90865_RockCore - MSDS.pdf - Danville Materials

D A N V I L L ECORE BUILD-UP MATERIALTMRock CoreRock Core is a resin composite which is ideal for core build-ups and for cementing posts.Dual-cure chemistry allows Rock Core to be rapidly set with a light or to self-cure in 5 min.Rock Core cuts like dentin and white shade is easy to differentiate from tooth structure.• Cuts like dentin• Dual cure• White shade is easily differentiated from dentin• A2 shade blends with tooth structure• Automix cartridge (white) or automix syringe (A2)• RadiopaqueInstructions for use:1. Apply and cure resin-bonding agent compatible with self-cure and/or dual-cure composites.2. Place a matrix band or crown form.3. Snap the plastic ‘needle’ into the automix tip and express directly, filling from the bottom up toavoid bubbles. With crown forms, fill and place. Hold until fully set.Working time: 1 ½ min4. Rock Core may be manipulated using a composite instrument.Light set: 40 sec, 4mm max depthSelf-cure: 5 min @ 37°C/98°F5. Use diamond or carbide burs for final crown preparation.6. Use separating gel (such as LIQUID LENS) if a provisional is made on the prepared tooth.D A N V I L L EM A T E R I A L S3420 fostoria way ste. A-200 San Ramon, California 94583 USAPhone 800/827-7940 Fax 925/973-076490865 REV DNotes:• Avoid eugenol as it will inhibit set.• Use only in dry field. Water and oily air will inhibit set and bond.• Avoid contact with skin and eyes. If accidental contact occurs, wash with water and contacta physician if necessary.• Storage: Refrigerate. Do not freeze. Use at room temperature.• Use a dispensing gun to avoid hand strain.Composition:• Barium glass 69%, silica 3% in a Bis-GMA based resin. Total filler volume: 49 %• Diametral tensile strength 60 Mpa. Water sorption max. 25 µg/mm3 Compressive strength300 MPaD A N V I L L ECORE BUILD-UP MATERIALTMRock CoreRock Core is a resin composite which is ideal for core build-ups and for cementing posts.Dual-cure chemistry allows Rock Core to be rapidly set with a light or to self-cure in 5 min.Rock Core cuts like dentin and white shade is easy to differentiate from tooth structure.• Cuts like dentin• Dual cure• White shade is easily differentiated from dentin• A2 shade blends with tooth structure• Automix cartridge (white) or automix syringe (A2)• RadiopaqueInstructions for use:1. Apply and cure resin-bonding agent compatible with self-cure and/or dual-cure composites.2. Place a matrix band or crown form.3. Snap the plastic ‘needle’ into the automix tip and express directly, filling from the bottom up toavoid bubbles. With crown forms, fill and place. Hold until fully set.Working time: 1 ½ min4. Rock Core may be manipulated using a composite instrument.Light set: 40 sec, 4mm max depthSelf-cure: 5 min @ 37°C/98°F5. Use diamond or carbide burs for final crown preparation.6. Use separating gel (such as LIQUID LENS) if a provisional is made on the prepared tooth.D A N V I L L EM A T E R I A L S3420 fostoria way ste. A-200 San Ramon, California 94583 USAPhone 800/827-7940 Fax 925/973-076490865 REV DNotes:• Avoid eugenol as it will inhibit set.• Use only in dry field. Water and oily air will inhibit set and bond.• Avoid contact with skin and eyes. If accidental contact occurs, wash with water and contacta physician if necessary.• Storage: Refrigerate. Do not freeze. Use at room temperature.• Use a dispensing gun to avoid hand strain.Composition:• Barium glass 69%, silica 3% in a Bis-GMA based resin. Total filler volume: 49 %• Diametral tensile strength 60 Mpa. Water sorption max. 25 µg/mm3 Compressive strength300 MPa

Material Safety Data SheetRevision Date 12.09.2010Section 1Product and Company IdentificationProduct Name: Rock CoreCompany: Danville Materials3420 Fostoria Way Ste A-200San Ramon, CA 94583Phone: 800.827.7940925.973.0710Fax: 925.973.0764Section iiComposition/Information on IngredientsCommon Chemical Name/GenericName: Preparation of acrylic resin, glasspowder and silica. Contains urethane dimethacrylate,aliphatic dimethacrylate, aromaticdimethacrylate.Section iiiHazards IdentificationNone, if handled according to directions.Irritating to eyes, respiratory system andskin.Section ivFirst-Aid MeasuresIn Case of Inhalation: In case of prolongedexposure take patient to open air.In Case of Skin Contact: Wash withsoap and water.In Case of Eye Contact: Rinse with plentyof water, consult a physician.In Case of Ingestion: Immediately seekmedical advice.Section vFire-Fighting MeasuresExtinguishing Media: Powder, sand, foam,carbon dioxide, water spray.Not Suitable Extinguishing Media: Directjet of water.Section viAccidental Release MeasuresPersonal Precautions: Use only in wellventilated areas.Environmental Precautions: Do notempty into drains.Methods for Cleaning Up: Take up mechanically.Section viiHandling and StorageHandling:Technical Measures: Keep containertightly closed.Safe Handling Advice: Wear suitablegloves. Avoid contact with eyes.Storage:Technical Measures: Keep container in awell ventilated place.Storage Conditions: Keep containertightly closed. Keep in a dark, cool place.Section ViiiExposure Controls/Personal ProtectionEngineering Measures: Use only in wellventilated areas.Personal Protective Equipment:Respiratory Protection: Do not breathevapour.Hand and Skin Protection: Rubbergloves.Eye Protection: Goggles.Hygiene Measures: When using do