Quick Coupling Products - LSR Distribuidor

Hydraulic Quick CouplingsNon-Spill CouplingsFH SeriesFeatures• 10,000 PSI operating pressure (700 bar).• Flush face, non-spill valving, both halves.• Sleeve on coupler and nipple body have a RED finish foridentification purposes.• Simple Push-To-Connect operation.• Sleeve-Lock to prevent accidental disconnect.• Non interchangeable with low pressure flush face couplings.• Meets performance and dimensional specifications ofHTMA requirements, 10,000 PSI (700 bar).• Anti Blow-Out Nitrile/PTFE bonded nipple seal.B HydraulicsApplicationsDescriptionParker FH Series high pressure couplings are an innovativeproduct combining the advantages of a flush-face design witha highly technical performance of a rated pressure of 10,000PSI. For safety purposes, this product does not interchangewith flush-face couplings having a lower pressure rating.• Hydraulic Crimpers, Cutters, Jacks, Benders, Clamps,Wedges• Rescue Equipment• High Pressure Test EquipmentNote: Protective dust plugs and caps play a crucial role in thelife of a quick coupling and no purchase of a hydraulic quickcoupling is complete without the selection of an appropriatedust plug and cap. See pages noted in Table of Contents fordust plugs and caps for the Parker full line of hydrauliccouplings.Pressure Drop in PSIDPerformance454035302520151050FH Series (3/8")Test Fluid: Oil - 200 SUS3/8"0 1 2 3 4 5 6 7 8 9Flow in USGPMMaterials of ConstructionBody: SteelFinish:Valve:Seal:Zinc Plated with yellow Chromate.Sleeve and Nipple plated with Red Chromate.Flush Face ValvesAnti blow-out Nitrile/PTFE bonded seal( nipple only)SpecificationsBody Size (in.) 3/8Rated Pressure (PSI) 10,000Rated Flow (GPM) 6Temperature Range-40° to +250° FSpillage (ML) .020(max. per disconnect)Air Inclusion (ML) .070(max. per connect)B-31Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings