanks are standard code except J models which are ASME.ASME and ASME-NB are optional• A complete line of accessories is available• Two year pump warrantyTwo-Stage:• Automatic throttle idle control standard• Centrifugal unloader as well as either intake or discharge unloaderstandard• All tanks ASME-NB• All units are 4 cylinder V-bank design for smooth, balanced operation• A complete line of accessories available• Two-year pump warrantyStationary Gas Compressor Specifications:CFM CFM ApproxEngine DISP Delivered Air Ship Dim. (in)Brand Tank 125/150 125/150 Wt.HP Model (Gas) Gal. PSI PSI PSI (lbs) L W HGAS SINGLE-STAGE - SET 110 TO 125 PSI –150 PSI also available, substitute “E” for “A” in model number5 K5IGA-30 Intek 30 125 14.2/13.8 8.6/7.9 210 39 16 335 K5KGA-30 Kohler 30 125 14.2/13.8 8.6/7.9 210 39 16 335 K5HGA-30 Honda 30 125 14.2/13.8 8.6/7.9 210 39 16 338 GC8GA-30 Briggs 30 125 24.6/24.4 16.0/14.9 297 39 16 368 GC8HGA-30 Honda 30 125 24.6/24.4 16.0/14.9 297 39 16 3611 GC11GA-30 Briggs 30 125 28.6/28.3 18.3/17.3 335 45 17 3711 GC11KGA-30 Kohler 30 125 28.6/28.3 18.3/17.3 335 45 17 3711 GC11HGA-30 Honda 30 125 28.6/28.3 18.3/17.3 335 45 17 3711 J11GA-30 Briggs 30 125 31.8/31.8 20.9/19.8 385 47 21 3911 J11KGA-30 Kohler 30 125 31.8/31.8 20.9/19.8 385 47 21 3911 J11HGA-30 Honda 30 125 31.8/31.8 20.9/19.8 385 47 21 39GAS TWO-STAGE - SET 145 TO 175 PSI –125 PSI also available, substitute “A” for “B” in model number5 GT5IGB-30 Intek 30 175 14.2/13.8 8.6/7.9 210 41 16 335 GT5KGB-30 Kohler 30 175 14.2/13.8 8.6/7.9 210 41 16 335 GT5HGB-30 Honda 30 175 14.2/13.8 8.6/7.9 210 41 16 338 GT8GB-30 Briggs 30 175 24.6/24.4 16.0/14.9 297 41 16 368 GT8HGB-30 Honda 30 175 24.6/24.4 16.0/14.9 297 41 16 3611 GT11GB-30 Briggs 30 175 28.6/28.3 18.3/17.3 335 47 17 3711 GT11KGB-30 Kohler 30 175 28.6/28.3 18.3/17.3 335 47 17 3711 GT11HGB-30 Honda 30 175 28.6/28.3 18.3/17.3 335 47 17 3711 W11GB-30 Briggs 30 175 24.1/21.3 19.8/17.6 385 47 21 3911 W11GB-60 Briggs 60 175 24.1/21.3 19.8/17.6 485 47 23 4311 W11KGB-30 Kohler 30 175 24.1/21.3 19.8/17.6 385 47 21 3911 W11KGB-60 Kohler 60 175 24.1/21.3 19.8/17.3 485 47 23 4311 W11HGB-30 Honda 30 175 24.1/21.3 19.8/17.6 385 47 21 3911 W11HGB-60 Honda 60 175 24.1/21.3 19.8/17.6 485 47 23 4318 U18KGB-80 Kohler 80 175 49.8/43.0 39.5/34.7 1000 63 24 4618 U18HGB-80 Honda 80 175 49.8/43.0 39.5/34.7 1000 63 24 46Base Mounted Compressors• Many models compressors are available mounted on a steel baseplate frame, please contact sales dept. for models and detailsCompressor Pumps• Emglo’s line of bare pumps may be purchased separately,please contact sales dept.HP Range No. Max. Approx. ShipModel Electric Cyc. Bore Stroke PSI Wt. (lbs)Single-StageF & FU 1/3 - 1 1 2-1/2 1-3/4 150 36K & KU 1 - 2 2 2-1/2 2 150 50MG & MGU 2 - 3 4 2-1/2 2-3/8 150 85GC & GCU 2 - 5 4 2-1/2 2-3/8 150 110J & JU 3 - 5 4 2-1/2 3-1/4 150 175Two-StageGT & GTU 1-1/2 - 5 4 2-1/2 (3) - 2-1/2 2-3/8 200 110W & WU 3 - 5 4 2-1/2 (3) - 2-1/2 3-1/4 200 175R 5 2 4-3/4 x 2-1/2 4 200 265U 7-1/2 - 10 4 4-3/4 x 2-1/2 3 200 340T 15 - 25 4 5-1/2 x 3 5 200 750<strong>Equipment</strong>30-12WWW.HANESSUPPLY.COM
Wheeled Portable CompressorsThese wheeled portable air compressors areexceptionally dependable and durable, with legendaryEmglo performance that comes fromquality craftsmanship. They are available in ratingsfrom 1 to 5 HP electric and 5 to 18 HPgas-drive. Emglo designs, manufacturers, andtest commercial-grade wheeled portable compressorsto meet the rigorous demands of theconstruction industry.All Wheeled Portable Compressors Feature:• True Portability: Low-profile design minimizesoperator strain and permits maximum maneuverability.Emglo portables are easy to move.• Tank Options: Emglo portables are availablein the standard 8P (8-gallon twin-tank design)and 17P (larger 17-gallon, 2-wheeled design)versions with some models available asMaster Series units. (30-gallon Specialty unitsmay also be ordered.)• Design, Manufacturing and Testing: Emglo’scustomers rely on our attention to detail andcommitment to continuous quality improvement.Emglo compressors are engineeredfrom the ground up to slash your downtime• Reliability: Skillfully machined, precisionhoned,perfectly finished parts make Emgloportables reliable.• Durability and Dependability: Rugged ductilecast-iron construction ensures longer lifeand lower maintenance.• Efficiency: Uniquely designed disc valves havevalve plate seats lapped and polished to exactspecifications to deliver maximum air output.Wheeled Portable Compressor SpecificationsBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229EmgloMaster Series models include an innovative aircontrol panel that puts the air regulator, tank,and regulator gauges in a convenient location.All Master Series units have two universalquick couplers as standard equipment. Otherfeatures include heavier deck plates and animproved belt guard design. The Master SeriesMG model has a braided discharge tube, areinforced tank assembly and a protected intercoolertube and manifold. All electric modelsinclude dual control.Electric: Every electric wheeled portablethrough 3 HP is equipped with thermal overload-protectedmotors that incorporate an automaticreset switch. An optional dual voltageswitch (115/230V) is available on all but the 3HP model. Optional dual control permits easyswitching from stop-start to continuous operation.Standard equipment includes tank regulatorand gauge, heavy-duty cord set, safetyvalve, screw-in inlet filter, improved tank drainvalve, and larger discharge ports on the pump.Gas: For gas-drive units Emglo has a widechoice. We offer Briggs, Intek, Kohler, andHonda engines choices. All models includeautomatic throttle idle control to reduce wearand save fuel when the compressor is not underload. Both standard and Master Series modelsare available. All models include regulator andgauge, safety valve, screw in inlet filter andimproved tank drain valve.CFM DISP CFM Delivered Air Approx. Dim. (in)125 40 100 125/175 ShipHP Model Drive Tank Gal. PSI PSI PSI PSI PSI Wt. (lbs) L W HMASTER SERIES ELECTRIC Dual Control – Set 110 to 125 PSI1.5 MK15A-8P Electric 5 128 9.8 7.2 6.5 6.2/- 185 43 19 232 MK2A-8P Electric 8 125 13.1 9.3 8.4 8.0/- 195 43 19 233 MG3A-8P Electric 8 125 20.5 15.8 13.8 13.5/- 250 43 19 25MASTER SERIES GAS Constant-Run Control – Set 110 to 125 PSI5 MK5HGA-8P Gas/Honda 8 125 14.2 9.8 8.9 8.6/- 185 43 19 258 MG8HGA-8P Gas/Honda 8 125 24.0 18.1 16.2 15.6/- 240 43 19 27ELECTRIC Constant-Run Control – Set 110 to 125 PSI1 K1A-8P Electric 8 125 6.4 4.9 4.2 4.0/- 160 43 19 231 K1A-17P Electric 17 125 6.4 4.9 4.2 4.0/- 190 44 21 281.5 K15A-8P Electric 8 125 9.8 7.2 6.5 6.2/- 175 43 19 231.5 K15A-17P Electric 17 125 9.8 7.2 6.5 6.2/- 205 44 21 282 K2A-8P Electric 8 125 13.1 9.3 8.4 8.0/- 190 43 19 232 K2A-17P Electric 17 125 13.1 9.3 8.4 8.0/- 220 44 21 283 G0A-8P Electric 8 125 20.5 15.8 13.8 13.5/- 240 43 19 253 G3A-17P Electric 17 125 20.5 15.8 13.8 13.5/- 270 44 21 305 G5A-8P Electric 8 125 27.8 20.8 18.3 17.8/- 262 43 19 265 G5A-17P Electric 17 125 27.8 20.8 18.3 17.8/- 292 44 21 30ELECTRIC Two-Stage Wheeled Portables, Constant-Run Control – Set 145 to 175 PSI5 GT5B-8P2† Electric 8 175 18.8 15.8 15.5 -/15.2 302 44 23 275 GT5B-17P Electric 17 175 18.8 15.8 15.5 -/15.2 332 44 21 30GAS Constant-Run Control – Set 110 to 125 PSI5 K5IGA-8P Gas/Intek 8 125 14.2 9.8 8.9 8.6/- 165 43 19 255 K5IGA-17P Gas/Intek 17 125 14.2 9.8 8.9 8.6/- 195 44 21 305 K5KGA-8P Gas/Kohler 8 125 14.2 9.8 8.9 8.6/- 185 43 19 265 K5KGA-17P Gas/Kohler 17 125 14.2 9.8 8.9 8.6/- 205 44 21 315 K5HGA-8P Gas/Honda 8 125 14.2 9.8 8.9 8.6/- 175 43 19 265 K5HGA-17P Gas/Honda 17 125 14.2 9.8 8.9 8.6/- 195 44 21 318 G8GA-8P Gas/Briggs 8 125 24.0 18.1 16.2 15.6/- 210 43 19 278 G8GA-17P Gas/Briggs 17 125 24.0 18.1 16.2 15.6/- 240 44 21 328 G8HGA-8P Gas/Honda 8 125 24.0 18.1 16.2 15.6/- 210 43 19 278 G8HGA-17P Gas/Honda 17 125 24.0 18.1 16.2 15.6/- 240 44 21 32GAS Two-Stage Wheeled Portables, Constant-Run Control – Set 145 to 175 PSI8 GT8GB-8P2† Gas/Briggs 8 175 19.2 16.0 15.7 -/15.4 260 44 23 298 GT8GB-17P Gas/Briggs 17 175 19.2 16.0 15.7 -/15.4 290 44 21 328 GT8HGB-8P2† Gas/Honda 8 175 19.2 16.0 15.7 -/15.4 260 44 23 298 GT8HGB-17P Gas/Honda 17 175 19.2 16.0 15.7 -/15.4 290 44 21 32† 8 gallon tank with 2 wheels<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>Electric Portables:• 3/8" air line regulator and mounting bracketstandard• CSA approval available on some models –may require options• 1 through 2 HP connected 115-volt unlessspecified• 3 and 5 HP connected 230-volt only• Optional dual voltage switch available on 1,1-1/2, and 2 HP models• Optional start/stop & dual control available(standard on Master series), except 5 HP• All models are oil-lubricated and set at 125PSI• Optional 30-gallon tank availableGas Portables:• Recoil start standard, Electric start optionalon some models• Optional 30-gallon tank available• Automatic throttle idle control wear to savefuel when not under load is standardTwo-Stage Portables:• Constant-run control• 3/8" air line regulator and mounting bracketstandard• 17-gallon tank ASMEAccessories:• Air-line filters, lubricators, air hoses• Adapters for mounting specialty couplersMK5HGA-8P Looking for important features? This 5 HPMaster Series has an integrated control panel with regulator,gauges and two universal quick couplers.K15A-8P With optional 115/230 dual-voltage switch, thefirst in its class and an often-copied icon, this twin-tank,single-wheeled unit is ready to handle tough tasks.MG8HGA-8P “We build it better and more durable thanit has to be.” That's what Emglo engineers say. Its hardyfeatures include a heavier deck plate, improved beltguard, larger discharge on the pump and braided dischargetube.30WWW.HANESSUPPLY.COM30-13<strong>Equipment</strong>
<strong>Equipment</strong>Large Portable CompressorsHeavy Duty Portables• 11 HP engine includes electric start with batterybox and cables (battery not included)• Electric models 230 volt with thermal overload• ASME-NB standard on 30-gallon models• ASME code not applicable on HDP models(6" diameter)• Extra large pneumatic tires on 30P models• Lifting bail available• Diesel option availablePortable Trailer• 11 & 18 HP engines include electric start withbattery box and cables (battery not included)• 8 HP recoil start – electric start optional• Electric models 230 volt with thermal overload• 30-gallon ASME tank standard. ASME-NBOptionalSkid-Mount• 11 & 18 HP engines include electric start (batterybox & battery not included) consult salesdept. for optional add on• 8 HP recoil start – electric start optional• Diesel option available• 30-gallon ASME tank standard. ASME-NBOptionalBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Emglo<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337CFM DISP CFM Delivered Air Approx. Dim. (in)Tank 125 40 100 125/175 ShipHP Model Drive Gal. PSI PSI PSI PSI PSI Wt. (lbs) L W HELECTRIC Heavy-Duty Portables5 J5A-HDP Electric 8 125 28.7 21.5 19.4 19.0/- 427 66 24 325 W5B-HDP Electric 8 175 21.6 18.3 18.1 -/17.9 415 66 24 325 W5B-30P Electric 30 175 21.6 18.3 18.1 -/17.9 645 59 28 40GAS Heavy-Duty Portables11 J11GA-HDP Gas/Briggs 8 125 31.8 23.5 21.3 20.9/- 432 66 24 3211 J11GA-30P Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 625 59 28 4011 J11KGA-HDP Gas/Kohler 8 125 31.8 23.5 21.3 20.9/- 453 66 24 3211 J11KGA-30P Gas/Kohler 30 125 31.8 23.5 21.3 20.9/- 680 59 28 4011 J11HGA-HDP Gas/Honda 8 125 31.8 23.5 21.3 20.9/- 420 66 24 3211 J11HGA-30P Gas/Honda 30 125 31.8 23.5 21.3 20.9/- 620 59 28 4011 W11GB-HDP Gas/Briggs 8 175 21.1 18.0 17.8 -/17.6 432 66 24 3211 W11GB-30P Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 625 59 28 4011 W11KGB-HDP Gas/Kohler 8 175 21.1 18.0 17.8 -/17.6 453 66 24 3211 W11KGB-30P Gas/Kohler 30 175 21.1 18.0 17.8 -/17.6 680 59 28 4011 W11HGB-HDP Gas/Honda 8 175 21.1 18.0 17.8 -/17.6 420 66 24 3211 W11HGB-30P Gas/Honda 30 175 21.1 18.0 17.8 -/17.6 620 59 28 40ELECTRIC Portables Trailer5 GC5A-PT Electric 30 125 27.8 20.8 18.3 17.8/- 694 71 58 375 J5A-PT Electric 30 125 28.7 21.5 19.4 19.0/- 714 71 58 385 W5B-PT Electric 30 175 21.6 18.3 18.1 -/17.9 714 71 58 38GAS Portable Trailer8 GC8GA-PT Gas/Briggs 30 125 24.6 18.6 16.4 16.0/- 560 71 58 3711 J11GA-PT Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 700 71 58 3811 W11GB-PT Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 700 71 58 3818 U18VGB-PT Gas/Briggs 30 175 43.0 35.4 35.1 -/34.7 904 78 68 3918 U18KGB-PT Gas/Kohler 30 175 43.0 35.4 35.1 -/34.7 920 78 68 3918 U18HGB-PT Gas/Honda 30 175 43.0 35.4 35.1 -/34.7 888 78 68 39GAS Skid Mount8 GC8GA-SM Gas/Briggs 30 125 24.6 18.6 16.4 16.0/- 455 38 36 238 GC8KGA-SM Gas/Kohler 30 125 24.6 18.6 16.4 16.0/- 485 38 36 238 GC8HGA-SM Gas/Honda 30 125 24.6 18.6 16.4 16.0/- 463 38 36 2311 J11GA-SM Gas/Briggs 30 125 31.8 23.5 21.3 20.9/- 490 38 36 2511 J11KGA-SM Gas/Kohler 30 125 31.8 23.5 21.3 20.9/- 520 38 36 2511 J11HGA-SM Gas/Honda 30 125 31.8 23.5 21.3 20.9/- 488 38 36 2511 W11GB-SM Gas/Briggs 30 175 21.1 18.0 17.8 -/17.6 490 38 36 2511 W11KGB-SM Gas/Kohler 30 175 21.1 18.0 17.8 -/17.6 520 38 36 2511 W11HGB-SM Gas/Honda 30 175 21.1 18.0 17.8 -/17.6 488 38 36 2518 U18VGB-SM Gas/Briggs 30 175 43.0 35.4 35.1 -/34.7 694 41 48 2718 U18KGB-SM Gas/Kohler 30 175 43.0 35.4 35.1 -/34.7 710 41 48 2718 U18HGB-SM Gas/Honda 30 175 43.0 35.4 35.1 -/34.7 678 41 48 2730<strong>Equipment</strong>Hand-Carry CompressorsIf your job site makes the use of a wheeled orstationary compressor impractical, Emglo’shand-carry compressors are the solution.Emglo Master Series and Air-Mate direct drivehand-carry compressors are available in eitherelectric or gas-drive models, in ratings from 1 to2-1/2 HP electric and 4 HP gas. Tank configurationsinclude the popular, original twin-stackedtank or the lighter-weight single-tank version.They feature the dependably, reliability, andinnovation you expect from The Authentic Blue.Emglo Master Series hand-carry compressorscombine the superior performance standards ofthe Air-Mate with an innovative air control panel.They feature larger gauges and universal quickcouplers. Master Series hand-carry models areoil-lubricated, and Air-Mate models are availablelubricated or oil-free.Electric: From interior trim and finish to heavierconstruction applications, Air-Mate or MasterSeries Hand-Carry will do the job. Electric modelsdeliver 2.6 to 5.6 cfm, thermal overload protectionwith manual resets and special unloadingvalves for motor starting. Several tank configurationsplus oil-free versions are available.All models can be purchased in the standardAIr-Mate version, with many also available asMaster Series models.– continues –30-14Gas: For a hand-carry compressor when electricpower is nonexistent, rely on Emglo’s gasdriveAir-Mates and Master Series models.Emglo’s innovative gasoline-powered compressorsuse a uniquely balanced direct couplingand a special anti-vibration mechanism toimprove performance. All models include auto-AM780-HC4V This is it–theindustry standard for stacked airtanks. This 2 HP model delivers4.1 cfm at 100 psi! It may be lightweight,but does it pack a punchWWW.HANESSUPPLY.COMAM700-HC4V It’s innovative andaffordably priced, too. This modelmay be the most exceptionalvalue on the market. Even thoughit's 2 HP rated, it draws less than13.5 amps!matic throttle idle control to reduce wear andsave fuel when the compressor is not underload. Gas-powered hand-carry units by Emglooutperform and outlast competing units. Allmodels produce 4.4 cfm delivered air at 100 PSIand are available in Air-Mate and Master Seriesversions.M790-HC4V Here’s traditionalAir-Mate quality with enhancedfeatures for improved ease of use.It includes an integrated air controlpanel with regulator, largegauges, and two universal quickcouplers
Hand-Carry Compressors (continued)Hand-Carry Portables• Automatic start stop control with easy starthead unloading standard on all electric models• Automatic throttle idle control standard on allgas models• Air line regulators and gauge standard on allmodels – Master Series features an integratedair control panel which includes two universalquick couplersNotes* 20-AMp breaker required+ Lower amperage draw other than 2 HP units^ Features a cast-iron cylinderBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Emglo/Heck Industries, <strong>Inc</strong>.<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>CFM DISP CFM Delivered Air Approx. Dim. (in)Tank 125 40 100 125/175 ShipHP Model Drive Gal. PSI PSI PSI PSI PSI Wt. (lbs) L W HMASTER SERIES ELECTRIC Start-Stop Control – Set 110 to 125 PSI1 M400-HC4V^ Electric 4 125 3.9 3.1 2.6 2.4 57 18 15 162 M790-HV4V^ Electric 4 125 7.7 5.1 4.1 3.6 62 18 15 162.5 M990-HC4V^ Electric 4 125 10.1 7.6 5.6 5.2 69 18 21 17MASTER SERIES GAS Constant-Run Control – Set 110 to 125 PSI4 M840-4HG-HC4V Honda 4 125 8.3 6.1 4.7 4.4 70 18 21 17AIR-MATE ELECTRIC Start-Stop Control – Set 100 to 125 PSI1 AM390-HC2^ Electric 1.5 125 3.9 3.1 2.6 2.4 45 18 13 141 AM390-HC4V^ Electric 4 125 3.9 3.1 2.6 2.4 56 18 15 162 AM700-HC4V+ Electric 4 125 6.9 4.5 3.2 3.1 49 18 15 162 AM780-HC2^ Electric 4 125 7.7 5.1 4.1 3.6 60 18 15 162 AM780-HC4V^ Electric 4 125 7.7 5.1 4.1 3.6 60 18 15 162.5 AM990-HC4V Electric 4 125 10.1 7.6 5.6 5.2 69 18 21 17AIR-MATE GAS Constant-Run Control – Set 110 to 125 PSI4 AM840-4HG-HC4V Honda 4 125 8.3 6.1 4.7 4.4 67 18 21 17AIR-MATE OIL-LESS ELECTRIC Start-Stop Control – Set 95 to 120 PSI2 AMDOL780-HC2 Electric 1.5 120 7.8 5.0 3.7 3.2 38 16 15 152 AMDOL780-HC4V Electric 4 120 7.8 5.0 3.7 3.2 52 18 16 16Heck Industries, <strong>Inc</strong>.BEVEL-MILL ®Model 4000• Double Insulated• Adjustable handle positions forcomfortable operation• Trigger operation with lock• Specially designed gear drive motors• Variable speed control (optional)Model 7000A more effective method of beveling.• Eliminates slow grinding• No fumes - heat - smoke• No vibrationUsing standardV-Block roller guides,rounds and pipecan be worked 6"(2.7mm) or larger.Model 8000• Ideal for weld preparation• Works plate and structural steel as thinas 3/16" for clean burr-free edges• Variable angle 15° - 45°• Adjustable depth of cut• Works most materials machinable withcarbide such as mild steel, aluminumand stainless steel• Self supporting on the work piece• Can be inverted to work the lower edgeof plates• Specifically designed heavy duty motor• Using optional cutter head, radius edges can be made easily• V-block design assures consistent edge qualityBB27 Bench BevelerPrecision Finish Chamfers• Chamfer or deburr any material fromplastic to hardened steel• Ideal for finish chamfers or machinedparts• One pass debuurring or chamfering• Easily adjustable depth of cutHeavy-duty construction featuring:• Cast frame• Hardened and ground back plate• Ground table• Works parts as thin as 3/16"VA-400• Deburr - Chamfer edges easily• Adjustable angle 15 0 - 45 0• Uses standard carbide inserts• Adjustable depth of cut• Use on any steel or aluminum• Simple to operate• No set-up required• Corner rounding with radius insertsMin.Workpiece Bevel V-blockThickness Min. Max. Angle Length No. of Wt.Model (in) Bevel Bevel (degrees) (in) Insets Motor (lbs)4000 1/8 0 3/4 15-45 8-3/4 10 2hp 110V 2250/60 Hz7000 1/8 0 3/8 15-45 8 5 1/2hp 110V 268000 1/8 0 7/8 15-45 8 10 1hp 110V 369000 1/8 0 1-1/4 15-45 8-3/4 10 1-1/2hp 110V 50BB27 3/16 0 3/16 fixed 45 12 flap disk 1/2hp 110V 65VA-400 1/16 0 3/16 15/45 19-1/2 6 1hp 110V 59Patent #s 5,522,684 and 5,423,642, others pendingModel 9000• World’s most powerful plate beveler• Faster feed rates• Comfortable cushioned handles• Uses 5/8" square carbide inserts30WWW.HANESSUPPLY.COM30-15<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>Turbo-Burr ®• Easily brought to the work site• For use as both a hand and bench tool• Puts a safety edge on sheet metal inone pass• Breaks sharp edges on parts at mill,saw or shearPerfect for deburring and edge finishing of:– Ferrous and non-ferrous metals– Plastics– Stainless steel– Aluminum– Laminates– Printed circuit boardsHomeliteGENERATORSModel CG 4800UT No. 03762• 8 HP Honda OHV engine• Large 7.5 gal. fuel tank• Run time - 11 hrs. per tank of fuel at full load• Automatic idle control to increase fuel economyand extend engine life• Outlets - two 15A 120V (5-15R)- one 20A 120V (L5-20R)- one 30A 120V (L5-30R)- one 20A 120V/240V (L14-20R)• Solid-state voltage regulation 2%• Vibration isolation mounts for extra long life• Protective roll cage*30-16Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Two Models:Model S With closed bottom “V” block.Suitable for most applications.Model R With a small gap at the bottom of the “V”block. Suitable for materials 0.135 inchesand heavier, where large burrs are present.Rotation Speed: 55,000 rpm (no load speed)Air Consumption: 5 to 11 cfm-lubrication not neededAir pressure: 60 to 120psiAir Hose: 1/4 inchMin. Material Thickness: .015 inchCollet: 1/4 inch - compression typeBurr Type: 1/4 in. dia. x 2 in. lengthoverall-solid carbideDepth of Bevel: 0 to .075 in. at 45°Feed Speeds: up to 2 in. per secondWeight: 3.5 lbs.Beveling Table• Beveling angles infinitely adjustable from 25-90 degrees• Beveling fixture constructed of sturdy anodized aluminum, work table ofprecision ground steel• Micrometer type depth adjustmentallows for precise set-up andoperation• Dual exhaust manifoldFor beveling and edge finishing of:– Printed circuit boards– Plastics– Connector finger tips– Wood– CompositesRotation Speed: 55,000 rpm (no load speed)Air Consumption: 5 to 11 cfm-lubrication not neededAir pressure: 60 to 120psiAir Hose: 1/4 in.Max Material: 1/2 in. thick at 900Collet: 1/4 in. - compression typeBurr Type: 1/4 in. dia. x 2 in. lengthoverall-solid carbideDepth of Bevel: 0 to 1/2 in. at 45° multiple passesFeed Speeds: up to 2 in. per secondTable size: 8-3/4 in. deep x 16 in. longDim. (L x W x H): 16 x 17 x 8-3/4 in.Weight: 35 lbs.WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Heck Industries, <strong>Inc</strong>./HomeliteHY-CYCLE GENERATORModel CHY 5000UT No. 03772• 11 HP Honda engine• Large 7.5 gal. fuel tank• Run time - 9 hrs. per tank of fuel at full load• Automatic idle control to increase fuel economyand extend engine life• Vibration isolation mounts for extra long life• Protective roll cage*Model CG 6300UT No. 03763• 11 HP Honda OHV engine• Large 7.5 gal. fuel tank• Run time - 9 hrs. per tank of fuel at full load• Automatic idle control• Full power 120 volt switch• Outlets - two 15A 120V (GFCI)- one 20A 120V (L5-20R)- one 30A 120V (L5-30R)- one 20A 120V/240V (L14-20R)• Solid-state voltage regulation 2%• Vibration isolation mounts for extra long life• Protective roll cage*Model CGE 6300UT No. 03764• 11 HP Honda OHV engine• Large 7.5 gal. fuel tank• Run time - 9 hrs. per tank of fuel at full load• Automatic idle control• Full power 120 volt switch• Outlets - two 15A 120V (GFCI)- one 20A 120V (L5-20R)- one 30A 120V (L5-30R)- one 20A 120V/240V (L14-20R)• Solid-state voltage regulation 2%• Electric key start• Protective roll cage*Generator Specifications:Model CG 4800 CG 6300 CGE 6300 CHY 5000UT No. 03762 03763 03764 03772Watts (Int.) 4800 6300 6300 –Watts (Cont.) 4000 5000 5000 5000Volts AC 120/240 120/240 120/240 230Amps AC 120/240 33.3/16.6 41.6/20.8 41.6/20.8 12.6CPS (Hz) 60 60 60 180Low Oil shut-Off YES YES YES YESHP @ 3600 RPM 8 11 11 11Run Time/ 11 hrs./ 9 hrs./ 9 hrs./ 9 hrs./Tank Size 7.5 gals. 7.5 gal. 7.5 gals. 7.5 gsls.Voltage Regulation +/-2% +/-2% +/-2% InherentIdle Ctrl. Std. Std. Std. Std.Net Wt. (lbs) 158 177 205 194CENTRIFUGAL PUMPSModel 111 S2UT No. 01532• Briggs & Stratton 3.5 HP, 1/P 4-cycle engine• Pumps 9,000 GPH (34,000 L/hr.)• Total head - up to 110 ft. (33.5m)• Priming Lift - 25 ft. (8.5m) at sea level• Open type abrasion resistant iron impeller• Abrasion resistant cast iron impeller housing• 2" suction and discharge• Protective roll cage with rubber feet*
Model HCP 420UT No. 01609• Honda 4 HP, 4-cycle engine• 2" (5 cm) suction and discharge• Pumps 9,225 GPH (34,920 L/hr.)• Total head - 92 ft. (28 m)• Priming lift - 25 ft. (7.6 m) at sea level• Abrasion resistant cast iron impeller• Protective roll cage*• Silicon carbide sealModel 120 S3UT No. 01535• Briggs & Stratton I/P 8 HP engine• Pumps 17,600 GPH (66,620 L/hr.)• Total head - up to 113 ft. (34.4m)• Priming Lift - 25 ft.(7.6m) at sea level• Open type abrasion resistant cast ironimpeller• Abrasion resistant cast iron impeller housing• 3" suction and discharge• Protective roll cage*• Vibration isolationModel HCP 630UT No. 01610• Honda 5.5 HP, 4-cycle engine• 3" (7.6 cm) suction and discharge• Pumps 15,915 GPH (60,240 L/hr.)• Total head - 92 ft. (28 m)• Priming lift - 25 ft. (7.6 m) at sea level• Abrasion resistant cast iron impeller• Protective roll cage*• Silicon carbide seal* Dolly kit optionCentrifugal Pump Specifications:Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Model 111 S2 120 S3 HCP 420 HCP 630UT No. 01532 01535 01609 01610Suc./Dis. Size (in) 2 3 2 3Capacity GPH/ 9,000 17,600 9,225 15,915(L/hr.) (34,000) (66,620) (34,920) L/hr (60,240)L/hrTotal Head (ft) 110 113 92 92Priming Time inSec @ 25 ft. Lift 84 88 240 287Engine Briggs & Stratton Briggs & StrattonI/P 4-cycle I/P 4-cycle Honda OHV Honda OHVHP 3.5 8 4 5.5Low Oil Shut-Off N/A Yes Yes YesRun Time 1 hr. 1.5 hrs. 2.3 hrs. 2 hrs.Net Weight- (lbs) 60 110 46.5 59.4TRASH PUMPSModel 121 TP2UT No. 01540• Briggs & Stratton 5 HP, 1/P 4-cycle engine• Pumps 10,400 GPH (39,300 L/hr.)• Priming Lift - 25 ft.(7.6m) at sea level• Open type abrasion resistant cast iron impeller• Abrasion resistant cast iron impeller housing• 2" suction and discharge• Handles 1" solids• Protective roll cage with rubber feet*Model 120 TP3UT No. 01537• Briggs & Stratton 8 HP, I/P 4-cycle engine• Pumps 19,680 GPH (74,500 L/hr.)• Priming lift - 25 ft. (7.6 m) at sea level• Open type abrasion resistant cast ironimpeller• Abrasion resistant cast iron impeller housing• 3" suction and discharge• Handles 1.5” solids• Protective roll cage*• Vibration isolationHomeliteWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Model HTP 2UT No. 01601• Honda 5.5 HP OHV 4-cycle engine• Pumps 10,400 GPH (39,300 L/hr.)• Priming lift - 25 ft. (7.6 m) at sea level• Open type abrasion resistant cast iron impeller• Abrasion resistant cast iron impeller housing• 2" suction and discharge• Handles 1" solids• Protective roll cage with rubber feet*Model HTP 3UT No. 01602• Honda 8 HP OHV 4-cycle engine• Pumps 19,680 GPH (74,500 L/hr.)• Priming lift - 25 ft. (7.6 m) at sea level• Open type abrasion resistant cast iron impeller• Abrasion resistant cast iron impeller housing• 3" suction and discharge• Handles 1.5" solids• Protective roll cage*• Vibration isolationModel VTP 4UT No. 01605• Briggs & Stratton 16 HP Vanguard OHV 4-cycle engine• Pumps 39,720 GPH (150,340 L/hr.)• Priming lift - 25 ft. (8.5 m) at sea level• Open type abrasion resistant iron impeller• Abrasion resistant cast iron impeller housing• 4" suction and discharge• Handles 2" solids• Protective roll cage & dolly standard*Trash Pump Specifications:<strong>Equipment</strong>Model 121 TP2 HTP 2 120 TP3 HTP 3 VTP 4UT No. 01540 01601 01537 01602 01605Suc./Dis. Size (in) 2 3 3 3 4Capacity GPH/ 10,400 10,400 19,680 19,680 39,720(L/hr.) (39,300) (39,300) (74,500) (74,500) (150,340)Total Head (ft) 108 108 93 93 115Priming Time inSec @ 25 ft. Lift 62 62 70 70 80Engine Briggs & Honda Briggs & Honda Briggs &Stratton OHV Stratton OHV StrattonI/P 4-cycle 4-cycle I/P 4-cycle 4-cycle VanguardOHVHP 5 5.5 8 8Low Oil Shut-Off Std. Std. Std. Std. Std.Run Time (hr) 1.68 1.2 1.75 1.85 1.1Net Weight- (lbs) 74 79.5 115 119 350DIAPHRAGM PUMPSModel HDP 2UT No. 01603• Honda 4 HP OHV engine• Pumps 2,000 GPH (7,600 L/hr.)• Total head - up to 50 ft. (15 m)• Priming Lift - 25 ft. (7.6 m) at sea level• 2" suction and discharge• Protective roll cage*Model HDP 3UT No. 01604• Honda 5.5 HP OHV engine• Pumps 4,800 GPH (18,200 L/hr.)• Total head - up to 50 ft. (15 m)• Priming Lift - 25 ft. (7.6 m) at sea level• 3" suction and discharge• Protective roll cage** Dolly kit optional30-1730<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>SUBMERSIBLE PUMPSModel HSM 400UT No. 01319• 1/2 HP high efficiency electric motor• Automatic motor stop-reset• 2" discharge nipple• Wear resistant synthetic rubber impeller• Double mechanical silicon carbide sealfor longer lifeModel HSM 750UT No. 01320• 1 HP high efficiency electric motor• Automatic motor stop-reset• 2" discharge nipple• Wear resistant synthetic rubber impeller• Double mechanical silicon carbide sealfor longer life30-18Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229DIAPHRAGM PUMPSVENTILATING BLOWERSModel 111 B1UT No. 07423• Briggs & Stratton 4-cycle 3.5 HP I/P engine• Cast iron cylinder sleeve• Heavy duty, dual element air cleaner• Variable speed control allows air outputfrom 500 to 1428 CFM• Convenient carrying handle• Weight - 45 Lbs. (20.4kg)• Heavy duty skids with vibration isolated spring mountsModel 200 EBUT No. 07420• Powered by a 2 HP, 120/240 volt 60 Hz.single-phase electric motor• Heavy duty 3 foot cord with NEMAL5-30P plug• Large pan base for stability• Convenient carrying handleVentilating Blower Specifications:Model 111 B1 200 EBUT No. 07423 074201-900 Bend 1170.0 1119.92-900 Bends 1119.9 1074.6CFM Free Air 1427.7 1094.1Engine Briggs & Stratton Electric motorHP 3.5 2Fuel Cap. (qts) 3 N/ARun Time Per Tank (hr) 3.5 N/ANet Weight- (lbs) 45 56Homelite/LeveLite ®SUBMERSIBLE PUMPSModel HDP 2 HDP 3 HSM 400 HSM750UT No. 01603 01604 01319 01320Suc./Dis. Size (in) 2 3 2 3Capacity GPH/ 2,000 4,800 3,240 4,758(L/hr.) (7,600) (18,200) (12,263) (18,033)Total Head (ft) 50 50 39 53.3Priming Time inSec @ 25 ft. Lift 36 61 N/A N/AEngine Honda OHV Honda OHV Electric Electric120 vac 120vacHP 4 5.5 1/2 1Low Oil Shut-Off Yes Yes N/A N/ARun Time (hr) 2.3 2 N/A N/ANet Weight (lbs) 99 140 19.9 28.6WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337LeveLite ®LaserPRO ® 2Self-Leveling/2-Beam (Plumb Up, Plumb Down) Pocket LaserDesigned expressly for PLUMB up/down applications, one person, usingthe NEW Laser PRO 2 TM can transfer a point on the floor to a ceiling up to100 feet high in just seconds. Waiting for aplumb bob to settle is a thing of the past.This automatic self-leveling pocket laseris housed in a durable, job-site tough, rubbercase. 4 common alkaline “AA” cellspower the Laser PRO 2 TMfor up to 40 hoursof use. A standard 1/4-20 socket allows theLaser PRO 2 TMto be used with a variety ofaccessories including the Drywall Stand,Quick Clamp and a photographer’s tripod.Order Size (LxWxH) WeightModel: No: Description (in) (lbs)Laser Pro 2 21240 Self-Leveling Dual Beam Pocket Laser 4-3/8 x 2 x 3-3/4 0.8Further Specifications <strong>Inc</strong>lude:• Self-Leveling Range from Level From +6 to -6 degrees• Working Range: 50' nominal, up to 100' depending on light and wind conditions.• Accuracy: +/- 1/8" at 25 feet for up beam. +/- 1/8" at 1' for down beam.• Operating temperature range: 32-113 O F.• Battery Type: Powered by 4AA alkaline batteries (included).• Battery Life: 40 hours• Diode: 650 nm Class 2 Laser Diode.TriLite ®Self-Leveling/3-Beam (Plumb, Level, Square) Pocket Laser3-beam, automatic, self-leveling pocket laser for PLUMB, LEVEL andSQUARE setups such as laying out foundations, building decks and squaringwalls. One person can instantly form a perfect corner using theTRILITE’s three beams instead of doing it withtwo people and the error prone “3-4-5 triangle”method. All 3 of the tool's laser beams originatefrom a common point (co-planer beams) andhave a common 1" offset from the outside edgeof the tool making the TRILITE one of the easiestto use multi-beam tools that's available today.Simply place the tool over a reference mark, wait3-4 seconds for it to automatically self-level, andmark the positions of the 3 beams. No rememberingconfusing offset factors.Order Size (LxWxH) WeightModel: No: Description (in) (lbs)Tri-Lite 21300 Self-Leveling Three Beam Pocket Laser 4-3/8 x 2 x 3-3/4 0.8Further Specifications <strong>Inc</strong>lude:• Self-Leveling Range from Level: From +4 to -4 degrees• Working Range Working range: 60' nominal, up to 100' depending on light and windconditions.• Accuracy Accuracy: +/- 1/4" at 60 feet• Operating temperature range: 32-113 degrees Fahrenheit (0-45 degrees C)• Battery Type: Powered by 3 AA alkaline batteries (included).• Battery Life: 25-30 hours• Diode: 635 nm Class 2 Laser Diode.SLX ProSelf-Leveling/2-Beam (Level & Plumb) PocketToolHigh-power, automatic, self-leveling pocket laserfor all types of LEVEL and PLUMB setups suchas laying out foundations, building decks andframing.Order Size (LxWxH) WeightModel: No: Description (in) (lbs)SLX-Pro 21209 Self-Leveling tool for fast lavel & plump setups 4-3/8 x 2 x 3-3/4 0.8Further Specifications <strong>Inc</strong>lude:• Self-Leveling Range from Level: From +4 to -4 degrees• Working Range Working range: 60' nominal, up to 100' depending on light and windconditions.• Accuracy Accuracy: +/- 1/4" at 60 feet• Operating temperature range 32-113 degrees Fahrenheit (0-45 degrees Celsius)• Battery Type: Powered by 3 AA alkaline batteries (included).• Battery Life: 25-30 hours• Diode: 635 nm Class IIIa Laser Diode.
