Quick Coupling Products - LSR Distribuidor

Hydraulic Quick CouplingsConnect Under Pressure Couplings6100 SeriesApplicationsParker’s 6100 Series, is a thread-to-connect low spill couplingthat can be used in a wide range of industrial applicationswhere connected under pressure is required. The 6100 isideal for connecting hydraulic lines on oil field equipment likepower tongs, swivels and mobile drilling rigs. It is also widelyused on dump trailers to connect the tractor to wet-linehydraulic systems.The 6100 Series is suitable for many applications wherehigh flow connect under pressure couplings are required.Other uses include: submersible pumps, engine test stands,and bulk liquid CO2 transfer (Special part numbers apply –contact the Division).B HydraulicsNote: Protective dust plugs and caps play a crucial role in thelife of a quick coupling and no purchase of a hydraulic quickcoupling is complete without the selection of an appropriatedust plug and cap. See pages noted in Table of Contents fordust plugs and caps for the Parker full line of hydrauliccouplings.SpecificationsBody Size (in.) 3/4 3/4 1 1-1/4 1-1/2Dash Number -08 -12 -16 -20 -24*Rated Pressure (PSI)Female Half 3000 3000 3000 2750 2000Male Half 3000 3000 3000 2500 2500Complete Coupling Assembly 3000 3000 3000 2750 2500Rated Flow (GPM) 12 28 50 76 100Temperature Range (std seals)-40° to +250°F.* Minimum burst pressure is equal to three times the ratedpressure. Not recommended for continuous hydraulic impulseapplications at rated pressures.PerformancePressure Drop in PSID1009080706050403020101/2"6100 Series (1/2" & 3/4")Test Fluid: OIL 150 SUS3/4"00 5 10 15 20 25 30 35 40Flow in USGPM706100 Series (1", 1-1/4", 1-1/2")Test Fluid: OIL 150 SUS60Pressure Drop in PSID504030201"1-1/4"1-1/2"1000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150Flow in USGPMB-35Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings