MSDS - Mohawk Finishing Products

More documents

Recommendations

Info

Product Name:Material Safety Data SheetWATER CLEAR ACRYLIC LACQUER SATINTarget Organs:kidneys, nervous systemCarcinogenicity:This product contains carcinogens or potential carcinogens as listed by IARC or NTP.Hazardous Listing:Components of this product are considered hazardous per the OSHA Hazard Communication Standard (29 CFR1910.1200).Section 3: Composition/Information on Ingredientsacetoneisobutyl acetatepropanealkyd resinisobutanem-xylenepolyketone resinacrylic polymerethylbenzeneo-xylenen-butyl acetateethanoltolueneformaldehydeethyl acrylatebenzenecadmiumarsenicChemical CAS Percent Composition67-64-1110-19-074-98-6proprietary75-28-5108-38-3proprietaryproprietary100-41-495-47-6123-86-464-17-5108-88-350-00-0140-88-571-43-27440-43-97440-38-230 - 5010 - 2010 - 201 - 101 - 101 - 101 - 101 - 101 - 101 - 101 - 10< 1< 0.1< 0.1< 0.1< 0.1< 0.1< 0.1Section 4: First Aid MeasuresEye Contact:If exposure occurs, flush the affected eye for at least 20 minutes. Tilt the head to prevent chemical from transferring to theuncontaminated eye. Seek medical attention immediately after flushing.EHS Review/Issue Date: 05/22/2013Page 2 of 9File:IM102-0427_MSDS_ENGUSA_009.pdf
Product Name:Material Safety Data SheetWATER CLEAR ACRYLIC LACQUER SATINIngestion:Do not induce vomiting. Dilute with water or milk. Never give fluids if the victim is unconscious or having convulsions. Seekmedical attention immediately. Contact Poison Control Center immediately.Skin Contact:If exposure occurs, flush the affected area thoroughly with water for at least 15 minutes. Destroy contaminated clothing and shoes.Seek medical attention immediately.Inhalation:Remove to fresh air. If not breathing, administer CPR until help arrives or the victim starts to breathe on his own. If breathing isdifficult, give oxygen. Seek medical attention immediately.Section 5: Fire Fighting MeasuresExtinguishing Media:Use alcohol foam, dry chemical, carbon dioxide or any Class B fire extinguishing agent. Water may be unsuitable for extinguishingfires. Water may be used to cool and prevent the rupture of containers that are exposed to the heat from a fire.Products of Combustion:Protection of Firefighters / Explosion Hazards:Evacuate all persons from the fire area to a safe location. Move non-burning material, as feasible, to a safe location as soon aspossible. Fire fighters should be protected from potential explosion hazards while extinguishing the fire. Wear self-containedbreathing apparatus (SCBA) and full fire-fighting protective clothing. Thoroughly decontaminate all protective equipment after use.Containers of this material may build up pressure if exposed to heat (fire). Use water spray to cool fire-exposed containers. Usewater spray to disperse vapors if a spill or leak has not ignited. DO NOT extinguish a fire resulting from the flow of flammableliquid until the flow of the liquid is effectively shut off. This precaution will help prevent the accumulation of an explosive vapor-airmixture after the initial fire is extinguished.Section 6: Accidental Release MeasuresEHS Review/Issue Date: 05/22/2013Page 3 of 9File:IM102-0427_MSDS_ENGUSA_009.pdf
Page 1: Material Safety Data SheetSection 1
Page 5 and 6: Product Name:Material Safety Data S
Page 7 and 8: Product Name:Material Safety Data S
Page 9: Product Name:Material Safety Data S

MSDS - Mohawk Finishing Products

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?