PERFORMANCE

LEGRAND CABLING SYSTEM 2PERFORMANCEFROM TECHNICAL ROOMTO WORKSTATION

LEGRANDCABLING SYSTEM 2LCS 2Solutions from technicalroom to workstationSee pages 02 to 13LCS 2 copperSee pages 14 to 21LCS 2 fibre opticSee pages 22 to 27LCS 2 enclosuresSee pages 28 to 37LCS 2 workstationSee pages 38 to 47LCS 2 servicesSee pages 48 to 51Catalogue referencesSee pages 52 to 103

LCS 2from technical roomto workstationLCS 2LCS 2 Cabling system productsComplete systems with a 20-year guarantee.The new LCS 2 cat. 6A (up to 500 MHz),cat. 6 (up to 250 MHz) and cat. 5e (up to 100 MHz)systems have been designed as coherent entitiesto optimise their performance.The systems are suitable for optical fibre cables aswell as copper cables.See pages 14 to 47Legrand SynergiesThe new LCS 2 systems integrate perfectlyin the various other Legrand solutions:DLP trunking system, cabling accessories,cable management, etc.See pages 40 to 41Towards network convergence.The IP convergence products (IP telephony,IP remote monitoring, IP access control)can also be a part of the LCS 2 systems.03

1LCS 2APPLICATIONEXAMPLE1 2 3OFFICEArea distribution boxRJ 45 socketAccess control04

2LCS 2344Patch panel05

21LCS 21APPLICATIONEXAMPLEMALLCENTER Switch Mosaic Cablofil206

LCS 23434Cabling unitFibre optic socket07

3LCS 2APPLICATIONEXAMPLE1 2CAMPUSAVS socketDLP trunking system08

12LCS 243 4Wi-Fi access pointRJ 45 with controlledaccess09

24LCS 2APPLICATIONEXAMPLE1 2HOTELRJ 45 sockets 45°Retractable RJ 45 socket10

1LCS 2334Patch cord19” wall-mountingcabinet11

System guaranteedperformance of theLegrand systemsMeasurements of LCS 2 components andlinks, validated by independent laboratories3 P Third Party Testing and ETL, havehighlighted its triple performance.Performance of the transmission in cat. 6A,performance of the installation, performanceof the maintenance.Performance of the transmission1in cat. 6AFor long distance, 10 Giga guarantees only slightsignal loss for 100 m. For short distance, 10 Gigaguarantees a good echo resistance for 15 m.Performance2of the installationThe values measured widely exceed therequirements of the ISO 11801 standard, Edition 2,amendment 2, thus providing a safetymargin to conform to the most rigorousconstraints of the installation.Performance3of maintenanceBeing committed to deliver a durable LCS 2system, Legrand gives a 20-year guaranteeon its performance.Note: all LCS 2 products are RoHS compliance.Category 6AAttenuation (dB)Loss of signalReturn Loss (dB)Echo resistanceNetwork protocol supportedLCS 2ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2LCS 2ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2Next (dB) Resistance to LCS 2interference between pairs (1) ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2ACR-N (dB)(Alien Crosstalk Ratio)Actual power suppliedCOMPONENTMEASUREMENTSTPLINK MEASUREMENT(CHANNEL)Class E A / cat. 6 A500 MHz 250 MHz 500 MHz 250 MHz10 Giga 1 Giga 10 Giga 1 Giga0.130.45 min.0.45 max.17.0514 min.14 min.37.4637 min.34 min.0.060.32 max.0.32 max.26.5920 min.20 min.56.9346 min.46 min.35.442.1 max.49.3 max.16.48 min.6 min.38.129.2 min.26.1 min.24.128.9 max.33.9 max.22.110 min.8 min.5435.3 min.33.1 min.LCS 2 37.33 56.87 2.7 29.9(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 212

