Quick Coupling Products - LSR Distribuidor
Quick Coupling Products - LSR Distribuidor Quick Coupling Products - LSR Distribuidor
Diagnostic ProductsTest Port CouplingsPDP SeriesFeatures• Made to connect under pressure up to 6000 psi• Grip-tight knurled sleeves help to make connecting anddisconnecting easy, even while wearing gloves.• Nipples are machined from high tensile steel for strength towithstand 6000 PSI continuous operating pressure.• End connections include pipe, O-ring, 37º Flare and ORFS• Durable Ball Valve Nipple.• Coupler is unvalved to allow gauges and transducers toreturn to zero when disconnected.SpecificationsBody Size 1/8”Description PDP Coupler PDP Nipple AssemblyBody Material (Steel) Carbon High Tensile —Steel SteelRated Pressure (PSI) — 6000 6000Temperature Range (STD Seals) Nitrile-40°F to +250°FConnect Force-Assembly6 Lbs (0 PSI - 6000 PSI)Disconnect Force-Assembly7 Lbs (0 PSI - 6000 PSI)Coupler (connect-under-pressure)Female ThreadACApplicationsThe PDP Series couplings provide easy connection formechanical gauges or specialized diagnostic equipment likeSensoControl.Typically, PDP nipples are permanently mounted in thesystem at threaded test ports, in rigid tubing or in hoseassemblies. PDP couplers are attached to test instruments.Locking balls align the couplers to the mating nipples withoutthreading, so gauges, transducers and other test equipmentcan be snapped into place without difficulty.Parker's PDP Series couplings offer the advantages of PDcouplings, but are designed to connect easily and quicklyunder full system pressure up to 6000 PSI (operating).PDP couplers and nipples push to connect with a constantforce of only six pounds. Then the coupler base is turned toopen the valve and complete the connection. In theconnected position, the coupler base blocks the retractingsleeve to prevent accidental disconnects.Ordering informationCoupler/Nipple MaterialStandard body material is steel.Optional Seals Suffix*No suffix is required when ordering products with thestandard Nitrile seals. When specifying an optional seal,refer to the following chart to determine the appropriatesuffix.**Coupling Series Ethylene Fluoro- Neoprene Perfluoro-Propylene carbon elastomerPD Series W Y ZPDP Series W Y Z*To select proper seal materials, see Fluid Compatibility Chart in Appendicessection, or contact your Parker Quick Coupling Distributor.**N/A = Not Available; STD = Standard (No Suffix Needed)Body Part Thread Dimensions (in.)Size No. Size Overall Wrench Largest Wt. (LB.)(in.) Steel NPTF Length Flats Diameter P/PieceA B C1/8 PDP242 1/4-18 2.15 0.81 0.96 –F DiagnosticBPDP SeriesDUST CAPBody Size Dust Cap(in.) Part No.1/8 PD6-285F-21Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings
Diagnostic ProductsTest Port CouplingsEMA3 SeriesApplicationsFeatures• Knurled sleeve allows simple twist-to-connect operationwithout the use of tools• Rugged design allows connect-under-pressure operationup to 5800 psi• Maximum rated working pressure of 9000 psi exceeds therequirements of most applications• Integral threaded dust cap protects the test point fromdamage and contamination• EMA fittings are machined from solid barstock andprotected with zinc plating and a chromium 6 free finish.