noteat or drink.Section ixPhysical and Chemical PropertiesAppearance: Slightly yellowish pasteOdor: Esterlike, weakpH-Value: Not applicableChanges in physical State: n/aDecomposition Temperature: >ca.200 0 CFlashpoint: >150 0 CExposion Properties: not establishedVapour Pressure: 1Density: ca. 1.8 g/cm 3Solubility in Water: ca. 1 g/1/20 0 CSection xStability and ReactivityThermal Decomposition: at ca. 200 0 CNo decomposition, if handled according todirections.Hazardous Reactions: None, if handledand stored according to directions.Conditions to Avoid: Heat, light.Materials to Avoid: Free radicals, reducingagents, heavy metal ions.Hazardous decomposition Products:In case of fire acrid acrylic fumes.Cures on exposure to visible or UV light.Section xiToxicological InformationAcute Oral Toxicity: LD 50(Rate)>5000mg/kgIrritation of Skin: Irritating on prolongedexposure.Irritation of Eye: Irritating on prolongedexposure.Specific Effects: Allergic reactions tomethacrylates are possible.Section xiiEcological InformationDo not discharge into drains or the environment.Persistence and Degradibility: No dataavailable for the preparation.Section xiiiDisposal ConsiderationsWaste from Residues: Use proper landfilldisposal or incineration in accordancewith local, state and federal regulations.Section xivTransport InformationAdditional Information: Not dangerouscargo.Section XVRegulatory InformationLabelling According InternationalRegulations: Xi, Irritant. Contains Methacrylicester.Symbols of Danger: St Andrew’s crossR-Phrases: 36/37/38Irritation to eyes, respiratory system and skin.S-Phrases: 26-28In case of contact with eyes rinse immediatelywith plenty of water and seek medicaladvice. After contact with skin wash immediatelywith plenty of water and soap.Section xviOther InformationNone.Material Safety Data SheetRevision Date 12.09.2010Section 1Product and Company IdentificationProduct Name: Rock CoreCompany: Danville Materials3420 Fostoria Way Ste A-200San Ramon, CA 94583Phone: 800.827.7940925.973.0710Fax: 925.973.0764Section iiComposition/Information on IngredientsCommon Chemical Name/GenericName: Preparation of acrylic resin, glasspowder and silica. Contains urethane dimethacrylate,aliphatic dimethacrylate, aromaticdimethacrylate.Section iiiHazards IdentificationNone, if handled according to directions.Irritating to eyes, respiratory system andskin.Section ivFirst-Aid MeasuresIn Case of Inhalation: In case of prolongedexposure take patient to open air.In Case of Skin Contact: Wash with soapand water.In Case of Eye Contact: Rinse with plentyof water, consult a physician.In Case of Ingestion: Immediately seekmedical advice.Section vFire-Fighting MeasuresExtinguishing Media: Powder, sand, foam,carbon dioxide, water spray.Not Suitable Extinguishing Media: Directjet of water.Section viAccidental Release MeasuresPersonal Precautions: Use only in wellventilated areas.Environmental Precautions: Do notempty into drains.Methods for Cleaning Up: Take up mechanically.Section viiHandling and StorageHandling:Technical Measures: Keep containertightly closed.Safe Handling Advice: Wear suitablegloves. Avoid contact with eyes.Storage:Technical Measures: Keep container in awell ventilated place.Storage Conditions: Keep containertightly closed. Keep in a dark, cool place.Section ViiiExposure Controls/Personal ProtectionEngineering Measures: Use only in wellventilated areas.Personal Protective Equipment:Respiratory Protection: Do not breathevapour.Hand and Skin Protection: Rubbergloves.Eye Protection: Goggles.Hygiene Measures: When using do noteat or drink.Section ixPhysical and Chemical PropertiesAppearance: Slightly yellowish pasteOdor: Esterlike, weakpH-Value: Not applicableChanges in physical State: n/aDecomposition Temperature: >ca.200 0 CFlashpoint: >150 0 CExposion Properties: not establishedVapour Pressure: 1Density: ca. 1.8 g/cm 3Solubility in Water: ca. 1 g/1/20 0 CSection xStability and ReactivityThermal Decomposition: at ca. 200 0 CNo decomposition, if handled according todirections.Hazardous Reactions: None, if handledand stored according to directions.Conditions to Avoid: Heat, light.Materials to Avoid: Free radicals, reducingagents, heavy metal ions.Hazardous decomposition Products:In case of fire acrid acrylic fumes.Cures on exposure to visible or UV light.Section xiToxicological InformationAcute Oral Toxicity: LD 50(Rate)>5000mg/kgIrritation of Skin: Irritating on prolongedexposure.Irritation of Eye: Irritating on prolongedexposure.Specific Effects: Allergic reactions tomethacrylates are possible.Section xiiEcological InformationDo not discharge into drains or the environment.Persistence and Degradibility: No dataavailable for the preparation.Section xiiiDisposal ConsiderationsWaste from Residues: Use proper landfilldisposal or incineration in accordancewith local, state and federal regulations.Section xivTransport InformationAdditional Information: Not dangerouscargo.Section XVRegulatory InformationLabelling According InternationalRegulations: Xi, Irritant. Contains Methacrylicester.Symbols of Danger: St Andrew’s crossR-Phrases: 36/37/38Irritation to eyes, respiratory system and skin.S-Phrases: 26-28In case of contact with eyes rinse immediatelywith plenty of water and seek medicaladvice. After contact with skin wash immediatelywith plenty of water and soap.Section xviOther InformationNone.