SLX2Self-Leveling/2-Beam (Plumb, Level) PocketLaserThe LeveLite SLX2 TMmakes all types of LEVELand PLUMB setups a simple and fast one-manoperation. They can enhance the efficiencyand accuracy of construction professionals,HVAC technicians, electricians, riggers andfactory maintenance professionals.Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229LeveLite ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Magnetic MountIdeal for mounting your LeveLite to galvanizedduct-work, steel beams, conduit, iron pipe, anythingcompatible with this powerful magnet.Built in 1/4-20 mount. Use with Ceiling Mountwhen laying out suspended ceilings.Compatible with LaserPro2, Tri-Lite, SLX Proand SLX2.Order No: 21105<strong>Equipment</strong>Order Size (LxWxH) WeightModel: No: Description (in) (lbs)SLX 2 21200 Self-leveling 2 beam pocket laser 4-3/8 x 2 x 3-3/4 0.8Further Specifications <strong>Inc</strong>lude:• Self-Leveling Range from Level: From +4 to -4 degrees• Working Range: 60' nominal, up to 100' depending on light and wind conditions.• Accuracy: +/- 1/4" at 60 feet• Operating temperature range 32-113 degrees Fahrenheit (0-45 degrees Celsius)• Battery Type: Powered by 3 AA alkaline batteries (included).• Battery Life: 25-30 hours• Diode: 635 nm Class 2 Laser Diode.AccuSquarePrecision Laser Layout Kit 2-Beams at 90 O & 180 O Layout ProtractorAccuSquare. Precision Layout Kit generates precise90 O angles with speed and accuracy, projectinga beam on the floor. Great for fastflooring and tile layouts.Protractor90 O Beam ProjectorOrder Size (LxWxH) WeightModel: No: Description (in) (lbs)AccuSquare 21465 Precision Laser Layout Kit (w/Accu- 17 x 12 x 4-1/8 5.090 O Kit Square laser, Projector, & Protractor)Protractor 21464 AccuSquare Layout Protractor 170 x 7-1/2 x 11/4 0.590 O Beam 21462 AccuSquare Lens Unit 5-3/4 x 3-1/8 x 2-3/4 0.3ProjectorFurther AccuSquareSpecifications <strong>Inc</strong>lude:• Self-Leveling Range from Level N/A• Working Range 50' nominal, up to 100' depending on ambient conditions.• 90 Degree Accuracy 1/4" at 40' (±15 minutes)• Operating temperature range 32-113 degrees Fahrenheit (0-45° C)• Battery Type Powered by 3AA alkaline batteries (included).• Battery Life 25-30 hours• Diode 650 nm Class 3 Laser Diode.Pocket Laser Tool Accessories:Quick ClampSecurely mount your LeveLite tool tobeams, scaffolding, batterboards, almostanything up to 6" across. Built in 1/4-20mount.Compatible with LaserPro2, Tri-Lite, SLXPro and SLX2.Order No: 21205Drywall StandInstantly raises your LeveLite laser to theheight required to clear Steel Framing Studs.Built in 1/4-20 mount.Compatible with LaserPro2, Tri-Lite, SLX Proand SLX2.Order No: 21305KeypointPosition your Tri-Lite and SLX seriesLeveLite laser over alignment marks quicklyand easily with this handy item.Compatible with Tri-Lite, SLX Pro and SLX2.Order No: 22206Ceiling MountUse this steel plate with the Magnetic Mount whenlaying out suspended ceiling rails.Compatible with LaserPro2, Tri-Lite, SLX Pro andSLX2.Order No: 21106Ruby GlassesWear these unbreakable ruby lens glassesto enhance and extend the visible range ofyour LeveLite laser. Fits over your prescriptionglasses and meets ANSI Z87.1 impactstandard.Compatible with all LeveLite products.Order No: 22038Laser TargetEnhance the laser dot and accurately transfer it ontoyour work. Built in magnet for attaching to “T” rails.Compatible with all LeveLite products.Order No: 21673Belt PouchConvenient way to always have your LeveLitetool at your side. Also protects LeveLite tool inyour tool box.Order No: 2009830WWW.HANESSUPPLY.COM30-19<strong>Equipment</strong>
30<strong>Equipment</strong>Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229LiteHouse 1 TMDual Mode Rotating Laser BeaconDual-mode Rotating Laser Beacon projects horizontalplane of light.Kit Contents ContentsLiteHouse 1 LiteHouse 1, Carrying Case, Glasses, Owners Manual,BatteriesLiteHouse 1i LiteHouse1, Carrying Case, Glasses, Owners Manual,Wall Mount, Target, BatteriesLiteHouse 1e LiteHouse1, Receiver, Rod Clamp, Carrying Case,Owners Manual, BatteriesOrder Size (in) Wt.Model No. Description L x W X H (lbs)LiteHouse 1 21669 Dual Mode Rotary Laser Beacon 5-1/2 x 5 x 7 3.3LiteHouse 1i 21670 Dual Mode Rotary Laser Beacon, Interior 5-1/2 x 5 x 7 5.3LiteHouse 1e 21671 Dual Mode Rotary Laser Beacon, Exterior 5-1/2 x 5 x 7 4.8<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337LeveLite ® /Little Giant Pump Co.Pack SolutionsComplete Solutions for ConstructionProfessionalsFor the ultimate in convenience andmaximum utility, LeveLite automaticpocket lasers are available in customconfigured PACKS. Each pack consists ofyour choice of pocket laser plus a selectionof accessories designed specificallyto meet the requirements of those tasksthat you complete everyday. All packsinclude a sturdy compartmentalized carryingcase for convenient transportation ofyour pocket laser and accessories to and from the job site.• The Drywall PACK TM contains the indispensable Drywall Stand plus 8other accessories. The Drywall Stand provides a convenient way to alignyour pocket laser over 2x4 framing.• The Max PACK TMincludes all of the Drywall PACK accessories plus theversatile Quick Clamp. With the Quick Clamp’s 6-inch capacity almostanything can become a mount for your LeveLite pocket laser.• To upgrade your LeveLite pocket laser to the MAX PACK configurationwe offer the Universal Pack TM . The Universal PACK includes a QuickClamp, Magnetic Mount, Drywall Stand, Ceiling Mount and RubyGlasses plus the compartmentalized carrying case.Note: All LeveLite pocket laser Accessories are also available individually.Size Wt.No. Model Desc. (LxWxH) (lbs)21223 Tri-Lite MAX Pack Tri-Lite + 10 Access. 17 x 12 x 4-1/8 6.022303 Tri-Lite Drywall Pack Tri-Lite + 9 Access. 17 x 12 x 4-1/8 4.322211 SLX Pro MAX Pack SLX Pro + 10 Access. 17 x 12 x 4-1/8 6.021304 SLX Pro Drywall Pack SLX Pro + 9 Access. 17 x 12 x 4-1/8 4.321309 SLX 2 MAX Pack SLX 2 + 10 Access. 17 x 12 x 4-1/8 6.022304 SLX 2 Drywall Pack SLX 2 + 9 Access. 17 x 12 x 4-1/8 4.321726 Universal MAX Pack Case + 6 Access. 17 x 12 x 4-1/8 4.3AccessoryMag- Dry- Ceil- Pro-Laser Quick Belt netic wall ing Key- Ruby Laser Owners tectiveModelTool Clamp Pouch Mount Stand Mount point Glasses Targets Manual CaseTri-Lite MAX Pk. Tri-Lite x x x x x x x x x xTri-Lite Drywall Pk. Tri-Lite x x x x x x x x xSLX Pro MAX Pk. SLX Pro x x x x x x x x x xSLX Pro Drywall Pk. SLX Pro x x x x x x x x xSLX 2 MAX Pk. SLX 2 x x x x x x x x x xSLX 2 Drywall Pk. SLX 2 x x x x x x x x xUniversal MAX Pk. x x x x x xFurther LiteHouse 1 TMSpecifications <strong>Inc</strong>lude:• Working Range: 300' with receiver.• Accuracy: +/- 3/16" at 65'• Operating temperature range: 23°-113° Fahrenheit• Battery Type: Powered by 2 C alkaline batteries (included).• Battery Life: 40 hours• Diode: 635 nm Class 2 Laser Diode.LiteHouse 2 TMMulti-Mode Rotating Laser Beacon projectsHorizontal, Vertical and Plumb beams.Kit Contents ContentsLiteHouse 2: LiteHouse 2, Carrying Case, Owners Manual,BatteriesLiteHouse 2R: LiteHouse 2, Remote Control, Carrying Case,Owners Manual, BateriesLiteHouse 2RN: LiteHouse 2, Remote Control, Alkaline BatteryHolder, Recharger, Owners Manual, NiCadBatteries (installed), Carrying CaseOrder Size (in) Wt.Model No. Description L x W X H (lbs)LiteHouse 2 21676 Rotary Laser Beacon 6-1/2 x 6 x 7 2.7LiteHouse 2R 21677 Rotary Laser Beacon w/Remote 6-1/2 x 6 x 7 3.5LiteHouse 2RN 21678 Rotary Laser Beacon w/Remote & Charger 6-1/2 x 6 x 7 4.0Further LiteHouse 2 TMSpecifications <strong>Inc</strong>lude:• Self-Leveling Range from Level: -8 to +8 degrees• Accuracy: +/- 3/16" at 100'• Power: Powered by 2 D alkaline batteries (included) or optional NiCad battery pack.• Diode: 635 nm Class 3a Laser Diode.LiteHouse 3 TMSelf-Leveling Rotating Laser BeaconKit Contents ContentsLiteHouse 3: LiteHouse 3, 90 O Prism, Wall/Tripod Mount,Magnetic Ceiling Target, Recharger, CarryingCase, Owners Manual, Battery CompartmentHex Key, 4 “C” Size NiCad BatteriesLiteHouse 3e: LiteHouse 3, 90 O Prism, Magnetic CeilingTarget, Recharger, Carrying Case, OwnersManual, Battery Compartment Hex Key, 4 “C”Size NiCad BatteriesOrder Size (in) Wt.Model No. Description L x W X H (lbs)LiteHouse 3 321679 Self-Leveling Rotary Laser Beacon 7 x 6 x 5 4.2LiteHouse 3e 321813 Self-Leveling Rotary Laser Beacon, exterior 7 x 6 x 5 4.2Further LiteHouse 3 TMSpecifications <strong>Inc</strong>lude:• Working Range: 900' with optional receiver.• Self-Leveling Range from Level: -8 to +8 degrees• Accuracy: 0.04" at 33'• Battery Type: Powered by four C size NiCad batteries (included)• Battery Life: 25 hours• Diode: 635 nm Class 2 Laser Diode.Little Giant Pump Co.WASTEWATER PUMPSUtility PumpsPPS-1 Pump SetsSet includes PP-1 pump which is dualthreaded with both 3/8" FNPT and3/4" GHT (Garden Hose Thread)intake and discharge. Two 10' hoseswith vacuum/screen attachment forinlet hose. Thermally protected.3-prong plug on power cord.PPS-1 Manual555150 . . . .115VAC 6' power cordMotor ........................... 1/10 HPMax. Flow Rate ............ 275 GPH @ 1'1040 LPH @ 30 cmIntermittent LiquidTemp. to ......................120 O FDischarge..................... 3/8" FNPT & 3/4"garden hose threadHousing........................ PolypropyleneVolute........................... PolypropyleneImpeller........................ Buna-N ®Shaft Seal..................... NitrileOperation..................... Manual,Intermittent DutyElectrical555150 ...................115VAC6" power cord.<strong>Equipment</strong>30-20WWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Water Wizard ® Submersible Pumps5 Series<strong>Inc</strong>ludes garden hose adapter and removable inlet screen for easycleaning. Lifetime oil supply. Pumps down to 1/8".5-MSP Manual505000........115V 10' power cord505086........115V 10' power cord505176........115V 18' power cord505025........115V 25' power cord505500........127V 10' power cord505501........127V 18' power cord505202........230V 12' power cord5-MSPR505486........115V 10' power cordMotor ...........................1/6 HP Shaded PoleMax. flow rate ..............1200 GPH @ 1'4542 LPH @ 30cmMax. Head....................26.3'Intermittent LiquidTemp. to.......................120 O FDischarge.....................1" FNPTHousing........................Epoxy coated castaluminumVolute...........................NylonImpeller........................NylonShaft Seal.....................Viton ®Shaft ............................Stainless SteelOperation.....................ManualPotent ® PumpAccessoriesPPIK-1155201 Replacement kit forPP-1. Impeller, cam and gasket.Sump Pumps6E Series6E-CIA-SFS Automatic506700...........115V 10' power cord506701...........115V 25' power cord506720...........230V 15' power cord6E-CIA-RFSN Manual or Automatic506740...........115V 10' power cordMotor .......................1/3 HP Shaded PoleMax. Flow Rate.........50 GPM @ 5'189 LPM @ 1.52mMax. Head ................20'Solids handling.........1/2"Intermittent LiquidTemp. to ...................140 O FDischarge .................1-1/2" FNPTHousing....................Epoxy coatedcast ironCover........................PolycarbonateVolute .......................Polypropylene/Cast IronImpeller ....................NylonShaft Seal .................Carbon/CeramicBearings ...................Upper & Lower Sinteredsleeve bearingsOperations6E-CIA-SFS ...........Automatic6E-CIA-RFSN.........Manual or AutomaticLittle Giant Pump Co./Miller5-MSPElectrical505000 .....................115V, 60Hz, 5 amps10' power cord505086 .....................115V, 60Hz, 5 amps10' power cord505176 .....................115V, 60Hz, 5 amps18' power cord505025 .....................115V, 60Hz, 5 amps25' power cord505500 .....................127V, 60Hz, 5 amps10' power cord505501 .....................127V, 60Hz, 5 amps18' power cord,505202 .....................230V, 60Hz, 5 amps12' power cord505486 .....................115V, 60Hz, 5 amps10' power cord6E-CIA-SFSActivator6E-CIA-SFS ...........“Snap-Action”Float Switch6E-CIA-RFSN.........Piggyback mechanicalfloat switchSwitch on Switch off7" - 10" 2" - 5"Electrical506700..................115V. 60Hz, 10 amps10' power cord506701..................115V, 60Hz, 10 amps25' power cord506720..................230V, 60Hz, 4.8 amps15' power cord506740..................115V, 60Hz, 10 amps10' power cordOnsite Septic TankEffluent Pumps<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.833710E Series10E-CIA-SFS Automatic511350 ............115V 10' power cord511355 ............115V 25' power cordMotor .......................1/2 HP PermanentSplit CapacitorMax. flow rate...........80 GPM @ 5"303 LPM @ 1.52mMax. Head ................24'Solids handling.........3/4"Intermittent LiquidTemp. to ...................140 O FDischarge .................1-1/2" FNPTHousing....................Epoxy coated cast ironCover........................PolycarbonateVolute .......................ABS/Cast ironImpeller ....................Vortex NylonShaft Seal .................Carbon/Ceramic10E-CIA-SFS<strong>Equipment</strong>Bearings ...................Upper & lower:Ball bearingsOperation .................AutomaticActivator...................Integral "Snap Action".................................float switchSwitch on Switch off8" - 11" 2" - 5"Electrical511350 .....................115C, 60Hz, 8.2 amps10' power cord511355 .....................115V, 60Hz, 8.2 amps25' power cordMiller ®ENGINE-DRIVEN WELDING GENERATORSBlue Star ® 3500The Blue Star ® 3500 is a compact welding and auxiliary power generatordesigned for applications where portability and versatility are essential.This unit is ideal for construction, maintenance and agriculture applications.Features• 140 amps DC welding output• Smooth and stable three-phase welding output• Excellent DC Stick performance with 1/8 – 5/32 in electrodes• 3500 watts of auxiliary power• Compact, portable unit protected by a durable steel frame• Color-coded amperage control• Powered by 9 HP Honda gasoline engine• Manual and electric start models availableProcesses• DC Stick (DC SMAW)• DC TIG (DC GTAW)Engine• Honda GX270 gasoline engine,9 HP at 3600 RPM• 1-cylinder, 4-cycle, OHV air-cooled• Manufacturer’s 2-year warrantyAccessoriesLifting Eye; Running Gear: No. 24HI;Stick Accessory Kit: No. 2WA. Call for further information on field options.Rated Amperage Single-Phase Dim. Wt. (lbs) Wt. (lbs)Output Range Auxiliary Power (in) Recoil Start Electric Start140 A, 25 V at 40 – 140 3500 watts H: 20-3/4 Net: 201 Net: 22630% Duty Cycle 26 A at 115 V W: 22-3/4 Ship: 225 Ship: 250100 A, 25 V at while not welding D: 31-1/460% Duty CycleWWW.HANESSUPPLY.COM30-2130<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-22Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Blue Star ® 6000The Blue Star ® 6000 is a compact welding and 6000-watt auxiliary powergenerator designed for light industrial Stick welding and maintenanceapplications. This portable unit is capable of producing AC auxiliary powereven while welding.Features• 180 amps DC welding output• Ideal DC Stick performance with 3/32 – 3/16 in electrodes• 6000 watts of auxiliary power• Compact, portable unit protected by a durable steel frame• Color-coded amperage control• 120V and 230V auxiliary power available• Powered by 13 HP Honda gasoline engine• Manual and electric start models availableProcesses• DC Stick (DC SMAW)• DC TIG (DC GTAW)Engine• Honda GX390 gasoline engine, 13 HPat 3600 RPM• 1-cylinder, 4-cycle, OHV air-cooled• Manufacturer's 2-year warrantyAccessoriesLifting Eye; Running Gear No. 24HI; Stick Accessory Kit: No. 2WA.Call for further information on field options.Rated Amperage Single-Phase Dim. Wt. (lbs) Wt. (lbs)Output Range Auxiliary Power (in) Recoil Start Electric Start180 A, 25 V at 40 – 180 6000 watts, peak H: 20-3/4 Net: 253 Net: 27830% Duty Cycle 5500 watts, cont. W: 22-3/4 Ship: 277 Ship: 302100 A, 25 V at while not welding D: 31-1/4100% Duty CycleBobcat TM225 NTIntroducing the Bobcat TM225 NT, a new tradition (NT) in portable enginedriven welding generators. We added a series of innovative features tothis 8000-watt unit to meet the demanding multi-purposeneeds that contractors face on the job site.The Bobcat 225 NT is also the first-and-only engine drivenwelding generator to offer an optional, cordless remotestart/stop control. This exclusive remote control saves youtime and money.• You can easily shut off the engine when not in use – savesup to 20% on fuel consumption• Remote control works with your weld cables (up to 300 feet away fromengine)• <strong>Inc</strong>rease time between maintenance intervals by up to 200%• Simple, convenient operation; durable hand-held controlProcesses• AC/DC Stick (AC/DC SMAW)• Flux Cored (FCAW)• MIG (GMAW)• Non-critical TIG (GTAW)Engine• Onan Performer Series P216industrial gasoline engine• Manufacturer's 3-year warranty(not limited by engine runningtime)• Kohler Command 18 gasoline engine• OHV design is compact, quiet and 30% more fuel efficient• Replaceable steel cylinder liners, hydraulic lifters, and full pressurelubrication• Manufacturer’s 2-year warrantySuggested Wire FeedersSuper S-32P; Spoolmatic ® 30A and WC-115 Control for aluminum.AccessoriesPlasma Cutters: Spectrum ® 300 CutMate TM or Spectrum ® 650 CutForce TM ;Cylinder Rack; Running Gear: No. 48 or No. 27; Canvas Cover: CC-1A;Trailer: AP 210; TIG High-Frequency Arc Starter: HF-25ID-1. Call for informationon LP Gas Conversion, Battery Charging Kit, Stainless Steel Case,GFCI 120 V Receptacle and Spark Arrestor Muffler.– continues –Miller ®Bobcat TM225 NT (continued)WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Rated Output at Max Open- Amp. Ranges Auxiliary Dim. Net Wt.100% Duty Cycle Circuit Voltage CC/AC CC/DC Power (in) (lbs)CC/AC: 225 A 80 VAC 50-100 50-100 8kW/kVA, H: 33 Onan: 573at 25 V 70-150 70-150 120/240 VAC, W: 18-3/4 Kohler: 565CC/DC: 210 A 80 VDC 85-225 85-210 60 Hz, 70/35 A, D: 45-1/2at 25 Vwhile not weldingCV/DC: 200 A 33 VDCat 20 V(17 - 28 Load V)Engine Specifications:Horse- Weld Idle Fuel OilEngine power Speed Speed Cap. Cap.Brand (HP) Type (RPM) (RPM) (gal) (qt)Onan 16 HP at Twin cylinder, 4-cycle, 3700 2200 10 1.5 qt; 1.75 qt.3600 RPM “L-head”, industrial, air- w/filter everycooled, gasoline100 hoursKohler 18 HP at Twin cylinder, 4-cycle, 3700 2200 10 1.75 qt; 2 qt.3600 RPM overhead valve, industrial, w/filter everyair-cooled, gasoline 100 hours for oil -every 200 hrs foroil filterPLASMA CUTTERSSpectrum ® 300 CutMateThe Spectrum ® 300 CutMate is an economical plasma cutting system forwork on all conductive metals including mild steel up to 3/8 in, aluminumto 1/4 in, and stainless steel to 5/16 in. Solid-state design and Miller's reliabletechnology packs a lot of performance into a very portable, 42 lbpackage. The CutMate is ideal for maintenance, light construction, prototyping,body shops, fabrication and HVAC ductworkSimplified internal parts eliminate the need for high-frequency starts,making the CutMate an excellent machine when high-frequency noise caninterfere with nearby control systems or computers. This versatile powersource adapts to your shop or work site by operating from either 115 or230 VAC power.Features:• Diagnostic fights for quick troubleshooting• Convenient front panel consumables compartment• Torch airflow design allows drag cutting without a standoff• Controlled pilot arc allows you to cut grates, chain link fence and otherperforated metals, as well as paintedor coated surfaces, without retriggeringthe gun.• Exclusive postflow circuit cools consumablesand torch to extend lifeProcess:• Air Plasma CuttingComes complete with:• ICE-25C torch with 15 ft. or 25 ft.cable, full 1-year warranty• 15 ft. work cable with clamp• 10 ft. power cord with 115VAC, 20 Aplug• Built-in gas/air filter and regulator with extra protectionAccessoriesCable Covers; Torch: ICE-25. Call for information on torch consumables,Power Source Mounting Bracket, Full KVA Plug Kit and 115 V Receptacleand Plug Kits.Max. Amps Input at Rated PlasmaOpen- Load Output, 60 Hz GasRated Output at Circuit Flow/ Dim. Wt.Models* 35% Duty Cycle Voltage 115V 230V KVA KW Pressure (in) (lbs)230V 20 A w/115 VAC input 265 VDC 34 17 3.95 3.1 4.5 CFM H: 17 42115/230V power, 20 A input circuit at 60 PSI W: 1825 A w/115 VAC input D: 6-3/4power, 30 A input circuit25 A w/230 VAC input power* Models listed include 15 ft. hand torch – 25 ft. torch available
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Mi-T-M ®INDUSTRIAL PRESSURE WASHERSCold Water CD SeriesElectric Direct Drive Features:• Totally enclosed fan-cooled electricmotors with manual thermal overloadprotection• Direct-drive triplex piston pumps withceramic plungers• Forged brass manifold• Stainless-steel and brass unloader• Adjustable pressure on OMUH andOMUC models• 35-ft. power cord (20 amp plug on CD-1502 models) with ground faultcircuit interrupter (GFCI)• Built-in detergent injection• Pressure relief valve on OMUH and OMUC models• Thermal relief valve• In-line water strainer• Powder coated steel mounting plate with center balanced lift and fourrubber isolators on hand carry models• 25-ft. steel wire-braided pressure hose with quick connects and bendrestrictors• Professional-grade trigger gun with safety lock-off• OMUH and OMUC units have a variable high/low pressure nozzle withadjustable spray pattern (0-60 degrees)• 1 MUH and 1 MUC units have a 15-degree high/low pressure nozzle• Powder coated steel frame (on cart mount)• Semi-pneumatic tires (on cart mount)• Hose wrap and gun/wand holder (on cart mount)• One-year limited parts and labor warranty• Five-year pump warrantyPSI/ GPM/ Voltage/ Unit Dim. Net. Wt.Model bar Ipm HP Phase L x W x H (in) (lbs)DC-1002-0MUC 1000/69 2.0/7.6 1.5 120V/1O 30.5 x 16.5 x 23 75CD-1002-0MUH 1000/69 2.0/7.6 1.5 120V/1O 25 x 15.5 x 16.5 63CD-1002-1MUC* 1000/69 2.0/7.6 1.5 120V/1O 30.5 x 16.5 x 23 75CD-1002-1MUH* 1000/69 2.0/7.6 1.5 120V/1O 25 x 15.5 x 16.5 63CD-1502-0MUC 1500/103 2.0/7.6 2.0 120V/1O 30.5 x 16.5 x 23 80CD-1502-0MUH 1500/103 2.0/7.6 2.0 120V/1O 25 x 15.5 x 16.5 67CD-1502-1MUC* 1500/103 2.0/7.6 2.0 120V/1O 30.5 x 16.5 x 23 80CD-1502-1MUH* 1500/103 2.0/7.6 2.0 120V/1O 25 x 15.5 x 16.5 67Accessory cart AW-7005-02WK available.* Pump handles incoming water up to 180 degrees.Cold Water CW SeriesGasoline Belt Drive Features:• Performance-proven OHV engineswith low-oil protection• Triplex ceramic plunger pump withforged-brass manifold• Thermal relief valve• Stainless-steel and brass unloader• Large capacity bowl-type water strainer• Cogged belt drive system and cast-iron pulleys• Two-piece belt guard with 1/4-turn release for quick access to belts• 1/4 in. powder coated steel base plate• Solid-steel axle• Pneumatic tires• Rubber isolators• Powder coated steel tube handles• Hose wrap with gun/wand holder• 50-ft. steel wire-braided pressure hose with quick connects and bendrestrictors• Professional-grade trigger gun with safety lock-off• 36-in. steel lance with rubber grip• Quick connect nozzles (0, 15, 25, 40 degrees)• Electric start on 16 HP Vanguard (optional 11 and 13 HP engines)• Two-year limited parts and labor warranty• Five-year pump warranty– continues –Mi-T-M ®CD-1002-MUHCW-3004-3MGHWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Cold Water CW Series (continued)<strong>Equipment</strong>PSI/ GPM/ Unit Dim. Net. Wt.Model bar lpm HP Engine L x W x H (in) (lbs)CW-1504-3MGH 1500/103 3.4/12.9 5.5 OHV Honda 40 x 32.5 x 25.5 124CW-1504-3MGV 1500/103 3.4/12.9 6.0 OHV Vangaurd 40 x 32.5 x 25.5 126CW-2003-3MGH 2000/138 2.8/10.6 5.5 OHV Honda 40 x 32.5 x 25.5 124CW-2003-3MGV 2000/138 2.8/10.3 6.0 OHV Vanguard 40 x 32.5 x 25.5 126CW-2008-OMGV 2000/138 8.0/30.3 16.0 OHV Vanguard 45.5 x 32.5 x 30 306CW-2504-1MKB 2500/172 3.6/13.6 9.5 OVH Kawasaki 48.5 x 35.5 x 30.5 175CW-2504-4MHO 2500/172 3.6/13.6 9.0 OHV Honda 48.5 x 35.5 x 30.5 160CW-2504-4MVO 2500/172 3.6/13.6 9.0 OHV Vanguard 48.5 x 35.5 x 30.5 163CW-2505-3MGH 2500/172 4.4/16.7 11.0 OHV Honda 48.5 x 35.5 x 30.5 212CW-2505-3MGV 2500/172 4.4/16.7 11.0 OHV Vanguard 48.5 x 35.5 x 30.5 212CW-3004-1MKB 3000/207 3.9/14.8 11.5 OHV Kawasaki 46 x 27 x 24 185CW-3004-3MGH 3000/207 3.5/13.3 11.0 OHV Honda 46 x 27 x 24 212CW-3004-3MGV 3000/207 3.5/13.3 11.0 OHV Vanguard 46 x 27 x 24 212CW-3255-3MVO 3200/221 5.1/19.3 16.0 OHV Vanguard 46 x 27 x 24 236CW-3504-3MGH 3500/241 3.5/13.3 13.0 OHV Honda 46 x 27 x 24 220CW-3504-3MGV 3500/241 3.5/13.3 13.0 OVH Vanguard 46 x 27 x 24 220CW-4003-3MGH 4000/276 3.0/11.4 13.0 OHV Honda 46 x 27 x 24 220CW-4003-3MGV 4000/276 3.0/11.4 13.0 OHV Vanguard 46 x 27 x 24 220CW-4004-3MVO 4000/276 4.0/15.1 16.0 OHV Vanguard 46 x 27 x 24 236Gasoline Belt Drive Features:• Performance-proven OHV engines withlow-oil protection• Triplex ceramic plunger pump with forgedbrassmanifold• Thermal relief valve• Stainless-steel and brass unloader• Electric start (includes battery)• Large removable 11.5 gallon fuel tank forextended run time• Large capacity bowl-type water strainerCWC-5004-0MGH• Positive drive synchronous belt/sprocket system• Two-piece belt guard with 1/4-turn release for quick access to belt• Powder coated steel frame with roll cage and lifting hook (patented)• Solid steel threaded axles• Pneumatic tires• Hose wrap with gun/wand holder• 50-ft. steel wire-braided pressure hose with quick connects and bendrestrictors• Professional-grade trigger gun with safety lock-off• 48-in. steel lance with rubber grip• Quick connect nozzles (0, 15, 25, 40 degrees)• Two-year limited parts and labor warranty• Five-year pump warrantyPSI/ GPM/ Unit Dim. Net. Wt.Model bar lpm HP Engine L x W x H (in) (lbs)CWC-4005-0MGH 4000/276 5.0/18.9 20.0 OHV Honda 43 x 27.75 x 36 385CWC-4005-0MGV 4000/276 5.0/18.9 20.0 OHV Vanguard 43 x 27.75 x 36 385CWC-5004-0MGH 5000/345 4.0/15.1 20.0 OHV Honda 43 x 27.75 x 36 385CWC-5004-0MGV 5000/345 4.0/15.1 20.0 OHV Vanguard 43 x 27.75 x 36 38530-2330<strong>Equipment</strong>
<strong>Equipment</strong>Hot Water HSP SeriesGasoline Direct Drive Features:• Performance-proven OHV engines with low-oilprotection• Triplex ceramic piston (CAT) pump with forgedbrassmanifold (1MGH/1MGV)• Triplex ceramic piston (AR) pump with forgedbrassmanifold (3MGH/3MGV)• Over-pressure protection• Large capacity bowl-type water strainer• Thermal relief valve• Stainless-steel and brass unloader• Built-in low pressure detergent injection• Exclusive EMF ignition system (patented)• Energy-efficient top-fired combustion chamber• Fuel oil, diesel or kerosene fired burner• Temperature rise 150 O maximum• Whole system diagnostic board• Easy coil drain• Wand holder• Polyethylene burner fuel tank• Fuel filter/water separator• Reinforced powder coated steel tube framewith center balanced lifting hook• Protective coil steel housing• Solid-steel axles and four pneumatic tiresBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229HSP-2003-3MGVHSP-3004-1MGH• 50-ft. steel wire-braided pressure hose with swivel and bend restrictors• Professional-grade trigger gun with safety lock-off• Adjustable high/low pressure-insulated dual lance with 15-degree fixednozzle assembly• One-year limited parts and labor warranty• Five-year pump warrantyPSI/ GPM/ Burner Tank Unit Dim. Net. Wt.Model bar lpm Engine Cap. gal./L L x W x H (in) (lbs)HSP-2003-3MGH 2000/138 2.7/10.2 5.5 HP Honda 4.0/15.1 37 x 29 x 40 266HSP-2003-3MGV 2000/138 2.7/10.2 6.0 HP Vanguard 4.0/15.1 37 x 29 x 40 271HSP-2003-1MGH 2000/138 2.7/10.2 5.5 HP Honda 4.0/15.1 37 x 29 x 40 266HSP-2003-1MGV 2000/138 2.7/10.2 6.0 HP Vanguard 4.0/15.1 37 x 29 x 40 271HSP-2403-3MGH 2400/166 2.6/9.8 6.5 HP Honda 4.0/15.1 37 x 29 x 40 269HSP-2403-1MGH 2400/166 2.5/9.5 6.5 HP Honda 4.0/15.1 37 x 29 x 40 269HSP-3004-3MGH 3000/207 3.5/13.3 11.0 HP Honda 5.5/20.8 43 x 30 x 41 428HSP-3004-3MGV 3000/207 3.5/13.3 11.0 HP Vanguard 5.5/20.8 43 x 30 x 41 428HSP-3004-1MGH 3000/207 3.5/13.3 11.0 HP Honda 5.5/20.8 43 x 30 x 41 428HSP-3004-1MGV 3000/207 3.5/13.3 11.0 HP Vanguard 5.5/20.8 43 x 30 x 41 428HSP-3504-3MGH 3500/241 3.3/12.5 13.0 HP Honda 5.5/20.8 43 x 30 x 41 428HSP-3504-3MGV 3500/241 3.3/12.5 13.0 HP Vanguard 5.5/20.8 43 x 30 x 41 430HSP-3504-1MGH 3500/241 3.3/12.5 13.0 HP Honda 5.5/20.8 43 x 30 x 41 428HSP-3504-1MGV 3500/241 3.3/12.5 13.0 Vanguard 5.5/20.8 43 x 30 x 41 428Note: Pump Drive = Direct / EMF Drive = BeltMi-T-M ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Low Pressure Detergent InjectorAW-8300-0000• Adjustable flow valve• Clear, pliable detergent hosewith large stainer• Solid brass detergent nozzle• Quick connect couplerHigh Pressure Detergent Injector50-0161• Brass and stainless steelconstruction• Adjustable metering valve• Steel mesh in-line water strainer• Operating capacity of 6 GPMSand InjectorAW-3000-0000AW-3020-0000• <strong>Inc</strong>ludes sand probe andclear hose• Consult factory before orderingExtension Reach WandAW-7015-1200 (12 foot)AW-7015-1800 (18 foot)AW-7015-2400 (24 foot)• Professional grade triggergun with safety lock-off• Complete with quick connectExtension Hose851-0006 (4000 PSI)851-0007 (3000 PSI)• 50' x 3/8" I.D.• High pressure hoses include bendrestrictors, swivel and quick connectsPRESSURE WASHER ACCESSORIESRotating BrushAW-7003-1500• Natural hair bristles• Quick connect• Adjustable angle• Rotating actionRollcageCX-0053 9 HP GASCX-0054 11 & 13 HP GASCX-0055 16 HP GASCX-0056 9 HP YANMAR30<strong>Equipment</strong>Rotating Nozzles• 0 O spray with a 25 O coverage• Quick connect nozzel with filter• Heavy Duty components for long life & reliabilityAW-7004-Series*• 5000 PSI maximum ratingAW-7300-Series*• 3000 PSI maximum ratingAW-7500-Series*• 5000 PSI maximum rating*Call for correct orfice size30-24WWW.HANESSUPPLY.COM
Series 8 Mark IIOne of the most popular band saws,a truly universal machine capable ofmaking virtually any conceivablestraight or miter cut (45° right andleft). Available in both standard andhigh column models. All mechanical.Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Marvel ®Series Cap. At 45° Blade Speed Feed Motor Ship.Wt.No. (in) (in) (FPM) (lbs) (HP) Blade (lbs)8 Mark 2 18 x 22 18 x 12-3/4 50-450 0-140 2 14'6" x 1" 2,870Series V10 & V10APCA solid, versatile vertical saw that willmake a wide range of cuts and miters.It functions as an automatic cut-offsaw that will index stock weighing asmuch as 5,000 lbs. PCIIProgrammable control available inautomatic feed model.Series Cap. At 45° Blade Speed Feed Motor Ship.Wt.No. (in) (in) (FPM) (lbs) (HP) Blade (lbs)V10 10 x 14 10 x 9 50-500 0-250 3 13'6" x 1" 3,100V10APCMV460 & MV460APCThis rugged but moderately priced machineoffers the perfect alternative for those customerswho need production and performancebut don’t require the heavy-duty, highendurance output of our larger models.Its heavy castings andweldments ensure long life,durability, and performance.Available in Manual orAutomatic Feed with theMarvel Patented PCIIProgrammable Controller.Series Cap. Blade Speed Feed Motor Ship.Wt.No. (in) (FPM) (lbs) (HP) Blade (lbs)MV460 18 x 22 60-340 0-300 7.5 15'8" x 1-1/4" 5,200MV460APCSeries 81 & 81APCVersatile, high speed, high productionvertical band saw, Whether you choosethe Series 81 APC automatic barfeed machine or the Series 81single cut model, you will begetting a powerful andextremely versatile band sawthat will provide unequalledmetal sawing performanceand a long service life.Series Cap. Blade Speed Feed Motor Ship.Wt.No. (in) (FPM) (lbs) (HP) Blade (lbs)81 18 x 20 60-400 0-300 10 14'6" x 1-1/4" 8,60081APCMarvel ® /NACWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337NAC Construction <strong>Equipment</strong>NAC PUMPS<strong>Equipment</strong>Trash PumpsPOWER: NAC trash pumps areavailable in your choice of Honda orRobin engines for consistent highperformance under the most ruggedjob site conditions. Dependability isassured through the use of internalcomponents like cast iron sleeves,forged steel crankshaft with twinbearings, forged aluminum connectingrods and electronic ignition.PERFORMANCE: The castaluminum, self priming pump headprovides the perfect balance between high strength for long life and highperformance and light weight for easy portability. The pump’s internal wearparts are engineered and manufactured to give outstanding performanceand superior life. The hi-chrome cast iron, twin open vane impeller and castiron volute with replaceable stainless steel wear plate provides significantlylonger life with less downtime and practically eliminates time consumingshims and feeler gauges. The silicone carbide mechanical seal offers thelongest life in this class. The front cover is quickly removed by turning twoknobs for easy cleaning and serviceability.PROTECTION: NAC trash pumps offer outstanding investment protectionfor years of added usage. Automatic low oil shutdown prevents costlyengine damage while the deluxe cyclone air cleaner increases overallengine life. Oversized pump cover flanges and extra thick o-ring providesa superior positive seal for dependable pumping. Replaceable galvanizedsteel nipples give superior thread life for less maintenance and costlydowntime. The steel roll cage protects the pump from external damagewhile the rubber vibration isolators protect the pump from damagingvibration and keep the pump from walking.Stainless Steel Wear SystemREPLACEABLE STAINLESS STEEL WEARPLATE: Replace the wear plate whenneeded–not the entire volute–saving timeand money. Virtually eliminates time consumingshimming and feeler gouges.HI-CHROME CAST IRON IMPELLER: Thecombination of the hi-chrome cost iron impellerand the replaceable stainless steel wear plateoffers longer life for less maintenance.Submersible PumpsPOWER: NAC submersibles are poweredby highly efficient capacitor motors for greaterefficiency and less weight. They require lessstarting and running amps for longer life andless power consumption.PROTECTION: A stainless steel shaft protectsthe motor from damaging corrosion caused bycondensation. Double oil-filled seal protects thepump from intermittent dry use and the thermaloverload protection keeps the pump from burningout if run dry for an extended period. Thereplaceable discharge flange offers long threadlife and can be replaced if damaged. The strainrelief cord protector keeps the pump's cordfrom being damaged from pulling.BT SERIES PERFORMANCE: The full jacketcooling keeps the motor cooled during operation,even when pumping at low water levels. The silicone carbide sealprovides the longest life available in its class. The pump’s streamlinedNPH3TShownBTR400SShowndesign and light weight allow it to he used in a wide range of applications.The high-grade cast iron volute and impeller resistsabrasion and provides low maintenance.BTR SERIES PERFORMANCE: The new BTR submersible pumps havethe same outstanding features as the BT series but also offer a new hightorque capacitor motor with a urethane impeller and synthetic pump caseto provide higher output at almost half the weight of typical submersiblepumps. The synthetic wear parts last up to 3 times longer than traditionalpumps while the impeller offers up to 20 times the life. The pump’s uniquedesign allows it to take solids up to 1/3". The 7" pump diameter allows it tobe used in most common pipe casings.30-2530<strong>Equipment</strong>
30<strong>Equipment</strong>Diaphragm PumpsPOWER: NAC diaphragm pumpsare available in your choice ofHonda or Robin engines for consistenthigh performance underthe most demanding conditions.Long life is assured through theuse of quality components likecast iron sleeves, forged steelcrankshaft with twin bearings andelectronic ignition.PERFORMANCE: The castBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229aluminum head provides the balance between high strength, superior performanceand light weight. The straight line flow offers fast, sure self-priming.The excellent design offers a highly efficient self-cleaning water flow.Natural rubber diaphragm and seals give long, dependable life. The 3"pump comes standard with a wheel kit for easy portability.PROTECTION: Your investment is protected for greater life with featureslike automatic low oil shutdown. Replaceable cast iron nipples offer longerthread life and lower maintenance.Centrifugal PumpsPOWER: NAC centrifugalpumps are available in yourchoice of Honda or Robinengines for consistent high performanceunder the mostdemanding job site conditions.Long life is assured through theuse of quality components likecast iron sleeves, forged steelcrankshaft with twin bearings,and electronic ignition.PERFORMANCE: Self-priming,cast aluminum pump heads offerhigh strength and light weight for long, dependable service and easyportability. The durable, cast iron volute, three vane impeller, long life waterseal and replaceable intake and discharge flanges provide excellent fieldlife for extended service and low maintenance. All internal wear parts canbe easily reached by removing only four bolts.PROTECTION: NAC pumps offer you outstanding investment protection.Quality features such as rubber vibration isolators protect the pump fromdamaging vibration and “creeping”. The durable steel roll cage protects thepump from external damage and provides easy portability. The automaticlow oil shutdown prevents costly damage to the engine while the deluxecyclone air cleaner increases overall engine life for investment protectionand less costly downtime.Pump SpecificationsN300ShownNPR3ShownROBIN ENGINE PUMPSCentrifugal Trash DiaphragmModel NPR2 NPR3 NPR4 NPR2T NPR3T NPR4T NPD4TE N300RSuction/- 2 x 2 3 x 3 4 x 4 2 x 2 3 x 3 4 x 4 4 x 4 3 x 3DischargeBore (in)Max. Solid NA NA NA 1 1.5 2 2 NASize (in)Max. Cap. 8,300 16,000 28,600 11,400 21,000 31,800 31,800 5,100(GPH)Max. Lift (ft) 26 26 26 26 26 26 26 25Total Head (ft) 105 105 92 90 90 77 77 25Engine Robin Robin Robin Robin Robin Robin Disel RobinEY-15 EY-20 EY-28 EY-20 EY-28 EY-40 DY-41Max. 3.5 4.6 7.5 4.6 7.5 10 8.5 3.5Output (HP)Starting Recoil Recoil Recoil Recoil Recoil Recoil Electric/ RecoilSystemCrankOil Senser Std. Std. Std. Std. Std. Std. No Std.Dimensions 18 x 14 20 x 14 24 x 19 23.5 x 15.5 27 x 19 28.5 x 19.5 35 x 19 39.5 x 30L x W x H (in) x 16 x 18 x 22.5 x 17 x 23.5 x25 x 30.9 x 24Ship. Wt. (lbs) 54 70 103 81 127 173 231 145– continues –NACELECTRIC SUBMERSIBLE PUMPSModel BTR400S BT751SDischarge Size (in) 2 2Total Head (ft) 41 55Max. Cap (GPH) 4,200 4,800H.P. 1/2 1<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Pump Specifications (continued)HONDA ENGINE PUMPSVoltage 110V,1o 110V,1oRunning Amps 5.8 13Diameter (in) 7.0 7.0Height (in) 12.8 15.75Ship.Wt (lbs) 20 41Centrifugal Trash DiaphragmModel NPH2 NPH3 NPH4 NPH2T NPH3T NPH4T N300HSuction/Dis- 2 x 2 3 x 3 4 x 4 2 x 2 3 x 3 4 x 4 3 x 3charge Bore (in)Max. Solid NA NA NA 1 1.5 2 NASize (in)Max. Cap. (GPH) 8,300 16,000 28,600 11,400 21,600 34,200 5,100Max. Lift (ft) 26 26 26 26 26 26 25Total Head (ft) 105 105 92 90 96 91 25Engine Honda Honda Honda Honda Honda Honda HondaGX-140 GX-160 GX-240 GX-160 GX-240 GX-340 GX-120Max. Output (HP) 4.0 5.5 8.0 5.5 8 11 4Starting System Recoil Recoil Recoil Recoil Recoil Recoil RecoilOil Senser Std. Std. Std. Std. Std. Std. Std.Dimensions 18 x 14 20.5 x 14.5 24 x 16.5 22 x 17 26.7 x 19 28.5 x 19 39.5 x 30L x W x H (in) x 14 x 16 x 22 x 16 x 24.2 x 23.5 x 24Ship. Wt. (lbs) 50 60 102 79 130 155 145NAC GENERATORSNGK-7000HShownHeavy Duty NGK SeriesThe NAC Heavy Duty NGK Series ofPortable Brushless Generators are usedwherever consistent, reliable power isneeded. We start with the renownedHonda OHV engine that has establisheda reputation for durability and dependabilitythroughout the world.Durability comes from features like thecast iron cylinder sleeve, ball bearingsupported crankshaft and chrome toppiston ring.These tough engines are known fortheir easy starting due to maintenance free electronic ignition, autodecompressionand the automatic vacuum assisted choke. Several modelseven come with electric start for greater ease of starting and versatility.The generator head is the heart of reliable, consistent power. Using thelatest technology, we have developed a highly efficient brushless designfor maximum motor starting and stable-outputs.The 100% copper, heavy duty COA windings give you dependable outputsfor years. Durable condenser voltage regulation provides stable voltageregulation that stands up to the most demanding of jobs. The rotor isfully supported by a sealed, heavy duty bearing.The electro-magnetic circuit breakers prevent tampering and protectthe generator and tool motors from burnout, as well as voltage dropscaused by overloads. The rocker design keeps them from field damageand downtime.The full power switch provides 120V or 120/240V as the applicationdemands with the flick of the rocker switch.Automatic idle control conserves fuel, reduces noise and extendsengine life. Power is instantly available upon demand.The rectangular, butt-welded roll cage frame protects the generatorfrom damage in all types of job conditions, and makes operator handlingmuch easier.Large, heavy duty aircraft style vibration isolators protect the unit fromvibration and damage.The large steel fuel tank lets the generator run longer with less downtimeand greater productivity. A large easy-fill fuel opening gets you up andrunning again fast. The pre-filter helps keep you running by protecting thecarb from dirt.<strong>Equipment</strong>30-26WWW.HANESSUPPLY.COM
Heavy Duty NGD SeriesThe NAC Heavy Duty NGD Series ofPortable Brushless Generators are usedwherever consistent, reliable power isneeded. We start with the Robin OHVengine that is setting new standards forease of starting, quieter operation andincreased performance.The Robin OHV runs quieter than ever.The auto-decompression requires significantlyless pulling force than others.Robin's exclusive Auto-Throttle andHotspark Ignition system create unparalleledstarting ease.Durability is assured by Robin’sBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229engineering for less service, less downtime, for more productivity on thejob and no lost time in the shop.To provide you with consistent, reliable power we start with the generatorhead. We have designed a highly efficient brushless generator headoffering excellent motor starting and consistent outputs.Using 100% copper windings, we employ heavy duty COA to providedependable, durable AC power. Rugged and reliable condenser voltageregulation stands up to the rigors of the job site offering stable voltage toyour tools. The rotor is fully supported by a heavy duty bearing for long lifeand reliability.Tamper-proof electro-magnetic circuit breakers protect the generatorand tools from the most common source of burnout, overloading andvoltage drop.With our full power switch, whether 120V or 120V/240V power, this unitis ready to meet your application needs at the flick of a switch. When thereis no demand for power the Automatic Idle Control reduces engine RPMconserving fuel, extending engine life and reducing noise. Full power isinstantly available when demanded.The roll cage and heavy duty vibration isolation system protects yourinvestment from damage.Our large steel fuel tank with easy-pour fuel opening provides longeroperation time and safer refueling. The in-tank fuel filter and fuel pre-filterkeep dirt and debris out of the tank and carburetor.SpecificationsNAC/Roper WhitneyNGD-6200RShownModels NGK- NGK- NGK- NGK- NGD- NGD- NGD-2900H 4300H 6000H/E 7000H/E 2900R 4300R 6200R/EGENERATORVoltage 120V 120/240V 120/240V 120/240V 120V 120/240V 120/240VMax. 2900W 4300W 6000W 7000W 2900W 4300W 6200WOutputMax. Amps 24.2 35.8 50 58.3 24.2 35.8 51.7Rated 2400W 3800W 5000W 6000W 2300W 3600W 4800WOutputRated 20 31.7 41.7 50 19.2 30 40AmpsAC OUTLETSGFCI 1 2 2 2 1 1 2120V, 20ATwist Locks 1 1 1 1 1120V, 30A120/240V, 1 1 120A120/240V 1 130AENGINEManufacturer Honda Honda Honda Honda Robin Robin RobinModel OHV OHV OHV OHV OHV OHV OHVGX-160 GX-240 GX-340 GX-390 EH17-2D EH25-2D EH34DHorsepower 5.5 8 11 13 5.5 8.5 11Starting Recoil Recoil Recoil/ Recoil/ Recoil Recoil Recoil/System E.S. E.S. E.S.Auto Idle No Yes Yes Yes No Yes YesTank 3.0 Gal. 4.5 Gal. 4.5 Gal. 4.5 Gal. 3.2 Gal. 4.4 Gal. 4.4 Gal.Run Time 9 Hrs. 8.5 Hrs. 5.6 Hrs. 5.2 Hrs. 9 Hrs. 7 Hrs. 7 Hrs.Dim. (in) 22.4 x 17.3 24.2 x 20.2 26 x 21.3 26 x 21.3 22 x 16.3 24.4 x 16.9 26.8 x 18.5(LxWxH) x 18.9 x 20.1 x 20.5 x 20.5 x 19.4 x 20.6 x 24.8Dry Wt. 95 150 176 191 106 132 172(lbs)OPTIONSWheel Kit Yes Yes Yes Yes Yes Yes YesLifting Eye Yes Yes Yes Yes Yes Yes YesTank Pro- Yes Yes Yes Yes No No Notection BarsWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337HYDRAULIC SHEARS<strong>Equipment</strong>10 Gauge and 1/4"• Heavy-duty welded frame and removable front panels allow units to bemoved by forklift plus lift rings on top of units for hoisting shears withslings• Standard electric motor and hydraulic pump system assures reliableperformance and convenient maintenance• Hinged front and side panels open for easy access to motor/pump systems• Variable speed back gauge has an easy-to-reach push button control onthe front side of the shear for more efficient operation• Adjustable rake eliminates curl and twist in cutting.• 4' side-squaring arm with recessed scale and fixed stop. Optional swingstop available• 4-edge HCHC blades produce clean, true cuts• Optional overhead light beam for precise shearing on scribed line• Fully guarded foot switch on 10" cord for remote operation• “Safety yellow” finger guard on front and see through guard on top formaximum operator safety• Electrical disconnect and controls meet ANSI standards.10 Gauge Specifications/14 Ga. Stainless SteelCommon to all models:• Maximum cutting capacity (mild steel): 10 gauge• Back gauge extension: 36"• Front to back dimension with gauging: 96"• Height: 54"• Table Height: 32"• Strokes/Minute: 20 (Max. rakeangle and full stroke)• Working pressure: 2,200 p.s.i.• Voltage: Standard 230V, 3 Phase,60HZ (with 110V control circuit)• Optional 208 or 440V, 3 Phase1/4" Specifications/8 Ga. Stainless SteelCommon to all models:• Maximum cutting capacity (mild steel): 1/4"• Back gauge extension: 36"• Front to back dimension with gauging: 132"• Height: 63"• Table Height: 32"• Strokes/Minute: 4'–20, 6'–18,8'–17 and 10'–15• Working pressure: 2,250 p.s.i.• Voltage: Standard 230V, 3 Phase,60HZ (with 110V control circuit)• Optional 208 or 440V, 3 PhaseRoper WhitneyModel 10H8Cut Length Approx.Model Length (overall) Ship. Wt.No. HP (ft) (ft) (lbs)10H5 5 5 7 4,70010H6 10 6 8 6,70010H8 10 8 10 7,70010H10 10 10 12 8,75010H12 10 12 14 13,000Cut Length Approx.Model Length (overall) Ship. Wt.No. HP (ft) (ft) (lbs)25H4 15 4 6.5 7,50025H6 15 6 8.5 8,40025H8 15 8 10.5 9,50025H10 15 10 12.5 11,00030-2730<strong>Equipment</strong>
<strong>Equipment</strong>Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Skidmore-WilhelmTORQUE-TENSION TESTERS• Reduce fastener costs• Establish assembly standards• Assure consistent power tool output• Control product qualityHow Exactly Do You Usea Skidmore-Wilhelm Torque-TensionTester?Determine the exact torque-tensionrelationship to establish tighteningstandards for each applications.The tester lets you easily determinethe joint torque-tension relationship.First, insert the fastener into thetester. Then, tightening the nut createspressure, which is transmitted tothe gage through hydraulic fluid. thegage is calibrated to read directly inpounds tension.As you tighten the fastener with a hand torquewrench, the tester gage registers tension and thetorque wrench registers torque. noting both readingsat a specified point establishes the torque-tensionstandard for the joint.Test power Tool output under StandardConditions with precision test Bolt assemblies.On a day-to-day basis, how do you know your powertools are delivering consistent tightening force eachtime you use them? Easy.With a Skidmore-Wilhelm Torque-Tension Tester, youcalibrate each tool individually and keep a record of itsout-put performance. Then periodically - even everyday - check the tool against its established norm. Anydeviation in output signals the need for adjustment ormaintenance before it affects product quality.Skidmore-Wilhelm<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Torque-Tension Testers forSmall, Medium, and Large ApplicationTorque-Tension Tester models are designedaccording to fastener size and type, maximum preload,and, for power tool output testing, the drivesize of the power tool. Special test bolt assembliesfor power tool testing are available for all models.If desired, any model can be ordered with a dualreadinggage that indicates tension in metric unitsas well as pounds.Large Applications:• Fastener: Bolts 1-1/4" through 2-1/2" (M32-M64)• Tension capacity: 225,000 Lbs. maximum• Tool/size: 1" to 2-1/2" square drive• Test bolt assembly: 6 sizes available: 1-1/4" - 2-1/2"Medium Applications• Fastener: High-strength bolts 1*1/8" through1-1/2" (M30-M38)• Tension capacity: 170,000 Lbs. maximum• Tool/size: 3/4" - 1-3/4" square drive• Test bolt assembly: 3 sizes available:1", 1-1/4", 1-1/2"• Fastener: Bolts 5/8" through 1-1/4" (M16-M32)• Tension capacity: 100,000 Lbs. maximum• Tool/size: 1/2" through 1-1/2" square drive• Test bolt assembly: 3 sizes available:3/4", 1", 1-1/4"• Fastener: Screws and bolts #10 through 9/16"(M5-M16)• Tension capacity: 30,000 Lbs. maximum• Tool/size: 1/4" through 3/4" square drive• Test bolt assembly: 2 sizes available: 5/8", 7/8"Model J features a separate low-range gage for easyreading over the tester’s entire operating range.Model RLModel JModel HModel K30<strong>Equipment</strong>Consistent, accurate power tool output testing requires standard, repeatabletest conditions. Most importantly, test conditions should simulate asclosely as possible the way the tool is actually used on the job.Production fastners are poorly suited for test purposes and should not beused. They are subject to many variations, and physical changes fromrepeated tightening and retightening can adversely affect the torque-tensionrelationship.Test Bolt AssemblyTo avoid such problems and guaranteestandard power tool test conditions,Skidmore-Wilhelm makes special hardenedally steel test bolt assemblies. firstuse the appropriate-sized assembly toestablish a tool’s performance norm. Theneach time you retest the tool simply usethe same test bolt assembly and comparethe output.Use Skidmore-Wilhelm Torque-Tension Testers to Choose the RightFasteners and Consistently Tighten Them to Specifications.Check fastener strength: During design, your Skidmore-Wilhelm Torque-Tension Tester lets you perform torque-to-yield tests and torque-to-failuretests to determine the right fastener: not simply the strongest fastener, butthe least expensive fastener strong enough to secure the joint. You can spotcheck fastener quality at any time. And because you can place actual jointcomponent samples in the tester, you can study how plating, types of washers,lubrication, and other joint variables affect the amount of torque neededto produce the required tension. In this way the tester lets you establishaccurate torque-tension tightening standards.Check power tool performance: Our testers let you determine the outputof all kinds of power tools - pneumatic, electric, and hydraulic impactwrenches, and nutrunners. You can verify settings for adjustable outputpower tools, periodically check output against established norms, andensure that assembly personnel are using power tools consistently. Tool cribpersonnel or maintenance foremen: you can quickly verify the performanceof new and rebuilt power tools as well as test whether older tools needmaintenance. And because you test your power tools by actually using themin a tightening situation, you closely simulate the tool’s on-the-job operatingconditions. Skidmore-Wilhelm Torque-Tension testers ensure quality consistencyand control.30-28WWW.HANESSUPPLY.COMSmall Applications• Fastener: Machine screws #6, #8, #10, and 1/4'(M3-M6)• Tension capacity: 5,000 Lbs. maximum• Tool/size: Power screwdrivers and small impactwrenchesModel S can be bench-mounted vertically orhorizontally. Ideal for testing small fasteners.Model SAdapter SetsEach Skidmore-Wilhelm Torque-tension Tester comes complete with plateand bushing adapters that allow you to test a variety of hex head bolts andcap screws. Self-tapping screws can also be tested. For shorter lengthbolts, tapped bushings are available.Have an unusual head configuration? Skidmore-Wilhelm can make upspecial adapters. Need metric? Adapter sets are also available in metric.Adapter sets are also available in metric equivalent sizes. See the accompanyingchart to determine which adapter sets come standard with eachtester model.TESTERSTANDARD ADAPTERS FURNISHED FOR USEMODELWITH THE FOLLOWING:Model S #6, #8, #10, & 1/4" fastenersModel J #10, 1/4", 5/16", 3/8", 7/16", 1/2" & 9/16" fastenersModel RL 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4" fastenersModel H 1-1/8" through 1-1/2"Model K 1-1/4” through 2-1/2" fasteners
Test Bolt AssembliesChoose test bolt assemblies from theaccompanying table based on power toolsquare drive size, tester model and hexsocket size.Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229TENSION- BOLT TEST POWERTESTER ASSEMBLY BOLT TOOL. HEX MAXMODEL PART NO. SIZE (in) SQ. DR. (in) SOCKET NORMS S-105 5/16 1/4 3/8 5,000J J-110 5/8 3/8, 1/2, 5/8 9/16 15,000J J-114 7/8 5/8, 3/4 7/8 30,000M, ML, RL R-112 3/4 5/8, 3/4 1-1/4 30,000M, ML, RL R-116 1 3/4, 1 1-5/8 70,000M, ,L, RL R120 1-1/4 1, 1-1/4 2 110,000H H-116 1 3/4, 1 1-5/8 70,000H H-120 1-1/4 1, 1-1/4 2 110,000H H-124 1-1/2 1-1/4, 1-1/2 2-3/8 170,000K K-120 1-1/4 1, 1-1/4 2 110,000K K-124 1-1/2 1-1/4, 1-1/2 2-3/8 170,000K K-128 1-3/4 1-1/2, 1-3/4 2-3/4 225,000K K-132 2 1-3/4, 2 3-1/8 225,000K K-136 2-1/4 2, 2-1/4 3-1/2 225,000K K-140 2-1/2 2-1/4, 2-1/2 3-7/8 225,000Other Fastener/Tool TestingProducts and ServicesThe complete Skidmore-Wilhelm product line covers a range of fastenerand assembly tool testing products for both industrial and constructionapplications. Descriptive bulletins are available giving detailed informationon most Skidmore-Wilhelm products.Model M Bolt Tension CalibratorClamps directly to beam or column for on-site calibration of impactwrenches used to tighten high-strength bolts on structural steel. Also testsfastener strength. Accepts bolt diameters 1/2" to 1-1/4", 100,000 Lbs. maximumpreload. Ideal for construction-site fastener testing. Ask for construction-sitefastener testing. Ask for Bulletin 110.Model MS Bolt Tension CalibratorSame functions as Model M, but designed specifically for shorter-lengthconstruction bolts, including Tension-control bolts, 1/2" to 1" in diameter.90,000 Lbs. capacity. Bulletin 112.Model P 3/8” Bolt Tension TesterFor sales demonstrations showing comparative fastener strength. Easilyclamps to a customer’s desk or a bench. Ask for Bulletin 101.Model W Torque Wrench CalibratorFor setting and checking beam, dial reading, or micrometer torque wrenches.Ask for Bulletin 210.Model PT Digital Torque TesterFor checking performance of impact wrenches and hand torque wrenches.Patented electronic design gives direct digital readout of torque in footpoundsor newton-meters. Ask for Bulletin 510.ACCESSORIES:Model LR-100 Hydraulic Load RelieverA hydraulic hand pump that attaches to a testerby means of a quick-disconnect fitting.Simulates service conditions by adding additionalload to a bolt already preloaded inthe tester. Also, by relieving the pressureon a bolt/lock nut assembly, the LR-100 allows measurement of the torquerequired to back off a prevailing torquelock nut - without loosening thenut.Air Timer ControlFoot switch operated air timer controldelivers air to power tool at a set pressurefor a fixed time interval. Electrictimer actuates a solenoid valve thatshuts off air flow after a pre-set interval.Ensures that the true efficiency ofthe tool is the only test variable.Operates on either 110 or 220 volts;connects to existing 3/8" or 3/4" airlines.WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Skidmore-Wilhelm/Scotchman<strong>Equipment</strong>IronworkerModel 6509-24MStandard Features• Punching Capacity 65 Tons• 9" Throat Depth• Angle Shear Capacity 6" x 6" x3/8" and 5" x 5" x 1/2"• Bar Shear Capacity 24". BladesComplete with 4 Cutting Edges• Tool Table Work Area forMounting Optional Tooling• Die Holder Complete with 2"Die Insert• Remote Foot Pedal• Adjustable Stripper• Adjustable Stroke Controlwith Scale• Two Stage Pump• Jam Nut with Wrench• Electrical Box Supplied withEmergency Palm Button and Lock-out Tag-out Accommodations• 230/460 Volt 3 Phase Electrics• All Guards Necessary to Comply with ANSI B 11-5 Standards• Fork Lift Accommodations• 1-Year WarrantyCapacities & Specifications Rated on 65,000 PSI Tensile A Mild Steel:Throat Depth 9"Punching Cap. 65 Tons1-1/16 " IN 3/4"Special Tooling 4" IN 3/16"Flat Bar Shear 24" Length1" x 6"3/4" x 8"3/16" x 24"Opt. Saber Blade 1/2" x 16"3/8" x 24"Angle Shear 90 6" x 6" x 3/8"Angle Shear 45 4" x 4" x 1/2"Strokes Per Min.Lt. Material 40Max. Capacity 12Channel Shear 2" to 5" Adj.Pickett tool 1/2", 3/4" & 1"Rod Shear 10 CavitiesRound 1/4" to 1-1/4"Square 1/4" to 1"90 V. Notcher 6" x 6" x 5/16"Rectangle Notcher 2" x 2-1/2" x 3/8"Pipe Notching 3/4", 1"Schedule 40 I.D. 1-1/4", 1-1/2" or 2"Brake 12" 40 Ton18" 35 Ton24" 30 TonHydraulics 2,500 PSIMotorsStandardOptionalDimensionsWeight230/460/5HP 3PH200/208/340/380400/415/550/575230 5HP 1PHW-24" L-60" H-66"2,750 Lbs.Note: Six foot back gauge, oversized Punch Table and oversized Shear Table are alsoavailable, please call for more information.IronworkerModel 9012-24MStandard Features• Punching Capacity 90 Tons• 12" Throat Depth• Angle Shear Capacity6" x 6" x 1/2"• Bar Shear Capacity 24". BladesComplete with 4 Cutting Edges• Tool Table Work Area for MountingOptional Tooling• Die Holder Complete with2" Die Insert• Adjustable Stripper• Jam Nut with Wrench• Removable Foot Pedal• Adjustable Stroke Control with Scale• Two Stage Pump• Electrical Box Supplied with EmergencyPalm Button and Lock-out Tag-out Accommodations• 230/460 Volt 3 Phase Electrics• All Guards Necessary to Comply with ANSI B 11-5 Standards• Fork Lift Accommodations• 1-Year Warranty– continues –30-2930<strong>Equipment</strong>
<strong>Equipment</strong>Ironworker (Model 9012-24M) – continuedBuffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Capacities & Specifications Rated on 65,000 PSI Tensile A 36 Mild Steel:Throat Depth 12"Punching Cap. 90 Tons1-1/16 " IN 1"Special Tooling 4" Max. Dia.Flat Bar Shear 24" Length1" x 8"3/4" x 10"1/2" x 16"1/4" x 24"Opt. Saber Blade 1/2" x 22"3/8" x 24"Angle Shear 90 6" x 6" x 1/2"Angle Shear 45 4" x 4" x 1/2"Strokes Per Min.Lt. Material 37Max. Capacity 10Channel Shear 2" to 6" Adj.Pickett tool 1/2", 3/4" & 1"Scotchman/Stone ®Rod Shear 10 CavitiesRound 1/4" to 1-1/4"Square 1/4" to 1"90 V. Notcher 6" x 6" x 5/16"Rectangle Notcher 2" x 2-1/2" x 3/8"Pipe Notching 3/4", 1"Schedule 40 I.D. 1-1/4", 1-1/2" or 2"Brake 12" 50 Ton18" 45 Ton24" 40 TonHydraulics 2,500 PSIMotorsStandardOptionalDimensionsWeight230/460/5HP 3PH200/208/340/380400/415/550/575230 5 HP 1 PHW-26" L-76" H-70"3,900 Lbs.Note: Six foot back gauge, oversized Punch Table and oversized Shear Table arealso available, please call for more information.<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Stone ®Mortar MixersStone Mortar, Plaster and Fireproofing mixers fit every mixing need. Froma small wheelbarrow style to a heavy-duty totally enclosed gear drivemixer, Stone offers more models, more available engine options and morestandard features than any other brand.465PM855PM655PM1285PM30<strong>Equipment</strong>CPO 350 Series• American Made• Double self-centering viseassures burr-free cuts• Miter capabilities 180° left andright• Miter locking devise stops at 45°left, straight 90° and 45° right• Double reduction gear box. Bothgears are hardened and ground• Worm wheel of top quality bronze• Slotting and longitude cuttingCPO 350 Manual Saw• Manual Clamp for Material Vise• Operator control Trigger SwitchCPO 350 PK Manual Saw• Air Operated Power Clamp for Material Vise• Operator Control Trigger SwitchCPO 350 PKPD Semi-Automatic Saw• Air Operated Power Clamp for Material Vise• Pneumatic Operated Power Down Feed• Emergency Stop ButtonMaximum CapacitiesTubing 90 Degree 45 DegreeRound 4-7/8" 4-3/8"Square 4-3/8" x 4-3/8" 4" x 4"Rectangle 5-1/2" x 4" 4" x 4"Solid 90 Degree 45 DegreeRound 2" 1-3/4"Square 2" x 2" 1-3/4" x 1-3/4"30-30• Material length stop 30"• 1 HSS Blade 12-1/2" diameter• 2 cutting speeds• 10 gallon coolant tank with pump• 1 gallon coolant• 1 blade wrench• Completely assembled ready foroperation• Warranty: 1 year partsSpecifications:CPO 350• Cutting Speeds - must specify when orderingLT (Low Turns) designed for solid mild steel, solid stainless steel & tick wall pipeLT 22/44 RPMMotor Rate: Low RPM 1 HP - High RPM 2 HPLT Variable Speed Drive Motor Rate: Low RPM 1 HP - High RPM 2 HP11 to 88 RPMHT (High Turns) designed for thin wall tube and non-ferrous materialHT 44/88 RPMMotor Rate: Mow RPM 2 P - High RPM 2.7 HPHT Variable Speed Drive Motor Rate: Low RPM 2 HP - High RPM 2.7 HP22 to 176 RPM• Factory wired. Specify 230 PH,• Width: 21-7/8"460 3 PH or 575 volt 3 PH 60 Hz• Depth: 17-1/2"• Maximum diameter Blade: 14"• Height not. incl. handle: 56-1/4"• Arbor Bore: 1-9/16"• Height floor to vise: 37-7/16"• Pin Spacing: 4/12/64 & 2/8/55• Shipping Wt: 675 lbs.WWW.HANESSUPPLY.COM855PM/Model 465PM 655PM 855PMP † 1285PMBatch Cap* 3/4 – 1 1-1/2 – 2 2-1/2 – 3 3 – 4BagsBatch Cap* Ft 3 4 6 8 12Total Vol.* Ft 3 4.3 6.9 9.0 14.8Ship. Dim. 58 x 29 x 37 64 x 34 x 54 76 x 34 x 54 81 x 56 x 59(L x W x H)Drive & Clutch V-belt to Gears V-belts to Gears V-belts to Gears Totally EnclosedHand clutch at side Front Post Front Post Gear Drive & ClutchHand Clutch Hand Clutch (no chain or belt)Power w/o power w/o power w/o power 9.2 hp WisconsinOptions 5 hp B&S 5 hp B&S 8 hp B&S 11 hp Honda5.5 hp Honda 5.5 hp Honda 8 hp B&S I/P** 18 hp B&S I/C3/4 hp Electric 8 hp B&S 11 hp B&S I/P 5 hp Electric1 hp Electric 8 hp B&S I/P** 8 hp Honda 11 hp Robin8 hp Honda 7.5 hp Robin7.5 hp Robin 2 hp Electric6 hp Robin1-1/2 hp ElectricStd. Wheels, 3.00 x 12 (12" dia.) 4.80 x 12 (20" dia) B78 x 13 (25" dia) B78 x 13 (25" dia)Bearings semi-pneumatic tires high speed tires high speed tires high speed tires& Axle Sleeve Bearings Tapered Roller Tapered Roller Tapered RollerBearings Bearings Bearings3/4" dia. Fixed Axle Extendible Axle Extendible Axle 56" Axle/(34" to 46") (34" to 46") CantileverSafety Chain Safety Chain Springs†Poly Drum Safety chainWt. (lbs) 276# w/5 B&S 550# w/8 B&S 605# w/8 B&S 1120# w/9.2 Wisc.* Batch capacity varies, based on ratio of materials used. Batch size will never equaltotal volume.** Low oil guard shutoffOptional spiral blades available on 655PM & 855PMConcreteMixersStone concretemixers meet everyjob site applicationand include thelargest portableconcrete mixingcapacities in theindustry.– continues –2CM95CMED65CM125CM
Concrete Mixers (continued)Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.022995CM/65CM 95CMP† 125CMModel 2CM Side Dump Side Dump Side DumpBatch Cap* 1/4 1/2 – 1 1 – 1-1/2 1-1/2 – 2BagsBatch Cap* Ft 3 2 6 9 12Total Vol.* Ft 3 4.1 9.0 15.1 19.8Ship Dim (in) 42 x 37 x 54 78 x 46 x 58 84 x 56 x 65 95 x 56 x 70L x W x H Drum - 22 x 15 Drum - 30 x 18 Drum - 36 x 20 Drum - 40 x 22Drum Dia xDrum OpeningDrive** V-belt to Chain to Chain to Chain toMachined Gears Cast Iron Gear Cast Iron Gear Cast Iron GearPower Options 1/4 hp Electric w/o power w/o power w/o power5 hp B&S 8 hp B&S 11 hp Honda8 hp B&S 8 hp B&S I/P 11 hp B&S I/P8 hp B&S I/P 8 hp Honda 2 hp Electric5.5 hp Honda 7.5 hp Robin 8 hp Diesel8 hp Honda 6 hp Robin7.5 hp Robin 11 hp B&S I/P6 hp Robin 6 hp Diesel11 hp B&S I/P 1-1/2 hp Electric6 hp Diesel1 hp ElectricStd. Wheels Removable 4.80 x 12 (20" dia) B78 x 13 (25" dia) B78 x 13 (25" dia)Bearings & Stand high speed tires high speed tires high speed tiresAxleTapered Roller Bearings Tapered Roller Bearings Tapered Roller Bearings46" Wide Axle 56" Axle/Cantilever 56" Axle/CantileverSafety Chain Springs SpringsSafety chain Safety chain†Poly DrumWeight (lbs) 135# w/motor 690# w/8hp Honda 800# w/8hp Honda 897# w/11hp Honda†837# w/8hp Honda* Batch capacity varies, based on ratio of materials used. Batch size will never equaltotal volume.** Belt drive available for 65CM, 95CM, and 95CMED Models.Stompers ®Stone Stompers ® set the standard for superior handling, control and reliability.The broadest line of rammers to ever hit the dirt provides moreengine selections and easier servicing – plus better overall performancemaking them the authority for the new millennium.XN650ROI XM832R XD836YXN650R0IXM832R0IModel No. XN650R XM832R XD836YDimensions:Wt. (lbs) 125 158 215LxWxH (in) 30.3 x 13.5 x 36.5 28.5 x 15 x 38 31.5 x 15 x 38Shoe Size (in) 10 x 13 11 x 13 13 x 13Operating System:Power 4 hp Robin 4 hp Robin 4 hp YanmarEngine Type Oil Injection Premix Oil Injection Premix DieselEngine Specs EC12D EC12D L40AE-DEngine RPM 4300 3900 3000 - 3600Fuel Mixture 50:1 50:1 –Fuel Cap (qts.) 3 3 3Fuel Tank Matr’l Polyethylene Polyethylene PolyethylenePerformance:Impact Force (lb) 2600 3200 3650Max. Blows/Min 780 660 630-700Max. Forward Travel 60' - 70'/Min 50' - 64'/Min. 40' - 50'/Min.Speed (ft/min.)Max. Productivity 3500 3500 3200(Sq. ft/hr)Max. Lift (in) 18 22 22Max. Amplitude (in) up to 2.5" up to 3" up to 3"Options: Extensions – –Handle Roller Handle Roller Handle RollerStone ®WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>Forward PlatesStone Forward Plates – the #1 selling plate in North America deliverssuperior performance. Exclusive eccentric housing is an integrated part ofthe base plate, so vibration is more effectively transferred to the ground.And, since the eccentric is mounted forward of the engine, Stone forwardplates deliver faster travel speeds, higher amplitudes and increasedclimbability.S-28 S-20A S-38AModel No. S20/S20A S28 S28A S38 S38ADimensions:Operating 130 150 160 180 190Wt. (lbs)Plate Size 13 x 21 19 x 24 19 x 24 20 x 24 20 x 24W x L (in)Operating System:Engine 4 hp Honda 5 hp Briggs I/P 5 hp Briggs I/P 5 hp Briggs I/P 5 hp Briggs I/POptions: 4.6 hp Robin 4.6 hp Robin 4.6 hp Robin 4.6 hp Robin5.5 hp Honda 5.5 hp Honda 5.5 hp Honda 5.5 hp Honda4.2 hp Yanmar 4.2 hp YanmarDiesel DieselWater Systems yes no yes no yes(on S20A)Water Tank 3.25 – 6 – 6Cap. (qt)Performance:Eccentric Force: 2000 3000 3000 4000 4000Productivity 3,750 7,125 7,125 10,000 10,000(sq. ft/hr)Max. Lift (in) 12 10 10 12 12Max. Travel 75 75 75 100 100Speed (ft/min)Vibration 5800 5800 5800 5400 5400FrequencyApplications: Smaller jobs Granular Granular Granular Granulartrenches, soil, soil, soil, soil,granular backfill backfill, mixed soil, mixed soil,soil, backfill asphalt backfill backfillE-Z Transport wheels for S28 seriesReversible PlatesSuperior compaction in any direction. Forward. Reverse. On the spot. Idealfor compacting sand, gravel and mixed soils in narrow trenches and alongfoundations, walls and abutments.RP522RP652RP790GModel No. RP522 RP652 RP790 SeriesDimensions:Operating Wt. (lbs) 220 408 551 - 617Plate Size (W x L) (in) 15.75 x 24 20 x 28 24 x 34Plate Size w/o – – 18 x 34std. extensionsMachine Size 45 x 15.75 x 40 45 x 20 x 40 57 x 24 x 43(L x W x H) (in)Operating System:Engine 4 hp Honda 9 hp Honda 9 hp Honda7 hp YanmarTransmission Hydrostatic Hydrostatic Hydrostatic– continues –30-3130<strong>Equipment</strong>
<strong>Equipment</strong>Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Reversible Plates (continued)Model No. RP522 RP652 RP790 SeriesPerformance:Centrifugal Force (lbs) 5200 6520 8542Vibration Frequency (vpm) 5880 5700 3900Max. Productivity 6456 9200 10,200(sq. ft/hr)Max. Speed (ft/min) 80 92 85Max. Depth Comp. (in) 12 18 20Standards: – – 6" wide extensionOptions: *Paving Mat *Paving Mat –* Call for availability.Walk-Behind RollersDurable, rugged, reliable Stone Walk-Behind Vibratory Rollers are ideal fora wide variety of asphalt and soil compaction applications. Choose fromsingle or dual drum models with internal vibration and heavy-dutymachined steel drums.WBR71D/71GWBR65DStone ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Bulldog ® Trench RollerStone Bulldogs ® provide optimum productivity on all soils, work hard,deliver maximum total applied force, for greater impact in a single pass.RD24HTModel No.RD24HTROperating Wt. (lbs) 3268#L x W x H (in) 66 x 24.8 x 49DrumpadfootDrum Width O.A. (in) 24.8Drum dia. (in) 21Total Applied Force (lbs) 16,770Static Linear Pressure (lbs/in) 72Dynamic Linear Pressure (lbs/in) 296Total Applied Linear 368Pressure (lbs/in)Static Padfoot Pressure (sq. in) 181#Dynamic Padfoot 750#Pressure (sq. in)Total Applied Padfoot 931#Pressure (sq. in)Gradeability: w/vib 45%w/o vib 55%Travel Speed: low (vib) 74(ft/min) high (w/o vib) 145Max. Lift (in) 27Tip Angle 42°Productivity (sq. ft/hr) 9,176Std. Features <strong>Inc</strong>lude: Drum scrapers,rollover cage, side & top shield, lift eye,hydraulic oil sight gauge, dry element airfilter, 17.5 gal. hydraulic oil reservoir, electricstart, zero turning radius, zero edgeclearance. Optional on remote models:Test port gauge kit.30Model No. WBR71D/71G WBR65DDrum Type Single DualDimensions:Operating Wt (lbs) 945 1412Ship. Wt (lbs) 970 1500L x W x H (in) 78 x 33 x 47 93 x 31 x 40Operating Lgth (in) 78 93Drum Width (in) 28 26Drum Dia. (in) 23 16Curb Clrnce (in) 16 8Wall Clrnce (in) .62/4.17 1.1/4.2Operating System:Drive System Hydrostatic HydrostaticEngine Options (hp) 8.3 hp Lister diesel 7.3 hp Hatz Diesel11 hp HondaEngine RPM’s 2500 2750Fuel Cap. (gal) 1.1 2.2Hyd. Cap. (gal) – 4.8Water System Noncorrosive Plastic Tank, brass taps non-Spray Barcorrosive dual spray barsWater Tank Cap. (gal) 6.6 Front - 5.3Performance:Max. Travel Speed (mph) 0 - 2 0 - 2Eccentric Force Drum (lbs) 2030 4270Frequency (vpm) 3900 4320Amplitude (in) – .02Gradability w/ vibration 25% 33%w/o vibration 33% 50%Safety Features: Deadman's Handle Deadman’s HandleReverse position systemStandards: Freewheel System Freewheel SystemParking BrakeParking BreakLifting Points, 2 Parking Legs, Lifting PointsFront & Rear Adj. Scrapers Front & Rear Adj. ScrapersAdj. HandleOptions: Tall Hook Mount Kit –Wolfpac TMRollersStone WolfPac TMAsphalt Rollers cover the territory in confined areaasphalt compacting. Five separate rollers that are easy to use, easy tomaintain and properly balanced to prevent scuffing or gouging, deliveringextra smooth finishing on all kinds of surfaces.WOLFPAC 2500 WOLFPAC 3100Model No. WOLFPAC 2500 WOLFPAC 3100Dimensions:Dry Wt (lbs) 1585 2240Operating Wt. (lbs) 2070 2890Ballasted Wt. (lbs) 2680 3100L x W x H (in) 84 x 36 x 56 82 x 39 x 58Drum Width (in) F-28"/R-32" 35.4"Drum Dia. (in) F-20"/R-24" 22"Wall Clrnce (in) .5 1.8Curb Clrnce (in) 9 16Wheelbase (in) 58 48Operating System:Engine 8.5 hp Robin 18 hp Honda Twin8 hp Honda11 hp HondaDrive Hydrostatic Single Drum Hydrostatic Double DrumSteering Hydrostatic Power Steering Hydrostatic Power SteeringFrame Rigid Frame Center-Point ArticulatingTravel Speed (mph) 0 - 4.5 0 - 5.0Fuel cap. (gal) 1.5 8Water System Gravity Feed Gravity FeedWater Tank (gal) 30 40– continues –<strong>Equipment</strong>30-32WWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Wolfpac Roller Specifications (continued)Model No. WOLFPAC 2500 WOLFPAC 3100Performance:Vibrating Drum Static Roller FrontCentrifugal Force (lbs) N/A 3000Frequency (vpm) N/A 3900Oscillation N/A ±15°Gradeability 30% 30%Inside/Outside Inside - 8.3' 6.6'/9.5'Turning Radius (ft)Max. Area Cap (ft 2 /hr) 63,360 77,880Static Linear Force (lb/in) F 31.5/R 56 F 34.5/R 53Dynamic Linear Force (lb/in) N/A 119Standards: Cocoa Mat, Machined Drums, Hour Meter, Ignition Switch,Adjustable Seat, Tool Box Under Neutral Ignition Interlock,Seat, Feathering System (Trans), Transport Link, Lifting Points,Safety Neutral Switch,Anti-Vandal Protection,Enclosed Engine Compartment, Adj. Sliding Seat,Parking Break-HandHydraulic Transmission By-PassSmooth Operator TMPower TrowelsStone Smooth Operator TMPower Trowels offer precisionhandling for the professional finisher andinclude patented features not availableon any other brand.CF364StoneStoneModel No. CF363/CF364 CF463/CF464Dimensions:Operating Wt (lbs) 160 - 185 180 - 225Dia. (in) 36 46Blades:Number 3/4 3/4Finish (in) 6 x 14 6 x 18Combination (in) 8 x 14 8 x 18Float (in) 10 x 14 10 x 18Blade Positioning/ Positive blade positioning, Positive Blade Positioning,Blade Leveler inf. var. blade leveler Inf. var. blade levelerOperating System:Engine (hp) 5 hp B&S, 5 hp B&S,5 hp B&S I/P, 5 hp B&S I/P,8 hp B&S I/P, 8 hp B&S I/P,5.5 hp Honda, 5.5 hp Honda,8 hp Honda, 8 hp Honda4.6 hp Robin, 7.5 hp Robin7.5 hp RobinRPM 50 - 130 50 - 130Std. Features:Safety Shutoff Patented Dyna-Clutch Patented Dyna-ClutchHandle Reinforced, triple-tube, Reinforced, triple-tube,Contoured, Adj.Contoured, Adj.Throttle T-handle Throttle (turns) T-handle Throttle (turns)with 1/4-turn locking with 1/4-turn lockingSpider Cast Iron Cast IronStabilizing Ring Rotating RotatingStationary Guard Shock-Mounted Shock-MountedLifting Eye Standard StandardGauges Oil sight gauge Oil sight gaugeshipped Assembled AssembledOther Features: Cushioned handgrips Cushioned handgripsWarranty: 2-yr gear case 2-yr gear caseStone ®<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Concrete ScreedStone’s Vibrating Concrete Screed consolidatesconcrete, conditions the surface, saves time.Centrifugal Beam OptgModel No. Force (lbs) Lgth (ft) Engine Wt.VS400 400# up to 15' 3.5 hp B&S 116#5 hp B&S 116#5.5 hp Honda 116#VS800 800# up to 30' 5 hp B&S 122#5 hp B&S I/P 122#4.6 hp Robin 134#5.5 hp Honda 134#<strong>Equipment</strong>Operated Disc Hydraulic Pressure Test PointsConcrete VibratorsStone’s full line of concrete vibrators includes motors, shafts and heads tomeet any job requirement• 4 electric motors and one gas motor.• Wide range of interchangeable and reversible flexshafts.• 7 high amplitude heads from 3/4" diameter pencil size to 2-1/2" diameterare factory sealed and require no servicing.• Chrome plated wrap-around cageprovides protection and ease ofhandling (electric models).• Durable lightweight cast aluminum motorhousing lasts longer (electric models).• Protected on-off switch with waterproofboot keeps out concrete and moisture(electric models).• Easily accessible brushes allow quickinspection and changing (electric models).MOTORSRecommended OperatingModel Power Max HP Volts Amps Max. Head (in) Wt. (lbs)1 HP electric 1-1/4 115 9 1-1/2 121-1/2 HP electric 1-3/4 115 15 1-3/4 142 HP electric 2-1/4 115 17 2-1/2 163 HP electric 3-1/4 115 19 2-1/2 20GV5 gas 5 – – 2-1/2 77FLEXSHAFTSLgth. Operating Lgth Operating(ft) Wt. (lbs) (ft) Wt. (lbs)1 2 10 103 3 14 145 5 21 217 7HEADSDia. Lgth Centrifugal Radius of Cap. in Operating(in) (in) Force* Influence (in) Yds. Per Hr Wt. (lbs)3/4 12 112 4 3 31 13 183 5 4 31-1/4 13 430 7 5 41-1/2 14 760 14 7 61-3/4 14 1100 18 10 82 14 1450 22 14 92-1/2 13 2330 25 16 11* Centrifugal force in lbs. at 10,600 rpm. force varies in proportionto the square of the speed.Call about the availability of rubber headsNote: All electric Motors are 115V, 60 Hz, 1 phaseVS8001 HPConcreteVibratorWWW.HANESSUPPLY.COM30-3330<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-34Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229TPI Corp.INDUSTRIAL FANSHeavy Duty Air Circulator• Size: 24" & 30"• Motor: 2-speed, 1/2 HP, 1 Ph., 115V ballbearing, totally enclosedpermanently lubricatedpermanent split capacitor.• Switch: Pull Chain• Cord: SJT type 3 conductor, 18' long• Guards: Powder coated steel• Blade: Steel hub/spider aluminum paddles• Adjustable column (4-1/2' to 7') bolts to 27"diameter steel dome base with 5 carriage bolts.• Safety yellow powder coated motor, oversizedguards and mounts.• Factory assembled and tested fan head(motor-blade-guard) shipped in one cartonwith mount in a separate carton.Meets OSHA Standards - U.L. Listed - 5 Year Limited WarrantyOptional Wheel KitHDM-WBlade CFM AmpsSize (in) Fan Head High Low (High)24 HDH 24 8600 6500 5.430 HDH 30 9850 7500 5.6HDM-ISize Style Model No. Ship.(in) Fan Type Number Fan Head Mount Wt. (lbs)24 Fan Head HDH 24 – 44Pedestal Fan HD 24-P HDH 24 HDM-P 78Wall Mount Fan HD 24-W HDH 24 HDM-W 47I-Beam Mount Fan HD 24-I HDH 24 HDM-I 53Ceiling Mount Fan HD 24-C HDH 24 HDM-C 4730 Fan Head HDH 30 – 48Pedestal Fan HD 30-P HDH 30 HDM-P 82Wall Mount Fan HD 30-W HDH 30 HDM-W 51I-Beam Mount Fan HD 30-I HDH 30 HDM-I 57Ceiling Mount Fan HD 30-C HDH 30 HDM-C 51Optional Wheel Kit HD-WK 2Direct Drive Portable Blower• Size: 36" & 42"• Motor: 2-speed on 36" model/1 speed on 42" model, Single Phase,115 Volt, ball bearing, permanently lubricated, 1050 rpm, totallyenclosed, PSC type• Switch: Rocker• Cord: SJT type 3conductor, 15' long• Blade: 3 paddle steel• Guards: Spiral wire -front and rear• Powder coated 20 ga.steel housing has frontand rear roll formedembossments for addedstrength and rigidity.SwivelStandard• Swivel model rotates 360° in 12-1/2° increments and locks in placewith a steel locking pin.• 8" Rubber WheelsMeets OSHA Standards - U.L. Listed - 1 Year Limited WarrantyBlade Fan Motor Model CFM CFM AMPS Ship.Size (in) Type HP No. High Low (high) Wt. (lbs)36 Standard 1/3 PB 36-D 12500 9000 5.6 8236 Swivel 1/3 PBS 36-D 12500 9000 5.6 11042 Standard 1/2 PB 42-D 15,600 7.9 10242 Swivel 1/2 PBS 42-D 15,600 7.9 128TPI Corp.HDH-30Fan Headw/HDM-PMountHDM-CWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Work Station Fan• Size: 12" & 18"• Motor: 3-speed, 1 Ph., 115VSleeve bearingPermanently lubricated• Switch: Pull chain• Cord: SJT type 3 conductor, 10' long• Blade: Aluminum• Guards: Double locking chrome plated• Totally enclosed motor.• Mount with one bolt or lag screw to walls, ceilings,workbenches, machines or any surface.• Fan head rotates 360° in both the horizontal andvertical direction.Meets OSHA Standards - U.L. Listed -1 Year Limited WarrantySize Model Motor CFM Amps Ship Wt.(in) No. HP High Med Low High (lbs)12 U-12-TE 1/12 2750 2200 1600 1.1 1318 U-18-TE 1/8 5750 4700 3200 2.2 20Industrial Floor Fan• Totally Enclosed Motor• Size: 12" & 18"• Motor: 3-speed, 1 Ph., 115VSleeve bearingPermanently lubricated• Switch: Rotary• Cord: SJT type 3 conductor, 10' long• Head Tilt: 360°• Guards: Double locking chrome plated• Blade: Steel hub/spider aluminum paddlesMeets OSHA Standards - U.L. Listed -1 Year Limited WarrantyOffice Oscillating Fans• 3-speed oscillating fans with pushbutton controls• 3 conductor SPT cord & plug• White powder coated wire meshguards• White plastic housing & blade• Stand fan extends to 40" heightMeets OSHA Standards - U.L. Listed -1 Year Limited WarrantyF12-TEF18-TESize Model Motor CFM Amps Ship. Wt.(in) No. HP High Med Low High (lbs)12 F-12-TE 1/12 2750 2200 1600 1.1 1318 F-18-TE 1/8 5750 4700 3200 2.2 2018 F-18H-TE 1/8 5750 4700 3200 2.2 27Desk FanSize Model Fan CFM Amps Ship. Wt.(in) No. Type Speeds High High (lbs)12 ODF-12 Desk 3 1200 .4 5.416 ODF-16 Desk 3 2100 .5 8.516 OSF-16 Stand 3 2100 .5 15.5F18H-TEOverall height ofF18H-TE is 53".StandFan
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Industrial Ceiling Fans• All metal construction• 18 Pole, 115 V, 1 Ph. Capacitor type, impedance protected motor withsealed ball bearings• Mounts to 3/8" diameter steel J-hook• White epoxy finish• Aluminum paddles• 18" Down rod standard, 24" or 36" down rods available• UL ListedCommercial Grade• Assembly required• 18" lead wires• 1 Year Warranty• Safety cable includedIndustrial Grade• Fully assembled except bladebolt down• 3 Conductor cord, 4' long with plug• Moisture/Dust resistant construction available as "DR option"• 3 Year Warranty• Safety cable includedHeavy Duty Grade• Fully assembled except blade bolt down• 3 Conductor cord, 6' long with plug• Moisture/Dust resistant construction available as "DR option"• 6 Year Warranty• Safety cable includedSizeShip Wt.Grade Model Type (in) CFM RPM AMPS (lbs)Commercial CHR-56 Down Draft 56 19000 320 1.0 19Industrial IHR-48 Down Draft 48 17000 320 .7 20Industrial IHR-56 Down Draft 56 21000 310 .9 21Industrial IHR-56R Reversible 56 21000 310 .9 21Industrial IHR-56-277V* Down Draft 56 21000 310 .6 21Heavy Duty HDHR-56 Down Draft 56 27500 320 1.1 17Heavy Duty HDHR-60 Down Draft 60 47000 320 1.1 18*277 volts - lead wires instead of cordsetSolid State ControlsModel Type AmpsHR-SS-2 1-2 Fans Speed Control 3 Max.HR-SS-5 3-5 Fans Speed Control 6 Max.HR-SS-10 6-10 Fans Speed Control 12 Max.HR-SS-5R 1-5 Fans Reversing Switch 6 Max.OptionsModel TypeHR-Guard Wire Safety Guard for 56" ModelsSuffix - X2 24" Down Rod OptionSuffix - X3 36" Down Rod OptionFan Forced Milkhouse HeaterModel188TASATypeFan ForcedVolts/Phase 120 Volts 1 PhaseWatts1500/1300/Fan OnlyMax BTU’s Per Hour 5120Cordset 6' Long 3 ConductorTemp Control Thermostat YesSafety SystemTip Switch & Over Heat LimitProtection with Audible AlarmShipping Weight 9 Lbs.Width: 10" Height: 16" Depth: 9-1/2"WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>TPI Corp.Combination Radiant & Fan Forced HeaterModel198TMASATypeRadiant and Fan ForcedVolts/Phase 120 Volts 1 PhaseWatts 1500/900/600Max BTU’s Per Hour 5120Cordset 6' Long 3 ConductorTemp Control Thermostat YesSafety SystemTip Switch & Over HeatThermostatShipping Weight 9 Lbs.Width: 11" Height: 15" Depth: 12"Portable Electric Salamander• 10 in. wheels.• Safety yellow heater enclosure with safety screenson both air intake and output openings.• Long-life finned tubular heating elements, highlimitthermal cutout switch with automatic reset.• Thermostat adjustment 40° to 100° F.• Toggle switch for fan only operation.• Magnetic contactor.• Input power terminal block.The 10KW-240V model is the only Salamander witha 10', 50-amp, 250V rated cable and straight bladerange plug. The cable is factory pre-wired to thesalamander. This model can be plugged into a standardrange outlet for use during commercial construction or foremergency heating and drying (not UL, CSA or ETL listed).Model Temp. ShipNo. KW BTU Volts Phase AMP CFM Rise Wt. (lbs)FES-1024-1C 10 34130 240 1 42 800 30 54FES-1520-3 15 51195 208 3 41.5 800 45 51FES-1524-3D 15 51195 240 1/3 36/63 800 45 51FES-1548-3D 15 51195 480 1/3 18/32 800 45 51FES-3048-3 30 102390 480 3 36 800 90 72Portable Infrared Heaters• 1.8, 2, and 4.5KW units have guards whichextend back over the top for extra protection.6 and 13.5KW heaters have double top bafflesto reduce operating temperatures.• All heaters have double wall housings on thesides to reduce operating temperatures.• All heaters have heavy duty protective wirescreens on the front of the heater. 6 and13.5KW caddy heaters can be turned 90° tochange the radiant pattern from vertical tohorizontal.• All models include fixture and factory installedelements;• Portable FHK series models are gasketed andweathertight for outdoor use. Units may behosed off after being disconnected.Model Volts/ Wt.No. Watts BTU Phase H" x W" x D" Type (Lbs)FHK-212-1CA* 1800 6142 120/1 27 x 12 x 12 Stand 12FHK-220-1A 2000 6824 208/1 27 x 12 x 12 Stand 12FHK-224-1A 2000 6824 240/1 27 x 12 x 12 Stand 12FHK-227-1A 2000 6824 277/1 27 x 12 x 12 Stand 12FHK-248-1A 2000 6824 480/1 27 x 12 x 12 Stand 12FHK-257-1A 2000 6824 600/1 27 x 12 x 12 Stand 12FHK-420-1A 4500 15345 208/1 48 x 12 x 12 Stand 19FHK-424-1A 4500 15345 240/1 48 x 12 x 12 Stand 19FHK-427-1A 4500 15345 277/1 48 x 12 x 12 Stand 19FHK-448-1A 4500 15345 480/1 48 x 12 x 12 Stand 19FHK-457-1A 4500 15345 600/1 48 x 12 x 12 Stand 19FHK-624-1CA* 240/1 43-1/2 x 20 x 16 Hand Cart 37FHK-620-3A 6000 20472 208/3 43-1/2 x 20 x 16 Hand Cart 37FHK-624-3A 6000 20472 240/3 43-1/2 x 20 x 16 Hand Cart 37FHK-627-3A 6000 20472 277/1 43-1/2 x 20 x 16 Hand Cart 37FHK-648-3A 6000 20472 480/3 43-1/2 x 20 x 16 Hand Cart 37FHK-657-3A 6000 20472 600/3 43-1/2 x 20 x 16 Hand Cart 37FHK-1320-3A 13500 46062 208/3 58 x 27-1/2 x 19 Hand Cart 65FHK-1324-3A 13500 46062 240/3 58 x 27-1/2 x 19 Hand Cart 65FHK-1327-3A 13500 46062 480/3 58 x 27-1/2 x 19 Hand Cart 65* <strong>Inc</strong>ludes 15' cordset w/grounded plug.30-3530<strong>Equipment</strong>
<strong>Equipment</strong>Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Heavy Duty Machine Tool Lights<strong>Inc</strong>andescent• Patented disc and collar swivel joints.• Horizontal or vertical bolt down mountingbracket.• Arms made of 5/8" steel tubing.BH Type• Replaceable 10 amp rocket switch.• Replaceable glazed porcelain lampsocket.VCX Type• 8' 18/3 SJTO-Cord set (total length)with molded grounded plug.• Charcoal gray baked-on enamel finish.• Bar knobs and collar thumbscrews eliminate need for hand toolfor adjustable fixture.• For units without switch - consult factory.• Lamps not included.Over-All Footcandles Ship.Reach 12" From Light Wt.Model Lamps (in) Center +10" +20" (lbs)5-BH-701A 60 Watt medium base 25 290 145-155 60-75 5A-1-23 or smaller55-BH-701A 60 Watt medium base 35 290 145-155 60-75 5A-1-23 or smaller66-BH-701A 60 Watt medium base 44 290 145-155 60-75 5A-1-23 or smaller55VCX-701B 100 Watt medium base A-19-23, 29 475 270-350 95-150 5or R-30, PAR-38 Reflector lamp,or PAR-38 Halogen reflector lamp66-VCX-701B 100 Watt medium base A-19-23, 38 475 270-350 95-150 6or R-30, PAR-38 Reflector lamp,or PAR-38 Halogen reflector lampOptional 35-710 Base Clamp-On Attachment 1High Pressure Sodium50W H.P.S. Lamp produces twice the lightas 100W incandescent bulb, but uses 1/2the energy and lasts 32 timeslonger (24,000 hours).FluorescentTwo instant start fluorescent tubesproduce 1/3 the heat of a 100Wincandescent bulb and lasts 13 timeslonger (10,000 hours).• Patented disc and collar swivel joints.• Horizontal or vertical bolt down mountingbracket.• Arms made of 5/8" steel tubing.55-HPS-029AHigh Pressure• 8' 18/3 SJTO-Cord set (total length)Sodiumwith molded grounded plug.• Charcoal gray baked-on enamel finish.TPI Corp.66-FTT26-701BFluorescent• Bar knobs and collar thumbscrews eliminate need for hand tool foradjustable fixture.• Lamps not included.Over-All Footcandles Ship.Reach 12" From Light Wt.Model Lamps (in) Center +10" +20" (lbs)55-HPS-029A 50 Watt High Pressure 35 400 380-390 360-375 10Sodium (no bulb)HPS-B 50 Watt H.P.S. bulb 166-FTT26-201B <strong>Inc</strong>ludes two 13 Watt 38 340 255 125 8instant start fluorescent tubesOptional 35-710 clamp-on base attachment for model 66-FTT26-201B 1<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337Specialty Work Lights• Optional beige or brown color.• Spring activated arm with 25"/33"/45" reach.• Clamp-on or bolt-on base - clamps to a flatsurface up to 2" thick.• 3-wire, grounded, 8' cord set with molded plug.• On/off rocker switch.• Convenience outlet - can be used to power a smallappliance or a series of lights, totaling up to 5 amps.• 3 diopter lens (1.75 times magnification at 13" focal length)standard.• 5 diopter lens (2.25 times magnification at 3.75 inches)available on 45" unit. (/5X)• A 22W T-9 circline fluorescent lamp included.Model Number Reach (in) Ship Wt. (lbs)MAG-S25-CO 25 9MAG-S33-CO 33 9MAG-S45-CO 45 9MAG-S45-CO/5X 45 9Heavy Duty Dock Lights<strong>Inc</strong>andescent • High Pressure Sodium • Quartz Halogen24" Wall Mount ArmBall Joint Ceiling Mountw/25" Spring ArmFlourescentMagnifiers40"/60" Wall Mount Arm w/Vertical Adjustment JointLight Selection Chart<strong>Inc</strong>an- High Pressure Quartzdescent Sodium HalogenWattage 150W 50W 500WLumens 2000 4000 11000Average bulb life (hr) 2000 24000 2000On/Off Switch Yes Yes NoBulb included No Yes NoWall Mount Arm• Yellow powder coated, 14 gauge steel tubing.• On dual arm units, outer arm swings 300° in horizontal plane and 210° invertical plane.• 4' of 18/3 SJT cord (no plug) available for wiring to customer suppliedelectrical box.• 3" x 5" x 3/16" steel mounting plate accepts 3/8" hardware.<strong>Inc</strong>andescent High Pressure Sodium Quartz HalogenModel Ship Wt. Model Ship Wt. Model Ship Wt.Type No. (lbs) No. (lbs) No. (Lbs)25" Ceiling Mount DK-25 SA 8 DK-25 SA/HPS 9 DKQH-25 SA 1124" Wall Mount DK-24 11 DK-24/HPS 12 DKQH-24 1540" Wall Mount DK-40-VA 15 DK-40 VA/HPS 18 DKQH-40 VA 1860" Wall Mount DK-60 VA 18 DK-60 VA/HPS 19 DKQH-60 VA 22Replacement bulb HPS-B QH-B30<strong>Equipment</strong>30-36WWW.HANESSUPPLY.COM
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Estimating the space to be heated:The following formula is used to determine the BTU’s needed to heat abuilding. This calculation would be for an average uninsulated building.Add more BTU’s if the building will have a great deal of heat loss openwindows and weather doors and reduce the BTU’s if the building is wellinsulated and weather tight.CUBIC FEET TOBE HEATEDUniversalDESIREDX .133 X =TEMPERATURE RISE• CUBIC FEET TO BE HEATED- Multiply the length times the width timesthe height of the area to be heated• DESIRED TEMPERATURE RISE- Subtract the lowest expected outsidetemperature from the desired inside temperatureEXAMPLE:A concrete block building 50 feet wide by 200 feet long with 20 feet from thefloor to the ceiling.All window and door openings are temporarily covered with plastic.The outside temperature is 15 degrees and we want the inside temperature tobe 55 degrees.Cubic Feet = 50 x 200 x 20- 200,000 cubic feetTemperature Rise = 55 - 15 = 40 degreesBTU’s Needed: 200,000 x .133 x 40 = 1,064,000 BTU’s per hourHeaters Needed: Four 250,000 BTU Convection Heaters or Three 375,000 BTUForced Air heaters will heat this job.ALWAYS VENTILATE THE HEATING AREAUniversalBTU’S/HOUR<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337<strong>Equipment</strong>Model 80-FAC(80,000 BTU/HR) Forced Air HeaterAutomatic solid state ignition, over temperaturelimiting switch, high velocity fanand many more safety and performancefeatures. Can be operated with accessorythermostat (#6184) for maximum fuel savings and uniform temperaturecontrol. Ideal for medium size jobs up to 15,000 cu. ft. Recommended foruse with 40 lb. or larger propane tank. AGA & CGA Certified.Model 85-FAC(adjustable 50,000 to 85,000 BTU/HR)Forced Air HeaterFeatures continuous electronic ignition andadjustable heat output from 50,000 to85,000 BTU/HR for buildings from 9,000 to16,000 cu. ft. High output fan for better distributionof heated air. Ignition will not take place unless heater is pluggedin. Propane flow stops if heater is accidentally unplugged. Can be operatedfor hours (at low setting) from a standard 20 lb. tank. Powder coatedfinish. Patent #5,553,220/AGA & CGA Certified.Model 125-FAC(adjustable 75,000 to 125,000 BTU/HR)Forced Air HeaterSimilar to the 85-FAC, but with higherheating output. Adjustable from 75,000to 125,000 BTU/HR and heats from 14,000to 24,000 cu. ft. Ignition will not take placeunless heater is plugged in. Can be operated for hours (at low setting)from a 40 lb. or larger propane tank. Powder coated finish. Patent #5,553,220 AGA & CGA Certified.PROPANE & NATURAL GAS FORCED AIRModel 30-FAS(30,000 BTU/HR) Blower Type Forced AirHeaterIdeal for shops, work areas, farm, ranch andcraftsmen. Features push button electronicignition, stainless steel burner, high performancesquirrel cage blower. Compact boxdesign heats up to 5,000 cu.ft. of space.Ignition will not take place unless heater isplugged in. Propane flow stops if heater isaccidentally unplugged. Operates for hoursfrom a standard 20 lb. propane tank. Powdercoated finish. Patent No. 4,848,313. AGA & CGA Certified.Model 35-FAC(35,000 BTU/HR) Forced Air HeaterEconomy model - low cost - high heat output.Keeps shops and work areas of up to6,000 cu. ft. comfortable in the coldestweather. Push button piezoelectric ignitionstandard. Light weight, compact and operatesfor hours from a standard 20 lb propane tank.Aluminized steel finish. Certification Pending.Model 45-FAC(adjustable 25,000 to 45,000 BTU/HR)Forced Air HeaterThis adjustable heater is designed for heatoutput from 25,000 to 45,000 BTU/HR anda range of heating space from 4,000 to8,000 cu. ft. Automatic electronic ignition. Propane flow stops if heateris accidentally unplugged. Can operate for hours from a standard 20 lb.propane tank. Powder coated finish. Patent # 5,553,220/AGA & CGACertified.Model 150-FAST(150,000 BTU/HR) Forced Air Heater with ThermostatThis high output heater is designed for big jobs. Lightweight and featuresautomatic ignition. This unit has a built in thermostat for most economicaloperation. Heats up to 29,000 cu. ft. Operates from one or more 100 lb.propane tanks. Powder coated finish.AGA & CGA Certified.Model 150-FANG(150,000 BTU/HR) Natural Gas FueledForced Air HeaterSimilar to 150-FAST, but designed tooperate on natural gas. Does not include built-in thermostat. <strong>Inc</strong>ludes 4"WC regulator. Does not include hose. AGA & CGA Certified.Model 3500-FACV(adjustable 175,000 to 350,000 BTU/HR) Forced Air Heater withThermostatFor the big heating jobs. Commercial, industrial, warehouse, constructionand agriculture. Heating output can be adjusted from 175,000 to 350,000BTU/HR to meet the job requirement and a built-in thermostat offers mosteconomical operation. Heats in a range of 34,000 up to 69,000 cu. ft. Thelong life “Starfire” ® ceramic burner offers quiet operation and better mixingand distribution of heated air. Recommended for use with two or more 100lb. propane cylinders. Powder coated finish. Patents #5,017,129 and#5,553,220. AGA & CGA Certified.Model 3500-FACNG(adjustable to 175,000 to 350,000BTU/HR) Natural Gas Fueled ForcedAir Heater with Thermostat)Similar to 3500-FACV, but designed tooperate from a minimum of 15 PSIGhigh pressure natural gas. <strong>Inc</strong>ludes 5 - 20 PSIG regulator.Does not include hose. Patent #5,017,129.30WWW.HANESSUPPLY.COM30-37<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>30-38Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229Model 7000-FACV(adjustable 400,000 to 700,000 BTU/HR) Forced Air Heaterwith ThermostatBig heat for big jobs. This highly portableheater features the “Starfire” ® burner forquieter operation. Compact, quiet andlightweight for its adjustable output of400,000 to 700,000 BTU/HR. Built-inthermostat. Operates from a 500 gallon orlarger tank. Patent #5,017,129/Patent#5,553,220.Propane & Natural Gas Forced Air Chart (1 of 2):Model 30-FAC 35-FAC 45-FAC 80-FAC 85-FAC 125-FACOutput - 30,000 35,000 25,000- 80,000 50,000- 75,000-BTU/HR 45,000 85,000 125,000Fuel Propane Propane Propane Propane Propane PropaneGas Gas Gas Gas Gas GasHeating Area 700 800 600- 1900 1,200- 1,800-(sq. ft.)*** 1,000 2,000 3,000Fuel Consum. 1.4 1.6 1.2 to 3.7 2.3 to 3.5 tolbs/hr 2.1 3.9 5.8Heated Air Output 140 100 300 350 350 350(cu. ft./min.)Ignition Direct Spark Manual Continuous Automatic Continuous ContinuousManualPower 115v/ 115v/ 115v/ 115v/ 115v/ 115v/Required 60Hz 60Hz 60Hz 60Hz 60Hz 60HzPressure 11" WC 10 PSIG 28" WC 11" WC 28" WC 28" WCRegulator SettingFlame Safety** Yes Yes Yes Yes Yes YesHose 10' LP 10' LP 10' LP 10' LP 10' LP 10' LPSize 16 x 9 19 x 12 19 x 12 23 x 13 23 x 13 23 x 13(L x W x H) x 15 x 14 x 14 x 16 x 16 x 16Shipping Cube 1.11 1.85 1.85 2.77 2.77 2.77(cu. ft.)Ship. Wt (lbs) 18 17 20 26 25 25** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.*** Estimated on room size with 8 ft. ceiling.Propane & Natural Gas Forced Air Chart (2 of 2):Model 150-FAST 150-FANG 3500-FACV 3500-FACNG 7000-FACVOutput - 150,000 150,000 175,000 - 175,000 - 400,000 -BTU/HR 350,000 350,000 700,000Fuel Propane Natural Propane Natural PropaneGas Gas Gas Gas GasHeating Area 3,600 3,600 4,300 - 4,300 - 9,800 -(Sq. Ft.)*** 8,600 8,600 17,000Fuel Consum. 7 lbs. 150 8.0 to 16 172 to 374 18.5 to 32.4(lbs/hr) cu. ft. lbs. cu. ft. lbs.Heated Air Output 450 450 1400 1400 2800(cu. ft./min.)Ignition Automatic Automatic Automatic Automatic AutomaticPower 115v/ 115v/ 115v/ 115v/ 115v/Required 60Hz 60Hz 60Hz 60Hz 60HzPressure 11" WC 4" WC 20 PSIG 20 PSIG 20 PSIGRegulator SettingFlame Safety** Yes Yes Yes Yes YesHose 10' LP none 10' LP none 10' LPSize (L x W x H) 28 x 11 x 17 28 x 11 x 17 32 x 15 x 21 32 x 15 x 21 29 x 54 x 34Shipping Cube 3.03 3.03 5.83 5.83 30.81(cu. ft.)Ship. Wt (lbs) 30 29 50 49 143** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.*** Estimated on room size with 8 ft. ceiling.UniversalWWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337PROPANE & NATURAL GAS CONVECTIONModel 25-VC(3 settings 15,000 - 20,000 - 25,000BTU/HR) Convection HeaterAvailable for smaller job sites, such as workshopsand emergencies. No electrical connectionrequired. Heats from 2,000 to 4,000cu. ft. with low fuel consumption. Piezoelectricpilot ignitor is standard. Will operate for hoursfrom a standard 20 lb. propane tank.Model 80-VC(adjustable 30,000 to 80,000 BTU/ HR) Convection HeaterOffers adjustable heating from 30,000 to 80,000 BTU/HR to handle smallto medium size jobs, such as workshops and outbuildings. Heats from5,000 to 15,000 cu. ft. Piezoelectric pilot light ignitor is standard on thiscompact-light-weight heater. No electrical connection required. Ideal forremote buildings or where electrical serviceis not available. Low pressure design makesfor quiet operation. Can be operated forhours (at low setting) from a standard 20 lb.propane tank. AGA & CGA Certified.Model 80-VCNG(adjustable 30,000 to 60,000 BTU/ HR)Natural Gas Fueled Convection HeaterSimilar to the 80-VC, but designed to operatefrom natural gas. 4" WC regulator included.Does not include hose.Model 225-VC(adjustable 75,000 to 200,000 BTU/HR) ConvectionHeaterHandles big heating job requirements for drywalling, concretecuring, warehouses, industry and agriculture withoutrequiring any electrical connections. Adjustable heating outputfrom 75,000 to 200,000 BTU/HR allows for use in mediumto large buildings. Features a piezoelectric pilot light ignitorand heats from 14,000 to 39,000 cu. ft. Recommendedfor use with one or more 100 lb propane cylinders.Certification pending.Model 225-S(adjustable 75,000 to 200,000 BTU/HR)Convection HeaterSame as the 225-VC, but has no piezoelectric ignitor.Propane and Natural Gas Convection Chart:Model 25-VC 80-VC 80-VCNG 225-VC 225-SOutput - 15,000 - 20,000 - 30,000 - 30,000 - 75,000 - 75,000 -BTU/HR 25,000 80,000 60,000 200,000 200,000Fuel Propane Propane Natural Propane PropaneGas Gas Gas Gas GasHeating Area 300 - 700 - 700 - 1,800 - 1,800 -(sq. ft.)*** 600 1,900 1,900 4,900 4,900Fuel Consum. 0.7 to 1.16 1.4 to 3.7 27 to 55 3.5 to 9.3 3.5 to 9.3(lbs/hr) lbs. lbs. cu. ft. lbs. lbs.Ignition Piezoelectric Piezoelectric Piezoelectric Piezoelectric ManualPilot Ignitor Pilot Ignitor* Pilot Ignitor* Pilot Ignitor*Power none none none none noneRequiredPressure 10 - 15 11" WC 4" WC 10 PSIG 10 PSIGRegulator Setting PSIGFlame Safety** Yes Yes Yes Yes YesHose 10' LP 10' LP none 10' LP 10' LPSize (L x W x H) 12 x 12 x 13 16 x 12 x 22 16 x 12 x 22 18 x 13 x 27 18 x 13 x 27Shipping Cube 1.08 2.44 2.44 3.66 3.66(cu. ft.)Ship. Wt (lbs) 12 20 20 24 24* Pilot will allow main burner to be turned on & off without relighting once the pilot hasbeen ignited.** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.*** Estimated on room size with 8 ft. ceiling.
Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229PROPANE & NATURAL GAS RADIANTUniversal<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337PROPANE INFRARED<strong>Equipment</strong>Model 100-RA(100,000 BTU/HR) 360° Radiant HeaterIdeal space heater for drafty or large areas. Infraredrays produced from the emitter surface, radiates heat ina full circle to warm surrounding people and objects.Piezoelectric pilot light ignitor is standard. No electricalconnection required. Recommended for use with 100 lb.propane cylinder. AGA & CGA Certified.Model 100-RANG(100,000 BTU/HR) Natural Gas Fueled 360° RadiantHeaterProduces 100,000 BTU/HR and operates from naturalgas. <strong>Inc</strong>ludes 4" WC regulator. Does not include hose.AGA & CGA CertifiedModel 250-RA(250,000 BTU/HR) 360° Radiant HeaterIdeal space heater for drafty or large areas. Infraredrays produced from the emitter surface, radiates heat ina full circle to warm surrounding people and objects.Piezoelectric pilot light ignitor is standard. No electricalconnection required. Recommended for use with 100 lb.propane cylinder.Model 250-RANG(250,000 BTU/HR) Natural Gas Fueled 360°Radiant HeaterProduces 250,000 BTU/HR and operates from highpressure natural gas. <strong>Inc</strong>ludes 5 PSI regulator. Doesnot include hose.Model 42-PH(40,000 BTU/HR) Radiant Patio HeaterIdeal for patios, restaurants and any open air serviceareas. Operates for hours from a standard 20 lb.propane tank, which can be concealed in the base ofthe unit. Sun-like radiant heat covers a 12' to 15' circle.Piezoelectric pilot light ignitor is standard, with no electricalconnections required. Weather resistant powdercoated finish. Certification pending.Propane and Natural Gas Radiant Chart:Model 42-PH 100-RA 100-RANG 250-RA 250-RANGOutput - 40,000 100,000 100,000 250,000 250,000BTU/HRFuel Propane Propane Natural Propane NaturalGas Gas Gas Gas GasHeating Area – 2,400 2,400 6,100 6,100(sq. ft.)***Fuel Consum. 1.86 4.6 100 11.6 250(lbs/hr) lbs. lbs. cu. ft. lbs. cu. ft.Ignition Piezoelectric Piezoelectric Piezoelectric Piezoelectric PiezoelectricPilot Ignitor* Pilot Ignitor* Pilot Ignitor* Pilot Ignitor* Pilot Ignitor*Power none none none none noneRequiredPressure 11" WC 11" WC 4" WC 10 PSIG 5 PSIGRegulator SettingFlame Safety** Yes Yes Yes Yes YesHose 10' LP 10' LP none 10' LP noneSize (L x W x H) 24 x 35 x 36 16 x 16 x 31 16 x 16 x 31 47 x 16 x 16 47 x 16 x 16Shipping Cube 18.00 4.59 4.59 6.96 6.96(cu. ft.)Ship. Wt (lbs) 107 30 28 37 36* Pilot will allow main burner to be turned on & off without relighting once the pilot hasbeen ignited.** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.*** Estimated on room size with 8 ft. ceiling.WWW.HANESSUPPLY.COM12-IR (11,000 BTU/HR) Infrared Heaters24-IR (22,000 BTU/HR) Infrared Heaters36-IR (33,000 BTU/HR) Infrared Heaters48-IR (44,000 BTU/HR) Infrared HeatersIdeal for heating people or objects economically in largeopen spaces. Space age ceramic emitters and stainlesssteel reflectors deliver infrared rays for maximum radiantheat range. Heavy duty brazed steel manifold connectsindividual radiant generators for maximum structuralintegrity. All models include mounting bracket formounting to propane tank rim, hose and 28" WC regulator.No electricity required. Models 12-IR, 24-IR and 36-IR can be mounted directly to the rim of a standard 20lb. propane tank for hours of operation. The 48-IR willoperate for hours on a 40 lb. or larger propane tank.Model 36-AP(33,000 BTU/HR) Infrared “All Purpose” Patio/DeckHeaterThis model offers additional benefits and features ofadjustable height stand with base, tank mount andpiezoelectric push button ignitor. The 36-AP is designedto deliver radiant heat more effectively through heightand directional control. Ideal for patios, decks, poolsides, work areas and open air service areas. No electricityrequired. Can be operated for hours from a 20 lb.propane tank.36-IR36-APPropane Infrared Chart:Model 12-IR 24-IR 36-IR 48-IR 36-APOutput - BTU/HR 11,000 22,000 33,000 44,000 33,000Fuel Propane Propane Propane Propane PropaneGas Gas Gas Gas GasFuel Consum. 0.50 1.0 1.5 2.2 1.5(lbs./hr.) lbs. lbs. lbs. lbs. lbs.Ignition Manual Manual Manual Manual PiezoPower Required none none none none nonePressure 28" WC 28" WC 28" WC 28" WC 28" WCRegulator SettingFlame Safety** Yes Yes Yes Yes YesHose 30" LP 30" LP 30" LP 30" LP 6' LPSize (L x W x H) 11 x 9 x 8 14 x 11 x 8 27 x 11 x 6 23 x 19 x 6 46 x 19 x 7Shipping Cube 0.46 0.68 0.99 1.49 3.35(cu. ft.)Ship. Wt (lbs) 6 8 11 14 44** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.30-3930<strong>Equipment</strong>
30<strong>Equipment</strong><strong>Equipment</strong>KEROSENE HEATERSModels:K50-FA (50,000 BTU/HR)K100-FAT (100,000 BTU/HR)K150-FAT (150,000 BTU/HR)Kerosene Forced Air HeatersSafe, efficient and easy to operate -just plug into any 110-115V 60hzreceptacle. These heaters feature continuousignition and automatic safetyshut-down if flame goes out. Built-in30-40Buffalo - Headquarters: 716.826.2636 FAX: 716.826.4412Albany/NE Division: 518.438.0139 FAX: 518.438.5343Rochester Division: 585.235.0160 FAX: 585.235.0229thermostat is incorporated on models K100-FAT and K150-FAT. Corrosionresistantsteel fuel tanks (4 gallon fuel tank on K50-FA, 12 gallon on K100-FAT and K150-FAT). Approximate hours of operation on a full tank of fuel(11hrs. on K50-FA, 16 hrs. on K100-FAT and 10.4 hrs. on K150-FAT).Clean burning is assured by motor mounted air compressor, whichsiphons and atomizes fuel. Built to industrial and commercial standards,the exclusive Universal ® design uses patented cross-surface ignition thateliminates the need for spark plugs. Other features include the exclusiveUniversal ® octagonal metal shell which increases structural integrity andstrength. Metal air inlet grills are standard. Transport hardware (axle,wheels, chassis, handle) are standard on K100-FAT and K150-FAT. Foruse with kerosene or #1 fuel oil. Heating coverages on these keroseneheaters are: K50-FA, up to 9,000 cu. ft.; K100-FAT, up to 19,000 cu. ft. andK150-FAT, up to 29,000 cu. ft. Designed for long life and ease of service.All kerosene units have a powder coated finish. Patent # 5,498,154.Universal ® kerosene heaters are AGA Certified. CSA Certification pendingon K100-FAT and K150-FAT.Models:K350-FAT(350,000 BTU/HR)K650-FAT(620,000 BTU/HR)Kerosene High PressureForced Air HeatersEasy to operate - just plug intoany 110-115V/60Hz receptacle.These heaters feature high-pressurefuel system and continuousUniversal/YamahaK350-FATK100-FATcross surface ignition designed to operate on kerosene, #1 fuel oil or#1 diesel. Built-in thermostats for most economical operation. Octagonalsheet metal shell for added structural rigidity, and large rubber tires foreasy transport. Large corrosion-resistant fuel tanks for longer operationbefore refilling (K350-FAT, 30 gallon tank for 12 hours of continuous operationand K650-FAT, 49-gallon tank for 11.4 hours of continuous operation).Easy to operate and service for long life on big heating jobs.Kerosene Forced Air Chart:Model K50-FA K100-FAT K150-FAT K350-FAT K650-FATOutput - 50,000 100,000 150,000 350,000 620,000BTU/HRFuel Kerosene or Kerosene or Kerosene or Kerosene or Kerosene or#1 Fuel Oil #1 Fuel Oil #1 Fuel Oil #1 Fuel Oil #1 Fuel OilHeating Area 1,200 2,400 3,600 8,600 14,700(sq. ft.)***Fuel Consum. .38 gph .77 gph 1.15 gph 2.69 gph 4.61 gph(lbs/hr)Tank Capacity 4 12 12 30 49US GallonsHeated Air Output 165 275 400 1,500 3,000(cu. ft./min.)Ignition Continuous Continuous Continuous Continuous ContinuousPower 115v/ 115v/ 115v/ 115v/ 115v/Required 60Hz 60Hz 60Hz 60Hz 60HzFlame Safety** Yes Yes Yes Yes YesSize (L x W x H) 33 x 15 x 15 41 x 20 x 21 41 x 20 x 21 53 x 29 x 33 74 x 79 x 45Shipping Cube 4.15 9.49 9.49 29.35 55.89(cu. ft.)Ship. Wt (lbs) 36 74 79 195 300** In the event of a Flame-Out the safety control valve automatically shuts off the fuel to thepilot & burners.*** Estimated on room size with 8 ft. ceiling.WWW.HANESSUPPLY.COM<strong>Hanes</strong> <strong>Supply</strong> of SC, <strong>Inc</strong>.CCISCO: 843.238.1338FAX: 843.238.8337YamahaINDUSTRIAL GENERATORSYG2600The YG2600’s 171cc four-stroke OHV engine delivers a potent combinationof 2600 watts (maximum AC output, with 6900 watts surge capacity)and outstanding fuel economy.• Up to 17.5 hours of continuous runningtime on each tank of gas without refueling.• Dependable, maintenance-free T.C. ignitionsystem and brushless AC alternator.• Automatic Oil Warning System shuts offengine if oil level runs low.• Oversize muffler with USFS-approved sparkarrestor ensures extra-quiet operation.Overall Dim. Dry Wt.L x W x H (in) (lbs)23.3 x 19.1 x 21 102.5YG4600DA 301cc OHV four-stroke engine delivers full-time dual 120/240-voltoperation to produce 4600 watts maximum AC output (with 12,000watts surge capacity).• Large-capacity fuel tank delivers up to 10.1 hours of dependable,continuous power.• An economy idle system slows engine speed for optimal fuel efficiencyduring no-load situations.• Automatic voltage regulator monitorsoutput for clean, accurate delivery. -• Oil-filled, non-fused thermal breakerprotects AC circuit in case of overload.• 4-point antivibration mounting systemand oversize muffler ensure smooth,quiet operation.Overall Dim. Dry Wt.L x W x H (in) (lbs)26.4 x 20.1 x 22 183YG6600DThe YG6600D delivers full-time dual 120/240-volt operation with a potent357cc OHV four-stroke engine generating 6600 watts maximum AC (and18,000 watts of surge) output.• Up to 8.3 hours of continuous operation on a tank of gas.• Low Oil Warning System with automatic engine shutoff.• Economy idle feature lowers enginespeed and saves fuel during no-loadsituations.• No-maintenance T.C.I. system andbrushless generator ensure years ofdependable, trouble-free service.• Automatic voltage regulator ensuresprecise, clean output.Overall Dim. Dry Wt.L x W x H (in) (lbs)26.4 x 20.1 x 22 185YG6600DEThe top-of the-Industrial-line YG6600DE offers the convenience of electricstart with ultra-dependable, full-time dual 120/240-volt AC output of 6600maximum watts (and 18,000 watts of surge capacity).• Large-capacity 5.5-gallon fuel tank allows up to 8.3 hours of continuousoperation without refilling.• 4-point mounting system andoversize muffler provide smooth,quiet operation.• Low Oil Warning Systemautomatically shuts off engineto prevent damage.• Automatic voltage regulatormonitors output to guaranteecorrect power delivery.Overall Dim. Dry Wt.L x W x H (in) (lbs)35.2 x 20.5 x 22 198
Change language