America's Premier Industrial Tool Storage

Since 1911®TOOL BOXESCHESTS/CABINETSWORK STATIONSMODULAR CABINETSAmerica’s PremierIndustrial Tool Storage“Built to Work—Built to Last”www.kennedymfg.com

Designed from the wheels up specificallyfor the maintenance professional• Full-width, full-depth chestshold more tools• Roller cabinets roll smoothlyon 6 x 2” ball-bearing casters• Maintenance carts includenon-slip, open weave drawerliners to keep tools in place• Maintenance carts also comewith durable, coated MDFwork surface• All Maintenance Pro productscome with tubular high-securitylocks with two keys• Available in two new colors—gloss blue finish and glossyellow finishNew ProductsMaintenance CartsBuilt to Work—Built to Last• High-gloss Black Powder Finish• Heavy-welded Steel Construction• High-security Tubular Key Locks• Ball-bearing Drawer Slides• Heavy-Duty Tubular Side Handles• Full-width Aluminum Drawer Pulls• Heavy-duty Roller-bearing Casters• MDF Work Surface2

Lean Manufacturing . . . 5S . . . Tool ControlLean Manufacturing is the process of reducing all activities on the shopfloor that do not add value!5S is the process of creating a clutter-free workplace with visual controlsthrough 5 steps—the 5 steps in English are:Housekeeping—Workplace Organization—Clean Up—Standardized Procedures—Sustained ImprovementsHow can Kennedy help?Kennedy has unique products and systems to visually store and control parts, bins andtools in both stationary and mobile applications.Tool Control promotes the logical organization and easy accessof NECESSARY Tools.Tool Control means:• Fewer Tools to Purchase• Easier Maintenance of Tools• Higher Productivity• Better Oversight of Tools—fewer tools disappear or are misplaced5Lean Mfg. & Tool Control

Machinists’ ChestsFacts and FeaturesDrop-front panels are double-wallconstruction for added rigidityand tool security. Your valuabletools can’t walk away with thedrop-front panel in place andthe chest locked. Front panelconceals and secures drawers.Stores in base when not in use.Thick, wool felt drawer linershelp keep precision tools cleanand protect against corrosion.80844 80840 80843Take a look at the double-wall sidepanel. Both an inner and outer steelwall in a critical chest area. Look atthe full-depth slides and slidecarrier channels too. This integral,side panel/slide construction evenlydistributes and transfers drawerloads to the chest bottom panel.An important aid in eliminatingstress on the chest spot welds.Kennedy uses 350 cylinder lock andkey changes to help protect yourchest’s contents. All Kennedy chestsand cabinets come with two keys.Features & Benefits6Chest lid hinges are equippedwith rust-resistant, stainless-steelpins which are staked to preventpunch-out and lid removal.The tamper-proof, internal drawerlocking system cannot be reachedby bolt cutters or hacksaw, ordamaged when one drawer isclosed with the chest locked.Smooth operating, full-lengthchest hinges are staked and securelywelded to prevent lid removal.Rugged, cap-end constructionon chest lids uses one of thestrongest, self-reinforcingstructural designs known tokeep lids square and weathertight.Two-piece, I-beam drawer slidespermit smooth, easy full drawerextension. And, they’re strongerthan one-piece slides which haveweak shoulder areas and maysplit under heavy drawer loads.Slide limit stops keep drawersfrom extending beyond the chestframe. Spring clips on the slidesallow drawer removal for cleaning.Take the two-piece drawer slides onKennedy machinists’ chests. They arestronger than one-piece slides whichhave weak shoulder areas and maysplit under heavy drawer loads.Slide limit stops keep the drawersfrom extending beyond the chestframe. Spring clips on the slidesallow drawer removal for cleaning.Mechanics’ ChestsFacts & FeaturesAll chest exposed edges are rolledand flattened for added strengthand safety.One-piece, heavy-gauge steel back,bottom and top till panels are securelywelded to the double-wall side panels,giving the chests a tight, solid fit. Thisintegral, chest construction evenlydistributes and transfers drawer loadsto the chest bottom panel. An importantaid in eliminating stress on the chestspot welds.New, full-depth chests with full-widthdrawers offer ball bearing slides.

Mechanic’s Chests12-DRAWER2912X3412XMatch up 2912X with 2907X and 3412X with 3407X to make the perfectcombos for the mechanic who wants maximum storage for all his tools.Made of heavyweight 18 gauge steel construction with ball-bearingdrawer slides on all drawers. Come with full-length aluminum drawerpulls and tubular high security locks.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2912X 00856 00857 12 29 20 20 1 Ú2 166 181Top Till 28 7 Ú8 19 3 Ú4 2 5 Ú8Drawers: 9 7 9 Ú16 18 22 25 18 21 25 18 43412X 00858 00859 12 34 20 20 1 Ú2 181 196Top Till 33 7 Ú8 19 3 Ú4 2 5 Ú8Drawers: 9 9 3 Ú16 18 22 30 18 21 30 18 4Roller Cabinets7-DRAWER2907X3407XCabinet body of 18 and 16 gauge steel construction. Triple reinforcedfront corners and full-height slide carriers. End wall reinforced to givetriple wall construction. Comes with 5 x 2” roller bearing casters boltedto full-length, heavy gauge bottom reinforcements and tubular highsecurity locks. Drawers of 18 gauge steel construction and ball-bearingdrawer slides on all drawers.Choice of brown wrinkle finish or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2907X 10159 10157 7 29 20 40 198 215Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 103407X 10162 10160 7 34 20 40 209 231Drawers: 3 30 18 1 Ú2 23 30 18 1 Ú2 41 30 18 1 Ú2 10Heavy-Duty Extended Mobile Combo5-DRAWER 10-DRAWER4405 Chest 4410 Roller CabinetModel 4405 chest comes with full-length aluminum drawer pulls.Compartment has removable partial shelf and locking door. Fivedrawers with ball-bearing slides and locking door are keyed alike.Model 4410 roller cabinet includes tubular end handle, four 6 x 2” rollerbearing casters with phenolic wheels bolted to full-length, heavy gaugebottom reinforcements; two 10” ball bearing wheels with solid rubber tireson center axle provide maximum maneuverability; and two locks keyedalike. Full-width drawer holds object up to 39” long. All drawers have ballbearingslides. Available in brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.4405 10283 10281 5 43 3 Ú4 20 16 1 Ú2 123 137Drawers: 4 25 18 1 Ú2 21 25 18 1 Ú2 4Compartment 15 1 Ú2 19 3 Ú8 15 3 Ú84410 10284 10282 10 43 3 Ú4 20 37 1 Ú2 301 316Drawers: 1 39 1 Ú2 18 1 Ú2 62 25 18 1 Ú2 23 25 18 1 Ú2 43 12 18 1 Ú2 21 12 18 1 Ú2 102912X or 3412X2907X or 3407X440544109Professional Series

Specially designed for the maintenance professional, Maintenance Proproducts feature a full-line of chests, roller cabinets, maintenance cartsand mobile benches.5-Drawer Maintenance ChestFacts and Features:Ball-bearing drawer slides on all drawers plus large full-widthpulls make opening drawers smoother and easier. Come withtubular high security lock and two keys.2700MP3401MPAvailable in gloss blue and gloss yellow powder finish.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2700MP 00868 5 27 18 18 3 ⁄8 90 98Drawers: 4 23 16 1 ⁄2 21 23 16 1 ⁄2 42701MP 00869 Same dimensions as 2700MP 90 983400MP 00870 5 34 20 18 3 ⁄8 146 156Drawers: 4 30 18 1 ⁄2 21 30 18 1 ⁄2 43401MP 00871 Same dimensions as 3400MP 146 1566-Drawer Roller Cabinet Facts and Features:Ball-bearing drawer slides on all drawers plus large full-widthpulls make opening drawers smoother and easier.Come with tubular high security lock and two keys andtubular side handle. Heavy-duty top mat protects work surface.Rugged, over-sized 6 x 2” roller bearing casters provide smoothmobility.2702MP3403MPAvailable in gloss blue and gloss yellow powder finish.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2702MP 00872 6 27 18 39 140 150Drawers: 1 23 16 1 ⁄2 24 23 16 1 ⁄2 41 23 16 1 ⁄2 102703MP 00873 Same dimensions as 2702MP 140 1503402MP 00874 6 34 20 40 221 243Drawers: 1 30 18 1 ⁄2 24 30 18 1 ⁄2 41 30 18 1 ⁄2 103403MP 00875 Same dimensions as 3402MP 221 243Hang-on Cabinets Facts and Features:Two models available add extra storage to Maintenance Proroller cabinets.Both models include two adjustable shelves with ball-bearingslides and locking door. Heavy-duty top mat protects worksurface. Can be attached to either side of roller cabinet.10380MP3401MP/3403MP/301MPAvailable in gloss blue and gloss yellow powder finish.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Width Depth Height Lbs. Lbs.380MP 00876 13 5 ⁄8 18 33 1 ⁄8 53 58Shelves (2): 9 3 ⁄4 16 1 ⁄2 2381MP 00877 Same dimensions as 380MP 53 58300MP 00878 13 5 ⁄8 20 33 1 ⁄8 56 61Shelves (2): 9 3 ⁄4 18 1 ⁄2 2301MP 00879 Same dimensions as 300MP 56 61

Maintenance Cart Facts and Features:• Ball-bearing drawer slides on all drawers plus largefull- width pulls make opening drawers smoother and easier• Includes non-slip, open weave drawer liners• Durable, coated MDF work surface protects cabinet top• Come with tubular high security lock and two keys• Available in gloss blue and gloss yellow powder finishYellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.3900MP 00880 8 39 3 ⁄8 20 39 225 250Drawers: 3 35 18 1 ⁄2 24 35 18 1 ⁄2 41 35 18 1 ⁄2 63901MP 00881 Same dimensions as 3900MP 225 2506 x 2”roller bearing casters and 10” wheels mounted on a center axlecreate maximum stability and maneuverability. Ten-drawer model hastop drawer that holds tools up to 39” long.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.4400MP 00882 10 43 3 ⁄4 20 37 1 ⁄2 316 331Drawers: 1 39 1 ⁄2 18 1 ⁄2 62 25 18 1 ⁄2 23 25 18 1 ⁄2 43 12 18 1 ⁄2 21 12 18 1 ⁄2 104401MP 00883 Same dimensions as 4400MP 316 331Rugged 6 x 2” roller bearing casters and 10” wheels mounted on acenter axle create maximum stability and maneuverability. Twelvedrawer models have full-width top drawer.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.5300MP 00884 12 53 18 40 1 ⁄2 283 323Drawers: 1 49 16 1 ⁄2 44 23 16 1 ⁄2 25 23 16 1 ⁄2 41 23 16 1 ⁄2 61 23 16 1 ⁄2 105301MP 00885 Same dimensions as 5300MP 283 3235804MP 00904 12 58 20 42 1 ⁄2 478 503Drawers: 1 52 3 ⁄4 18 3 ⁄4 64 25 18 3 ⁄4 25 25 18 3 ⁄4 41 25 18 3 ⁄4 61 25 18 3 ⁄4 105805MP 00905 Same dimensions as 5804MP 478 503Maintenance cart canopy adds storage space to 5300MP/5301MP maintenancecarts. Twin gas struts keep door open for full access to interior.Inner wall has square hole perforations for versatile hanging storage.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Width Depth Height Lbs. Lbs.5350MP 00900 53 18 20 75 855351MP 00901 Same dimensions as 5350MP 75 8510-Drawer Heavy-duty Mobile Versa-Bench ®Rugged 8 x 2” roller bearing phenolic wheels hold up to 3600 lbs.Two doors cover drawers and can be padlocked for security.Yellow Blue Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.4800MP 00888 10 48 26 35 7 ⁄8 500 530Drawers: 1 44 23 1 ⁄2 52 30 23 1 ⁄2 23 30 23 1 ⁄2 43 12 23 1 ⁄2 21 12 23 1 ⁄2 104801MP 00889 Same dimensions as 4800MP 500 5303900MP8-Drawer models 3900MP and 3901MPhave rugged 6 x 2” roller bearing castersto move tools to the job easily.4800MP4401MP5300MP/5804MP5350MP30-piece toolholder set no. 99852 is included(see page 30 for set contents).11

12Pro-Line Maintenance Carts“Built to Work”—”Built to Last”• High-gloss Black Powder Finish• Heavy-welded Steel Construction• High-security Tubular Key Locks• Ball-bearing Drawer Slides• Heavy-duty Tubular Side Handles• Full-width Aluminum Drawer Pulls• Heavy-duty Roller-bearing Casters• MDF Work Surface10493 or 1049510492 or 1049410491Maintenance Carts12-Drawer39” x 18” 41” x 20”10493 10495Model 10493 comes with 35” extra wide top drawer to holdlarge, bulky tools. Also includes 5 x 2” roller bearing casters.Model 10495 comes with 37” extra wide top drawer.Includes 6 x 2” roller bearing casters.Black gloss finish.Net ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.10493 12 39 3 Ú8 18 39 225 255Drawers: 1 35 3 Ú4 16 1 Ú2 62 23 16 1 Ú2 23 23 16 1 Ú2 41 23 16 1 Ú2 62 9 3 Ú4 16 1 Ú2 22 9 3 Ú4 16 1 Ú2 41 9 3 Ú4 16 1 Ú2 1010495 12 41 3 Ú8 20 42 250 280Drawers: 1 37 3 Ú4 18 1 Ú2 62 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 62 9 3 Ú4 18 1 Ú2 22 9 3 Ú4 18 1 Ú2 41 9 3 Ú4 18 1 Ú2 10Maintenance Carts13-Drawer39” x 18” 41” x 20”10492 10494Model 10492 comes with 5 x 2” roller bearing casters.Model 10494 comes with 6 x 2” roller bearing casters.Black gloss finish.Net ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.10492 13 39 3 Ú8 18 39 220 250Drawers: 1 23 16 1 Ú2 25 23 16 1 Ú2 41 23 16 1 Ú2 61 9 3 Ú4 16 1 Ú2 24 9 3 Ú4 16 1 Ú2 41 9 3 Ú4 16 1 Ú2 1010494 13 41 3 Ú8 20 42 245 275Drawers: 1 25 18 1 Ú2 25 25 18 1 Ú2 41 25 18 1 Ú2 61 9 3 Ú4 18 1 Ú2 24 9 3 Ú4 18 1 Ú2 41 9 3 Ú4 18 1 Ú2 10Maintenance Cart7-Drawer39” x 18”10491Model 10491 includes adjustable MDF shelf insidecompartment secured by locking door. Includes5 x 2” roller bearing casters. Black gloss finish.Net ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.10491 7 39 3 Ú8 18 35 175 205Drawers: 3 23 16 1 Ú2 23 23 16 1 Ú2 41 23 16 1 Ú2 6Compartment: 10 3 Ú4 18 28

Maintenance Carts10-DRAWER 15-DRAWERBALL-BEARING SLIDES310X315XMaintenance carts move more tools to the job than ever before!Both models have huge 39” x 18” work surface, full-width drawerpulls and tubular side handle for ease of handling. Two keyed-alike,high security tubular locks keep tools safe. Four 5 x 2” roller bearingcasters move tools smoothly. Body made of 18 gauge steel, drawersof 20 gauge steel.310X315XBall-bearing drawer slides on all drawers permit smooth draweroperation under heavy loads.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.310X 64310 64311 10 39 3 Ú8 18 35 180 210Drawers: 3 23 16 1 Ú2 42 23 16 1 Ú2 63 9 5 Ú8 16 1 Ú2 42 9 5 Ú8 16 1 Ú2 6315X 64314 64315 15 39 3 Ú8 18 39 230 260Drawers: 5 23 16 1 Ú2 23 23 16 1 Ú2 41 23 16 1 Ú2 62 9 5 Ú8 16 1 Ú2 23 9 5 Ú8 16 1 Ú2 41 9 5 Ú8 16 1 Ú2 12Model 315X with Maple TopProtect your maintenance cart witha 1 1 Ú2” thick butcher block maple topor a heavy-duty non-slip top mat.See our Tool Storage AccessoryCatalog for details.305XModel 310X with Top MatMaintenance Chest5-DRAWERBALL-BEARING SLIDES305XMaintenance chest tops off maintenance cart models 310X and 315Xwith the maximum in storage for the maintenance mechanic.Chest fits flush on Pro-Line 39” maintenance carts and will alsofit on 41” Pro-Line models. See page 12.Model 305X has snap-in ball-bearing drawer slides, full-length drawerpulls and high security tubular lock. Compartment has removablepartial shelf and locking door.Choice of brown wrinkle, smooth red or black gloss powder finish.Brn. Red Black Net ShipUPC UPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.305X 00658 00659 00902 5 39 3 Ú8 18 16 1 Ú2 93 102Drawers: 4 23 16 1 Ú2 21 23 16 1 Ú2 4Compartment: 13 1 Ú2 17 3 Ú4 13 1 Ú413Industrial Series

Industrial Series14273 or 273X275 or 275X295 or 295X277 or 277X297 or 297XRoller CabinetsAll 27” wide models accommodate any 27” wide or smallerchests, chest bases or riser. 29” wide models will alsoaccommodate 29” wide or smaller chests and chest bases.5 x 1 1 Ú4” casters standard on 27” cabinet;5 x 2” sintered bearing casters standardon 29” cabinets.Drawers have automatic, internal locking system.Choice of brown wrinkle or smooth red powder finish.3-DRAWER 3-DRAWERFRICTION SLIDES BALL-BEARING SLIDES273 273XModel 273 has snap-in standard friction drawer slides. Model 273X hassnap-in ball-bearing drawer slides.Swing-down panel conceals and secures spacious storage compartment.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.273 00058 10298 3 27 18 35 99 110Drawers: 2 23 16 1 Ú2 41 23 16 1 Ú2 6Compartment 24 1 Ú8 17 3 Ú4 11 1 Ú4273X 00604 00605 Same dimensions as 273 102 1135-DRAWER 5-DRAWERFRICTION SLIDES BALL-BEARING SLIDES275 295 275X 295XModels 275 and 295 have snap-in standard friction drawer slides.Models 275X and 295X have snap-in ball-bearing drawer slides.Swing-down panel conceals and secures spacious storage compartment.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.275 00060 10299 5 27 18 35 110 121Drawers: 3 23 16 1 Ú2 22 23 16 1 Ú2 4Compartment 24 1 Ú8 17 3 Ú4 11 1 Ú4275X 00606 00607 Same dimensions as 275 115 126295 00067 10147 5 29 20 35 128 140Drawers: 3 25 18 1 Ú2 22 25 18 1 Ú2 4Compartment 26 1 Ú8 19 3 Ú4 11 1 Ú4295X 00612 00613 Same dimensions as 295 133 1457-DRAWER 7-DRAWERFRICTION SLIDES BALL-BEARING SLIDES277 297 277X 297XModels 277 and 297 have snap-in standard friction drawer slides.Models 277X and 297X have snap-in ball-bearing drawer slides.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.277 00063 10146 7 27 18 35 127 138Drawers: 3 23 16 1 Ú2 23 23 16 1 Ú2 41 23 16 1 Ú2 6277X 00608 00609 Same dimensions as 277 134 145297 00071 10425 7 29 20 35 146 158Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 6297X 00614 00615 Same dimensions as 297 153 165

Roller Cabinets27” wide models accommodate any 27” wide or smaller chests,chest bases or riser. 34” wide model will also accommodate29” or 34” wide chests and chest bases. 5 x 2” sintered bearingcasters standard on 27” and 34”cabinets. Drawers have anautomatic, internal locking system. Choice of brown wrinkle orsmooth red powder finish.6-DRAWERBALL-BEARING SLIDES376XFour inches taller than our 27 and 29 inch widecabinets shown on page 14.Model 376X has snap-in ball-bearing drawer slides.Side handle and 5 x 2 inch casters standard.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.376X 00616 00617 6 27 18 39 137 148Drawers: 3 23 16 1 Ú2 23 23 16 1 Ú2 4Compartment 24 1 Ú8 17 3 Ú4 11 1 Ú4376X8-DRAWERBALL-BEARING SLIDES378XJust the cabinet to fill the needs of those who want workbenchheight and loads of tool storage space.Four inches taller than our 27 and 29 inch wide cabinets shownon page 14.Snap-in ball-bearing drawer slides. Side handle and 5 x 2 inchcasters standard.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.378X 00618 00619 8 27 18 39 154 165Drawers: 3 23 16 1 Ú2 24 23 16 1 Ú2 41 23 16 1 Ú2 68-DRAWERBALL-BEARING SLIDES348XThis big size cabinet has that top-of-the-line look—inside and out.Use with 2805, 2806 and 2812 chests.Cabinet body made of 18 gauge steel; drawers of 20 gauge steel; bottompanel of 16 gauge steel. The bottom panel is also reinforced on the casterside with “hat section” channels.Snap-in ball-bearing drawer slides side handle and 5 x 2 inch sinteredbearing casters standard.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.348X 10165 10164 8 34 20 40 206 228Drawers: 3 30 18 1 Ú2 24 30 18 1 Ú2 41 30 18 1 Ú2 6378X348X15Industrial Series

