DISTRIBUTION AMPLIFIERS - Triax

DISTRIBUTION AMPLIFIERSReliable, Flexible & Cost Efficientfor various installations

h e f s e r i e sHEF amplifiers – Reliable, flexible and cost-efficient for big multi-dwelling houses• ROB – “Return Path on Board” without any external modules or pads meansmore flexibility and lower efforts in installation and logistics• Jumper matrixes to switch the fix elements for attenuation / equalization and toselect return path or VHF I operation increase the reliability and reduce the logistics• High gain at the return path meets also special requirements in multimedia networks• Excellent electrical performance for low cost and low power consumption• For SMATV HEF 845 without return path and with spin potentiometers insteadof jumper matrixesTYPEPART NO.HEF 845323068HEF 845 C323071HEF 845 CL323074Frequency rangeselected: VHF I “on”, RP “off”selected: VHF I “off”, RP “on”MHzMHz40-862 40-8625-65/85-86240-8625-65/85-862Gain forwardGain @ 862 MHzAttenuator at input (2 dB steps)Attenuator elements interstagedBdBdB360-20 (pot)0/6360-160/6360-160/6Gain return pathGain @ 60 MHzAttenuator elements at inputAttenuator elements at outputdBdBdB-1.5/270/2/4/6/500/3/6/9-1.5/270/2/4/6/500/3/6/9Amplitude response forward40...862 MHz (VHF I: on)Line equalizer at inputLine equalizer (2...3 dB steps)Slope interstagedBdBdBdB0-18 (pot)0/71.50-160/71.50-160/7Amplitude response return path 5...60 MHzEqualizer element interstagedBdB1.50/3/61.50/3/6Random noiseForward (VHF I „on“)Return path (VHF I „off“)dBdB5.0 5.56.05.56.0Return loss @ 40 MHz, -1.5 dB/octave dB > 14 > 14 > 14Output level forwardIMR2/ IMR3 ≥ 60 dBCSO ≥ 60 dB, 42 ch. Slope 0/7 dBCTB ≥ 60 dB, 42 ch. Slope 0/7 dBdBµVdBµVdBµV114/123109/111108/110114/123109/111108/110114/123109/108111/110Output level return pathIMR2/ IMR3 ≥ 60 dB dBµV 104/115 104/115RF connectors (75 Ohm)InputOutputTest point input: bi-directionalTest point output: directionaldBdBF-femaleF-female-20 (bi-dir)F-femaleF-female-20-20F-femaleF-female-20-20Operating conditionsMax. RF level (EMC) dBµV 113 113 113Supply voltage V 180-253 180-253 25-65Power consumption W 6.5 9 9Operating temperature °C -25...+55 -25...+55 -25...+55Protection class II, Protective II, Protective II, ProtectiveHousing protection degree IP 65 65 65Dimensions W x H x D mm 190 x 110 x 80 190 x 110 x 80 190 x 110 x 80Weight kg 2 2 2Packing unit 1 pcs. carton box 1 pcs. carton box 1 pcs. carton boxReference standardsProduct standards/safety/EMCRoHS 2002/95/EG compliantEN 50083-3 - Class 2 / EN 50083-1; EN 60065 / EN 50083-2Yes

i fe s e r i e sReliable, flexible and cost-efficient for small and middle sized buildings• ROB – “Return Path on Board” without any external modules or pads means moreflexibility and lower efforts in installation and logistics• High gain at the return path meets also special requirements in multimedia networks• C-Type: with jumper matrixes to switch the fix elements for attenuation / equalization andto select return path or VHF I operation increase the reliability and reduce the logistics• Excellent electrical performance for low cost and low power consumptionTYPEPART NO.IFE 820 A323010IFE 830 A323016IFE 834 C323037Frequency rangeselected: VHF I “on”, RP “off”selected: VHF I “off”, RP “on”MHzMHz 5-65/85-862 5-65/85-86240-8625-65/87-862Gain forwardGain @ 862 MHzAttenuator at input (2 dB steps)Attenuator elements interstageGain return pathGain @ 60 MHzAttenuator elements at inputAttenuator elements at outputAmplitude response forward40...862 MHz (VHF I: on)Fix slopeLine equalizer at inputLine equalizer (2-3 dB steps)Slope interstageAmplitude response return path 5-60 MHzEqualizer element interstageRandom noiseForward (VHF I „on“)Return path (VHF I „off“)dBdBdBdBdBdBdBdBdBdBdBdBdBdBdB210-20300-20340-16-1.5/18 -1.5/25 260/3/6/9/500/101.5+ 1 dB0-161.5+ 1 dB0-181.5+ 1 dB0-160/71.5 1.5 1.55.56.05.56.06.06.0Return loss @ 40 MHz, -1.5 dB/octave dB > 14 > 14 > 14Output level forwardIMR2/ IMR3 ≥ 60 dBCSO/CTB ≥ 60 dB. 42 ch, flatCSO/CTB ≥ 60 dB, 42 ch. Slope 0/7 dBdBµVdBµVdBµV100/11397/10099/101105/115101/100103/102112/118104/103106/105Output level return pathIMR2/ IMR3 ≥ 60 dB dBµV 102/113 102/113 102/113RF connectors (75 Ohm)InputOutputTest point input: bi-directionalTest point output: directionaldBdBF-femaleF-femaleF-femaleF-femaleF-femaleF-femaleOperating conditionsMax. RF level (EMC) dBµV 110 110 110Supply voltage V 230 / ±10% 230 / ±10% 230 / ±10%Power consumption W 4.5 6 7.5Operating temperature °C -25...+55 -25...+55 -25...+55Protection class II II IIDegree of protection IP 20 20 20Dimensions W x H x D mm 150 x 80 x 50 150 x 80 x 50 150 x 80 x 50Weight kg 0.64 0.64 0.68Packing unit 1 pcs. carton box 1 pcs. carton box 1 pcs. carton boxReference standardsProduct standards/safety/EMCRoHS 2002/95/EG compliantEN 50083-3 - Class 2 / EN 50083-1; EN 60065 / EN 50083-2Yes

i fe s e r i e sIFE amplifiers – for SMATV applications• Excellent electrical performance for low cost and low power consumption• Simple initiation because of reduced controller elements• Q-types: apartment amplifiers with 4 outputs for simple home installationsTYPEPART NO.IFE 20323022IFE 30323025IFE 16 Q323031Frequency rangeBasic unit without RP modulesselected: VHF I “on”, RP “off”selected: VHF I “off”, RP “on”MHzMHzMHzMHz40-862(1000 MHz)40-862(1000 MHz)40-862(1000 MHz)Gain forwardGain @ 862 MHz out 1Gain @ 862 MHz out 2-3-4Attenuator at inputGain return pathGain @ 60 MHzAttenuator elements at inputAttenuator elements at outputAmplitude response forward40-862 MHz (VHF I: on)Fix slopeLine equalizer at inputLine equalizer (2-3 dB steps)Slope interstageAmplitude response return path 5-60 MHzEqualizer element interstageRandom noiseNoise figureForward (VHF I „on“)dBdBdBdBdBdBdBdBdBdBdBdBdBdBdB210-201.5+ 1290-201.5+ 116170-201.5+ 14.5 4.5 4.5Return loss @ 40 MHz, -1.5 dB/octave dB > 14 > 14 > 14Output level forwardIMR2/ IMR3 ≥ 60 dBCSO/CTB ≥ 60 dB, 42 ch. flatOutput level return pathIMR2/ IMR3 ≥ 60 dBRF connectors (75 Ohm)InputOutputTest point input: bi-directionalTest point output: directionaldBµVdBµVdBµVdBdB100/11395/98F-femaleF-female105/113100/100F-femaleF-female92/10390/90F-femaleF-femaleOperating conditionsMax. RF level (EMC) dBµV 105 105 105Supply voltage V 230 / ±10% 230 / ±10% 230 / ±10%Power consumption W 3 5 5Operating temperature °C -25...+55 -25...+55 -25...+55Protection class II II IIDegree of protection IP 20 20 20Dimensions W x H x D mm 150 x 80 x 50 150 x 80 x 50 150 x 80 x 50Weight kg 0.65 0.65 0.65Packing unit 1 pcs. carton box 1 pcs. carton box 1 pcs. carton boxReference standardsProduct standards/safety/EMCRoHS 2002/95/EG compliantEN 50083-3 - Class 2 / EN 50083-1; EN 60065 / EN 50083-2Yes