LCS 201020ISO 11801 STANDARD Edition 2Return Loss (dB)3040506070801.23.64.57.8100 200 300 400 500Frequency (MHz)Measurement of the Return Losson a class E A linkOn each pair, the performances of LCS 2are significantly higher than the valuesrequired by the ISO 11801 Standard,Edition 2, amendment 2.Category 6Attenuation (dB)Loss of signalReturn Loss (dB)Echo resistanceNetwork protocol supportedLCS 2ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2LCS 2ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2Next (dB) Resistance toLCS 2interference between pairs (1) ISO 11801 Standard, Edition 2, Amendment 2 (2)TIA/EIA-568-C.2ACR-N (dB)(Alien Crosstalk Ratio)Actual power suppliedCOMPONENT MEASUREMENTLINKMEASUREMENT(CHANNEL)STP FTP UTP Class E / cat. 6250 MHz 250 MHz 250 MHz 250 MHz1 Giga 1 Giga 1 Giga 1 Giga0.090.32 max.0.32 max.29.816 min.16 min.51.346 min.46 min.0.090.32 max.0.32 max.29.816 min.16 min.51.346 min.46 min.0.090.32 max.0.32 max.29.816 min.16 min.51.346 min.46 min.25.730.7 max.35.9 max.38.810 min.8 min.53.935.3 min.33.1 min.LCS 2 51.21 51.21 51.21 28.2(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 213

LCS 2 COPPERA completesystem upto 10 Gbits/sConnectorsSee page 16 to 17LCS 2 COPPERPatch panelsSee page 18 to 19Patch cords and cablesSee page 20 to 2115

New LCS 2connectorPerformance ofthe installation12The new LCS 2 RJ 45 connector isthe core element contributing to theperformance of the LCS 2 system.You can obtain a perfect connection within a fewseconds guaranteeing an optimum performanceof the link from the patch panel to the RJ 45socket (see page 12).LCS 2 COPPERInsert the cablein the rear partVisibility of the marking asper the EIA/TIA code.Takes all cables currentlyavailable on the market:U/UTP, F/UTP and SF/UTP.3Separate and insertthe strandsIntuitively maintain 13 mm,no need to measure.4Add the upper partof the connectorThe tamperproof insert givesease of movement.Turn to guaranteethe connectionSimply turn to flattenthe strands simultaneously. Cutthem, and the connector is ready!Performanceall categoriesThanks to the connectorsLCS 2 cat. 6A shielded 360° 500 MHz - 10 Gbits/s.LCS 2 cat. 6 shielded 360° 250 MHz - 1 Gbits/s.LCS 2 cat. 6 shielded and unshielded250 MHz - 1 Gbits/s.LCS 2 cat. 5e shielded and unshielded.2 ergonomicoptions- Workstation.- Patch panels.17

LCS 2 Patch panelsPerformance ofmaintenanceThe design of the new LCS 2 patchpanels optimises the mounting andmaintenance.Maintaining the cables with cable guides,blocks of 6 RJ 45 connectors, clippingand unclipping each connector from thefront panel.LCS 2 COPPERBetter fixing by clampCable maintained in its cable guide.Room for maintenanceSimple unclippingof LCS 2 connectors.Panels provided withquick-fixing systemUniversal mountingany rack or cabinets.The new LCS 2panels can also befitted with:Telephone block FC type video broadcast block LC fibre optic cassette19

Legrand cablesand cordscoherence andperformanceTo ensure total coherence of its LCS 2cat. 6A, cat. 6 and cat. 5e systems,Legrand offers a range of 4 twisted pair cablesin the four types: U/UTP, F/UTP, S/FTP, SF/UTP.High-quality manufacturingManufactured to high quality standards,with thicker insulation to reduce the effectsof crosstalk, and reduction of the twist pitch of the pairs:the quality of Legrand cables is suitable for the LCS 2category 6A, category 6 and category 5e systems,ensuring high performance from the patch panel rightthrough to the RJ 45 socket. What's more, Legrand offersits cables in 2 versions with sheaths suitable for differentenvironments: LSZH and PVC. The 3P laboratoryhas certified all the Legrand cables to be compliantwith the ISO IS 11 801, EN 50173-1 standardsand TIA/EIA-568-C.2.See catalogue pagesLegrand cat. 6 F/UTP cable.Legrand cat. 6 SF/UTP cable.Legrand cat. 6A F/UTP cable.20