• Stainless steel springs for corrosion resistance• Elastomeric interface and valve seals provide leak freeoperation• Compact design and optional high pressure hoseassemblies provide flexibility for tight space requirementsEMA couplings provide easy diagnostic connections forParker SensoControl ® equipment or mechanical gages. EMAtest points are typically permanently plumbed into a fluidsystem at locations where pressure measurements arerequired for maintenance or testing. Integral pressure capprotects the test point from damage and prevents contaminationof the fluid system. Proven twist-to-connect designallows the test points to be connected even when the systemis in operation and the test points are pressurized. EMA’scompact design and optional high pressure hose assembliesallow extra flexibility for the location of system test points.Although designed primarily for diagnostic applications, EMAfittings and hose assemblies are idea for a wide range ofapplications that require compact high pressure connectionsand limited flow rates.SpecificationsBody Size 1/8Rated Pressure (PSI)9000 PSIMax Connect-Under-Pressure (PSI) 5800Rated Flow (GPM) 0.8Body MaterialZinc Plated SteelSeal Material (std.)Nitrile/FluorocarbonTemperature Range (std. seals)-15° to +250° FMale Pipe ThreadDCBAPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/1/8NPT 1/8-27NPT 17 M16X2.0 1.81 0.15EMA3/1/4NPT 1/4-18NPT 17 M16X2.0 1.98 0.16EMA3/1/4NPT71 1/4-18NPT 17 M16X2.0 1.95 0.16Stainless SteelSAE Straight ThreadMetric Straight ThreadDCDCBBAAPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) size Length P/PieceA B C DEMA3/7/16-20UNF-2A* 7/16-20UNF-2A 17 M16X2.0 1.88 0.15EMA3/9/16-18UNF-2A* 9/16-18UNF-2A 19 M16X2.0 1.88 0.17* O-Ring seal on portPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/M8X1OR* M8X1 17 M16X2.0 1.81 0.15EMA3/10X1ED** M10X1 17 M16X2.0 1.85 0.15EMA3/12X1.5ED** M12X1.5 17 M16X2.0 1.94 0.16EMA3/14X1.5ED** M14X1.5 19 M16X2.0 1.94 0.16F DiagnosticBritish Parallel PipeDCBA* O-Ring seal on port** Molded seal on portPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/1/8ED** 1/8 BSPP 19 M16X2.0 1.77 0.15EMA3/1/4ED** 1/4 BSPP 19 M16X2.0 1.94 0.16EMA3/3/8ED** 3/8 BSPP 21 M16X2.0 1.94 0.16** Molded seal on portF-23Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings
- Page 136 and 137: Swivels90°PS SeriesPort 2Hex 1Hex
- Page 138 and 139: Swivels90°PS SeriesMale Pipe - O-R
- Page 140 and 141: Swivels90°PS SeriesFemale Pipe - O
- Page 142 and 143: Swivels90°PS SeriesMale 37° Flare
- Page 144 and 145: Swivels90°PS SeriesFemale SAE Stra
- Page 146 and 147: Swivels90°PS SeriesO-Ring Face Sea
- Page 148 and 149: SwivelsIntroductionS SeriesS Series
- Page 150 and 151: Swivels90°S SeriesMale Pipe - Male
- Page 152 and 153: Swivels90°S SeriesMale 37° Flare
- Page 154 and 155: SwivelsRepair KitsRepair Kits/Seal
- Page 156 and 157: E Check ValvesCheck ValvesIntroduct
- Page 158 and 159: Check ValvesTechnical InformationPr
- Page 160 and 161: Check ValvesDT SeriesSpecifications
- Page 162 and 163: Check ValvesDT SeriesFlow Data110DT
- Page 164 and 165: Check ValvesSpecificationsCV-MFMF M
- Page 166 and 167: QuickCouplingDiagnosticProductsF Di
- Page 168 and 169: Diagnostic ProductsTable of Content
- Page 170 and 171: Diagnostic Products®SensoControl S
- Page 172 and 173: Diagnostic ProductsSensoControl ®
- Page 174 and 175: Diagnostic ProductsSensoControl ®
- Page 176 and 177: Diagnostic ProductsSensoControl ®
- Page 178 and 179: Diagnostic ProductsSensoControl ®
- Page 180 and 181: Diagnostic ProductsSensoControl ®
- Page 182 and 183: Diagnostic ProductsSensoControl ®F
- Page 184 and 185: Diagnostic ProductsTest Port Coupli
- Page 188 and 189: Diagnostic ProductsTest Port Coupli
- Page 190 and 191: Diagnostic ProductsTest Port Coupli
- Page 192 and 193: Diagnostic ProductsOrdering Informa
- Page 194 and 195: AppendicesFluid Compatibility Chart
- Page 196 and 197: AppendicesFluid Compatibility Chart
- Page 198 and 199: AppendicesFluid Compatibility Chart
- Page 200 and 201: AppendicesSafety GuideSAFETY GUIDE
- Page 202 and 203: AppendicesAlpha Numeric IndexNote1.
