pdf download - Diebold HSK

E-TWO with PYROquart chucksThe Marquart Pyroquart line for High Productivity Cutting (HPC)With the advent of High-Speed Cutting (HSC), toolholders with extremely thin wall crosssectionswere required. In response, Diebold developed the MS 502, a low-energy,programmed-pulse inductant unit to reliably heat these smaller toolholders without damagingthem.By taking advantage of the years of combined R & D programs, the ThermoGrip® Group hasbeen able to offer these and other fine ThermoGrip® ShrinkFit products.MS 502 with air chiller and toolsDiebold is an innovator in the manufacture of toolholders and high-frequency spindles. Notcontent to play catch-up, Diebold recently introduced it’s patented JetSleeve® system.JetSleeve® uses an aluminum sleeve with several coolant outlets to introduce coolant, MQL,or air-blast directly to the tool-tip during machining. As the cutter advances, chips arecontinuously blown-out of the work area, eliminating cutter damage and chatter, even in thedeepest cavities.