h fa s e r i e s - m a i n s p o w e r e dPowerful, reliable and easy to install HFA distribution amplifiersWith the HFA series of broadband distribution amplifiers,both the installer and the network operator obtain allthe benefits of a quality product: Reliability and a longlifetime, quick installation, effective shielding and theoption to use the network for all conceivable interactiveservices.HFA 60x amplifierTYPEPART NO.HFA 602324602HFA 603324603HFA 604324604Forward pathFrequency rangeMHz 47/73/87-862 47/73/87-862 47/73/87-862(depending on module)Gain adjustable dB 22 30 40Attenuation dB 0 - 20 0 - 20 0 - 20Noise figure dB < 8.5 (typical 7.5) < 7.5 (typical 6.5) < 7.0 (typical 6.0)Linearity dB ± 1.0 ± 1.0 ± 1.0Equalization dB 0 - 18 0 - 18 0 - 18Output level60 dB 3 order (DIN 45004B)dBµV60 dB 2 order (DIN 45004A1)60 dB CTB 1)dBµV60 dB CSO 1) dBµVdBµV118112101101Return loss input (-1.5 dB/octave) dB >14 @ 40 MHz(min. 10)Return loss output (-1.5 dB/octave) dB >14 @ 40 MHz(min. 10)Return pathFrequency range(depending on module)MHz 5-30, 5-55or 5-65Gain (adjustable) dB passive -1.0active 17.0118112101101>14 @ 40 MHz(min. 10)>14 @ 40 MHz(min. 10)5-30, 5-55or 5-65passive -1.0active 17.0118112101101>14 @ 40 MHz(min. 10)>14 @ 40 MHz(min. 10)5-30, 5-55or 5-65passive -1.0active 17.0Linearity dB ± 1.0 ± 1.0 ± 1.0Return loss input (-1.5 dB/octave) dB > 14 @ 5 MHzto 65 MHzReturn loss output (-1.5 dB/octave) dB > 14 @ 5 MHzto 65 MHz> 14 @ 5 MHzto 65 MHz> 14 @ 5 MHzto 65 MHz> 14 @ 5 MHzto 65 MHz> 14 @ 5 MHzto 65 MHzGeneralPower supply type Mains powered Mains powered Mains poweredPower supply V/AC 230 ± 10% 230 ± 10% 230 ± 10%Power consumption W 7.5 7.5 7.5Shielding efficiency VHF dB 100 100 100Shielding efficiency UHF dB 90 90 90Housing - protection class IP65 IP65 IP65Connectors F-connectors F-connectors F-connectorsCertificationImpedance Ohm 75 75 75Operation temperature range °C 0...+55 0...+55 0...+55Weight kg 1.325 1.325 1.325Dimensions (h x d x w) mm 145 x 70 x 170 145 x 70 x 170 145 x 70 x 1701) DIN/EN 50083 Part 3 CTBA (Composite triple beat ratio) @ 60 dB IMD, CENELEC-raster 42 channels

ac c e s s o r i e s f o r h fa amplifiers5 MHz 30 47 55 65 73 87 862 MHzNo diplex filterForwardMD 3047/ TReturn pathForwardMD 5573/ TReturn pathForwardMD 6587/ TReturn pathForwardMD diplex modulesMD DIPLEX FILTER MODULESTYPEPART NO.MD 3047324681MD 3047T324682MD 6587324683MD 6587T324684Frequency range (return path) MHz 5 - 30 5 - 30 5 - 65 5 - 65Frequency range (forward path) MHz 47 - 862 47 - 862 87 - 862 87 - 862Test point dB - - 20 - - 20Packing size pcs. 2 2 2 2MA 617 RETURN-PATH AMPLIFIERLINE POWER SUPPLYTYPEPART NO.MA 617324617TYPEPART NO.TRP416014Frequency range MHz 5 - 65Gain MHz 17Attenuation dB 20Packing size pcs. 1Power supply input V/AC 230 ± 10%Power supply output V/AC 48Max. current A 1.25Dimensions (height x diameter) mm 60 x 100POWER INSERTER WITH F-CONADAPTOR FOR HXX AMPLIFIERSTYPEPART NO.TPI - 01347001TYPEPART NO.PG11 - FF153580Frequency range MHz 5 - 2400Through loss 5-862 MHz dB ≥ 0.51000-2150 MHz dB ≥ 1.5Max. current A 2.5Power V/AC 65Dimension mm HEX 20 x 72.5Weight kg 0.046Triax UK Limited, Abergorki Ind. Est,RCT, South Wales, CF42 6DLTel: 0845 601 0578 Email: sales@triax.co.ukwww.triax.co.uk*Triax reserves the right to change the specifications without prior notification