Hang-On Cabinets5-DRAWER5-DRAWERFRICTION SLIDES BALL-BEARING SLIDES185 205 185X 205XBoth cabinets have internal drawer locking systemand bolt to either side of your roller cabinet.Models 185 and 185X fit Kennedy models 273, 273X,275, 275X, 277, 277X.Models 205 and 205X fit Kennedy models 295, 295X,297, 297X.185 or 185X205 or 205XAll available in brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.185 10406 10407 5 13 5 Ú8 18 29 67 71Drawers: 1 9 3 Ú4 16 1 Ú2 23 9 3 Ú4 16 1 Ú2 41 9 3 Ú4 16 1 Ú2 10185X 00622 00623 Same dimensions as 185 72 76205 10408 10409 5 13 5 Ú8 20 29 72 77Drawers: 1 9 3 Ú4 18 1 Ú2 23 9 3 Ú4 18 1 Ú2 41 9 3 Ú4 18 1 Ú2 10205X 00624 00625 Same dimensions as 205 77 82Hang-On Cabinets6-DRAWERBALL-BEARING SLIDES306X 386XBoth cabinets have internal drawer locking system and bolt toeither side of your roller cabinet.Model 386X fits Kennedy models 376X and 378X.Model 306X fitS Kennedy models 348X, 2907X and 3407X.Industrial Series16306X386X182, 202382, 302Both models available in brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.386X 00664 00665 6 13 5 Ú8 18 33 1 Ú8 89 94Drawers: 1 9 3 Ú4 16 1 Ú2 24 9 3 Ú4 16 1 Ú2 41 9 3 Ú4 16 1 Ú2 10306X 00666 00667 6 13 5 Ú8 20 33 1 Ú8 94 100Drawers: 1 9 3 Ú4 18 1 Ú2 24 9 3 Ú4 18 1 Ú2 41 9 3 Ú4 18 1 Ú2 10Hang-On Cabinets2-SHELF182 202 382 302Universal hang-on cabinets have two adjustable pull-out shelvesthat operate on ball-bearing slides provide easy access to tools. Allcabinets have locking door and bolt to either side of your roller cabinet.Model 182 fits Kennedy models 273, 273X, 275, 275X, 277and 277X. Model 202 fits Kennedy models 295, 295X, 297and 297X.Model 382 fits Kennedy models 376X and 378X.Model 302 fits Kennedy models 348X, 2907X and 3407X.All available in brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Width Depth Height Lbs. Lbs.182 00847 00848 13 5 Ú8 18 29 45 49Shelves: 9 3 Ú4 16 1 Ú2 2202 00849 00850 13 5 Ú8 20 29 47 52Shelves: 9 3 Ú4 18 1 Ú2 2382 00851 00852 13 5 Ú8 18 33 1 Ú8 53 58Shelves: 9 3 Ú4 16 1 Ú2 2302 00845 00846 13 5 Ú8 20 33 1 Ú8 56 61Shelves: 9 3 Ú4 18 1 Ú2 2

Drawer InterlockRoller CabinetsBALL-BEARING SLIDES297LX 378LX“Only one-drawer-open-at-a-time” drawer interlock safety feature helpsprevent cabinets from tipping under heavy drawer loads due to severaldrawers being open at the same time.Models 297LX and 378LX have snap-in ball-bearing drawer slides and5 x 2” casters.All models available in brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.297LX 00676 00677 7 29 20 35 157 169Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 6378LX 00678 00679 8 27 18 39 158 170Drawers: 3 23 16 1 Ú2 24 23 16 1 Ú2 41 23 16 1 Ú2 6297LXDrawer Interlocksafety featureprevents openingmore than onedrawer at a time.378LXRoller Cabinet Add-OnsFoldaway ShelfDS1DS1 shelf provides 2.4 square feet of added work surface. Raisedsides keep tools from rolling off. Folds flat when not in use.Attaches to any 27, 29 or 34 inch wide cabinet. Bolts furnished.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Width Depth Height Lbs. Lbs.DS1 00066 10155 20 1 Ú8 17 1 Ú4 1 10.5 11Versa-Carts ®5-DRAWER5-DRAWERFRICTION SLIDES BALL-BEARING SLIDES415 435 415X 435XAll include deck of 16 gauge steel with 1 1 Ú2 inch high sides. Reinforcedon wheel and caster side with “hat section” channels. Come with twoten-inch, ball bearing wheels with solid rubber tires and two 5 x 2 inchswivel casters with toe locks. Strong tubular steel handle and attachmenthardware included. 1,000 pound capacity.Models 415 and 435 have snap-in friction drawer slides.Models 415X and 435X have snap-in ball-bearing drawer slides.Models 415 and 415X include 410 platform and five-drawer cabinet.Use with any 27” wide cabinet shown on page 14. Available in brownwrinkle or smooth red powder finish.Models 435 and 435X include 430 platform and five-drawer cabinet.Use with any 29” wide cabinet shown on page 14. Available in brownwrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.415 10412 10413 5 41 1 Ú8 18 3 Ú8 36 1 Ú4 102 112Drawers: 1 9 3 Ú4 16 1 Ú2 23 9 3 Ú4 16 1 Ú2 41 9 3 Ú4 16 1 Ú2 10415X 00626 00627 Same dimensions as 415 107 117435 10414 10415 5 43 1 Ú8 20 1 Ú4 36 1 Ú4 118 131Drawers: 1 9 3 Ú4 18 1 Ú2 23 9 3 Ú4 18 1 Ú2 41 9 3 Ú4 18 1 Ú2 10435X 00628 00629 Same dimensions as 435 123 136DS1Folds flat when not in use.MAXIMUMMANEUVERABILITYMAXIMUMSTABILITY+ + =415 or 435415X or 435XPick your wheel and caster arrangement.410 or 430 185(X) 277(X) or 297(X) 415/277(X)or 205(X) less casters or 435/297(X)17Industrial Series

Machinists’ Chests & Chest Bases183-DRAWER 7-DRAWERApprentice Apprentice620 520Drawers and top till wool felt-lined. Vinyl cushioned, steel core top handle.Model 620 comes with four adjustable, zinc coated steel drawer dividers.Spring clips hold in place. Available in brown wrinkle powder finish.Model 520 comes with six adjustable, zinc coated steel drawer dividers.Spring clips hold in place. Available in brown wrinkle powder finish.Brn.Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Drs. Width Depth Height Lbs. Lbs.620 00003 3 20 1 Ú8 8 1 Ú2 13 5 Ú8 25 32Top Till 20 8 3 Ú8 3 1 Ú4Drawers: 1 18 1 Ú4 7 1 Ú2 1 1 Ú21 18 1 Ú4 7 1 Ú2 2 1 Ú41 18 1 Ú4 7 1 Ú2 3 1 Ú8520 00001 7 20 1 Ú8 8 1 Ú2 13 5 Ú8 28 35Top Till 20 8 3 Ú8 3 1 Ú4Drawers: 4 8 5 Ú8 7 1 Ú2 11 8 5 Ú8 7 1 Ú2 21 18 1 Ú4 7 1 Ú2 1 1 Ú21 18 1 Ú4 7 1 Ú2 2 1 Ú48-DRAWER 11-DRAWER 11-DRAWERJourneyman Professional Professional526 52611 3611Drawers and top till wool felt-lined.Model 526 comes with steel side handles and six adjustable, zinccoated steel drawer dividers standard. Spring clips hold in place.Model 52611 comes with steel side handles and eight adjustable, zinccoated steel drawer dividers standard. Spring clips hold in place.Model 3611 has felt covered bottom glides to protect drop front panelfrom scratches. Comes with steel side handles and six adjustable, zinccoated steel drawer dividers standard. Spring clips hold in place.All models available in brown wrinkle powder finish.Brn.Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Drs. Width Depth Height Lbs. Lbs.526 00002 8 26 3 Ú4 8 1 Ú2 13 5 Ú8 36 44Top Till 26 1 Ú2 8 3 Ú8 3 1 Ú4Drawers: Handbook 5 1 Ú2 7 1 Ú2 3 1 Ú44 8 5 Ú8 7 1 Ú2 11 8 5 Ú8 7 1 Ú2 21 24 3 Ú4 7 1 Ú2 1 1 Ú21 24 3 Ú4 7 1 Ú2 2 1 Ú452611 00094 11 26 3 Ú4 8 1 Ú2 18 47 56Top Till 26 1 Ú2 8 3 Ú8 3 1 Ú4Drawers: Handbook 5 1 Ú2 7 1 Ú2 4 3 Ú86 8 5 Ú8 7 1 Ú2 11 8 5 Ú8 7 1 Ú2 21 24 3 Ú4 7 1 Ú2 1 1 Ú21 24 3 Ú4 7 1 Ú2 2 1 Ú41 24 3 Ú4 7 1 Ú2 3 1 Ú83611 10430 11 26 1 Ú8 12 18 7 Ú8 69 75Top Till 26 11 7 Ú8 2 5 Ú8Drawers: Handbook 5 1 Ú2 10 7 Ú8 5 1 Ú26 7 5 Ú8 10 7 Ú8 1 1 Ú41 7 5 Ú8 10 7 Ú8 2 5 Ú82 23 10 7 Ú8 21 23 10 7 Ú8 3Add-On BasesMC22 MC28 5150All models have wool felt-lined top drawer.Model MC22 fits under models 620 and 520; models 5150 and MC28fit 526, 52611 and 3611. Available in brown wrinkle powder finish.Brn. Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Drs. Width Depth Height Lbs. Lbs.MC22 00004 2 21 5 Ú8 9 5 Ú8 7 7 Ú8 17 19Drawers: 1 18 9 3 Ú8 1 1 Ú21 18 9 3 Ú8 3 1 Ú2MC28 00005 2 28 1 Ú8 9 5 Ú8 7 7 Ú8 21 23Drawers: 1 24 1 Ú2 9 3 Ú8 1 1 Ú21 24 1 Ú2 9 3 Ú8 3 1 Ú25150 05150 2 26 3 Ú4 12 1 Ú2 9 1 Ú2 28 37Drawers: 1 25 10 7 Ú8 21 25 10 7 Ú8 4 1 Ú8For over 90 years,American journeymenand apprenticeshave made Kennedythe machinist’s toolbox of choice.Handed down fromfather to son, fourgenerations of American craftsmenknow Kennedy quality and durability.MC226205263611515052052611MC28

2705X or 2905XMechanics’ Chests5-DRAWERBALL-BEARING SLIDES2705X 2905XNew full-depth chests store a variety of tools.Model 2705X fits on 27” wide cabinets;model 2905X fits on 29” wide cabinets.Both models have snap-in ball-bearing slides.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2705X 00650 00651 5 27 18 18 3 Ú8 88 96Top Till 26 7 Ú8 17 3 Ú4 2 5 Ú8Drawers: 4 23 16 1 Ú2 21 23 16 1 Ú2 42905X 00654 00655 5 29 20 18 3 Ú8 100 109Top Till 28 7 Ú8 19 3 Ú4 2 5 Ú8Drawers: 4 25 18 1 Ú2 21 25 18 1 Ú2 426-INCH28-INCH360 2812Right at home in a plant or auto maintenance bay.Top till holds lift-out tray equipped with socket set divider.Model 360 fits on 27” or 29” wide roller cabinets; model 2812 fitson 29” or 34” wide cabinets. Both available with friction slides only.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.360 00078 10289 10 26 1 Ú8 12 1 Ú16 18 7 Ú8 68 75Top Till 26 11 7 Ú8 2 5 Ú8Tote Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8Drawers: 1 6 7 Ú8 10 3 Ú4 6 1 Ú46 6 7 Ú8 10 3 Ú4 22 22 7 Ú8 10 3 Ú4 21 22 7 Ú8 10 3 Ú4 32812 28122 28121 12 28 5 Ú8 12 18 7 Ú8 71 78Top Till 26 11 7 Ú8Tote Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8Drawers: 9 8 5 Ú8 10 3 Ú4 22 26 3 Ú8 10 3 Ú4 21 26 3 Ú8 10 3 Ú4 32812360266 or 280626-INCH 28-INCH266 2806The mechanic’s favorite chest for storage space and value.Top till with lift-out tray equipped with socket set divider.Model 266 fits on 27” or 29” wide roller cabinets; model 2806 fitson 29” or 34” wide cabinets. Both available with friction slides only.Choice brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.266 00048 10141 6 26 1 Ú8 12 14 3 Ú4 52 58Top Till 26 11 7 Ú8 2 5 Ú8Tote Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8Drawers: 3 6 7 Ú8 10 3 Ú4 22 22 7 Ú8 10 3 Ú4 21 22 7 Ú8 10 3 Ú4 32806 28062 28061 6 28 5 Ú8 12 14 3 Ú4 54 60Top Till 26 11 7 Ú8 2 5 Ú8Tote Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8Drawers: 3 8 5 Ú8 10 3 Ú4 22 26 3 Ú8 10 3 Ú4 21 26 3 Ú8 10 3 Ú4 319Industrial Series

Industrial Series2026032600285 or 285X2805 or 2805X2632902 or 260226045-DRAWER 5-DRAWERFRICTION SLIDES BALL-BEARING SLIDES285 2805 285X 2805XFull-width drawers store and organize extra-long tools.Model 285 fits on 27” wide roller cabinets and has snap-in frictionslides; model 2805 fits on 29” wide cabinets and has snap-in frictionslides. Model 285X fits on 27” wide roller cabinets and has snap-inball-bearing slides; model 2805X fits on 29” wide cabinets and hassnap-in ball-bearing slides.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.285 00050 10329 5 27 18 16 5 Ú8 75 84Drawers: 4 23 16 1 Ú2 21 23 16 1 Ú2 4285X 00600 00601 Same dimensions as 285 80 892805 28052 28051 5 29 20 16 5 Ú8 87 96Drawers: 4 25 18 1 Ú2 21 25 18 1 Ú2 42805X 00602 00603 Same dimensions as 2805X 92 1013-DRAWER—263Drawers lock automatically when the lid is closed. Double lid stayssafely hold lid open.Top till holds lift-out tray equipped with socketset divider. Available in snap-in friction slides only.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.263 00044 10422 3 26 1 Ú8 12 14 3 Ú4 44 50Top Till 26 11 7 Ú8 2 5 Ú8Tote Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8Drawers: 1 23 10 3 Ú4 21 23 10 3 Ú4 31 23 10 3 Ú4 4Add-On Bases26-INCH2602 2603 260429-INCH2902Use 2602, 2603 and 2604 with 263, 266 and 360 chests, and 27”, 29” or34” roller cabinets.Model 2902 accommodates models 2812 and 2806 chests, and 29” or34” roller cabinets.All available in snap-in friction slides only.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.2602 26022 26021 2 26 5 Ú8 12 1 Ú2 11 3 Ú4 30 40Drawers: 2 22 7 Ú8 10 3 Ú4 4 1 Ú82603 26032 26031 3 26 5 Ú8 12 1 Ú2 11 3 Ú4 33 43Drawers: 2 22 7 Ú8 10 3 Ú4 21 22 7 Ú8 10 3 Ú4 4 1 Ú82604 26042 26041 4 26 3 Ú4 12 1 Ú2 11 3 Ú4 35 45Drawers: 4 22 7 Ú8 10 3 Ú4 22902 29022 29021 2 28 3 Ú4 12 1 Ú2 11 3 Ú4 36 46Drawers: 2 24 7 Ú8 10 3 Ú4 4 1 Ú8Chest Riser—2600Add storage and work surface to your roller cabinet. Use with 263, 266and 360 chests, or 2602, 2603 and 2604 chest bases.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Width Depth Height Lbs. Lbs.2600 26002 26001 26 5 Ú8 12 1 Ú2 11 3 Ú4 9 19

Cantilever Tool Boxes18 INCH 22 INCH1018 1022You’ll like the way each opens to see all your tools at a glance.Movable/removable partitions and divider sets permit you tocreate six compartments in each of two trays.Quality plated locking hardware and steel core, vinyl cushionedhandles make these boxes a pleasure to own and use.Model 1022 has divider for storing socket sets.Brown wrinkle powder finish.Brn. Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Trays Width Depth Height Lbs. Lbs.1018 00026 4 18 1 Ú8 10 12 5 Ú8 18.25 19.51022 00027 4 22 1 Ú8 10 12 5 Ú8 21 22.510181022Professional Tool Boxes20 INCH 24 INCH 32 INCHK20 K24 K32XInclude lift-out tray, vinyl coated, steel top handle.K20 and K24 trays have socket set divider.Model K32X also has plated side carry handles.Brown wrinkle powder finish.Brn. Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Width Depth Height Lbs. Lbs.K20 00031 20 1 Ú8 8 5 Ú8 9 3 Ú4 13 14Tray 19 1 Ú2 7 3 Ú4 3 3 Ú8K24 00032 24 1 Ú8 8 5 Ú8 9 3 Ú4 14.5 16Tray 23 1 Ú2 7 3 Ú4 3 3 Ú8K32X 00033 32 1 Ú8 8 5 Ú8 9 3 Ú4 18 20Tray 31 3 Ú8 4 3 Ú4 1 5 Ú8Has two compartmentsTool Toters20 INCH5220Great for storing the tools you need for thecar, boat, pickup or your household.Brown wrinkle powder finish with lift-out tray.Brn. Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Width Depth Height Lbs. Lbs.5220 05220 20 7 1 Ú8 7 1 Ú4 9 10Tray 19 7 Ú8 6 3 Ú8 4For the Do-It-Yourselfer2-DRAWER 5-DRAWER220 Chest 2005 Roller CabinetModel 220 can be paired with model 2005 cabinet for handy homecombo. Or, think of it as a tool chest you can take on the job or on a trip.Model 2005 can also be used with 620 or 520 machinists’ chests. Hastamper-proof, internal drawer locking system. Comes with four threeinchswivel casters.Choice of brown wrinkle or smooth red powder finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. Drs. Width Depth Height Lbs. Lbs.220 00083 10427 2 20 1 Ú8 8 5 Ú8 9 3 Ú4 17 19Top Till 20 8 3 Ú8 2 1 Ú4Drawers: 2 18 1 Ú4 7 3 Ú8 2 1 Ú42005 10410 10411 5 20 1 Ú2 13 5 Ú8 32 7 Ú8 70 78Drawers: 1 17 1 Ú2 12 1 Ú4 23 17 1 Ú2 12 1 Ú4 41 17 1 Ú2 12 1 Ú4 10K20 or K2422020055220K32X220closed21Hand Carry Tool Boxes

KenCraft Chests, Cabinets, Gun Cabinets, Reloading Bench22275KC284KC285KC273KC276KC283KCMedium Duty Chests and CabinetsLighter weight but sturdy enough to hold your most used tools.Come with snap-in friction slides, standard lock and side handles.Black wrinkle finish with smooth red drawers.BlackNet ShipUPC Dimensions (Inches) Wt. Wt.No. No. Drs. Width Depth Height Lbs. Lbs.283KC 00827 3 27 18 16 5 Ú8 69 78Drawers: 3 23 16 1 Ú2 4284KC 00828 4 27 18 16 5 Ú8 71 80Drawers: 2 23 16 1 Ú2 22 23 16 1 Ú2 4285KC 00829 5 27 18 16 5 Ú8 75 84Drawers: 4 23 16 1 Ú2 21 23 16 1 Ú2 4BlackNet ShipUPC Dimensions (Inches) Wt. Wt.No. No. Drs. Width Depth Height Lbs. Lbs.273KC 00833 3 27 18 35 99 110Drawers: 2 23 16 1 Ú2 41 23 16 1 Ú2 6275KC 00834 5 27 18 35 110 121Drawers: 3 23 16 1 Ú2 22 23 16 1 Ú2 4Compartment 24 1 Ú8 17 3 Ú4 11 1 Ú4276KC 00835 6 27 18 35 112 123Drawers: 1 23 16 1 Ú2 24 23 16 1 Ú2 41 23 16 1 Ú2 6KenCraft Home Security Cabinets and Reloading Bench1501 10-Gun Cabinet• Holds 10 shotguns orrifles up to 53” long.• 21 1 Ú2 x 13 5 Ú8 x 55”H.Model 520See page 19Reloading suppliesnot included.1510 5-Gun Cabinet• Holds 5 shotguns orrifles up to 51” long.• 13 1 Ú2 x 9 x 52”H.1550 Deluxe Reloading Bench• Comes with 1 1 Ú2” thick butcherblock maple work surface54” x 20”.• Compartment has two shelves.• Five 4” drawers store reloadingsupplies.• Adjustable leg levelers.• Assembly required.• Black wrinkle finish, smoothred drawers.1500 10-Gun Cabinet• Holds 10 shotguns orrifles up to 54” long.• 20 1 Ú4 x 13 5 Ú8 x 55”H.1530 Add-On Cabinet• Fastens to 1500 or1520 gun cabinets.• Includes one adjustableshelf and mountinghardware.• 20 1 Ú4 x 13 5 Ú8 x 18”H.1520 14-Gun Cabinet• Holds 14 shotguns orrifles up to 54” long.• 20 1 Ú4 x 18 x 55”H.1547 Pistol Box• Foam liner protectshandguns from scratches.• Individual units will stackand fasten together.Hardware included.• 8 3 Ú4 x 7 3 Ú16 x 13 1 Ú8”H.For your free KenCraft brochure call 1-800-413-8665 or e-mail us at kmcinfo@kennedymfg.com