- Page 204 and 205: AppendicesAlpha Numeric IndexPart N
- Page 206 and 207: AppendicesAlpha Numeric IndexPart N
- Page 208 and 209: AppendicesAlpha Numeric IndexPart N
- Page 210 and 211: AppendicesPart No. Page Part No. Pa
- Page 212 and 213: AppendicesOffer of SaleThe items de
- Page 214: Fluid Connectors GroupSales Offices
Diagnostic <strong>Products</strong>Test Port <strong>Coupling</strong>sEMA3 SeriesApplicationsFeatures• Knurled sleeve allows simple twist-to-connect operationwithout the use of tools• Rugged design allows connect-under-pressure operationup to 5800 psi• Maximum rated working pressure of 9000 psi exceeds therequirements of most applications• Integral threaded dust cap protects the test point fromdamage and contamination• EMA fittings are machined from solid barstock andprotected with zinc plating and a chromium 6 free finish.• Stainless steel springs for corrosion resistance• Elastomeric interface and valve seals provide leak freeoperation• Compact design and optional high pressure hoseassemblies provide flexibility for tight space requirementsEMA couplings provide easy diagnostic connections forParker SensoControl ® equipment or mechanical gages. EMAtest points are typically permanently plumbed into a fluidsystem at locations where pressure measurements arerequired for maintenance or testing. Integral pressure capprotects the test point from damage and prevents contaminationof the fluid system. Proven twist-to-connect designallows the test points to be connected even when the systemis in operation and the test points are pressurized. EMA’scompact design and optional high pressure hose assembliesallow extra flexibility for the location of system test points.Although designed primarily for diagnostic applications, EMAfittings and hose assemblies are idea for a wide range ofapplications that require compact high pressure connectionsand limited flow rates.SpecificationsBody Size 1/8Rated Pressure (PSI)9000 PSIMax Connect-Under-Pressure (PSI) 5800Rated Flow (GPM) 0.8Body MaterialZinc Plated SteelSeal Material (std.)Nitrile/FluorocarbonTemperature Range (std. seals)-15° to +250° FMale Pipe ThreadDCBAPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/1/8NPT 1/8-27NPT 17 M16X2.0 1.81 0.15EMA3/1/4NPT 1/4-18NPT 17 M16X2.0 1.98 0.16EMA3/1/4NPT71 1/4-18NPT 17 M16X2.0 1.95 0.16Stainless SteelSAE Straight ThreadMetric Straight ThreadDCDCBBAAPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) size Length P/PieceA B C DEMA3/7/16-20UNF-2A* 7/16-20UNF-2A 17 M16X2.0 1.88 0.15EMA3/9/16-18UNF-2A* 9/16-18UNF-2A 19 M16X2.0 1.88 0.17* O-Ring seal on portPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/M8X1OR* M8X1 17 M16X2.0 1.81 0.15EMA3/10X1ED** M10X1 17 M16X2.0 1.85 0.15EMA3/12X1.5ED** M12X1.5 17 M16X2.0 1.94 0.16EMA3/14X1.5ED** M14X1.5 19 M16X2.0 1.94 0.16F DiagnosticBritish Parallel PipeDCBA* O-Ring seal on port** Molded seal on portPort Hex InterfacePart Thread Size Thread Overall Wt. (LB.)No. Size (mm) Size Length P/PieceA B C DEMA3/1/8ED** 1/8 BSPP 19 M16X2.0 1.77 0.15EMA3/1/4ED** 1/4 BSPP 19 M16X2.0 1.94 0.16EMA3/3/8ED** 3/8 BSPP 21 M16X2.0 1.94 0.16** Molded seal on portF-23<strong>Quick</strong> <strong>Coupling</strong> Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings