Quick Coupling Products - LSR Distribuidor
Share Embed Flag
Download ePaper

Quick Coupling Products - LSR Distribuidor

Quick Coupling Products - LSR Distribuidor Quick Coupling Products - LSR Distribuidor

lsrdistribuidor.com.mx
from lsrdistribuidor.com.mx More from this publisher
13.07.2015 Views

Hydraulic Quick CouplingsHigh Pressure Couplings1141 SeriesCouplerBodyThreadSize Part Size Dimensions Wt. (LB.)(in.) No. NPTF (in.) P/PieceA B1/4 1141-62 1/4-18 2.75 1.00 0.40AB HydraulicsBApplicationsThe 1141 Series is a general purpose coupling forhigh pressure connect-under-pressure applications.Features• 303 Stainless steel body.• Brass locking sleeve• Polyurethane seals to resist extrusion and abrasion.• Self locking threads help prevent coupling from accidentallydisconnecting.• Visual makeup – when fully coupled the edge of the sleevewill be flush with the end of the male thread – giving avisual check for complete coupling.• Small diameter mating seal helps keep separation forces toa minimum, allowing for easier connect and disconnect atpressures up to 5,000 PSI.• 10,000 PSI working pressure, 17,000 PSI intermittentpressure.• Dust caps and plugs included.NippleBodyThreadSize Part Size Dimensions Wt. (LB.)(in.) No. NPTF (in.) P/PieceC D1/4 1141-63 1/4-18 2.00 .88 0.26CDSpecificationsBody Size (in.) 1/4Rated Pressure (PSI) 10,000Rated Connect-Under-Pressure Capability (PSI) 5000Rated Flow (GPM) 3Temperature Range (Polyurethane seals) -30° to +180°FVacuum test20 in/HgTorque to connect at 1000 PSI47 in/lbs.B-47Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings

Hydraulic Quick CouplingsMold Coolant Line CouplingsMoldmate SeriesApplicationsB HydraulicsParker moldmate couplings are specifically designed for connectingcoolant lines to molds and dies, on injection moldingmachinery in the plastics and die casting industries.Moldmate couplings significantly reduce machine downtimeby providing fast and easy connection of coolant lines duringmold changes. Their short nipples can be recessed below thesurface of the mold for more efficient storage of molds.Moldmate couplers are available with or without valves in thefemale half. Non-valved couplers provide maximum flow forefficient cooling. Valved couplers shut off when disconnected.Special Order InformationStandard seal material is Silicone and is compatible withwater and water glycol fluids commonly used in heat transfersystems. Fluorocarbon seals are available for use only withoil-based media and not with water glycol. To specify aFluorocarbon seal, add the suffix “Y” to the standardmoldmate part number, thus: PC206Y.Selection GuidelinesMoldmate couplings are designed for a maximum workingpressure of 200 PSI. Most thermoplastic and thermoset heattransfer systems have pumps which provide relatively highflow rates at relatively low pressures. Water and water glycolsystems usually have capacities ranging from 10 to 40 gpm,with most from 10 to 15 gpm. Normal medial openingpressures are 20 to 60 PSI for these systems. Heat transfersystems using oil generally operate from 10 to 30 PSI.However, their flow rates are usually much higher, requiringthe total volume of oil to be circulated at least once perminute.The number of hose connections in a single mold systemresults in a cumulative pressure drop. Please note thePressure Drop vs. Flow Rate chart provided, to select theappropriate size.Temperature is another important consideration. Parkermoldmate couplings with their standard Silicone seal have atemperature capability of -90° to +400°F. Rapid deteriorationof the seal and leakage may result if used beyond theselimits.External conditions of temperature, corrosive atmospheres,and other abnormalities may affect coupling performance andmust be considered when selection is made. Consult factorywith questions.SpecificationsBody Size (in.) 1/4 3/8 1/2Rated Pressure (PSI) 200 200 200Rated Flow (GPM) 3 6 12MaterialStandard Silicone seal*Optional Fluorocarbon seal* For use with oil based media onlyPressure Drop in PSIDPerformance50454035302520151051/4" ValvedMoldmate Series (1/4", 3/8", 1/2")Test Fluid: Water (Straight Coupler)1/4" Non-valvedTemperature Range-90˚ to +400˚F3/8" Valved-15˚ to +400˚F3/8" Non-valved1/2" Non-valved00 2 4 6 8 10 12 14 16 18Flow in USGPMB-48Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings

Hydraulic <strong>Quick</strong> <strong>Coupling</strong>sHigh Pressure <strong>Coupling</strong>s1141 SeriesCouplerBodyThreadSize Part Size Dimensions Wt. (LB.)(in.) No. NPTF (in.) P/PieceA B1/4 1141-62 1/4-18 2.75 1.00 0.40AB HydraulicsBApplicationsThe 1141 Series is a general purpose coupling forhigh pressure connect-under-pressure applications.Features• 303 Stainless steel body.• Brass locking sleeve• Polyurethane seals to resist extrusion and abrasion.• Self locking threads help prevent coupling from accidentallydisconnecting.• Visual makeup – when fully coupled the edge of the sleevewill be flush with the end of the male thread – giving avisual check for complete coupling.• Small diameter mating seal helps keep separation forces toa minimum, allowing for easier connect and disconnect atpressures up to 5,000 PSI.• 10,000 PSI working pressure, 17,000 PSI intermittentpressure.• Dust caps and plugs included.NippleBodyThreadSize Part Size Dimensions Wt. (LB.)(in.) No. NPTF (in.) P/PieceC D1/4 1141-63 1/4-18 2.00 .88 0.26CDSpecificationsBody Size (in.) 1/4Rated Pressure (PSI) 10,000Rated Connect-Under-Pressure Capability (PSI) 5000Rated Flow (GPM) 3Temperature Range (Polyurethane seals) -30° to +180°FVacuum test20 in/HgTorque to connect at 1000 PSI47 in/lbs.B-47<strong>Quick</strong> <strong>Coupling</strong> Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!