PowerCool HB800 - MTU Detroit Diesel Australia

PRODUCT DATA SHEETPower Cool HB800 Premix Coolant is a superior, fully formulated Hybridtechnology engine coolant. This Hybrid technology coolant has the advantage ofbeing more robust than conventional engine coolants. This low silicate, phosphateand amine free product is recommended for use in construction and industrial,mining, power generation, rail, truck, bus and agricultural applications. It providesexceptional high temperature protection for aluminium and cast iron surfaces.Power Cool HB800 Premix Coolant, is mixed at 50% concentration. It does notrequire an initial charge of supplemental coolant additives (SCAs) upon initial fill asthe product is specially formulated to protect heavy duty diesel wet sleeve liners.SCA addition is application dependant and should only be added as required bythe OEM. This coolant is compatible with coolant filters and coolant extenders.Power Cool HB800 Premix Coolant offers the following advantages:• Extended life – With proper cooling system maintenance Power Cool HB800 Premix Coolant has anexpected service life of up to 4 years, or 1,000,000km or 12,000 hours, whichever occurs first• No initial SCA requirement at initial fill• Product is compatible with standard SCAs and coolant extenders• Low silicate• Phosphate and amine free• Universal use, meets or exceeds standard industry requirements for light and heavy duty dieselapplications• Power Cool HB800 Premix Coolant is compatible with both conventional and OAT coolants. Foroptimum performance (extended service life) it is best practice to flush the old coolant and replacewith Power Cool HB800 Premix Coolant at your next service interval

PRODUCT DATA SHEETPower Cool HB800 Premix Coolant meets or exceeds the performance requirements of thefollowing engine coolant specifications:• ASTM D-3306, D-4985,D-6210• Caterpillar EC1• Cummins 14603• Detroit Diesel 7SE 298• DaimlerChrysler MS 7170,MS 9769• Ford ESE-M97B44A, ESE-M97B18-C, Ford WSS-M97B51-A1• Freightliner 48-2288D• GM 1825M, 1899M,GM Heavy Truck• Hyundai• JIS K2234• Kenworth RO26-170-97• Landrover• MACK Trucks• DAF• Iveco• John Deere• MAN 324• Mercedes Benz DBL 325• MTU MTL 5048• New Holland WSN-M97B18-D• PACCAR• Peterbilt 8502.002• Perkins• Saab-Scania 6901• SAE J1034, J1941• TMC RP 329• Suitable for Toyota• White Star• US Federal A-A-870-A• JCB• Scania TB1451Power Cool HB800 Premix Coolant Performance TestingCoupon ASTM D-1384Glassware CorrosionASTM D-2570Simulated ServiceType 1 Test Results 1 Max. Spec. 1 Test Results 1,2 Max. Spec. 1Copper 1.7 10 1.1 20Solder 3 4.3 30 21.6 60Brass 0.6 10 1.6 20Steel 0.1 10 +0.8 20Cast Iron +0.8 10 +1.2 20Aluminum +0.3 30 +2.5 601. Wt. /loss coupon in mg. 2. Copper/brass radiator results. 3. Regular 70/30 lead on copper/brasscoupons.Power Cool HB800 Premix Coolant Performance TestingASTM Test Procedure Test Results SpecificationD4340 Heat Rejecting Aluminium Corrosion 0.16 mg/cm 2 /week 1.0 maximumD2809 Aluminium Water Pump Cavitation-Erosion Corrosion (rating from 1 to 10)Shelf-life stability: minimum 2 years from date of manufacture10 8 minimum

PRODUCT DATA SHEETPower Cool HB800 Coolant Premix Physical & Chemical PropertiesTest Performance Test MethodpH 7.6 - 8.5 ASTM D-1287Reserve Alkalinity (ml) 3 min. ASTM D-1121Specific Gravity (15.6ºC/60ºF) 1.065 – 1.075 ASTM D-1122Freeze Point -37ºC/-34ºF ASTM D-1177Foam Volume (ml) 50 max. ASTM D-1881Break Time (sec) 5 max. ASTM D-1881Flash Point 116ºC/240ºF ASTM D-92Fire Point120ºC/248ºFAsh Content (wt. %) 5 max. ASTM D-1119OdourColourTotal Glycols (Weight %)Inhibitors and dye (Weight %)CharacteristicLuminescent Yellow50.0 min.2.5 max.Chloride ppm 25 max. ASTM D-3634Silicon (ppm) 93 max. ICPThe performance and physical property data described for this product is typical results not sale specifications except wheremaximum or minimum is indicated.Power Cool HB800 Premix Coolant provides exceptional value as an aluminium and cast iron compatible,long life engine coolant. For coolant top up use Power Cool HB800 Premix coolant,DO NOT add just water as this will dilute the corrosion inhibitor package.For more information on Power Cool for your application please contactMTU Detroit Diesel Australia on 1300 MTU Detroit (1300 688 338)Notice: Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsiblefor determining whether products and the information in this document is appropriate for their use and for ensuring that their workplace and disposalpractices are in compliance with applicable laws and other governmental enactments. Power Cool’s warranty is limited to the claims of product meetingstated specifications. It is the responsibility of the end user to determine product suitability as recommended in the Owner’s Manual and to follow enginemanufacturer’s instructions.