CAT. 7 S/FTPCABLE100 OHMSCAT. 6A F/UTPCABLE100 OHMSCAT. 6 U/UTPCABLE100 OHMSCAT. 6 F/UTPCABLE100 OHMSCAT. 6 SF/UTPCABLE100 OHMSCAT. 5e U/UTPCABLE100 OHMSCAT. 5e F/UTPCABLE100 OHMSSHEATHLSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.5 mm - Colour yellow RAL 1018LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 7.8 mm - Colour yellow RAL 1018PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 6.4 mm - Colour blue RAL 5015PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordance withIEC 60332-1 & NFC 32070 2.1 Synthetic waterrepellent tape Ø 7 mm - Colour blue RAL 5015PVC or LSZH in accordance with NFC 32062 withflame retardant effect in accordance with IEC60332-1 & NFC 32070 2.1 Synthetic water repellenttape Ø 7.7 mm - Colour blue RAL 5015PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.2 mm - Colour light grey RAL 7035PVC or LSZH in accordance with NFC 32062with flame retardant effect in accordancewith IEC 60332-1 & NFC 32070 2.1Ø 5.5 mm - Colour light grey RAL 7035MARKINGLEGRAND 32777 4 pair 23 AWG S/FTP 100 ohmsLSZH CAT. 7 900 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568B - VPN/NVP .....%Batch no. + length in metresLEGRAND 32778 4 pair 24 AWG F/UTP 100 ohmsLSZH CAT. 6A 500 MHz - VERIFIED TO ISO 11801IEC 60332-1 EN 50173 - TIA/EIA 568B - VPN/NVP .....%Batch no. + length in metresLEGRAND (4 pair or 2x4 pair) 24 AWG UTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metresLEGRAND (4 pair or 2x4 pair) 24 AWG FTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metresLEGRAND 4 pair 24 AWG SFTP 100 ohms250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIEDTO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568ABatch no. + length in metresLEGRAND CAT.NO (4 pair or 2x4 pair)24 AWG UTP 100 ohms (PVC or LSZH) CAT. 5e ECVERIFIED TO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568A Batch no. + length in metresLEGRAND CAT.NO (4 pair or 2x4 pair)CAT. 5e EC VERIFIED TO ISO 11801 IEC 60332-1EN 50173-1 TIA/EIA 568ABatch no. + length in metresSTORAGE/TRANSPORTTEMPERATUREOPERATINGTEMPERATURE0 to +50 °C -20 to +60 °C0 to +50 °C -20 to +60 °C0 to +50 °C -20 to +60 °C0 to +50 °C -20 to +60 °C0 to +50 °C -20 to +60 °C-15 to +70 °C +5 to +40 °C-15 to +70 °C +5 to +40 °CLCS 2 COPPEREnsure high-quality continuity:perfectplug connection and transmission performance...Available in several colours.Individually tested cordsLegrand patch cords ensure high-quality continuity in a cabling systemlike other components. Legrand therefore takes the same care withthe quality of its complete range of RJ 45 cords, which are certified by the3P laboratory as compliant with the standards. See catalogue pagesTests on all parametersLegrand cords are individually tested, both for continuity andtransmission performance. All the parameters are measured: CR, ACR,NEXT, Return loss, Attenuation, etc. Cords which do not meet the criteriaare rejected. These tests guarantee transmission performance from oneend of the system to the other, with both class D and class E.Universal cordsAvailable in cat. 6A, cat. 6 and cat. 5e versions and in the threecabling types (U/UTP, F/UTP and SF/UTP). Legrand cords are availablein different lengths, thus offering considerable flexibility of use.21

LCS 2 FIBRE OPTICA simpleand reliable optionFibre optic drawersSee page 24 to 25LCS 2 FIBRE OPTICConnecting fibresSee page 26 to 2723

LCS 2 Fibre opticdrawerComplete accessibilityand ease in coilingThe new LCS 2 Fibre optic drawergives a better comfort ininstallation and maintenance.Reinforcements facilitating the opening andclosing, end stop inclined at 30° for completeaccessibility, coiling the fibres ensured by thein-built coiling accessories...LCS 2 FIBRE OPTIC19’’ Fibre optic drawerUp to 4 fibre optic blocks can befitted. Equipped with grip handles.Height: Modular 1U.30°Easier cable management.Integrated coiling accessories.Rear in the form of a tailto facilitate connection of incomingcables.Total accessibilityEnd stop, inclined at 30°.Can take allfibre opticconnectorblocksLC connector block.SC connector block.ST connector block.25

Connecting fibresLegrand simplicityand performanceLegrand solutions, including the rapidcrimping connection process andpre-fitted fibre optic links on demandhave made a significant contribution to placing fibreoptics within the reach of installers, particularlyfor links within buildings or between buildings,over distances of less than two kilometres.Split the fibre1Cleave the fibre2Connection takes just 3 minuteswith Legrand rapid connectorsThe average time for making this connectionis less than 3 minutes with rapid connectorsCat.Nos 331 06 to 331 13 incorporating a factorypre-polished fibre. After the operationsto prepare the fibre, there is no longer anyneed to glue or polish, or to check the qualityof the connection under a microscope!No oven, no drying. The factory pre-polishedconnectors and the crimping tool ensure that theoperation is simple and results in a high-qualityconnection.3 4TipConsider leaving some fibresin reserve for future developmentof the installation. If you require2 or 4 fibres now, install cables with6 or 8, or if you require 6 to 8 fibresnow, install cables with 10 to 12.Inspect the fibreInsert the fibre5 6Align the fibreCrimp the fibre26

Pre-fittedfibre opticWhat is delivered?Each link is supplied with a test report. Length stands from connectorto connector, in metres. Links up to 50 m are conditioned in boxes(reel optional) and those over 50 m are supplied by reel. Connectors areprotected by a sheath. Pulling ring included. Multimode 62.5/125 μm cablecomplies with OM1 category, 50/125 μm with OM2 or OM3 categoryand single mode with OS1 category.Pre-fitted fibre optic links on demand:save time and cut risk to a minimum.Order your own individual solution: pre-fitted and factory tested,it will save you time on site while ensuring a high level of linkreliability. This minimises the risk of malfunctionduring the installation, thereby simplifying the acceptance test.LCS 2 FIBRE OPTICHow to order1. Once your preparatory installation work is done,determine the required length of cable.2. Indicate the required type of fibre:- indoor, indoor/outdoor or outdoor- multimode 62.5/125 μm or 50/125 μmor single mode 9/125 μm- number of cores (4, 6, 12, 24 for indoor applications,outdoor applications and indoor/outdoor applications)3. Specify the type of connector: ST, SC or LC.4. State your preferred form of delivery: box or reel.For furtherinformationPlease contact us!27

LCS 2 ENCLOSURESAND CABINETSEasy installationand efficientmaintenanceEnclosuresSee page 30 to 33Server enclosuresSee page 34 to 35LCS 2 ENCLOSURES AND CABINETSWall-mountingcabinetsSee page 36 to 3729

4125330

19’’ LCS 2 enclosuresOptimisedmanagement ofcables and cords1The design of the new LCS 2 enclosuresfacilitates managing the cablesand cords.Easy association of a unit dedicated forcords, cable entry at the top made easy, newfeedthrough panels for perfect organisation ofpatching...EnclosuresCan be fully dismantled in caseof difficulty in accessing.Base allows easier cable entryand provides natural ventilation.LCS 2 ENCLOSURES AND CABINETS5Maintains the bending radiusFeedthrough panels equippedwith rings to guide the cords.23 4Optimised managementof cords and cablesCable guide rack in thecabling unit and onthe sides of the enclosure.Linking interfaceProtects and maintainsthe bending radiusbetween the enclosureand cable duct.Easier cable entryAt the rear of the cabling unit orin the enclosure (extendable 19’’entry plates with brushes).31

21332

19’’ LCS 2 enclosuressimplifiedassemblyEasy markingDual marking of uprightsExample: 7 U from the top,36 U from the base.1The new LCS 2 enclosures canbe very easily assembled anddismantled.A considerable time-saving on thesites, complete accessibility thanksto the removable side and rear panelsand a structure that can be entirelydismantled.2 3LCS 2 ENCLOSURES AND CABINETSTotal accessibilityA structure that can becompletely dismantled.Equipotential bondingclampThe side and rearpanels have an automaticequipotential bonding.Combinations thatanswervarious needsTwo 600-mm-wide enclosureswith a cabling unit.Two 800-mm-wide enclosuresside by side.33

23134

LCS² 19”Server enclosuresCompleteaccessibility1The new LCS 2 server enclosures are designedfor complete accessibility.Complete accessibility not only via the doors andpanels, but also thanks to the high pre-cuts andlow opening.Doors and panels with keylesslock system- front door with handle- perforated front and rear doors - 70% honeycomb.LCS 2 ENCLOSURES AND CABINETS2 3Cable entry- 19” High pre-cuts- Low opening.Cable ductingSupport with screwless trayfixing - Cablofil.35