Portable Parts StorageSteel briefcase-style storage case has variety of compartments tohold small parts. Choose from plastic box inserts or vacuum-formedone-piece insert.Foam-lined lid prevents parts from spilling when lid is closed. Doublelatches keep lid closed securely. Comfortable, vinyl-cushioned steelcore handle.Brown wrinkle powder finish.Brn. Net ShipUPC Dimensions (Inches) Wt. Wt.No. No. Comp. Width Depth Height Lbs. Lbs.12008 12008 8 17 3 Ú8 14 2 3 Ú4 8.1 9.1Box Size: 8 4 1 Ú4 6 3 Ú8 2 3 Ú812012 12012 12 17 3 Ú8 14 2 3 Ú4 8.3 9.3Box Size: 12 4 1 Ú4 4 1 Ú4 2 3 Ú812023 12023 23 17 3 Ú8 14 2 3 Ú4 8.3 9.3Box Size: 12 2 1 Ú8 2 1 Ú8 2 3 Ú86 2 1 Ú8 4 1 Ú4 2 3 Ú83 4 1 Ú4 4 1 Ú4 2 3 Ú82 4 1 Ú4 6 3 Ú8 2 3 Ú812024 12024 24 17 3 Ú8 14 2 3 Ú4 8.3 9.3Box Size: 24 2 1 Ú8 4 1 Ú4 2 3 Ú812036 12036 36 17 3 Ú8 14 2 3 Ú4 8.4 9.4Box Size: 24 2 1 Ú8 2 1 Ú8 2 3 Ú812 2 1 Ú8 4 1 Ú4 2 3 Ú812108 12108 8 17 3 Ú8 14 2 3 Ú4 7.6 8.6Insert Comp. Size: 6 4 3 3 Ú4 2 1 Ú21 7 7 Ú8 4 2 1 Ú21 16 1 Ú4 3 3 Ú4 2 1 Ú212112 12112 12 17 3 Ú8 14 2 3 Ú4 7.6 8.6Insert Comp. Size: 12 3 3 Ú4 4 2 1 Ú2Convenient—Toolholder system allows hundreds of items to beorganized, stored and displayed where they are easy to find—nothidden away in a crowded drawer or cabinet. The melamine finishwhite hardboard panels are easily cleaned with a wipe of a cloth.Space-saving—Eliminate clutter by turning unused walls intouseful storage space.Versatile—Modular system lets you design to fit your needs andeasily make changes. Panels can be securely fixed to any wallsurface and can be cut to fit small or irregular wall spaces.Tools not includedSet No. 85532 Contents:• (4) ea. 24" x 24" Square-hole panels• Anchor Set—(16) anchors, (16) spacers• (30) Universal Brackets• (44) Assorted Hooks, Clips, Fasteners• (1) Cord Holder• (2) ea. Wrench Rack• (2) ea. Screwdriver Rack• (2) ea. Ring Hook120081202412023Economy Square HoleToolholder SystemSet No. 85570 Contents:• (2) ea. 18" x 36" panels• Fasteners• (15) Universal Brackets• (20) Assorted Hooksand Clips• (1) Cord Holder• (1) Wrench Rack• (1) Screwdriver Rack• (1) Ring HookSecureSquareHoleDesign3Ú16" ThickPanelTwo full-width load-bearingsurfaces per attachment offermany times the strength ofordinary round-hole pegboard.Industrial Grade Wall AnchorsUse with anywall surface.12108120121203612112StrongUniqueUniversal Bracket"Hooks won't fall out!"Fits securely into panel squareholes. Hooks and clips fastentightly to brackets.Set No. 85570—designed to attach to Kennedyworkstations on page 28 (using two No. 50050panel brace supports shown on page 30) andtoolboard trolley base No. 50100 shown on page32. Trolley base will accommodate (2) 85570 sets.23Portable Parts Storage & Toolholder System

Tool Storage AccessoriesReplacement and add-on items for your Kennedy tool boxes, chests, roller cabinetsand work stations. Some of our most popular tool storage accessories are shownbelow. For your free copy of our Tool Storage Accessory Catalog, call ustoday at 1-800-413-8665 or e-mail us at kmcinfo@kennedymfg.com. Visitour website at www.kennedymfg.com.Tool Storage Accessories2480844 80840 80843 80403 80401 80402Standard Cylinder Lock/Key Sets• Key your chest and cabinet alike. Kennedyuses 350 lock and milled key changes foradded tool protection.• All locks can be keyed alike.(Padlock not included)Multi-Lock Security Lock Bar• Folds over cabinet drawers and locks withpadlock.• Easily attaches to tool boxes.• Comes with sheet metal screws and instructions.Chest/Cabinet Foam Drawer Liner• Helps protect tools from moisture and keepsthem in place.• Polyethylene foam 1 Ú16 inches thick.Tubular Key High Security Lock Sets• The type of lock found in many coinboxes, vending machines, pay phones, etc.• Seven pin tumbler cylinder construction.• All locks can be keyed alike.Chest/Cabinet Non-Slip Drawer Liner• Non-slip, open weave drawer liner keeps tools in place.• Polyester fabric coated with PVC.• Washable, anti-fungus and mildew-proof.Chest/Cabinet Foam Tool Organizer• Notice missing tools at a glance.• 3/8” thick foam can be cut with a hotpencil-tip soldering iron.

Ball-bearing Drawer Slides• Three-member, full extension ball-bearingslides permit effortless, feather-lightmovement.• Package includes one left and one righthand slide.Cabinet Top Mat• Protects against scuffs and abrasions.• Reduces chest movement.• Black vinyl pre-cut mat .075 in. thick.Maple Work Surface• 1 1 Ú2” thick butcher block maple top.• Full-length laminations speciallyselected for grain and color match.• Kitchen counter quality for yearsof fine use.• Comes with care instructions.Drawer Dividers• Keeps tools separated and organized.• Fully adjustable. Spring clips hold inplace. Made of zinc coated steel.ABS Drawer Divider Inserts for 27”, 29” and 34” Roller CabinetsOrganize, separate and arrange tools and small parts. Maximizes the use of drawer space,giving you quick access to contents. No more cluttered, messy drawers.Roller Cabinet Caster Sets• Soft rubber tread, hard rubber corebonded to metal center.• For cabinets 20, 27, 29 or 34 in. wide.• Tough ABS Black Plastic.• All compartments have rounded cornersfor quick, easy retrieval of small parts andeasy cleaning.• One-piece design for 27”and 29” cabinets—easy to use, drop-in, lift-out!Sized to fit Kennedy 2” and 4” high drawers in both 27” and 29” wide rollercabinets, maintenance cart models 310X and 315X and chest models 2705Xand 2905X.6 x 2”Roller Cabinet Caster Set• 6 x 2” roller bearing casters made ofblack polypropylene tread moldedto polypropylene core.• Swivel casters have lock brake thatlocks both wheel and swivel.Touch-up Paint• For touching up nicksand scratches.• Durable textured wrinkleor smooth finish.• Twelve ounce aerosol canor 0.6 ounce liquid bottle.25Tool Storage Accessories

48” Industrial MobileVersa-Bench ®with Ball-BearingDrawer SlidesSpecifications• All models have a 1 Ú8” steel work surface.• Frame and body constructed of 11 gauge steel.• Four 8 x 2” roller bearing phenolic wheels.• Comes standard with floor lock and tubularend handle.• All models have pad-lockable doors. Model 4806also includes lock and two keys in drawer unit.• Load capacity of 3600 lbs. Add two casters andincrease weight capacity to 5400 lbs.4-DRAWER4804Comes with four drawers and doors that can be padlocked for extrasecurity. Two open shelves on back allow fast and easy tool access.Versa-Benches®48044804,4806Back View48064810Tow your Versa-Benchto the job. Power towingcasters and bottompan reinforcementsbolt easily to base ofbench. Steel wheelshave molded-on softrubber, shock absorbent tread; tapered roller bearings. Comeswith two rigid, two swivel casters with poly cam brakes anda 27” towing tongue. Inside diameter of the towing ring is2 3 Ú4 inches; outside diameter is 4 1 Ú16 inches.Brown finish only.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.4804 10127 — — 4 48 26 35 7 Ú8 345 375Drawers: 2 23 16 1 Ú2 22 23 16 1 Ú2 4Top Front Compartment: 20 3 Ú4 19 12 3 Ú8Bottom Front Compartment: 48 19 11Back Open Shelves: 48 5 1 Ú2 136-DRAWER4806Six drawer unit comes with lock and two keys. Doors can bepadlocked for extra security. Also has two open shelves on back.Choice of brown or smooth red finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.4806 10128 4806R 10152 6 48 26 35 7 Ú8 395 425Drawers: 3 23 16 1 Ú2 22 23 16 1 Ú2 41 23 16 1 Ú2 5Top Front Compartment: 17 1 Ú2 19 12 1 Ú8Bottom Front Compartment: 17 1 Ú2 19 11Back Open Shelves: 48 5 1 Ú2 1310-DRAWER4810Comes with ten drawers and doors that can be padlocked for security.Choice of brown or smooth red finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.4810 10240 4810R 10241 10 48 26 35 7 Ú8 500 530Drawers: 2 30 23 1 Ú2 1 3 Ú43 30 23 1 Ú2 43 12 23 1 Ú2 1 3 Ú41 12 23 1 Ú2 101 43 7 Ú8 23 1 Ú2 5 3 Ú8For the maintenance mechanicwhose work comes to him.Replace bench casters withstationary, steel formed legs.Mount in corners using sameholes as casters. Height 9 1 Ú4 in.26VBT48—UPC No. 10133—For 48” ModelsVBT60—UPC No. 10134—For 60” ModelsVBLEGS—Brn. UPC No. 00077Red Smooth UPC No. 00084

Specifications• All models have a 1 Ú8” steel work surface.• Frame and body constructed of 11 gauge steel.• Four 8 x 2” roller bearing phenolic wheels.• Comes standard with floor lock and tubularend handle.• All models have pad-lockable doors. Six andtwelve drawer models also include lock andtwo keys in drawer units.• Load capacity of 3600 lbs. Add two castersand increase weight capacity to 5400 lbs.60” Industrial MobileVersa-Bench ®with Ball-BearingDrawer Slides6-DRAWER6006Comes with six-drawer cabinet equipped with lock and two keys. Opencompartment behind cabinet. Rear doors cover two-shelf storage spaceand can be padlocked for exta security.Choice of brown or smooth red finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.6006 10129 6006R 10296 6 60 7 Ú8 32 35 7 Ú8 450 475Drawers: 3 23 16 1 Ú2 22 23 16 1 Ú2 41 23 16 1 Ú2 5Top Front Compartment: 27 1 Ú4 28 1 Ú2 12 1 Ú8Bottom Front Compartment: 27 1 Ú4 28 1 Ú2 11Back Open Compartment: 28 1 Ú2 9 1 Ú4 266006 and6012SBack View600612-DRAWER6012STwo six-drawer units come with keyed alike lock and two keys. Reardoors cover two-shelf storage space and can be padlocked for extrasecurity. Also has rear compartment for storing extra-large tools.Choice of brown or smooth red finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.6012S 10130 60SR 10153 12 60 7 Ú8 32 35 7 Ú8 500 525Drawers: 6 23 16 1 Ú2 24 23 16 1 Ú2 42 23 16 1 Ú2 5Top Back Compartment: 27 10 5 Ú8 10Bottom Back Compartment: 27 10 5 Ú8 13 1 Ú2Back Open Compartment: 29 9 5 Ú8 2612-DRAWER6012EComes with two six-drawer units with keyed alike lock and key sets. Sideopenings have shelves and doors that can be padlocked for extra security.Choice of brown or smooth red finish.Brn. Red Net ShipUPC UPC Dimensions (Inches) Wt. Wt.No. No. No. No. Drs. Width Depth Height Lbs. Lbs.6012E 10131 6012ER 10138 12 60 7 Ú8 32 35 7 Ú8 510 535Drawers: 6 23 16 1 Ú2 24 23 16 1 Ú2 42 23 16 1 Ú2 5Top Compartment: 20 28 1 Ú2 9 3 Ú4Bottom Compartment: 20 28 1 Ú2 13 1 Ú2StandardFloor Lock.Fits allVersa-Benchmodels.All models comewith 8 x 2”rollerbearing phenolicwheels.Weight capacity,900 lbs. ea.6012S6012EProtect yourVersa-Benchwork surface.Durable, 1 1 Ú2”thick maple top has full-length laminations speciallyselected for grain and color match. Comes withwood screws, template and easy-to-read installationinstructions.WT48—UPC No. 00140—47 7 Ú8 W x 25 7 Ú8 D x 1 1 Ú2”H.WT60—UPC No. 00141—60 5 Ú8 W x 32 D x 1 1 Ú2”H.27Versa-Benches®

All five-drawer units have two deep shelves to neatlyorganize your tools. Legs adjust to make your workstations level on the roughest floor. Assembly required.Gray wrinkle powder finish.Quality butcher block maple work surface is 1 1 Ú2” thick.Steel top made of heavy gauge steel. Gray wrinklepowder finish.Heavy Duty Work Stations28WS5405S5405XWW5410W5410XTen drawer units have same specificationsas five drawer units except: No shelves.Work Station Components5-Drawer10-DrawerTop Wood Steel Wood SteelFrictionSlides WW5405 WS5405 WW5410 WS5410Ball-bearingSlides W5405X S5405X W5410X S5410XSpecificationsUPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Drs. Width Depth Height Lbs. Lbs.WW5405 10271 5 54 20 34 1 Ú2 132 152W5405X 00630 Same dimensions as WW5405 137 157WS5405 10273 5 54 20 34 1 Ú2 139 156S5405X 00631 Same dimensions as WS5405 144 161WW5410 10272 10 54 20 34 1 Ú2 177 212W5410X 00632 Same dimensions as WW5410 187 222WS5410 10274 10 54 20 34 1 Ú2 186 209S5410X 00633 Same dimensions as WS5410 196 219Drawer DimensionsModel No. Drawers Length Width HeightWW5405/WS5405 5 17 1 Ú2 16 1 Ú2 4W5405X/S5405XShelves (2) 17 5 Ú8 17 1 Ú2WW5410/WS5410 10 17 1 Ú2 16 1 Ú2 4W5410X/S5410XWork Station Security Door26-INCHDO26Package includes security door, mounting hardware and locking clip.Can be mounted for left or right opening and locked with a padlock(not included).Fits all 54” work stations and tool stand models TS261X and TS265X.UPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Width Depth Height Lbs. Lbs.DO26 10285 19 3 Ú45Ú8 20 7 Ú8 10 12Square 1 Economy Toolholder System eliminates clutterand utilizes space above your work station!See page 23 for details!Model Base Net Ship Maple Top Net Ship Steel Top Net Ship Drawer Packages Net Ship TotalNo. Unit Wt. Wt. WT54 Wt. Wt. ST54 Wt. Wt. DR265 Wt. Wt. No.CartonsWW5405 W54 35 41 1 40 47 1 47 54 3WS5405 W54 35 41 1 47 51 1 47 54 3WW5410 W54 35 41 1 40 47 2 94 108 4WS5410 W54 35 41 1 47 51 2 94 108 4W5405X W54 35 41 1 40 47 1 47 54 3S5405X W54 35 41 1 47 51 1 47 54 3W5410X W54 35 41 1 40 47 2 94 108 4S5410X W54 35 41 1 47 51 2 94 108 4

Chip Tray Work Station1558Made of heavy duty 11 gauge steel, this work station top is designedfor use with drill presses, lathes and milling machines. 1 1 Ú4” raised edgescontain metal cuttings. Surface drain hole allows the use of grindingfluids. Holds machines up to 650 lbs. Smooth gray finish.Five-drawer work station base comes with two shelves to organize bulkytools. Legs adjust to make your work station level on the roughest floor.Assembly required. Gray wrinkle powder finish.UPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Width Depth Height Lbs. Lbs.1558 01558 54 20 35 1 Ú4 199 221Drawers: 17 1 Ú2 16 1 Ú2 4Heavy Duty Tool Stands1-DRAWER 5-DRAWERBALL-BEARING SLIDESTS261X TS265XLegs adjust to make your work station level on uneven floors. One-inchthick press board work surface. Designed to accommodate additionaldrawers. Assembly required.Gray wrinkle powder finish.UPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Drs. Width Depth Height Lbs. Lbs.TS261X 00642 1 26 20 33 1 Ú2 62 71Drawers: 17 1 Ú2 16 1 Ú2 4Shelf 17 5 Ú8 17 1 Ú2TS265X 00643 5 26 20 33 1 Ú2 95 108Drawers: 5 17 1 Ú2 16 1 Ú2 4Add-on Drawer PackageFRICTIONBALL-BEARINGSLIDESSLIDESDR265 DR264X DR265XEasy-to-install 5-drawer package includes side panels, drawer slidesand mounting hardware. Four drawer package comes with drawerslides.Fit all 54” work stations and Tool Stands. Gray wrinkle powder finish.UPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Drs. Width Depth Height Lbs. Lbs.DR264X 00646 Same dimensions as DR264 33 36.5DR265 10263 5 17 7 Ú8 17 7 Ú8 20 1 Ú2 47 54DR265X 00640 Same dimensions as DR265 52 59Wall Storage CabinetWC28Wall cabinet has two adjustable shelves and two doors with perforatedinside panels that accommodate standard pegboard hooks. Doors areheld closed by magnets and have outside staples for securing with apadlock (not included). Mounting holes are 16 inches apart for easyfastening to wall studs (hardware included).1558TS261XDR265DR265XAvailable in gray wrinkle powder finish.Gray UPC Dimensions (Inches) Net Wt. Ship Wt.No. No. Width Depth Height Lbs. Lbs.WC28 10287 28 1 Ú8 9 5 Ú8 30 40 46Shelves (2) 28 6 WC283 Ú4TS265XDR264X29Heavy Duty Work Stations

Steel Toolboard SystemAll hooks lock into thepanel with the newplastic locking clip thatis quick and simple tolock-on or removeFour powder-coatedfinishes availableProfessional Tool StorageVersatile • Convenient • SecureToolboard Wall PanelsFlanged panels are reinforced for strengthto hold the heaviest loads. Panels can beattached to a variety of surfaces, racks,etc. (Fasteners not included). Each panelis 18" wide x 36" high. Order hooks andtoolholders in sets or individually.Toolboard panels come in tan, gray, greenand blue, durable chip-resistant, bakedon finish.Standard Two-Panel SetThe standard set consists of two 18 x 36"panels (covers 9 sq. ft. of wall space).Toolholders are not included and mustbe ordered separately.UPC No. 50002........................Tan FinishUPC No. 50012 ......................Blue FinishUPC No. 50022......................Gray FinishUPC No. 50032 ..................Green FinishToolholder SetsHooks, clips, and toolholder accessories are industrial grade, zinc-plated heavy steel and lock on to panels to preventthe accidental removal of tools.Each 30-piece toolholder setconsists of:17 assorted single hooks;4 assorted double hooks;2 assorted plier hooks;4 assorted spring clips;1 each ring hook,screwdriver unitand wrench rack.Model 99852Louvered Panel SetsThe standard set consists of two metal 18” H x 36” L louveredpanels. The finish is durable baked powder coat. 160 lbs. weightcapacity per panel. Accepts plastic bins.Panels can be attached to a wall, to the back of a work benchor attached to a model 50100 Open Tool Trolley Base for mobileorganized bin storage.Model 50061: two panel set, tanModel 50062: two panel set, blueModel 50063: two panel set, grayModel 50064: two panel set, greenNet weight 17.5 lbs.Ship weight 20 lbs.Panel Brace SupportsBraces attach to work station and louvered or toolboard panels.Two brace supports are required per two panel set.Model 50050 includes one brace and mounting hardware.• Reinforced steel panels with square hole perforations• Heavy steel lock-on hooks, clips, accessories• Locate tools at the worksite—either open access or in locked cabinets(Tools not included).Four-Panel Kit with60-piece Toolholder SetThe standard set consists of four 18 x 36"panels (covers 18 sq. ft. of wall space).60-piece toolholder set included.UPC No. 50004 ........................Tan FinishUPC No. 50014........................Blue FinishUPC No. 50024 ......................Gray FinishUPC No. 50034 ....................Green FinishEach 60-piece toolholder setconsists of:33 assorted single hooks;9 assorted double hooks;4 assorted plier hooks;10 assorted spring clips;1 each ring hook,screwdriver unit, wrench rackand allen key unit.Model 9985350100 base with 50061panel set and plasticbins (not included). Work station with 50002panel set, two 50050 bracesand hooks (sold separately).Tools not included.3050050Two 50050 brace supportswith panel set 50061.Close-up view oflouvered panel.

Bright, zinc-plated heavy steel toolholders won't come off when toolsare removed. Positive-lock system secures toolholders in place anywhereon panels.Single Hook—Vertical EndUPC Pkg. Wt.No. Qty. Length Dia. Cap.99820 10 1 1Ú4 40 lbs.99821 10 2 1Ú4 40 lbs.99822 10 3 1Ú4 40 lbs.Double Hook—Angled EndUPC Pkg. Wt.No. Qty. Length Width Cap.99829 10 2 1 40 lbs.99830 10 4 1 40 lbs.Single Spring ClipsUPC Pkg. Wt.No. Qty. Dia. Cap.99833 10 1Ú2 3 lbs.99835 10 3Ú4 3 lbs.99836 10 1 3 lbs.Parts ShelfGray finish.UPC Pkg. Wt.No. Qty. Length Depth Cap.99846 1 17 3 Ú4 6 3 Ú4 40 lbs.Screwdriver UnitStores up to 12 screwdrivers,chisels, files, etc. Gray finish.UPC No. Pkg. Qty. Wt. Cap.99840 1 40 lbs.Single Hook—Angled EndUPC Pkg. Wt.No. Qty. Length Dia. Cap.99823 10 2 3 Ú81Ú4 40 lbs.99824 10 4 1Ú4 40 lbs.99825 10 6 1Ú4 20 lbs.Plier HookUPC Pkg. Wt.No. Qty. Length Width Cap.99831 10 1 3 Ú83Ú4 40 lbs.99832 10 2 1 Ú83Ú8 40 lbs.Wrench RackStores up to 8 wrenches.Gray finish.UPC Pkg. Wt.No. Qty. Cap.99841 1 40 lbs.Plastic Bin Storage StripGray finish.UPC Pkg. Wt.No. Qty. Length Cap.99847 1 4 40 lbs.99848 1 17 3 Ú4 40 lbs.Double Hook—Vertical EndUPC Pkg. Wt.No. Qty. Length Width Cap.99827 10 1 1 3 Ú8 40 lbs.99828 10 2 1 3 Ú8 40 lbs.Ring HookUPC Pkg. Wt.No. Qty. Dia. Cap.99839 2 2 3 Ú8 40 lbs.Allen Key UnitStores up to 9-piece metric orimperial key set. Gray finish.UPC No. Pkg. Qty. Wt. Cap.99842 1 3 lbs.Cable Loop Hook SetUPC Pkg. Wt.No. Qty. Length Cap.99876 5 6 20 lbs.31Toolboard Lock-on Steel Tool Holders

Steel Toolboard System32Any of the toolholders on page 31may be used with these cabinets.50301Tools not included.No. 50308 light optional.Drawer Divider Kits for Mini Workshop CabinetModel No. 69050—9 compartment metal divider kit.Model No. 69051—20 compartment metal divider kit.10350501025026050100Wall Mounted CabinetsRugged steel cabinets with three-point locking doors combine easyaccess and convenient tool storage with security. Square hole perforatedcabinet back and inner door panels give large tool hanging capacity.Tan finish. Two keys included. Overall size: 44 9 Ú16 W x 11 13 Ú16 D x 39 3 Ú8"H.Model 50260 (shown)Comes with 24" x 18" swing-out inner panels for additional storage offlat tools. Sixty-piece toolholder set no. 99853 is included.Net wt. 100 lbs. Ship weight 120 lbs.Model 50230Comes without the swing-out inner panels. Thirty-piece tool holder setno. 99852 is included.Net wt. 83 lbs. Ship weight 96 lbs.Mini Workshop Cabinet• Heavy gauge welded steel.• Three-point locking doors with two keys.• Full-length toolboard panels on inner doors.• Two 18 x 36" toolboard panels install on cabinet back.• One adjustable full-width shelf: 35 7 Ú8 x 19 5 Ú8" with 220 lb. capacity.• Three full-width drawers: 34 5 Ú8 x 17 3 Ú8 x 4" high with 165 lb. capacityglide easily on ball-bearing slides. (Optional Divider Kits available.)• Safety latch on drawers.• Easy pull drawer handles with label holders.• 1 1 Ú2" thick butcher block maple work surface: 36 x 20".• Baked-on tan finish.• Sixty-piece toolholder set no. 99853 is included.Any of the tool holders shown on page 31 mayalso be used.• Overall size: 39 1 Ú4 W x 23 1 Ú4 D x 76"H.• Net weight 463 lbs. Ship weight 478 lbs.Model 50301Mini Workshop LightFor use in model 50301Mini Workshop Cabinet.Model 50308All Welded Storage Cabinet• Made of heavy 16 gauge steel.• Three-point locking system ensures maximum security.• Three shelves 36” x 21” x 1 3 Ú4” hold up to 400 lbs. each.• Steel toolboard panels inside doors include 20-piece hook set.• Overall dimensions: 39 1 Ú4 W x 23 1 Ú4 D x 76”H.• Tan finish.• Net Wt. 405 lbs. Ship Wt. 430 lbs.Model 10350The products shown on this page are available in standardtoolboard colors—tan, gray, green and blue. Delivery timeis approximately six weeks.Open Tool TrolleyAll-steel trolley is double sided with inclined panels to ensure tools aresafely stored when the trolley is moving. The base has raised edges foreasy storage of tool boxes and larger items. Mounted end handle andfour 5 x 1 1 Ú4” casters. Includes four 18" x 36" toolboard panels and 60-piece toolholder set no. 99853 shown on page 30. All toolholders shownon page 31 are also compatible. Overall size: 36 3 Ú4 W x 23 7 Ú8 D x 51 7 Ú8"H(includes casters). Assembly required. Tan finish.Model 50102. Net weight 86 lbs. Ship weight 90 lbs.Model 50104 includes base and four toolboard panels. Toolboard hooksand hook sets shown on pages 30 and 31 can be added to customizedyour tool storage requirements. Net weight 78 lbs. Ship weight 88 lbs.Model 50100 base only. Buy the base and add louvered panel sets(two sets) or one set of louvered panels and one set of toolboard panels(see page 30) for a combination trolley. Toolboard hooks and hook setsshown on pages 30 and 31 can also be added.Net weight 43 lbs. Ship weight 48 lbs.

Stainless Steel Roller Cabinets• 304 Stainless body and drawers,#4 Brushed finish• Ball bearing drawer slides, 125 lbs. drawer capacity• 5 x 1 1 Ú2" non-marking polyurethane casters• Stainless steel drawer pulls, handle and hardware• Tubular key high security lock and key setStandard Stainless Steel CabinetsClass 100—Cleanroom CertifiedNet ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.28085 5 29 20 35 125.5 141Drawers: 1 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 1028087 7 29 20 35 144.5 156Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 6Stainless Steel Cabinets with Pushbutton Combination LockClass 10—Cleanroom CertifiedNet ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.28197 7 29 20 35 144.5 156Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 25 18 1 Ú2 6Painted Cabinet Features• Designed for clean room environments wheresmooth painted surfaces are acceptable• Cabinet body of 18 and 16 gauge steel construction• Drawers of 20 gauge steel construction• Ball bearing drawer slides, 125 lbs. drawer capacity• 5 x 1 1 Ú2" non marking polyurethane casters• Stainless steel drawer pulls, handle and hardware• Tubular key high security lock and key set• Off-white powder coated polyester paint standard• ESD conductive epoxy paint finish availableNet ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.28077 7 29 20 35 146 171.5Drawers: 3 25 18 1 Ú2 23 25 18 1 Ú2 41 30 18 1 Ú2 1029077 7 34 20 40 180 205Drawers: 3 30 18 1 Ú2 23 30 18 1 Ú2 41 30 18 1 Ú2 10Cabinet Plastic Work Surface• Seamless, ABS white plastic cover fits snugly overroller cabinet top.• 3 Ú4" raised lip helps prevent roll offs.• For 29" cabinets ..................................Model No. 29000• For 34" cabinets ..................................Model No. 24000Standard Stainless Steel Chest Features• 304 Stainless body and drawers, #4 Brushed finish• Tubular key high security lock and key set• Model 28264 has stainless steel drawer pulls, handle andhardware. Ball-bearing drawer slides. Fits on top of cleanroomroller cabinet models 28085, 28087, 28195 and 28197.• Model 28220 comes with aluminum drawer pulls, and vinylcoated,steel core top handle. Stainless steel friction drawerslides.Net ShipUPC Dimensions (Inches) Wt. Wt.No. Drs. Width Depth Height Lbs. Lbs.28264 4 26 3 Ú4 12 1 Ú2 11 1 Ú2 40 45Drawers: 4 23 10 3 Ú4 228220 2 20 1 Ú8 8 5 Ú8 9 3 Ú4 16 19Drawers: 2 18 1 Ú4 7 3 Ú8 2Model 28085Packaging—All units are shippedin a non-staticgenerating bag toprevent contamination.Model 29077Pre-configured stainlesssteel cabinets shown.Or, custom design yourown. Ask us for details.Model 28197NOTE: Width is left to right, depth is front to back,height is top to bottom. Dimensions given do notinclude handles, but do include casters.Model 28264Model 29000Model 24000Model 2822033Cleanroom Chests & Roller Cabinets

Modular Storage SystemsModular Storage Systems34Your Quality, Cost-Efficient Alternative in Modular StorageCompare the bott/Kennedy Features & Benefits—Volume Capacitybott/Kennedy modular cabinets offermore volume capacity than ourcompetition. For example, our30" x 30" x 39.5" cabinet with 18 each2" drawers gives you 84.5 sq.ft. ofdrawer space in only 6.25 sq.ft. offloor space. The side-mounted railsincrease the storage volume by providing up to 15% more usabledrawer height than conventional carriage type slide systems.Plus, the larger size, 26" x 26", of our most popular drawers givesup to 17% more storage area than comparable drawers of thecompetition. The combination of rail design and drawer size cangive over 30% more total storage volume than competing brands,depending on the drawer arrangement used.Weight Capacitybott/Kennedy offers weight capacityof up to 550 lbs. per drawer, highest inthe industry. A 220 lbs. per drawersystem is also available. These systems,(FX) and (NX), are interchangeable,offering economy and the ability tomix and match different systems within the same cabinet dependingon your needs. Ball bearing rail construction ensures smooth,effortless operation, even when a drawer is fully loaded.Drawer ConstructionThe drawer pans of all cabinets areformed from heavy gauge steel andhave reinforced edges for strength,rigidity and safety. The bottom of thepan has perforations for partitioningflexibility. Divider slots on all four side walls are .79” (20mm) apart.FX—Full Extension Drawersbott/Kennedy FX drawers have a load capacity of 550 lbs.(250 kgs.) with 100% extension capability. Telescopic,side-mounted rails have a total of eight precision ballbearings per drawer (4 each side) to handle this enormousload capacity.Bott/KennedyIndependent telescoping side mounted rails = Maximum usable heightOthersCarriage type railing system = Lower usable heightNX—Normal Extension Drawersbott/Kennedy NX drawers have a load capacity of 220 lbs.(100 kgs.) with 87% extension capability. Side-mounted railshave four precision ball bearings per drawer (2 each side).NX drawers can be replaced with FX drawers wheneverload capacity requirements change.Changeable Drawer FrontsThe bott/Kennedy drawer frontbolts solidly to the drawer pan. Thispermits the simple and inexpensivechanging of drawer sizes at a laterdate if your needs change. Forexample, two 4" drawers canbecome a single 8" drawer by justpurchasing an 8" drawer front and bolting it on. FLEXIBILITYis the key word with the bott/Kennedy system.

Drawer Interlock Safety SystemMost bott/Kennedy cabinets have an "onlyone-drawer-open-at-a-time" safety system thatprevents tipping of the cabinet. There are alsofour bottom corner holes for anchoring the cabinetto the floor. Bolting cabinets to the floor is highlyrecommended to prevent personal injury.Corner Strengthening BracketAll of our cabinets have a super-tough cornerstrengthening bracket solidly welded into placeto ensure the maximum rigidity and strength thatyou would expect from a bott/Kennedy cabinet.Security Locking SystemAll bott/Kennedy cabinets have a high security locking system.Keyed alike and master key combinations are available upon request.2. All keyed alikeMaster Key SystemKeyed-alike cabinets can be included in the seriesindividual keys. . . . . . . . .NC/CNC TOOL STORAGE SYSTEMSIncrease Spindle TimeIncrease ProductivityOperators tell us they spend up to 25% of their day retrieving andassembling tooling.Reduce tooling retrieval and assembly time. Losses of $300 per houror more are common. Reducing a shop's total down time by just onehour per day can result in anaverage $75,000 per year inincreased productivity.Increase Tool LifeSusta/Kennedy componentskeep tooling and accessoriessecure and protected fromdamage and loss so oftenresulting from loose andrandom storage.Drawer Dividers and AccessoriesChoose from a large selection of standarddivider sets or custom design your drawerarrangement from components. A widevariety of boxes, trays and tool holdersare available for most efficient storage oftools and parts.Control InventoryCustom arrangement of trays, drawers and pull out frames allowslogical, organized storage of compatible tooling and supplies.Custom Designed CabinetsAlthough we offer many standard pre-engineered drawer arrangementsand drawer dividers sets, the bott/Kennedy system allows you the totalflexibility to design units to your exact specifications. If you needassistance, just call your bott/Kennedy representative. He can help witha wide range of storage solutions.Tooling and supply componentsare separated and visible. It iseasy to quickly see what is instock.Eliminate unnecessary rush ordersfor tooling that actually is in house,somewhere, out of sight.Cabinet Top MatsEvery bott/Kennedy cabinet top is coveredwith a ribbed black vinyl mat that protectsagainst scuffs and abrasions, and providesa durable work or storage surface.Save Floor SpaceIncrease the amount of expensive floor space available for productionmachinery by reducing storage space with high density Susta/Kennedystorage racks and work stations.Full-length Label HoldersDrawer handles come with paper and clear plastic label strips for fast, easyidentification of drawer contents. This means faster retrieval and quickinventory control.Color SelectionThere are four standard colors—tan, green, gray and blue.Call bott/Kennedy or your distributor to see actual color chips.Drawer fronts and housings may be the same or different colors.Special colors are available upon request.One Susta/Kennedy Ministore ® saves space by combining highdensity storage and work station in as little as 17 square feet.Susta/Kennedy products begin on page 5035

STANDARD WIDTH30" x 30" MODULAR CABINETSThe standard width cabinets on these pages are 30" wide x 30" deep and are ourmost popular size.30” x 30” Modular Cabinets36You may order cabinet housings filled with your own custom-designed drawerarrangements or choose from the pre-engineered combinations shown that haveproven to be the most widely used over the years.All models are shipped assembled and come with lock and two keys. Drawerdivider sets are shown on page 37. Additional accessories are on pages 46, 47and 48.Standard Width HousingsCabinet housings can be filled with full extension (FX), 550 lbs., ornormal extension (NX), 220 lbs., drawers. They can be mixed withinthese cabinets for cost efficient combinations.Select any combination of drawer front heights that equal the usableheight of the cabinet. NX drawers can be converted to FX drawers ata later date if storage requirements change. All 2" drawers are NXtype drawers.Drawers for all 30" x 30" cabinets are listed on page 37. Fork lift basesand pallet truck bases are available. See page 48 for information.Standard Width Pre-engineered Combinations59.5"19"36"39.6"36"30" 30"30" 30"Housing No. 63600 Housing No. 63400Usable Height 55" Usable Height 36"63405 NX 63407 NX 63409 NX 63411 NX 63416 NX 63418 NX63406 FX 63408 FX 63410 FX 63412 FX 63417 FX 63419 FX4-3", 1-4", 2-6", 4-4", 2-6", 1-8" Drs. 6-6" Drawers 2-4", 2-6", 2-8" Drs. 12-3" Drawers 1-2", 2-3", 4-4", 2-6" Drs.1-8" Drs. Total Sq. Ft. 32.86 Total Sq. Ft. 28.16 Total Sq. Ft. 28.16 Total Sq. Ft. 56.33 Total Sq. Ft. 42.25Total Sq. Ft. 37.75 Total Cu. Ft. 12.46 Total Cu. Ft. 12.66 Total Cu. Ft. 12.66 Total Cu. Ft. 11.46 Total Cu. Ft. 12.06Total Cu. Ft. 12.2663605 NX 63609 NX 63611 NX 63616 NX 63618 NX 63620 NX63606 FX 63610 FX 63612 FX 63617 FX 63619 FX 63621 FX5-3", 4-4", 2-5", 2-4", 1-5", 1-6", 2-4", 2-6", 1-7", 6-6" Drs. 5-3", 1-4", 12-3" Drs. 3-3", 1-4", 1-6", 2-3", 2-4",1-5",1-6", 1-8" Drs. 2-6", 2-8" Drawers Total Sq. Ft. 42.25 Total Sq. Ft. 84.49 3-4", 2-6", 1-12" Drs. 3-6", 1-8", 1-10" Drs.Total Sq. Ft. 61.02 Total Sq. Ft. 46.94 Total Cu. Ft. 12.38 Total Cu. Ft. 17.58 Total Sq. Ft.. 51.63 Total Sq. Ft. 46.94Total Cu. Ft. 18.50 Total Cu. Ft. 19.18 Total Cu. Ft. 18.98 Total Cu. Ft. 19.18Custom Designed CabinetsTo order custom designed 30" x 30" cabinets, use the housings shown above (#63400, 39.6"H; #63600, 59.5"H)and combine with the drawers for 30" x 30" cabinets listed on page 37. Remember, the combination of drawerfront heights must add up to the usable height of the housing.

30" x 30" MACHINE CABINETSAND WORK STATIONS30" x 30" Machine CabinetThis bott/Kennedy storage cabinet holds normal extension (NX) or fullextension (FX) drawers and can be used right at the machine site or as abase cabinet for work stations.31.7"28"Model 63303 overall dimensions are 30" x 30" x 31.7"H. Usable height is28". For other drawer arrangements, order housing no. 63300 and selectfrom drawers listed below. Inside drawer dimensions are 26" x 26".Standard drawer arrangement is (1) 4" FX drawer, (2) 6" FX drawersand (1) 12" FX drawer.76209 Socket PartitionEach drawer in housing no.62000 holds three partitions;63000 holds four partitions;64000 holds six partitions.Each partition will hold:(6) Susta 70053 50 Taper Sockets;(8) Susta 70051 40 Taper Sockets;(8) Susta 70059 30 Taper Sockets.Standard Width Drawers for all 30” x 30” CabinetsDrawer pans have perforations for easy installation of dividers and accessories. Drawer fronts bolt on to allow changing drawerheights easily as storage needs change. Inside dimensions of drawers are 26" x 26" giving 4.69 sq. ft. of storage area.NX drawers have 87% railextension; 220 lbs. capacity.FX drawers have 100% railextension; 550 lbs. capacity.0 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 330033669912121515181821212424273033330 3 6 9 12 15 18 21 24 27 30 33NX Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension63002 2" 1.46 37 1.38 35 .57 220 100 87%63003 3" 2.44 62 2.17 55 .95 220 100 87%63004 4" 3.43 87 3.35 85 1.34 220 100 87%63005 5" 4.41 112 3.35 85 1.72 220 100 87%63006 6" 5.39 137 3.35 85 2.11 220 100 87%63008 8" 7.36 187 3.35 85 2.88 220 100 87%FX Model #63103 3" 2.44 62 2.17 55 .95 550 250 100%63104 4" 3.43 87 3.35 85 1.34 550 250 100%63105 5" 4.41 112 3.35 85 1.72 550 250 100%63106 6" 5.39 137 3.35 85 2.11 550 250 100%63107 7" 6.38 162 3.35 85 2.49 550 250 100%63108 8" 7.36 187 3.35 85 2.88 550 250 100%63109 9" 8.35 212 3.35 85 3.26 550 250 100%63110 10" 9.33 237 3.35 85 3.65 550 250 100%63112 12" 11.30 287 3.35 85 4.42 550 250 100%63114 14" 13.27 337 3.35 85 5.18 550 250 100%63116 16" 15.24 387 3.35 85 5.96 550 250 100%27300 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 3330"30"Housing No. 63300Usable Height 28"NC/CNCWork StationDrawer Divider Sets for 30” x 30” CabinetsChoose any divider or box set below that meets your needs. To order, use the four digit number and add the number 2, 3 or 4 as asuffix. To order a divider set 9310 for a 2" drawer, order 93102, 93103 for a 3" drawer and 93104 for 4"-16" drawers. Taller subdividersand partitions are available on request. See pages 46 and 47 for drawer divider components and accessories.0 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 339310 9312 9313 9321 9322 9323 9324 93252 Comp. 6 Comp. 8 Comp. 6 Comp. 9 Comp. 12 Comp. 15 Comp. 18 Comp.13” x 26” 13” x 8.5” 13” x 6.25” 8.5” x 13” 8.5” x 8.5” 8.5” x 6.25” 8.5” x 4.75” 8.5” x 3/75”0 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 3300336699121215151818212124242727303033330 3 6 9 12 15 18 21 24 27 30 339333 9334 9335 9337 9342 9355 9364 937716 Comp. 20 Comp. 24 Comp. 32 Comp. 15 Comp. 36 Comp. 35 Comp. 64 Comp.6” x 6.25” 6” x 4.75” 6” x 3.75” 6” x 3” 4.5” x 8.5” 3.75” x 3.75” 3” x 4.75” 3” x 3”3730 x 30” Modular Cabinets

44" x 30" EXTRA WIDEMODULAR CABINETS44” x 30” Modular Cabinets38Extra wide cabinets are themost cost and space efficientmodular cabinets for centralizedlarge tool and parts storage.Choose from the pre-engineeredcombinations shown below thathave proven to be the mostwidely used over the years. Or,you may order cabinet housingsfilled with your own customdesigned drawer arrangements.Extra Wide Pre-engineered CombinationsHousing No. 64400Usable Height 36"Drawers and drawer divider setsare listed below. All models areshipped assembled and comewith lock and two keys.Additional accessories are onpages 46, 47 and 48. Fork liftbase and pallet truck base alsoavailable on page 48.Extra Wide HousingsExtra wide housings require fullextension (FX), 550 lbs. drawers.Select any combination of drawerfront heights that equal the usableheight of thecabinet.64404 64408 64410 64606 64608 646106-6" Drawers 6-3", 3-4", 1-6" Dr. 1-3", 2-4", 1-5", 2-6", 5-3”, 4-4”, 4-6” Drs. 2-3”, 2-4”, 1-5”, 2-6” 2-6”, 1-7”, 3-12” Drs.Total Sq. Ft. 43.50 Total Sq. Ft. 72.50 1-8" Drawer Total Sq. Ft. 94.25 3-8” Drs. Total Sq. Ft. 43.50Total Cu. Ft. 19.17 Total Cu. Ft. 17.59 Total Sq. Ft. 50.75 Total Cu. Ft. 27.75 Total Sq. Ft. 72.50 Total Cu. Ft. 43.50Total Cu. Ft. 18.73 Total Cu. Ft. 28.88Extra Wide Drawers for all 44” x 30” CabinetsHeavy-gauge, welded steel FX drawers are mounted on eight ball bearings for smooth operation under heavy loads.Inside dimensions are40.16" W x 26" D giving7.25 sq. ft. of storage space.39.6"30"36"44.3"59.5"19"36"30" 44.3"Housing No. 64600Usable Height 55"FX Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension64103 3" 2.32 59 2.00 50 1.40 550 250 100%64104 4" 3.31 84 3.35 85 1.99 550 250 100%64105 5" 4.29 109 3.35 85 2.59 550 250 100%64106 6" 5.28 134 3.35 85 3.18 550 250 100%64107 7" 6.38 162 3.35 85 3.85 550 250 100%64108 8" 7.24 184 3.35 85 4.37 550 250 100%64109 9" 8.35 212 3.35 85 5.04 550 250 100%64110 10" 9.21 234 3.35 85 5.56 550 250 100%64112 12" 11.18 284 3.35 85 6.75 550 250 100%64114 14" 13.15 334 3.35 85 7.95 550 250 100%64116 16" 15.12 384 3.35 85 9.12 550 250 100%Custom Designed CabinetsTo order custom designed 44" x 30" cabinets, use the housings shown above (#64400, 39.6"H; #64600, 59.5"H) and combine with thedrawers listed above. Remember, the combination of drawer front heights must add up to the usable height of the housing (19" &36"). (The smallest drawer front height available for extra wide cabinets is 3").Drawer Divider Sets for Extra Wide CabinetsChoose any divider set below that meets your needs. To order, use the four digit number and add the 3 or 4 as a suffix. To order adivider set 9532 for a 3" drawer, order 95323 and 95324 for 4"-16" drawer. Taller subdividers and partitions are available on request.See pages 46 and 47 for drawer divider components and accessories.0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51036912151821242730330 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 519521 9542 9544 9554 95646 Compartments 15 Compartments 25 Compartments 30 Compartments 35 Compartments13” x 13” 7.75” x 8.5” 7.75” x 4.75” 6.25” x 4.75” 5.5” x 4.75”03691215182124273033

30" x 24" Pre-engineered CombinationsAll drawers in these units are full extension (FX),550 lb. capacity.624072-3", 2-4", 1-6" & 2-8" Dr.Total Sq. Ft. 25.90Total Cu. Ft. 9.7830" x 24"MODULAR CABINETSStandard width, shallow depth cabinets are 30" wide x 24" deep. They offer you high density storage when replacingshelving or where aisles are narrow. You may order cabinet housings filled with your own custom designed drawerarrangement or choose from the popular pre-engineered combinations shown below. All models are shippedassembled and come with lock and two keys. Drawer divider sets are shown below. Additional accessories are shownon pages 46, 47 and 48.Standard Width/Shallow Depth Drawers for all 30” x 24” CabinetsDrawer pans have perforations for easy installation of dividers and accessories. Drawer fronts bolt on to allow changing drawerheights easily as storage needs change. Inside dimensions of drawers are 26" x 20.5" giving 3.7 sq. ft. of storage area.NX drawers have 87% railextension; 220 lbs. capacity.FX drawers have 100% railextension; 550 lbs. capacity.625092-3", 3-4", 2-6" & 2-8" Dr.Total Sq. Ft. 33.31Total Cu. Ft. 12.49626101-3", 4-4", 2-6" & 3-8" Dr.Total Sq. Ft. 37.01Total Cu. Ft. 15.0530" x 24" HousingsCabinet housings can be filled with full extension(FX) or normal extension (NX) drawers. Both typesof drawers can be mixed within these cabinets forcost efficient combinations. Select any combinationof drawer front heights that equal the usable heightof the cabinet. NX drawers can be converted toFX drawers at a later date if storage requirementschange. All 2" drawers are NX type. Drawers for all30" x 24" cabinets are listed below.39.6"24"NX Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension52002 2" 1.46 37 1.38 35 .44 220 100 87%52003 3" 2.44 62 2.17 55 .75 220 100 87%52004 4" 3.43 87 3.35 85 1.05 220 100 87%52005 5" 4.41 112 3.35 85 1.35 220 100 87%52006 6" 5.39 137 3.35 85 1.66 220 100 87%52007 7" 6.38 162 3.35 85 1.96 220 100 87%52008 8" 7.36 187 3.35 85 2.26 220 100 87%52009 9" 8.35 212 3.35 85 2.57 220 100 87%52010 10" 9.33 237 3.35 85 2.87 220 100 87%52012 12" 11.30 287 3.35 85 3.47 220 100 87%FX Model #52103 3" 2.44 62 2.17 55 .75 550 250 100%52104 4" 3.43 87 3.35 85 1.05 550 250 100%52105 5" 4.41 112 3.35 85 1.35 550 250 100%52106 6" 5.39 137 3.35 85 1.66 550 250 100%52107 7" 6.38 162 3.35 85 1.96 550 250 100%52108 8" 7.36 187 3.35 85 2.26 550 250 100%52109 9" 8.35 212 3.35 85 2.57 550 250 100%52110 10" 9.33 237 3.35 85 2.87 550 250 100%52112 12" 11.30 287 3.35 85 3.47 550 250 100%52114 14" 13.27 337 3.35 85 4.08 550 250 100%52116 16" 15.24 387 3.35 85 4.69 550 250 100%36"30"Housing No. 62400Usable Height 36"49.6"24"46"30"Housing No. 62500Usable Height 46"59.5"24"19"36"30"Housing No. 62600Usable Height 55"Drawer Divider Sets for 30” x 24” CabinetsChoose any divider set below that meets your needs. To order, use the four digit number and add the number 2, 3 or 4 as a suffix.To order a divider set 9211 for a 2" drawer, order number 92112, 92113 for 3" drawer and 92114 for 4"-16" drawer. Taller subdividersand partitions are available on request.0 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 3303691215182124260 3 6 9 12 15 18 21 24 27 30 3303691215182124260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 330 3 6 9 12 15 18 21 24 27 30 33003366991212151518182121242426260 3 6 9 12 15 18 21 24 27 30 339212 9213 9222 9223 9233 9243 9254 9263 92746 Comp. 8 Comp. 9 Comp. 12 Comp. 16 Comp. 20 comp. 30 Comp. 28 Comp. 40 Comp.13” x 6.25” 13” x 4.75” 8.5” x 6.25” 8.5” x 4.75” 6” x 4/75” 4.75” x 4.75” 3.75” x 3.75” 3” x 4.75” 3” x 3.75”03691215182124260 3 6 9 12 15 18 21 24 27 30 3303691215182124260 3 6 9 12 15 18 21 24 27 30 333930” x 24” Modular Cabinets

24" x 24"MODULAR CABINETSThe cabinets on this page are 24" wide x 24" deep. They offer you high density storage where weight load requirements are less andspace is at a premium. You may order cabinet housings filled with your own custom designed drawer arrangements or choose fromthe popular pre-engineered combinations shown below. All models are shipped assembled and come with lock and two keys. Drawerdivider sets are shown below. Additional accessories are on pages 46, 47 and 48.24” x 24” Modular Cabinets4031.7"24"28"24"35.6"Housing No. 61300 Housing No. 61700 Housing No. 61400 Housing No. 61500Usable Height 28" Usable Height 32" Usable Height 36" Usable Height 46"24" x 24" Pre-engineered CombinationsRegular Height Cabinets61407Overall dimensions are24"W x 24"D x 39.6"H.2-3", 2-4", 1-6", 2-8" Drs.Total Sq. Ft. 20.47Total Cu. Ft. 7.7024"32"24"39.6"24"61509Overall dimensions are24"W x 24"D x 49.6"H.2-3", 3-4", 2-6", 2-8" Drs.Total Sq. Ft. 26.28Total Cu. Ft. 9.8336"24"49.6"24"46"24"24" x 24" HousingsCabinet housings can be filled only with normalsuspension (NS) drawers. NS drawers have a loadcapacity of 220 lbs. (100 kgs.) with 90% extensioncapability. Side-mounted rails have a total of fourprecision ball bearings per drawer (2 each side).Select any combination of drawer front heightsthat equal the usable height of the cabinet.Drawers for all 24" x 24" cabinets are listed below.24" x 24" Machine or Base CabinetsThese cabinets are designed to store machine tools at the job site while using asmall amount of floor space. They can also be used as work station base cabinetsas shown on page 42. Available as pre-engineered units or custom design yourown drawer arrangement by combining the housings with drawers listed below.61303Overall dimensions are24"W x 24"D x 31.7"H.2-4", 2-6", 1-8" DrawersTotal Sq. Ft. 14.60Total Cu. Ft. 6.0461703Overall dimensions are24"W x 24"D x 35.6"H.1-2", 1-4", 3-6", 1-8" Drs.Total Sq. Ft. 17.52Total Cu. Ft. 6.86Standard Width DrawersDrawer pans have perforations for easy installation of dividers and accessories. Drawer fronts bolt on to allow changing drawerheights easily as storage needs change. Inside dimensions of drawers are 20.5" x 20.5" giving 2.92 sq. ft. of storage area.NS drawers have 90% railextension; 220 lbs. capacity.NX Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension51002 2" 1.46 37 1.38 35 .35 220 100 90%51003 3" 2.44 62 2.17 55 .59 220 100 90%51004 4" 3.43 87 3.35 85 .83 220 100 90%51005 5" 4.41 112 3.35 85 1.06 220 100 90%51006 6" 5.39 137 3.35 85 1.30 220 100 90%51007 7" 6.38 162 3.35 85 1.55 220 100 90%51008 8" 7.36 187 3.35 85 1.78 220 100 90%51009 9" 8.35 212 3.35 85 2.03 220 100 90%51010 10" 9.33 237 3.35 85 2.26 220 100 90%51012 12" 11.30 287 3.35 85 2.74 220 100 90%51014 14" 13.27 337 3.35 85 3.22 220 100 90%51016 16" 15.24 387 3.35 85 3.70 220 100 90%Drawer Divider Sets for 24” x 24” CabinetsTo order, use the four digit number and add the number 2, 3 or 4 as a suffix. To order a divider set 9110 for a 2" drawer, order number91102, 91103 for 3" drawer and 91104 for 4"-16" drawer. Taller subdividers and partitions are available on request.03691215182124260 3 6 9 12 15 18 21 24 2603691215182124260 3 6 9 12 15 18 21 24 260 3 6 9 12 15 18 21 24 26003366991212151518182121242426260 3 6 9 12 15 18 21 24 2603691215182124260 3 6 9 12 15 18 21 24 2603691215182124260 3 6 9 12 15 18 21 24 260 3 6 9 12 15 18 21 24 260 3 6 9 12 15 18 21 24 269110 9113 9121 9123 9133 91342 Comp. 8 Comp. 6 Comp. 12 Comp. 16 Comp. 20 Comp.10” x 20.5” 10” x 4.75” 6.25” x 10” 6.25” x 4.75” 4.75” x 4.75” 4.75” x 3.75”0369121518212426036912151821242603691215182124260 3 6 9 12 15 18 21 24 260 3 6 9 12 15 18 21 24 26036912151821242603691215182124260 3 6 9 12 15 18 21 24 2603691215182124260 3 6 9 12 15 18 21 24 26

30" x 30" Pre-Engineered Mobile Modular Cabinet30" x 30" HousingCabinet housing can be filled onlywith normal extension (NX) drawers.Select any combination of drawerfront heights that equal the usableheight of the cabinet.NX latching drawers are listed below.Standard Width DrawersDrawer pans have perforations for easy installation of dividers and accessories. Drawer fronts bolt on to allow changing drawerheights easily as storage needs change.Latching Drawers for 30" x 30" Mobile CabinetsNX drawers have 87% railextension; 220 lbs. capacity.63350Cabinet Size: 30" x 30" x 31"H.Inside Drawer Dim.: 26" x 26"Overall Dim.: 30” x 30” x 38.5”HStandard Drs.: 2-3", 2-4", 1-6", 1-8"Ship Weight: 296 lbs.MOBILEMODULAR CABINETSMobile modular cabinets make taking your tools to the job site easy and convenient. And, you get high density storage,too. Cabinets include black vinyl top mat, two black vinyl handles and two fixed, two swivel 5 x 1 1 Ú2" casters. Loadcapacity of each caster is 440 lbs. Individual drawer latches prevent drawers from opening when cabinet is beingmoved. Order our pre-engineered models or custom design your own from the housings and drawers listed below.All models are shipped assembled and come with lock and two keys. Drawer divider sets and accessories are available.28"NX Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension63902 2" 1.46 37 1.38 35 .57 220 100 87%63903 3" 2.44 62 2.17 55 .95 220 100 87%63904 4" 3.43 87 3.35 85 1.35 220 100 87%63905 5" 4.41 112 3.35 85 1.72 220 100 87%63906 6" 5.39 137 3.35 85 2.11 220 100 87%63907 7" 6.38 162 3.35 85 2.49 220 100 87%63908 8" 7.36 187 3.35 85 2.88 220 100 87%Latching Drawers for 24” x 24” Mobile CabinetsNS Front Usable Height Sidewall Height Load CapacityModel # Height Inch MM Inch MM Cubic Ft. Lbs. Kgs. Extension51902 2" 1.46 37 1.38 35 .35 220 100 90%51903 3" 2.44 62 2.17 55 .59 220 100 90%51904 4" 3.43 87 3.35 85 .83 220 100 90%51905 5" 4.41 112 3.35 85 1.06 220 100 90%51906 6" 5.39 137 3.35 85 1.30 220 100 90%51907 7" 6.38 162 3.35 85 1.55 220 100 90%51908 8" 7.36 187 3.35 85 1.78 220 100 90%38.5"30" 30"Mobile HousingNo. 63359Usable Height 28"24" x 24" Pre-engineered Mobile Modular Cabinets24" x 24" HousingsCabinet housings can be filled only with normal suspension(NS) drawers. NS drawers have a load capacity of 220 lbs.(100 kgs.) with 90% extension capability. Side-mounted railshave a total of four precision ball bearings per drawer(2 each side). Select any combination of drawer front heightsthat equal the usable height of the cabinet. Latching drawersare listed below.61203Cabinet Size: 24" x 24" x 25.6"H.Inside Drawer Dimensions:20.5" x 20.5"Overall Dim.: 24" x 24" x 25.6"H.Standard Drawers:2-2", 1-4",1-6", 1-8"Ship Weight: 157 lbs.NS drawers have 90% railextension; 220 lbs. capacity.61750Cabinet Size: 24" x 24" x 35"H.Inside Drawer Dimensions:20.5" x 20.5"Overall Dim.: 24" x 24" x 42.4"H.Standard Drawers:2-3", 4-4", 2-5"Ship Weight: 236 lbs.24"22"24"32.25"Mobile HousingNo. 61209Usable Height 22"32"42.4"24"24"Mobile HousingNo. 61759Usable Height 32"41Mobile Modular Cabinets

STATIONARY WORK STATIONCOMBINATIONSStationary Work Stations42The bott/Kennedy line of work stations includes stationary and mobile work stations, components and work surfaces.Whether you need an individual bench or a complete work station complex, bott/Kennedy offers an extensive selection.Order our standard combinations or custom design the units you need from individual components. See page 40 forcabinet housing and drawer information. Drawer dividers and accessories are on pages 46, 47 and 48. All components,except work tops are available in the four standard colors: tan (stocking color), gray, green, blue. Special colors areavailable upon request.Stationary Work Station CombinationsFeatured are eight of our most popular work station combinations. To order, choose the work station that suits yourneeds and a 60” or 72” top shown below. You may, of course, order custom-designed units, including special work topsizes, from the components shown below and on page 43.Work Surface Height 33 1 Ú2/33 3 Ú4"Work Surface Height 37 3 Ú8/37 5 Ú8"WeightCapacity,900 lbs.Model 69140Above model includes:One standard leg;one 61303 24" x 24" cabinet.Order 60" or 72" topseparately. See below.Weight Capacity,1500 lbs.Model 69148Above model includes:Two 61303 24" x 24" cabinets.Order 72" top separately.See below.WORK STATION COMPONENTSStandard LegStrong, weldedconstruction.Overall heightis 31.7". For usewith 31.7" highbase cabinets.Model 56100Adjustable LegAdjusts in 1" incrementsfrom 27.5" to 40.125".Use where other than31.7" fixed height isneeded.Model 66200WORK STATION TOPSLaminated Maple TopThis traditional hardwood work surface is suitable formost any application. Eachtop is welded butcher blockconstruction with a smooth,maintenance free acrylic finish.WT6030 60"W x 30"D x 1 3 Ú4"HWT7230 72"W x 30"D x 1 3 Ú4"HSpecial Order Work TopsMaple work tops are available in other sizes than standard...both in length and width. Delivery times on specialsizes are longer than on standard. Tops are available in single pieces up to 120", but should be supported at intervalsnot exceeding 72" by a bench leg or base cabinet.WORK STATION BASE CABINETSModel 61303 workstation base cabinet.Overall dimensions are24"W x 24"D x 31.7"H.Usable height is 28".Standard drawerarrangement:(2) 4" NS drawers(2) 6" NS drawers(1) 8" NS drawersModel 61703 workstation base cabinet.Overall dimensions are24"W x 24"D x 35.6"H.Usable height is 32".Standard drawerarrangement:(1) 2" NS drawers(1) 4" NS drawers(3) 6" NS drawers(1) 8" NS drawersWeight Capacity,1500 lbs.Model 69104Above model includes:Two adjustable legs.Order top separately.See below.Side/Back Retainer SetFour-inch high steel side/backstops for work tops. For safetyand damage prevention.56607—For 60" work top56608—For 72" work topFoot RestsAttach between work bench legs orbetween leg and base cabinet.66606—Adjusts from 22" to 38 5 Ú8"66726—Adjusts from 38 5 Ú8" to 66 3 Ú8"Weight Capacity,1500 lbs.Model 69146Above model includes:One adjustable leg;one 61703 24" x 24" cabinet.Order 60" or 72" topseparately. See below.Fixed Riser ShelfStationary riser of heavy gaugesteel to hold heavy loads. Shelfis 14" high by 9" deep.Has electrical knockouts.56601—Riser for 60" work top56721—Riser for 72" work topElectrical PanelsKnockout panels for use whereelectrical power is needed.56602—8 3 Ú4"L. Use with 60" top,two 24" wide cabinets56722—20 3 Ú4"L. Use with 72" top,two 24" wide cabinets56605—28 3 Ú8"L. Use with 60" top,one 24" wide cabinet56725—40 3 Ú8"L. Use with 72" top,one 24" wide cabinet

MOBILE WORK STATIONCOMBINATIONSMobile Work Station CombinationsYou may order the work stations shown below or custom-designedunits, including special work top sizes, from the componentsshown below. Drawer dividers and accessories are on pages 46, 47,and 48. All components, except work tops, are available in the fourstandard colors: tan, gray, green, blue. Special colors are availableupon request.Work Surface Height 36"–Weight Capacity, 1000 lbs.All models include standard mobile base unit no. 68910,consisting of two legs, two top stringers, two bottom stringers,one rear stringer, one caster set (two fixed, two swivel) and fourcaster brackets. Order tops separately. See page 42.Model 68911Above model includes:Standard mobile base unit,one 61104 cabinet.Order top separately.See page 42.Model 68913Above model includes:Standard mobile base unit,two 61104 cabinets.Order top separately.See page 42.UNDERCOUNTER STORAGE—FOR STATIONARY & MOBILE WORK STATIONSHousing No. 61290Usable Height 22"Drawers on page 41.Housing No. 61100Usable Height 12"Drawers on page 41.Model 99850work station drawer.Overall dimensions are19"W x 23"D x 8"H.Model 61294 stationary work station cabinet.Overall dimensions: 24"W x 24"D x 25.6"H.Standard drawer arrangement:(2) 4" NS drawers, (1) 6" NS drawer and(1) 8" NS drawerModel 61295 mobile work station cabinet.Overall dimensions: 24"W x 24"D x 25.6"H.Drawers have individual safety latches.Standard drawer arrangement:(2) 4" NS drawers, (1) 6" NS drawer and(1) 8" NS drawerModel 61103 stationary work station cabinet.Overall dimensions: 24"W x 24"D x 16"H.Standard drawer arrangement:(1) 2" NS drawer, (1) 4" NS drawer and(1) 6" NS drawerModel 61104 mobile work station cabinet.Overall dimensions: 24"W x 24"D x 16"H.Drawers have individual safety latches.Standard drawer arrangement:(1) 2" NS drawer, (1) 4" NS drawer and(1) 6" NS drawerBottom ShelfFull-length bottom shelf. Usewith mobile work stations only.Model 68013—48"L x 24"D.COMPACTMODULAR CABINETSTen standard models available to service and organize machinework stations, tool and supply cribs, mobile maintenance, andassembly and inspection stations. Space saving design givesmaximum storage in congested work areas. Compact modularcabinets have 164 lb. drawer capacity, central locking system,plus individual safety latch on each drawer.All cabinets are available in tan, green, gray and blue. Drawers,dividers and accessories listed on page 44.Standard Compact Modular CabinetsAll cabinets are 19.7” W x 19.7” D.Inside drawer dimensions are 17.3” W x 17.3” D.60708Standard Drawers:5-3", 1-5", 2-6"60307Standard Drawers:4-3", 1-5", 2-6"60309Cabinet Height:31.5"H.Standard Drawers:2-3", 1-6"One Door: 17"HOne AdjustableShelf: 1"H60706Standard Drawers:1-3", 3-4", 1-5", 1-12"60306Standard Drawers:3-4", 1-5", 2-6"60709Cabinet Height:34.5"H.Standard Drawers:1-3", 2-6"One Door: 17"HOne AdjustableShelf: 1"H34.5"31.5"19.7"32"19.7"Housing No.6070019.7"29"19.7"Housing No.60300Tool Hooks Soldon page 31.Door Assemblyis 17"H.Door Opening is18.5"W x 15.75"H43Mobile Work Stations & Compact Modular Cabinets

COMPACTMODULAR CABINETSCompact Modular Cabinets44Standard Mobile Compact CabinetsAll cabinets are 19.7” W x 19.7” D. Inside drawer dimensions are 17.3” W x 17.3” D.60205Housing No. 60200(4) 3 x 1 1 Ú4" swivel castersCabinet Height:29.35"H.Standard Drawers:2-3", 1-5", 2-6"60203Housing No. 60200(4) 3 x 1 1 Ú4" swivel castersCabinet Height:29.35"H.Standard Drawers:1-5", 1-6", 1-12"Mobile Base Kit No. 60221To order maintenance bench withcustom drawer arrangement, orderKit No. 60221, at right. Then addhousings, drawers and worksurface top.25.6"19.7"23"19.7"Housing No. 60200Standard Mobile Maintenance BenchesAll models are 40" W x 20" D x 35"H. Each unit is equipped with caster set no. 80837,(includes (2) fixed and (2) swivel 5 x 2" casters). All drawers are 17.3" W x 17.3" W.60218Comes standard withmaple top no. WT4020Uses two Housing Nos.60200 and one Base KitNo. 60221Standard Drawers(on left): 2-3", 1-5", 2-6"Standard Drawers(on right): 1-5", 1-6", 1-12"COMPACT MODULARCOMPONENTS & ACCESSORIESDrawers for Compact Modular Cabinets60003, 3" Drawer60004, 4" Drawer60005, 5" Drawer60006, 6" Drawer60012, 12" DrawerDrawer Dimensions are 17.3" W x 17.3" DLaminated Maple Work Surface TopsWT4020, Mobile Maintenance Bench Top40" W x 20" D x 1.75" H.WT6024, 60” Work Bench Top60" W x 24" D x 1.50"HWT7224, 72” Work Bench Top72" W x 24"D x 1.50"HTools not included.To order a customdesigned mobilecabinet, order3 x 1 1 Ú4" swivelcaster set 80830,plus housing60200 and drawersshown below.60215Comes standard withmaple top no. WT4020Uses one Housing No.60200, one Housing No.60201, one Base KitNo.60221 and one HookSet No. 99851Standard Drawers(on left): 1-5", 1-6", 1-12"Standard Drawers(on right): 2-3"Drawer Divider Kits69063, 6 Compartment Kit for 3" Drawers69093, 9 Compartment Kit for 3" Drawers69023, 12 Compartment Kit for 3" Drawers69064, 6 Compartment Kit for 4" Drawers69094, 9 Compartment Kit for 4" Drawers69024, 12 Compartment Kit for 4" Drawers60009Door Assembly 17"H60040Adjustable Shelf 1"H

NEW! KENNEDY HMS SERIES“HYBRID MODULAR STORAGE”Combines the economy of roller cabinet construction with modular cabinet features!• Kennedy Quality• Flexible Drawer Divider System• Stationary & Mobile Models• Drawer Safety Interlock• 130-220 lbs. Drawer Weight CapacityCompact, high-density storage that saves space while itorganizes parts, tools and supplies in the best traditionsof “Lean Manufacturing” and 5S Programs. Cabinets arestackable, can be fork-lifted and used as work stations.Housings are 29” wide x 20” deep with usable drawerheight of 28”. Four-inch drawers have 130 lb. weightcapacity; all larger drawers have double slides for 220 lb.weight capacity. Only one drawer open-at-a-time safetysystem. Ball-bearing slides are standard. MDF worksurface. Cabinets can also be used as work station basecabinets, using two cabinets to support work surface or onecabinet with adjustable work station leg, 66200 on page 42.Full-width drawer pulls with label strips. Lock, two keys.Pre-Configured CombinationsStandard drawers: 7-4”40097—Tan finish40197—Blue finishStandard drawers:4-4”, 2-6”40096—Tan finish40196—Blue finishDrawersDrawers arewelded heavygauge steelthat havebottom perforations and side wall divider slotsfor easy installation of divider sets. (2” draweris a standard roller cabinet drawer and cannotbe divided). When ordering custom-designedcabinets, the drawer front heights must addup to the usable height of the housing (28”).0 3 6 9 12 15 18 21 24 25003366991212151518.518.50 3 6 9 12 15 18 21 24 250 3 6 9 12 15 18 21 24 25003366991212151518.518.50 3 6 9 12 15 18 21 24 25Standard drawers:2-4”, 2-6”, 1-8”40095—Tan finish40195—Blue finishDrawersAll drawers are 25” x 18 1 Ú2”FrontNo. Color Height40002 Tan 2”40004 Tan 4”40006 Tan 6”40008 Tan 8”40102 Blue 2”40104 Blue 4”40106 Blue 6”40108 Blue 8”0 3 6 9 12 15 18 21 24 25003366991212151518.518.50 3 6 9 12 15 18 21 24 25Housing No.40001—Tan finish40101—Blue finishUsable Height, 28”Mobile PackageConsists of tubular sidehandle and 6 x 2” lockingcaster set—two swivel,two rigid.Model 42010Drawer Divider SetsConsists of partitions that fasten to drawer bottom and divide drawer into sections, plus subdividers that can be inserted into slotsto form compartments. Partitions and subdividers are 3.5” high. If taller partitions/subdividers are needed, see Kennedy’s website.0 3 6 9 12 15 18 21 24 25003366991212151518.518.50 3 6 9 12 15 18 21 24 25Cabinet PlasticWork SurfaceSeamless, ABS blackplastic cover fits overcabinet top.Model 82171See your KennedyTool StorageAccessories Brochurefor more information.0 3 6 9 12 15 18 21 24 25003366991212151518.518.50 3 6 9 12 15 18 21 24 2542001 42002 42003 42004 420056 Compartments 8 Compartments 12 Compartments 12 Compartments 20 Compartments8.3” x 9.25” 12.5” x 4.6” 8.3” x4.6” 6.2” x 6.1” 6.2” X 3.6”Visit our website at www.kennedymfg.com for more information on individual dividers and partitionsto customize drawer interiors.28”29”20”45HMS Mobile Modular Storage

MODULAR STORAGEDRAWER ACCESSORIESPartitions & SubdividersUse partitions to divide drawersinto sections. Insert subdividersto make compartments. Partitionsfasten to drawer bottom withscrew and can be fitted fromfront to back or side to side.Subdividers slide into slotsin partitions and sidewalls.Slots are .79" (20 mm) apart.PARTITIONSPartition No. of EDP Order No.Length Spaces 2" Dr. Front 3" Dr. Front 4"-16" Dr. Front9.33" (237 mm) 12 99012 99013 9901414.84" (377 mm) 19 99022 99023 9902417.00” (432 mm) 21 — 99017 9901820.35" (517 mm) 26 99032 99033 9903425.87" (657 mm) 33 99042 99043 9904440.15” (1020 mm) 51 — 99053 99054Note: Taller partitions and subdividers for use with higher side walls (drawerheight extensions) are available. Check your bott/Kennedy Price List or contactyour Kennedy representative or distributor for information.Drawer Accessories46SUBDIVIDERS2" Dr. Front 3" Dr. Front 4"-16" Dr. FrontLength Spaces EDP Order No. EDP Order No. EDP Order No.1.42" (36 mm) 2 99505 99103 991042.02" (56 mm) 3 99122 99123 991242.99" (76 mm) 4 99503 99143 991443.78" (96 mm) 5 99162 99163 991644.57" (116 mm) 6 99182 99183 991845.35" (136 mm) 7 99202 99203 992046.14" (156 mm) 8 99222 99223 992246.93" (176 mm) 9 99242 99243 992447.72" (196 mm) 10 99262 99263 992648.50" (216 mm) 11 99282 99283 992849.29" (236 mm) 12 99289 99290 9929110.08" (256 mm) 13 99302 99303 9930412.44" (316 mm) 16 99322 99323 9932413.23" (336 mm) 17 99342 99343 99344Tool Holders/Angular RestsUsed to store files, tap and die holders, and wrenches. To form an adjustable base to fit the tool or part to be stored,fasten two angular rests to drawer bottom. Retaining blocks are designed to secure irregular shaped tools.(1) (2) (3)EDPDescriptionOrder No.(1) Tool Holders 995311.56" L x .8125" W x 1.56"H(2) Angular Rests, pairs 995323.125" L x .8125" W x 2.312"H(3) Retaining blocks 995331.3" L x .56" W x .56"HPrism RacksFor side-sensitive tools such as taps, reamers and gauges. The serrated blocks are in two pitches—.5" and .79" centers.Spacers available to increase height of prism racks.Prism racks and spacers are 6.25"L x .625"W x .8125"H.EDPDescription Size Order No.Prism racks with .79"Hgrooves .5" apart Pitch 12 99511Prism racks with .79"Hgrooves .79" apart Pitch 20 99512Spacer .79"H 99513

MODULAR STORAGEDRAWER ACCESSORIESMilling Tool HoldersDesigned to secure milling tools, saws, disksand clamping devices. Eight sizes, one-inchhigh. Can be connected for larger tools.Plastic Groove TraysA simple way to store reamers, taps and drill bits. Trays clip together.Made of red polystyrol. Not for use in compact modular cabinets.PLASTIC GROOVE TRAYSNo. of Grooves EDPGroove Size Order No.2 grooves/3" 995003 grooves/1.9" 995014 grooves/1.4" 99502EDPSize/Dia. Order No..39" (10 mm) 99521.51" (13 mm) 99522.63" (16 mm) 99523.87" (22 mm) 995241.00" (25 mm) 995251.26" (32 mm) 995261.57" (40 mm) 995271.97" (50 mm) 99528TRAY DIVIDERSEDPDivider Size Order No.2 grooves 995033 grooves 995044 grooves 99505Plastic Groove Trays are6.3"L x 6.3"W x 1.375"H.Plastic BoxesHold small parts andelectronic components.Available in three sizesand three heights. Canbe clipped together inany combination.Made of red polystyrol.40.16" (1020 mm)Plastic Box Sets for 30” x 30” Modular Cabinets26" (660 mm)Felt Drawer LinerHelps protect tools from scratchesand abrasions. Easily installed intodrawer with household glue.80991—20 1 Ú2" x 82" roll80992—26" x 82" roll20.5" (520 mm)26" (660 mm)20.5" (520 mm)26" (660 mm)26" (660 mm)20.5" (520 mm)26" (660 mm)26" (660 mm)40.16" (1020 mm)Dr. Front EDPBox Size Height Order No.2.8"W x 2.8"D x 1.375"H 2" 995722.8"W x 2.8"D x 2.1875"H 3" 995732.8"W x 2.8"D x 3.125"H 4" 995742.8"W x 5.6"D x 1.375"H 2" 995822.8"W x 5.6"D x 2.1875"H 3" 995832.8"W x 5.6"D x 3.125"H 4" 995845.6"W x 5.6"D x 1.375"H 2" 995925.6"W x 5.6"D x 2.1875"H 3" 995935.6"W x 5.6"D x 3.125"H 4" 9959426" (660 mm)20.5" (520 mm)20.5" (520 mm)9625 9637 9650 9681 96351 Box 2.83" x 2.83" 9 Boxes 2.83" x 2.83" 27 Boxes 2.83" x 2.83" 81 Boxes 2.83" x 2.83" 7 Boxes 5.66” x 2.83”8 Boxes 5.66" x 2.83" 20 Boxes 5.66" x 2.83" 19 Boxes 5.66" x 2.83" 28 Boxes 5.66” x 5.66”16 Boxes 5.66" x 5.66" 8 Boxes 5.66" x 5.66" 4 Boxes 5.66" x 5.66"Plastic Box Sets for 24” x 24” Modular Cabinets96161 Box 2.83” x 2.83”6 Boxes 5.66” x 2.83”9 Boxes 5.66” x 5.66”962813 Boxes 2.83” x 2.83”12 Boxes 5.66” x 2.83”3 Boxes 5.66” x 5.66”20.5" (520 mm)964949 Boxes 2.83” x 2.83”17" (432 mm)Griptex LinerNon-slip, open weave drawer liner keeps toolsin place. Polyester fabric coated with PVC.Washable, anti-fungus and mildew-proof.80813—20 1 Ú2" x 82" roll80815—26" x 82" roll17" (432 mm)Plastic Box Set for 44” x 30" Cabinets26" (660 mm)47Drawer Accessories

Drawer and Cabinet Accessories48For 30" x 30" cabinets,especially 63303shown on page 37.99541 Set 25.6"L x 3.5"H99543 Set 25.6"L x 5"For 30" x 24" Cabinets.99540 Set 20"L x 3.5"H99542 Set 20"L x 5"HAdjustable ShelfAdjustable supportbrackets allow shelflocation to beeasily changed.Pull Out Shelfwith Drawer HandleSafety feature, lockoutpin prevents shelffrom moving backinside the cabinet untilthe pin is released.Bottom ShelfTurns cavity in bottomof cabinet into easyaccess storage area.Pull Out Shelfwith GussetsFor use in cabinetswith doors. Featuressafety lock-out pinmechanism.Pull Out Shelves and Shelves with Gussetshave 550 lbs. weight capacity; except, shelvesfor 24” x 24” cabinets, 220 lbs. weight capacity.Model No. Description63202 Adjustable Shelf for 30" x 30" Cabinet63302 Pull Out Shelf for 30" x 30" Cabinet63305 Pull Out Shelf with Gussets for30" x 30" Cabinet99001 Bottom Shelf for 30" x 30" Cabinet64202 Adjustable Shelf for 44" x 30" Cabinet64302 Pull Out Shelf for 44" x 30" Cabinet64305 Pull Out Shelf with Gussets for44" x 30" Cabinet99004 Bottom Shelf for 44" x 30" Cabinet62202 Adjustable Shelf for 30" x 24" Cabinet62302 Pull Out Shelf for 30" x 24" Cabinet62305 Pull Out Shelf with Gussets for30" x 24" Cabinet99003 Bottom Shelf for 30" x 24" Cabinet61202 Adjustable Shelf for 24" x 24" Cabinet61302 Pull Out Shelf for 24" x 24" Cabinet61305 Pull Out Shelf with Gussets for24" x 24" Cabinet99002 Bottom Shelf for 24" x 24" CabinetNote: Above numbers are for tan finish shelves only.Shelves are also available in blue, green and graystocking colors. Special colors available upon request.Bottom Support BracketsEach set of two secures upto five NC/CNC tool traysinto drawer. (Tool traysshown on page 50).Bolt to drawer bottom.Hardware included.MODULAR STORAGE DRAWERAND CABINET ACCESSORIESPanel Brace SupportsBraces attach to workstation and louveredor toolboard panels(shown on page 26).Two brace supportsare required per twopanel set.Model 50050includes one brace andmounting hardware.50050Model 50054 includesone left hand and oneright hand angle bracketplus mounting hardware.Fork Lift BasesBolt easily onto cabinet.Come with front covers.Available in same colorsas cabinets. 2.4"H99606 for 20" x 20" cabinets99616 for 24" x 24" cabinets99626 for 30" x 24" cabinets99636 for 30" x 30" cabinets99646 for 44" x 30" cabinetsPallet Truck Base. 4"H.99706 for 20" x 20" cabinets99716 for 24" x 24" cabinets99726 for 30" x 24" cabinets99736 for 30" x 30" cabinets99746 for 44" x 30" cabinetsModular Cabinet DoorsSecure expensive tools and suppliesbehind locking door. Comes withattachment hardware and lock/key set.Pullout Shelf with Gussets must be usedinstead of standard drawer with drawerpull in order for door to close.FitsEDPHousing No./Size Order No.63600, 30" x 30" x 59.5" 6368063400, 30" x 30" x 39.6" 6348063300, 30" x 30" x 31.7" 6338062500, 30" x 24" x 49.6" 6258062700, 30" x 24" x 35.6" 6278064600, 44" x 30" x 59.5" 6468064400, 44" x 30" x 39.6" 6448061280, 24" x 24" x 25.6" 6128061300, 24" x 24" x 31.7" 6138061400, 24" x 24" x 39.6" 6148061500, 24" x 24" 49.6" 6158061700, 24" x 24" x 35.6" 61780Two 50050 Braces withpanel set 50002 (shownon page 30)50054Two 50050 Braceswith panel set 50061(shown on page 30)Drawer HeightExtensionsRemovabledrawerinsert raisessidewall height tomatch drawer front. Slotted sides allowuse of taller partitions and subdividers.Housing For Drawer EDPSize Front Height: Order No.24" x 24" 6" 9106624" x 24" 8" 9106724" x 24" 10" 9106824" x 24" 12" 9106930" x 30" 6" 9107030" x 30" 8" 9107130" x 30" 10" 9107230" x 30" 12" 9107330" x 24" 6" 9107430" x 24" 8" 9107530" x 24" 10" 9107630" x 24" 12" 9107744" x 30" 6" 9107844" x 30" 8" 9107944" x 30" 10" 91080

INSIDE HEIGHTOF DRAWERSDRAWERFRONTHEIGHT2"50 mm3"75 mm4"100 mm5"125 mm6"150 mm7"175 mmHow to order bott/Kennedycustom built cabinets, drawers and accessories1. Separate, by height, items to be stored andcalculate the required square area of all items ineach height group, taking into consideration theaverage inventory quantity.2. Select any of the 12 standard height drawers.Drawers are available in 1" increments from 2"to 10", and 2" increments from 10" to 16". Use theHandy Guide Ruler at the top of this page. Thelines indicated the usable height of the drawerand the numbers (2", 3", etc.) indicate the drawerfront height to be calculated.3. Choose the type of suspension needed. NormalSuspension (NS) drawers have 90% extension and220 lbs. load capacity. NOTE: NS drawers availablefor 24" x 24" cabinets only.Normal Extension (NX) drawers have 87% extensionand 200 lbs. load capacity.Full Extension (FX) drawers have over 100%extension and 550 lbs. capacity. NOTE: The smallestdrawer available with Full Extension telescopingrails is 3" front height.4. Select the cabinet housing that best fits your needs.NS drawers fit only 24" x 24" cabinet housings. FXand NX drawers fit 30" x 24" and 30" x 30" cabinethousings and can be mixed within the same housing.XW (extra wide), 44" x 30" cabinet housings use only550 lb. FX drawers. Add the drawer front heightstogether to fill the usable height of the selectedcabinets.5. Select any of the dividers sets shown in the catalogto suit your requirements, or make up your own setsfor the accessories listed on pages 46 through 48.Drawers are divided into spaces. Each space is .79"(20 mm) wide. Use the scale on the bottom of thispage to determine the length of the subdividers.Example: A ball bearing measuring 2" requires a3-space subdivider.NUMBER OF SPACES49.6"39.6"46"24" 24"36"24" 30"18.5 inches NS (20.5 " Drawer )23.1 inches NX (26 " Drawer )26.5 inches FX (26 " Drawer )39.6"59.5"36"30" 30"19"36"30" 44.3"26 inches-33 spaces2 3 456789108"200 mm26 inches-33 spaces49How to Order bott/Kennedy Custom Built Cabinets

PLASTIC SOCKETS& NC/CNC TOOL TRAYSSusta/Kennedy plastic sockets are of high quality, break resistant plastic. Shockproof ABS plastic sockets firmlysupport and protect tool holder shanks. Sockets are available for standard tapers, Morse tapers and straight shanktool holders. All plastic sockets are available in red only.Plastic Sockets & Tool Trays5070059 socket for #30taper tool holders. AlsoCat V#3, Morse 3. Upto seven sockets will fit70060 tool tray.70067 socket for #35taper tool holders. Also,Cat V#3, Morse 4. Upto seven sockets will fit70060 tool tray.70051 socket for #40taper tools. Also, CatV#4. Up to sevensockets will fit 70060tool tray.70052 socket for #45taper tools. Also, Morse5. Up to six sockets willfit 70060 tool tray.70053 socket for #50taper tool holders. Also,Cat V#5. Up to fivesockets will fit 70060tool tray.70100 socket for straightshank tools up to 1.2" dia.(30 mm). Up to ten socketswill fit 70060 tool tray.70064 socket for straightshank tools up to 1.4" dia.(36 mm) TR36. Up toseven sockets will fit70060 tool tray.70063 socket for straightshank tools up to 1.5" dia.(40 mm). Up to sevensockets will fit 70060 tooltray.70056 socket for straightshank tools up to 1.75" dia.(44.4 mm). Up to six socketswill fit 70060 tool tray.70065 socket for straightshank tools up to 1.97" dia.(50 mm). Up to six socketswill fit 70060 tool tray.70057 socket for straightshank tools up to 2" dia.(50.8 mm). Up to six socketswill fit 70060 tool tray.70066 socket for straightshank tools up to 2.4" dia.(60 mm). Up to six socketswill fit 70060 tool tray.Tool Trays for NC/CNC Tools70070 metal tool tray holdssockets 70094, 70096, 70026and 70027.23.3"W x 5.9"D x 5"H.74021 three-tier standsupports three trays.26.3" W x 12.6" D x 23.66"H.Weight Capacity, 300 lbs.Ship Wt. 13 lbs.70060 metal tool tray holds plasticsockets for all types of tools. Twosturdy, collapsible handles andfoot construction make it easy totake tools to work table.23.3" W x 4.5" D x 5"H.Trays and socketsnot included.Kennametal KM ®Plastic Sockets70030 KM321.75" W x 4" D x 1"HUp to 8 will fit a tray70031 KM401.75" W x 4" D x 1"HUp to 8 will fit a tray70032 KM503.25" W x 4" D x 1"HUp to 6 will fit a tray70033 KM633.25" W x 4" D x 1"HUp to 6 will fit a traySandvik CaptoSystem Plastic Sockets71103 C31.75" W x 4" D x 1"HUp to 8 will fit a tray71104 C41.75" W x 4" D x 1"HUp to 8 will fit a tray71105 C53.25" W x 4" D x 1"HUp to 6 will fit a tray71106 C63.25" W x 4" D x 1"HUp to 6 will fit a tray71108 C83.25" W x 4" D x 1"HUp to 6 will fit a trayAngle brackets holdplastic sockets firmlyin place. Easily removedfor changing inserts.HSK-A System Sockets70020 HSKA 251.75" W x 4" D x 1"HUp to 8 will fit a tray70021 HSKA 321.75" W x 4" D x 1"HUp to 8 will fit a tray70022 HSKA 401.75" W x 4" D x 1"HUp to 8 will fit a tray70023 HSKA 503.25" W x 4" D x 1"HUp to 6 will fit a tray70024 HSKA 633.25" W x 4" D x 1"HUp to 6 will fit a tray70025 HSKA 803.25" W x 4" D x 1"HUp to 6 will fit a tray70026 HSKA 100Fits Tray 70070 only4" W x 4" D x 1"HUp to 5 will fit a tray70027 HSKA 125Fits Tray 70070 only5.3" W x 4" D x 1"HUp to 4 will fit a tray74023 two-tier standsupports two trays.26.3" W x 12.6" D x 16"H.Weight Capacity, 200 lbs.Ship Wt. 10 lbs.70090 socket withoutholes, for special sizedtools. Holes up to 1.2"can be drilled. Up toeight sockets will fit70060 tool tray.70092 socket withoutholes, for special sizedtools. Holes up to 2.25"can be drilled. Up tosix sockets will fit70060 tool tray.70094 socket withoutholes, for special sizedtools. Holes up to 3.5"can be drilled. Up tofive sockets will fit70070 tool tray.70096 socket withoutholes, for special sizedtools. Holes up to 3.7"can be drilled. Up tofour sockets will fit70070 tool tray.Plastic socketsdesigned to secureand protectModular QuickChange Units70005universalbrackets arerequired toplace tooltrays in tool trolleys, toolkarts,storage racks or bench stands. Canbe positioned three ways—horizontal,15 degrees and 30 degrees. Packed insets of one left and one right.Trays and socketsnot included.

TOOL TROLLEYSAND ADD-ONSSusta/Kennedy trolleys are an efficient means of transporting tools between machining centers and tool rooms.Tooling is contained within the side walls, protecting both the tooling and the operation. Basic trolley can be easilyexpanded as your needs grow.Basic NC/CNC Tool Trolley72007—Smooth Blue FinishFour-panel trolley holds up to10 tool trays. Comes with four6" casters and one end handle.Maximum tool holder capacity:(80) 30,35 taper(70) 40 taper(60) 45 taper(50) 50 taper31"L x 24" W x 38.75"H.Weight Capacity, 2,200 lbs.Pre-Engineered NC/CNC Tool TrolleyPre-configured trolleys come with eight tool trays,brackets and plastic sockets. Additional tool trays,plastic sockets and trolley accessories must beadded separately.Tools not includedShelves for trolleys have ribbedrubber mats. 3 Ú4" high shelf edge.Brackets attach to inside trolleywalls. Weight Capacity, 200 lbs.Available in Dark Gray Finish Only72008—23.75" W x 22.6" D x 1.75"H72010—23.75" W x 10.25" D x 1.75"HSteel Shelf provides additional workspace. Comes with rubber mat.18" W x 12" D x 1.5"H.72006—Smooth Blue FinishShelf No. 72045 fits trolley 72007and ToolKart.24" W x 12" D x 1.5"H.72045—Smooth Blue FinishThe TOOLKARTPre-configured ToolKarts come with six frames and plastic sockets. Additional tool frames, plastic socketsand trolley accessories must be added separately.Pre-configured ToolKartholds up to 42 #30 taper tools.Weight Capacity, 1,200 lbs.73030—Smooth Blue FinishToolKart only.28.25"W x 23.5"D x 38"H.Weight Capacity, 1,200 lbs.72001—Smooth Blue FinishPre-configured trolley holdsup to 40 #50 taper tools.Weight Capacity, 2,200 lbs.73154—Smooth Blue FinishThe CutterKartPre-configured CutterKarts come with four metaland ABS plastic tool holder plates.Pre-configured ToolKartholds up to 36 #50 taper tools.Weight Capacity, 1,200 lbs.73050—Smooth Blue FinishPre-configured ToolKartholds up to 42 #40 taper tools.Weight Capacity, 1,200 lbs.73040—Smooth Blue FinishPre-configured trolley holdsup to 56 #40 taper tools.Weight Capacity, 1,200 lbs.73240—Smooth Blue FinishPre-configured trolley holdsup to 40 #50 taper tools.Weight Capacity, 1,200 lbs.73250—Smooth Blue FinishExtra #40 taper tool holderplate, holds 14 tool holders.Model 70084Extra #50 taper tool holderplate, holds 10 tool holders.Model 70085Sturdy socket frame bolts toend wall of ToolKart.Holds up to 11 #30 taper tools.70062—Smooth Blue Finish51Tool Trolleys and Add-ons

Pre-Engineered Tool Storage Racks52STORAGE STATIONBlue EDPDescription Size Order No.Racks 26"W x 24"D x 77"H 74066Side Panel, 8/set 76.5"H 74168Document Shelf 53"W x 12"D x 15.5"H 74413Document Shelf 79"W x 12"D x 15.5"H 74414Table Support 53"L 74419Table Support 79"L 74422Wood Top 53"W x 24"D x 1.5"H 74415 (Maple finish)Wood Top 79"W x 24"D x 1.5"H 74416 (Maple finish)32" Side Panels, 8/set 32"H 7440832" Rack with back 32"H 7541332" Rack Door 28"H 7443377" Rack Door 72"H 7407673" Back Panel 73"H 74075Five lift-out tool trays, fivedrawers and a pull-out shelfprovide organized storagefor up to (35) #40 taper or(25) #50 taper tools andNC/CNC machining supplies.Drawer and pull-out shelfweight capacity, 275 lbs. each.26" W x 24" D x 77"H.Interior load capacity, 2,200 lbs.75112—Smooth Blue FinishFive pull-out frames will storeup to (125) #50 taper tools or(175) #40 taper tools. Pull-outframe weight capacity, 275 lbs.each. 26" W x 24" D x 77"H.Interior load capacity, 2,200 lbs.75122—Smooth Blue FinishPRE-ENGINEEREDTOOL STORAGE RACKSPre-configured Ministore ® contains:(5) Tool trays(1) Pull-out shelf(13) Drawers(5) Pull-out frames(1) Locking tall door(1) Book shelf(1) 53"L Maple work topHolds up to (150) #50 taper tools,or (210) #40 taper tools.Overall dimensions:105"W x 24"D x 77"H.75601—Smooth Blue FinishBench stand and tools not included.32"H four panel rack with back organizessupplies and tools under a work bench, orat machine side.26" W x 24" D x 32"H.Interior load capacity, 2,200 lbs.75413—Smooth Blue FinishThree pull-out frames and fivedrawers provide organizedstorage for up to (105) #40taper tools or (75) #50 tapertools and NC/CNC machiningsupplies. Pull-out frame anddrawer weight capacity,275 lbs. each.26" W x 24" D x 77"H.Interior load capacity, 2,200 lbs.75117—Smooth Blue FinishFour panel rack providesthe most versatile andefficient storage available.Assembly required.26" W x 24" D x 77"H.Interior load capacity,2,200 lbs.74066—Smooth Blue Finish

Drawers and pull-out frames have full extension tracks mounted in the slotted rack walls. Tracks can easily beadjusted up or down. No bolts or tools needed. Weight capacity per drawer and frame is 275 lbs. (125 kgs.).A.B.C.D.E.F.To fill racks with a desired drawercombination, the combination of drawerfront heights (mm) can not exceed theusable height of the rack (mm).Drawers for Tool Storage Racks 75413,75416, 74066 and 74067A. Model 76270—22"W x 22"D x 3"H. (75 mm)B. Model 76271—22"W x 22"D x 4 3 Ú8"H. (112.5 mm)C. Model 76272—22"W x 22"D x 6"H. (150 mm)C. Model 76273—22"W x 22"D x 8 7 Ú8"H. (225 mm)D. Model 76208—Adjustable tool holder kit.Holds up to five rows of sockets.D. Model 76531—Adjustable tool holder kit.Holds up to four rows of socket nos.70094, 70096, 70026 and 70027.E. Model 76314—Pull-out FrameD and E Combined = 4 3 Ú8"H (112.5 mm)F. Model 76305—Pull-out Shelf22"W x 22"D x 3"H. (75 mm)Plastic Groove KitA simple way to store reamers, taps and drill bits.Trays clip together. Made of polystyrol in red.5 7 Ú8" W x 5 7 Ú8" D x 1 1 Ú4"H.Rack Overall UsableModel Height Height75413/75416 32" high 675 mm74066/74067 77" high 1803 mmPlastic Groove KitModel 76311Includes:4 rows, 1.4"W, 20 Dividers5 rows, 1.9"W, 25 Dividers2 rows, 3"W, 15 DividersDivider Sets For Tool Storage RacksAdjustable, metal divider sets are available for 22 x 22" drawers.Drawer No. of EDP.Height Compartments Order No.3" 25 772774" 25 772786" 25 772793" 16 772814" 16 772826" 16 772833" 9 772884" 9 772896" 9 772903" 4 772964" 4 772976" 4 772984 compartments 9 compartments 16 compartments 25 compartmentsDRAWERS & DRAWERDIVIDER ACCESSORIESCLOSEDDETAILOPENSideframeAngle barsBars with holesIn the Pull-out Framewith a kit, it is possibleto have up to four andSocketfive rows of socketswith up to eight sockets102per row.102Socket No. Sockets No. SocketsSize Per Row Per Frame30 Taper 8 4040 Taper 7 3550 Taper 5 25*Safety Note: Drawers shouldnever be used for storing toolsin trolleys. Trolley could tipover causing personal injury.Plastic BoxesHold small parts andelectronic components.Made of polystyrol inred. Each kit fills one22" W x 22" D drawer.Boxes are 2.4"H.EDPDescription Components Order No.49 Box Kit (36) 3" x 3", (12) 3" x 4", (1) 4" x 4" 7726342 Box Kit (26) 3" x 4", (12) 3" x 3", (4) 4" x 4" 7726628 Box Kit (18) 3" x 6", (3) 4" x 6", 77264(6) 3" x 4", (1) 4" x 4"16 Box Kit (9) 6" x 6", (6) 4" x 6", (1) 4" x 4" 77265Collet HoldersA 22"W x 22"D Susta/Kennedydrawer will hold four plates.Combine an AdjustableTool Holder Kit (D) andPull Out Frame (E) toachieve maximum toolstorage and efficiency.Each collet platemeasures21.5"L x 5.5"W.EDP No. of Hole ModelOrder No. Height Holes Diameter No.76088 1.00" 42 .886" DA0018, ER2076089 .50" 144 .314" DA003076090 .75" 105 .472" DA0020, ER1176091 .75" 60 .688" DA0010, ER1676092 1.50" 16 1.890" TG150, ER40, 16C76096 1.00" 39 .985" CP P3, ER25,TG75, R876098 1.25" 36 1.340" TG100, 5C, ER32Bilz Holders76078 1.25" 52 .768" Bilz #176079 1.50" 16 1.240" Bilz #253Drawers & Drawer Divider Accessories

