Quick Coupling Products - LSR Distribuidor

Thermoplastic CouplingsCoupling Selection GuideValvingFlush FacePF Series Non-SpillSpectrum TM Series Valved orUnvalvedSpectrum TM Series Valved orUnvalvedSpectrum TM Series Valved orUnvalvedOrdering InformationOptional Seals Suffix*BodySize (in.)Material1/2", 1"& 2” Polypropylene/Stainless and/orKynar/Hastelloy1/8" & 3/8" Acetal316 SSLockingMechanismPawl lockCouplerStylePush-to-ConnectPush-to-ConnectPush-to-ConnectPush-to-ConnectStd. SealMaterialFluorocarbon1/8" & 3/8" PVDF/SS316 SSFinger Lock Fluorocarbon3/8" PVDF/ Finger Lock FluorocarbonPEEK TMTempRange**RatePressure+40° to +140° F 30 to 100 PSIFinger Lock Nitrile 0°F to 180°F 0 to 145 PSI0°F to 250°F 0 to 115 PSI0°F to 250°F 15 to 115 PSIC ThermoplasticsNo suffix is required when ordering products with thestandard Fluorocarbon seals. When specifying an optionalseal, refer to the following chart to determine the appropriatesuffix.**Coupling Series Ethylene Neoprene Perfluoro-PropyleneelastomerPF Series E5 E12 E47*To select proper seal materials, see Fluid Compatibility Chart in Appendicessection, or contact your Parker Quick Coupling Distributor.**N/A = Not Available; STD = Standard (No Suffix Needed)Spectrum Series – are available with these materialsBody MaterialAcetal/SSPVDF/SSPVDF/PEEKSeal MaterialNitrileFluorocarbonFluorocarbonC-3Quick Coupling Division8145 Lewis Road • Minneapolis, MN 55427www.parker.com/quickcouplings