Industrial Hydraulics Hydraulic and Electronic Components

Индастриал Технолоджис www.ind-techno.com.ua +38 044 596 04 29Bosch Rexroth AG Hydraulics21PumpsExternal gear pumps• Sizes NG1 to 28• Series B and F• Plain bearings for high loads• Drive shafts according to ISO or SAE and customer-specific standards• Combination of several pumps possible• Line connections: connecting flanges or female threads• Pumps with threaded connections have reduced admissible pressuresType AZPSeries B, componentseries 1XNG 1 2 3 4 5Displacement V g maxcm³ 1 2 3 3.8 4.6Operating pressure, continuousp 1 maxbar 210 210 210 190 140Operating pressure, intermittentp 2bar 230 230 230 210 160Max. speed at p2 n rpm 6000 5000 4000 4000 4000Min. speed at p2 n rpm 1000 850 750 750 750Series B, componentseries 2XNG 1 2 2.5 3 4 4.5 5 6 7Displacement V g maxcm³ 1 2 2.5 3.15 4 4.5 5 6.3 7.1Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 225 200Operating pressure, intermittentp 2bar 280 280 280 280 280 280 280 255 200Max. speed at p2 n rpm 6000 5000 5000 4000 4000 4000 4000 3500 3500Min. speed at p2 n rpm 750 750 750 750 750 750 750 750 750Series F, componentseries 1XNG 4 5 8 11 14 16 19 22 22 1)Displacement V g maxcm³ 4 5.5 8 11 14 16 19 22.5 22.5Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 210 180 210Operating pressure, intermittentp 3bar 280 280 280 280 280 280 230 210 230Max. speed at p2 n rpm 4000 4000 4000 3500 3000 3000 3000 2500 3000Min. speed at p2 n rpm 700 700 700 600 500 500 500 500 500Series F, componentseries 2XNG 4 5 8 11 14 16 19 22 25 28Displacement V g maxcm³ 4 5.5 8 11 14 16 19 22.5 25 28Operating pressure, continuousp 1 maxbar 250 250 250 250 250 250 250 220 195 170Operating pressure, intermittentp 3bar 280 280 280 280 280 280 280 250 225 200Max. speed at p2 n rpm 4000 4000 4000 3500 3000 3000 3500 3500 3000 3000Min. speed at p2 n rpm 700 700 700 600 500 500 500 500 500 500Detailed information:RE 10087RE 10089Note:‒ The maximum pressuresof versions with claw aresometimes reduced!- Applicable to an oil viscosityof 25 mm2/s and anoil temperature of 55 °Cwith HLP 46.- The pressure in the suctionport is 0.7 bar min and3 bar max absolute.1)With extended bearingsIndustrial Technologies