Numeric Index54Model Description Page1018 ................18” Cantilever Tool Box ....................................................211022 ................22” Cantilever Tool Box ....................................................2110350 ..............All Welded Storage Cabinet ..............................................3210491 ..............Pro-Line Maintenance Cart............................................1210492 ..............Pro-Line Maintenance Cart............................................1210493 ..............Pro-Line Maintenance Cart............................................1210494 ..............Pro-Line Maintenance Cart............................................1210495 ..............Pro-Line Maintenance Cart............................................1212008 ..............Portable Parts Storage ........................................................2312012 ..............Portable Parts Storage ........................................................2312023 ..............Portable Parts Storage ........................................................2312024 ..............Portable Parts Storage ........................................................2312036 ..............Portable Parts Storage ........................................................2312108 ..............Portable Parts Storage ........................................................2312112 ..............Portable Parts Storage ........................................................231500 ................10-Gun KenCraft Gun Cabinet ........................................221501 ................10-Gun KenCraft Gun Cabinet ........................................221510 ................5-Gun KenCraft Gun Cabinet ..........................................221520 ................14-Gun KenCraft Gun Cabinet ........................................221530 ................KenCraft Add-on Cabinet..................................................221547 ................KenCraft Pistol Box ............................................................221550 ................KenCraft Deluxe Reloading Bench ..................................221558 ................Chip Tray Work Station......................................................29182 ..................2-Shelf Roller Cabinet Hang-on........................................16185 ..................5-Drawer Roller Cabinet Hang-on ..................................16185X ................5-Drawer Roller Cabinet Hang-on ..................................162005 ................5-Drawer Roller Cabinet ....................................................21202 ..................2-Shelf Roller Cabinet Hang-on........................................16205 ..................5-Drawer Roller Cabinet Hang-on ..................................16205X ................5-Drawer Roller Cabinet Hang-on ..................................16220 ..................2-Drawer Portable Tool Chest ..........................................212600 ................26” Chest Riser ....................................................................202602 ................2-Drawer Mechanic’s Chest Base ....................................202603 ................3-Drawer Mechanic’s Chest Base ....................................202604 ................4-Drawer Mechanic’s Chest Base ....................................20263 ..................3-Drawer Mechanic’s Chest ..............................................20266 ..................6-Drawer Mechanic’s Chest ..............................................192700MP ..........5-Drawer Maintenance Pro Chest ................................102701MP ..........5-Drawer Maintenance Pro Chest ................................102702MP ..........6-Drawer Maintenance Pro Cabinet ............................102703MP ..........6-Drawer Maintenance Pro Cabinet ............................102705X ..............5-Drawer Mechanic’s Chest ..............................................19273 ..................3-Drawer Roller Cabinet ....................................................14273KC ............3-Drawer KenCraft Roller Cabinet ..................................22273X ................3-Drawer Roller Cabinet ....................................................14275 ..................5-Drawer Roller Cabinet ....................................................14275KC ............5-Drawer KenCraft Roller Cabinet ..................................22275X ................5-Drawer Roller Cabinet ....................................................14276KC ............6-Drawer Roller Cabinet ....................................................22277 ..................7-Drawer Roller Cabinet ....................................................14277X ................7-Drawer Roller Cabinet ....................................................142805 ................5-Drawer Mechanic’s Chest ..............................................202805X ..............5-Drawer Mechanic’s Chest ..............................................202806 ................6-Drawer Mechanic’s Chest ..............................................1928077 ..............7-Drawer Painted Cleanroom Cabinet ............................3328085 ..............5-Dr. Stainless Steel Cleanroom Cabinet ........................3328087 ..............7-Dr. Stainless Steel Cleanroom Cabinet ........................332812 ................12-Drawer Mechanic’s Chest ............................................1928197 ..............7-Dr. Stainless Steel Cleanroom Cabinet ........................3328220 ..............2-Dr. Stainless Steel Cleanroom Chest ............................3328264 ..............4-Dr. Stainless Steel Cleanroom Chest ............................33283KC ............3-Dr. KenCraft Medium Duty Chest................................22284KC ............4-Dr. KenCraft Medium Duty Chest................................22285 ..................5-Drawer Mechanic’s Chest ..............................................20285KC ............5-Dr. KenCraft Medium Duty Chest................................22285X ................5-Dr. Mechanic’s Chest/Ball-bearing Slides ..................202902 ................2-Drawer Mechanic’s Chest Base ....................................202905X ..............5-Dr. Mechanic’s Chest/Ball-bearing Slides ..................1929077 ..............7-Dr. Painted Cleanroom Roller Cabinet ........................332907X ..............7-Drawer Roller Cabinet/Ball-bearing Slides ..................92912X ..............12-Dr. Mechanic’s Chest/Ball-bearing Slides ..................9295 ..................5-Drawer Roller Cabinet ....................................................14295X ................5-Dr. Roller Cabinet/Ball-bearing Slides ........................14297 ..................7-Drawer Roller Cabinet ....................................................14297LX ..............7-Dr. Roller Cabinet w/Dr. Interlock ..............................17297X ................7-Dr. Roller Cabinet/Ball-bearing Slides ........................14300MP ............2-Shelf MP Hang-on Cabinet ............................................10301MP ............2-Shelf MP Hang-on Cabinet ............................................10302 ..................2-Shelf Roller Cabinet Hang-on Cabinet ........................16305X ................5-Drawer Maintenance Chest............................................13306X ................6-Dr. Hang-on Cabinet/Ball-bearing Slides....................16310X ................10-Dr. Maintenance Cart/Ball-bearing Slides ................13315X ................15-Dr. Maintenance Cart/Ball-bearing Slides ................133400MP ..........5-Dr. Maintenance Pro Chest ........................................103401MP ..........5-Dr. Maintenance Pro Chest ........................................103402MP ..........6-Dr. Maintenance Pro Roller Cabinet ........................103403MP ..........6-Dr. Maintenance Pro Roller Cabinet ........................103407X ..............7-Drawer Roller Cabinet/Ball-bearing Slides ..................93412X ..............12-Dr. Mechanic’s Chest/Ball-bearing Slides ..................9348X ................8-Dr. Roller Cabinet/Ball-bearing Slides ........................15360 ..................10-Drawer Mechanic’s Chest ............................................193611 ................11-Drawer Machinist’s Chest ............................................18376X ................6-Dr. Roller Cabinet/Ball-bearing Slides ........................15378LX ..............8-Dr. Roller Cabinet w/Dr. Interlock ..............................17378X ................8-Dr. Roller Cabinet/Ball-bearing Slides ........................15380MP ............2-Shelf MP Hang-on Cabinet ............................................10381MP ............2-Shelf MP Hang-on Cabinet ............................................10382 ..................2-Shelf Roller Cabinet Hang-on Cabinet ........................16386X ................6-Dr. Roller Cabinet Hang-on Cabinet ............................163900MP ..........8-Dr. Maintenance Pro Maintenance Cart ..................113901MP ..........8-Dr. Maintenance Pro Maintenance Cart ..................1140001 ..............HMS Series Housing, Tan..............................................4540002 ..............HMS Series 2” Drawer, Tan ..........................................4540004 ..............HMS Series 4” Drawer, Tan ..........................................4540006 ..............HMS Series 6” Drawer, Tan ..........................................4540008 ..............HMS Series 8” Drawer, Tan ..........................................4540011 ..............HMS Series Housing, Blue ............................................45Model Description Page40095 ..............HMS Series 5-Dr. Cabinet, Tan......................................4540096 ..............HMS Series 6-Dr. Cabinet, Tan......................................4540097 ..............HMS Series 7-Dr. Cabinet, Tan......................................4540102 ..............HMS Series 2” Drawer, Blue ........................................4540104 ..............HMS Series 4” Drawer, Blue ........................................4540106 ..............HMS Series 6” Drawer, Blue ........................................4540108 ..............HMS Series 8” Drawer, Blue ........................................4540195 ..............HMS Series 5-Dr. Cabinet, Blue ....................................4540196 ..............HMS Series 6-Dr. Cabinet, Blue ....................................4540197 ..............HMS Series 7-Dr. Cabinet, Blue ....................................45415 ..................5-Drawer Versa-Cart ® Tool Cart........................................17415X ................5-Dr. Versa-Cart ® /Ball-Bearing Slides..............................1742001-05..........HMS Series 5-Dr. Cabinet, Tan......................................4542010 ..............HMS Series Mobility Kit ................................................45435 ..................5-Drawer Versa-Cart ® Tool Cart........................................17435X ................5-Dr. Versa-Cart ® /Ball-Bearing Slides..............................174400MP ..........10-Dr. Maintenance Pro Maintenance Cart ................114401MP ..........10-Dr. Maintenance Pro Maintenance Cart ................114405 ................5-Dr. Extended Chest/Ball-Bearing Slides........................94410 ................10-Dr. Extended Cabinet/Ball-Bearing Slides ..................946000 ..............8-Drawer 46” Benchmark ® Chest ......................................846001 ..............8-Drawer 46” Benchmark ® Chest ......................................846002 ..............8-Drawer 46” Benchmark ® Chest ......................................846003 ..............8-Drawer 46” Benchmark ® Cabinet....................................846004 ..............8-Drawer 46” Benchmark ® Cabinet....................................846005 ..............8-Drawer 46” Benchmark ® Cabinet....................................84800MP ..........10-Dr. MP Versa-Bench ® ....................................................114801MP ..........10-Dr. MP Versa-Bench ® ....................................................114804 ................4-Drawer Versa-Bench ® ......................................................264806 ................6-Drawer Versa-Bench ® ......................................................264806R ..............6-Drawer Versa-Bench ® ......................................................264810R ..............10-Drawer Versa-Bench ® ....................................................2650002 ..............2-Panel Toolboard Set, Tan ................................................3050004 ..............4-Panel Toolboard Set, 30-pc. Hook Set, Tan ..................3050012 ..............2-Panel Toolboard Set, Blue ..............................................3050014 ..............4-Panel Toolboard Set, 30-pc. Hook Set, Blue ................3050022 ..............2-Panel Toolboard Set, Gray..............................................3050024 ..............4-Panel Toolboard Set, 30-pc. Hook Set, Gray................3050032 ..............2-Panel Toolboard Set, Green ............................................3050034 ..............4-Panel Toolboard Set, 30-pc. Hook Set, Green ..............3050050 ..............Panel Brace Supports....................................................30, 4850054 ..............Panel Angle Brackets..........................................................4850061-64..........Louvered Panel Sets ..........................................................3050100 ..............Open Tool Trolley Base ......................................................3250102 ..............Open Tool Trolley, Panels, Hook Set ................................3250104 ..............Open Tool Trolley, Panels ..................................................3250230 ..............Toolboard Wall Mounted Cabinet ....................................3250260 ..............Toolboard Wall Mounted Cabinet ....................................3250301 ..............Toolboard Mini Workshop Cabinet..................................3250308 ..............Toolboard Mini Workshop Light ......................................3251002-16..........Drawers for 24” x 24” Modular Cabinets........................405150 ................Machinist’s Chest Add-on Base ........................................1851902-8............Drawers for 24” x 24” Mobile Cabinets ..........................41520 ..................7-Drawer Machinist’s Chest ..............................................1852002-12..........NX Drawers for 30” x 24” Modular Cabinets ................3952103-16..........FX Drawers for 30” x 24” Modular Cabinets..................395220 ................20-Inch Hand Carry Box ....................................................21526 ..................8-Drawer Machinist’s Chest ..............................................1852611 ..............11-Drawer Machinist’s Chest ............................................185300MP ..........12-Dr. Maintenance Pro Maintenance Cart ................115301MP ..........12-Dr. Maintenance Pro Maintenance Cart ................115350MP ..........Maintenance Pro Canopy for 5300MP ........................115351MP ..........Maintenance Pro Canopy for 5301MP ........................1156100 ..............Modular Cabinet Workstation Fixed Leg........................4256601-08..........Modular Cabinet Workstation Components ..................4256721-25..........Modular Cabinet Workstation Components ..................425804MP ..........12-Dr. Maintenance Pro Maintenance Cart ................115805MP ..........12-Dr. Maintenance Pro Maintenance Cart ................1160003-12..........Compact Modular Cabinet Drawers................................4460009 ..............Compact Modular Cabinets, Door Assembly ................4460040 ..............Adjustable Shelf, Compact Modular Cab. ......................446006 ................6-Drawer Versa-Bench ® ......................................................276006R ..............6-Drawer Versa-Bench ® ......................................................2760101 ..............60” Benchmark ® Canopy ....................................................860102 ..............60” Benchmark ® Canopy ....................................................860103 ..............60” Benchmark ® Canopy ....................................................860121 ..............10-Dr. Benchmark ® Cabinet ................................................860122 ..............10-Dr. Benchmark ® Cabinet ................................................860123 ..............10-Dr. Benchmark ® Cabinet ................................................86012E ..............12-Drawer Versa-Bench ® ....................................................276012ER ............12-Drawer Versa-Bench ® ....................................................276012S ..............12-Drawer Versa-Bench ® ....................................................2760200 ..............Compact Modular Cabinet Housing................................4460203 ..............Compact Mobile Modular Cabinet ..................................4460205 ..............Compact Mobile Modular Cabinet ..................................4460215 ..............Compact Mobile Maintenance Bench ..............................4460218 ..............Compact Mobile Maintenance Bench ..............................4460221 ..............Compact Mobile Base Kit ..................................................4460300 ..............Compact Modular Cabinet, Housing ..............................4360306 ..............Compact Modular Cabinet................................................4360307 ..............Compact Modular Cabinet................................................4360309 ..............Compact Modular Cabinet................................................4360700 ..............Compact Modular Cabinet, Housing ..............................4360706 ..............Compact Modular Cabinet................................................4360708 ..............Compact Modular Cabinet................................................4360709 ..............Compact Modular Cabinet................................................4360SR ................12-Drawer Versa-Bench ® ....................................................2761100 ..............Undercounter Storage, Housing ......................................4361103 ..............Undercounter Storage Cabinet ........................................4361104 ..............Undercounter Storage Cabinet ........................................4361202 ..............Adjustable Shelf for 24” x 24” Cabinet............................4861203 ..............Mobile Modular Cabinet, 24” x 24” ................................4161209 ..............Mobile Mod. Cab. Housing, 24” x 24” ............................4161280 ..............Modular Cabinet Door for 24” x 24” Cabinet ................4861290 ..............Undercounter Storage, Housing ......................................4361294 ..............Undercounter Storage Cabinet ........................................4361295 ..............Undercounter Storage Cabinet ........................................43

Model Description Page61300 ..............Modular Cabinet Housing, 24” x 24” ..............................4061302 ..............Pull-out Shelf for 24” x 24” Cabinet ................................4861303 ..............Workstation Base Cabinet, 24” x 24” ........................40, 4261305 ..............Pull-out Shelf/Gussets for 24” x 24” Cab. ......................4861380 ..............Modular Cabinet Door for 24” x 24” Cabinet ................4861400 ..............Modular Cabinet Housing, 24” x 24” ..............................4061407 ..............Modular Cabinet, 24” x 24” ..............................................4061480 ..............Modular Cabinet Door for 24” x 24” Cabinet ................4861500 ..............Modular Cabinet Housing, 24” x 24” ..............................4061509 ..............Modular Cabinet, 24” x 24” ..............................................4061580 ..............Modular Cabinet Door for 24” x 24” Cabinet ................4861700 ..............Modular Cabinet Housing, 24” x 24” ..............................4061703 ..............Modular Cabinet, 24” x 24” ........................................40, 4261750 ..............Mobile Modular Cabinet, 24” x 24” ................................4161759 ..............Mobile Mod. Cab. Housing, 24” x 24” ............................4161780 ..............Modular Cabinet Door for 24” x 24” Cabinet ................48620 ..................3-Drawer Machinist’s Chest ..............................................1862202 ..............Adjustable Shelf for 30” x 24” Cabinets ..........................4862302 ..............Pull-out Shelf for 30” x 24” Cabinets ..............................4862305 ..............Pull-out Shelf w/Gussetts for 30” x 24” Cab..................4862400 ..............Modular Cabinet Housing, 30” x 24” ..............................3962407 ..............Modular Cabinet, 30” x 24” ..............................................3962500 ..............Modular Cabinet Housing, 30” x 24” ..............................3962509 ..............Modular Cabinet, 30” x 24” ..............................................3962580 ..............Modular Cabinet Door for 30” x 24” Cabinet ................4862600 ..............Modular Cabinet Housing, 30” x 24” ..............................3962610 ..............Modular Cabinet, 30” x 24” ..............................................3962780 ..............Modular Cabinet Door for 30” x 24” Cabinet ................4863002-8............NX Drawers for 30” x 30” Modular Cabinets ................3763103-16..........FX Drawers for 30” x 30” Modular Cabinets..................3763202 ..............Adjustable Shelf for 30” x 30” Cabinets ..........................4863300 ..............Machine/Work Station Housing, 30” x 30”....................3763302 ..............Pull-out Shelf for 30” x 30” Cabinets ..............................4863303 ..............Machine/Work Station Cabinet, 30” x 30” ....................3763305 ..............Pull-out Shelf w/Gussets for 30” x 30” Cab ..................4863350 ..............Mobile Modular Cabinet, 30” x 30” ................................4163359 ..............Mobile Mod. Cab. Housing, 30” x 30” ............................4163380 ..............Modular Cabinet Door for 30” x 30” Cabinet ................4863400 ..............Modular Cabinet Housing, 30” x 30” ..............................3663405-12..........Modular Cabinet Combinations, 30” x 30” ....................3663416-19..........Modular Cabinet Combinations, 30” x 30” ....................3663480 ..............Modular Cabinet Door, 30” x 30” ....................................4863600 ..............Modular Cabinet Housing, 30” x 30” ..............................3663605-6............Modular Cabinet Combinations, 30” x 30” ....................3663609-12..........Modular Cabinet Combinations, 30” x 30” ....................3663616-21..........Modular Cabinet Combinations, 30” x 30” ....................3663680 ..............Modular Cabinet Door, 30” x 30” ....................................4863902-08..........Drawers for 30” x 30” Mobile Modular Cabinets ..........4164103-16..........FX Drawer for 44” x 30” Modular Cabinets ..................3864202 ..............Adjustable Shelf for 44” x 30” Cabinets ..........................4864302 ..............Pull-out Shelf for 44” x 30” Cabinets ..............................4864305 ..............Pull-out Shelf w/Gussets for 44” x 30” Cab ..................4864400 ..............Modular Cabinet Housing, 44” x 30” ..............................3864406-10..........Modular Cabinet Combinations, 44” x 30” ....................3864480 ..............Modular Cabinet Door, 44” x 30” Cabinets ....................4864600 ..............Modular Cabinet Housing, 44” x 30” ..............................3864606-10..........Modular Cabinet Combinations, 44” x 30” ....................3864680 ..............Modular Cabinet Door, 44” x 30” Cabinets ....................4866200 ..............Modular Cab. Workstation Adjustable Leg ....................4266606 ..............Modular Cab. Workstation Foot Rest ..............................4266726 ..............Modular Cab. Workstation Foot Rest ..............................4268013 ..............Mobile Workstation Bottom Shelf ....................................4368911 ..............Mobile Work Station Combination ..................................4368913 ..............Mobile Work Station Combination ..................................4369023-24..........Divider Kit for Compact Mod. Drawers ........................4469063-64..........Divider Kit for Compact Mod. Drawers ........................4469069-94..........Divider Kit for Compact Mod. Drawers ........................4469104 ..............Stationary Workstation Combination ..............................4269140 ..............Stationary Workstation Combination ..............................4269146 ..............Stationary Workstation Combination ..............................4269148 ..............Stationary Workstation Combination ..............................4270005 ..............Universal Tool Tray Brackets ............................................5070020-27..........HSK-A System Sockets ......................................................5070030-33..........Kennametal KM ® Plastic Sockets......................................5070051-53..........Plastic Sockets......................................................................5070056-59..........Plastic Sockets......................................................................5070060 ..............Tool Tray ..............................................................................5070062 ..............Socket Frame for ToolKart ............................................5170063-67..........Plastic Sockets......................................................................5070070 ..............Tool Tray ..............................................................................5070084-85..........CutterKart Tool Holder Plate ........................................5170090-96..........Plastic Socket ......................................................................5070100 ..............Plastic Socket ......................................................................5071103-08 ..........Sandvik Capto System Plastic Sockets ........................5072001 ..............ToolKart ............................................................................5172006 ..............Tool Trolley Add-on Steel Shelf ........................................5172007 ..............NC/CNC Tool Trolley........................................................5172008 ..............Tool Trolley Steel Shelf ......................................................5172010 ..............Tool Trolley Steel Shelf ......................................................5172045 ..............Tool Trolley Add-on Steel Shelf ........................................5173030 ..............Pre-configured ToolKart ................................................5173040 ..............Pre-configured ToolKart ................................................5173050 ..............Pre-configured ToolKart ................................................5173154 ..............Pre-configured NC/CNC Tool Trolley ............................5173240 ..............Pre-configured ToolKart ................................................5173250 ..............Pre-configured ToolKart ................................................5174021 ..............Three-tiered Bench Stand ..................................................5074023 ..............Two-tiered Bench Stand ....................................................5074066 ..............Four-panel 77” High Tool Storage Rack ..........................5274075 ..............Back Panel for 77” High Tool Storage Rack....................5274076 ..............Door for 77” High Tool Storage Rack ..............................5274168 ..............Side Panel Set for 77” High Tool Storage Rack ..............5274408 ..............Side Panel Set for 32” High Tool Storage Rack ..............5274413 ..............53” Wide Document Shelf..................................................5274414 ..............79” Wide Document Shelf..................................................5274415 ..............53” Wide Wood Top............................................................5274416 ..............79” Wide Wool Top ............................................................52Model Description Page74419 ..............53” Long Table Support ....................................................5274422 ..............79” Long Table Support ....................................................5274433 ..............Door for 32” High Rack ....................................................5275112 ..............Pre-configured Tool Storage Rack ....................................5275117 ..............Pre-configured Tool Storage Rack ....................................5275122 ..............Pre-configured Tool Storage Rack ....................................5275413 ..............32” High Tool Storage Rack ..............................................5275601 ..............Pre-configured Ministore ® ................................................5276078-79..........Bilz Holders ........................................................................5376088-98..........Collet Holders......................................................................5376208 ..............Adjustable Tool Holder Kit ..............................................5376209 ..............Socket Partition for Modular Cabinet Drawers ............3776270-73..........Drawers for Tool Storage Racks........................................5376305 ..............Pull-out Shelf for Tool Storage Racks ..............................5376311 ..............Plastic Groove Kit ..............................................................5376314 ..............Pull-out Frame for Tool Storage Racks............................5376531 ..............Adjustable Tool Holder Kit ..............................................5377263-66..........Plastic Box Kits ....................................................................5377277-98..........Divider Sets For Tool Storage Racks ................................5380813-15..........Drawer Liner for Modular Cabinets ................................4780991-92..........Felt Drawer Liner Kit for Modular Cabinets..................4785532 ..............Square 1 Toolholder System ..........................................2385570 ..............Square 1 Toolholder System ..........................................2391066-80..........Drawer Height Extensions for Modular Cabinet ..........4891102-91344 ....Drawer Divider Sets for 24” x 24” Mod. Cabinets ........4092122-92744....Drawer Divider Sets for 30” x 24” Mod. Cabinets ........3993102-93774....Drawer Divider Sets for 30” x 30” Mod. Cabinets ........3795213-95644....Drawer Divider Sets for 44” x 30” Mod. Cabinets ........3896162-64..........Plastic Box Sets for 24” x 24” Modular Cabinets ..........4796252-54..........Plastic Box Sets for 30” x 30” Modular Cabinets ..........4796282-84..........Plastic Box Sets for 24” x 24” Modular Cabinets ..........4796353-54..........Plastic Box Sets for 44” x 30” Modular Cabinets ..........4796372-74..........Plastic Box Sets for 30” x 30” Modular Cabinets ..........4796492-94..........Plastic Box Sets for 24” x 30” Modular Cabinets ..........4796502-04..........Plastic Box Sets for 30” x 30” Modular Cabinets ..........4796812-14..........Plastic Box Sets for 30” x 30” Modular Cabinets ..........4799001-04..........Modular Cabinet Bottom Shelves ....................................4899012-54..........Modular Cabinet Drawer Partitions ................................4699103-99344....Modular Cabinet Drawer Subdividers............................4699500-05..........Plastic Groove Trays and Dividers ..................................4799511-13 ..........Prism Racks..........................................................................4699521-28..........Milling Tool Holders ..........................................................4799531-33..........Tool Holders/Angular Rests ............................................4699540-43..........Bottom Support Brackets for NC/CNC Tool Trays ......4899572-94..........Plastic Boxes ........................................................................4799606-99746....Fork Lift Bases for Modular Cabinets..............................4899820-48..........Toolboard Steel Tool Holders............................................3199850 ..............Mobile Workstation Drawer..............................................4399852-53..........Toolboard Tool Holder Sets ..............................................3099876 ..............Toolboard Cable Loop Hook Sets ....................................31DO26 ..............Workstation Security Door ................................................28DR264X ..........Workstation Drawer Package............................................29DR265 ............Workstation Drawer Package............................................29DR265X ..........Workstation Drawer Package............................................29DS1 ..................Roller Cabinet Foldaway Shelf ........................................17K20 ..................Professional Tool Boxes......................................................21K24 ..................Professional Tool Box ........................................................21K32X................Professional Tool Box ........................................................21MC22 ..............Machinist’s Chest Base ......................................................18MC28 ..............Machinist’s Chest Base ......................................................18S5405X ............5-Drawer Workstation w/Ball-bearing Slides ................28S5410X ............10-Drawer Workstation w/Ball-bearing Slides ..............28TS261X............1-Drawer Tool Stand w/Ball-bearing Slides ..................29TS265X............5-Drawer Tool Stand w/Ball-bearing Slides ..................29VBLEGS..........Versa-Bench ® Stationary Legs............................................26VBT48 ............Versa-Bench ® Towing Package, 48” Benches ..................26VBT60 ............Versa-Bench ® Towing Package, 60” Benches ..................26W5405X ..........5-Drawer Workstation w/Ball-bearing Slides ................28W5410X ..........10-Drawer Workstation w/Ball-bearing Slides ..............28WC28 ..............Wall Storage Cabinet ..........................................................29WS5405 ..........5-Drawer Workstation w/Steel Top ................................28WS5410 ..........10-Drawer Workstation w/Steel Top ..............................28WT48 ..............Versa-Bench ® 48” Maple Top ............................................27WT60 ..............Versa-Bench ® 60” Maple Top ............................................27WT6024 ..........60” x 24” Work Bench Maple Top ....................................44WT6030 ..........60” x 30” Work Bench Maple Top ....................................42WT7224 ..........72” x 24” Work Bench Maple Top ....................................44WT7230 ..........72” x 30” Work Bench Maple Top ....................................42WW5405 ........5-Drawer Workstation w/Friction Slides........................28WW5410 ........10-Drawer Workstation w/Friction Slides......................2855Numeric Index

®TOOL BOXESCHESTS/CABINETSWORK STATIONSMODULAR CABINETS®Steel ToolboardSystemsStainless SteelCabinetsModular StorageSystemsA1000 Rev. 4/05 ©Kennedy Mfg. Co.Kennedy Manufacturing Co. • 520 E. Sycamore Street • Van Wert, OH 45891-1377Phone 800-413-8665 • 419-238-2442 • FAX 419-238-5644 • www.kennedymfg.comLitho in U.S.A