12336

19’’LCS 2cabinetsEasy access,high-quality finishThe new LCS 2 wall-mounting cabinets canbe fitted anywhere where maintainingaesthetic quality is very important.The removable side panels and flexible cableentries (in the fixed cabinets option)facilitate access for quick installationand easy maintenance.1Total accessibilityAlso available with pivoting bodyto enable easy access to the rear.Removable side panelson all LCS 2 cabinets.2LCS 2 ENCLOSURES AND CABINETSFlexible cable entriesIn DLP trunking system format.3High-quality finishCurved door, screen-printedglass.Also availablein 10’’ versionCompact:LCS 2 cabinet for small businesses.37

LCS 2 WORKSTATIONThe networkat your handZone distributionboxesSee pages 40 to 41LCS 2 WORKSTATIONInstallationsupportsSee pages 42 to 43RJ 45 SocketsSee pages 44 to 45Wi-FiSee pages 46 to 4739

Zone distributionboxes ofLCS 2consolidate andredistribute withcomplete easeWith the new LCS 2 zone distributionboxes connected to the Mosaic or Arteorfeedthrough sockets, the result is completeflexibility.The connections close to the workstation arecentralised, copper and fibre optic are in a singlebox, etc. and the LCS 2 performances are guaranteed.LCS 2 WORKSTATIONFibre optic/RJ 45 unionCopper and fibre areplaced side by side in thesame box.Coil rackFor fibre optic.2 blocks of 6 connectors can be fittedto connect up to 12 RJ 45 socketsDistribution close to the installation supports(see next page).LCS 2 Mosaicor Arteorfeedthroughsockets:Quick and reliableconnection,installation on allsupportsRJ 45 socket with copper feedthrough for RJ 45 - RJ 45 cord.2 x ST fibre optic feedthrough socket for optical patch cord.41

2 471856342

Installation supportcable managementsystems12Network within reach.On the wall with trunking, on the ceilingwith columns, on the ground with floorboxes and desktop multi-outlet extensions ornearby with blocks and mini-columns.They are suitable for all work spaceconfigurations.LCS 2 WORKSTATIONMini-columnsColumns3456CablofilSnap-on trunkingFloor boxesDesktop multi-outletextensions78End-to-end solutions:Legrand cable management systems allowdistribution of VDI cables and power cablesfrom the point of entry to the workstation.Meeting room modulesOffice modules43

44Mosaic RJ 45 socketwith controlled access

Organisationand safetywith the newMosaic socketsIdentify the protectedsupply networksto ensure the protectionof sensitive applications(for example: medicalequipment).Identify and restrictaccess to theuninterrupted powersupply networksto ensure continuouspower supply to computerequipment.In the technical room, in a false ceilingor in the floor boxes and desktop multi-outletextensions, it is necessary to identify thespecial networks at a single glance.Video surveillance, access control, adjustingthe air conditioning, sensitive devices, etc.The Mosaic LCS 2 sockets have a coloured cover,consistent with high-current sockets.Structurethe specialsupplynetworks to isolatethe specificequipmentin the building.LCS 2 WORKSTATIONStructure and protectthe networks byinsulating the sensitiveapplications.Identify the sensitiveinformation networksand control their accessusing a cover that can beunlocked using a key.Structure the remotesupplynetworks(PoE injector) to use telephone,video applications on IP, etc.RJ 45 Socketswith highstandardsof LegrandaccessoriesMosaicWhite or aluminiumCélianePleasing to the eyesArteorFlow of energies45

Wi-Fi that canbe installedjust likeRJ 45 socketsWi-Fi access points can be fittedanywhere where unrestricted accessto the computer network is required.They can be fitted just like the RJ 45 sockets and on anysupports. The stability of performance and the durabilityof products are guaranteed (see page 12).Wi-Fi access points:essential mobility...- In an environment where multiple Wi-Fi networksoperate together, to optimise the available speedeverywhere in the building (in compliance with802.11 a + b/g and 802. 11 n standards).- In reception areas and passages, to provide networkaccess anywhere in the building (in compliance with the802.11 b/g and 802. 11 n standards).- In shared work areas, to connect a computerpermanently and provide a wireless connectionto temporary users (in compliance with the802.11 a + b/g and 802. 11 n standards).LCS 2 WORKSTATIONThe Wi-Fi access points can be mountedon any support:Columns, mini-columns, snap-ontrunking, floor boxes, etc., mural or on Cablofil.LCS 2 PoE injector:Power supply toWi-Fi accesspoints from thepatch panels230 VINData(incoming switch)OUTDATA + POWER SUPPLYPatch cordRJ 45 ConnectorsPatch panelDATA + POWER SUPPLYTwisted paircables47

New LCS Pro 2softwareYour LCS 2 enclosurein a few clicksWith the new LCS Pro 2 software,you can now very easily and quickly selectyour products, view your enclosure, etc.and complete your study with the Chantier Chronosoftware which integrates all installation supports.LCS 2 SERVICESAutomatic determinationof catalogue numbers by selectingthe features and options.Visual display of the installationof the enclosure, modifications possible.For more informationCheck the LCS Pro 2and Chantier Chrono softwaredownloadable fromwww.legrand.countrywww.legrand.??= changecountryEasy management of studiesTechnical records, purchaseorders, document printing.In additionto LCS Pro 2The Chantier Chrono software shows a wide range ofinstallation supports.49

Structured cablingclasses:A top-leveltrainingat InnovalBeing in close contact with engineers at thecutting edge of technological advances,Legrand trainers offer you practical classesin workshops.These are experienced people who understand yourbusiness and speak your language. We offer you veryuseful and practical classes.Checktraining sitewith yourcountryComprehensive classes- Copper installation: essential forcommercial sites- Optical fibre: useand testing of an installation- Copper: use and testingof an installation.Classes to understanddifferent methodsof using an optical backbone and ofconnecting and testingthe optical links, as perthe standards in force.Classes to convert the telephone and computer networkneeds of your clients into complete and upgradeable solutions,and cabling them as per the standards in force.50

Assuranceof performanceTwo guarantees to ensurethe durability of your installationsThe 20-year performance guarantee:Legrand offers the installer the guarantee of continuityof performance levels of an LCS 2 cat. 6A, LCS 2 cat. 6 or LCS 2cat. 5e system on link or channel over time.The 20-year components guarantee: Legrand offers theinstaller the possibility of extending the usual guarantee from2 years to 20 years on all products used in link or channel.- The components guarantee of the LCS 2 cat. 6A, LCS 2cat. 6 or LCS 2 cat. 5e systems: Legrand offers an extendedguarantee on the components of the LCS 2 cat. 6A, LCS 2cat. 6 or LCS 2 cat. 5e systems. 20 years for the components ofchannel or link, i.e. patch panels, RJ 45 sockets, cables andcords.The contractual 2 years guarantee on these products is thusextended to 20 years.Sockets- The channel performance guarantee:A channel is defined by the standards as being an assemblyconsisting of the following components:patch cord, patch panel, cable, RJ 45 socket, usercord. During acceptance testing, the performanceof the channel is measured over a maximum lengthof 100 m. It must remain constant over time.Patch panelPatch panelSocketsActive productCablesCables and cordsComputerThe performance of an installationmust stand the test of time.This is why Legrand guarantees the performanceand the components of its LCS 2 cat. 6A, cat. 6 and cat. 5esystems over the entire channel or link for 20 years.Conditions of the 20-year Performance GuaranteeAs with any guarantee contract, certain conditionsmust be met in order to qualify for the Legrand 20-yearPerformance Guarantee. These conditions are naturallywithin the capabilities of any company specialisedin the installation of structured cabling systems.The main conditions are given below (extracts fromthe 20-year Performance Guarantee issued by Legrand).The installer has stored the components in storageconditions suitable for their type.The installation has been built in strict compliancewith good practice and abiding by all the conditionslisted below.All the components used in the cabling system mustbe Legrand LCS 2 cat. 6A, LCS 2 cat. 6 or LCS 2 cat. 5eCabling Systems components.All the patch cords used must be original Legrandproducts.The max. length of a cord must be 5 m.The installation must be built in accordancewith the recommendations defined in installationstandards EN 50174, EN 55022 and UTE C 15-900in force at the time of issue of the guarantee.Prior to the signature of the guarantee contract,Legrand will check that the installation acceptancetest data comply with the values specifiedin the standard.The installer must submit the following 4 documentsto Legrand:- The installation acceptance test for the linkor the channel- The “14 key points of a high performance installation”form, ticked and signed as agreement on its partof having complied with the 14 points- A full list of the products installed- An installation diagram of the patch cabinetsand the RJ 45 sockets.Any subsequent modifications or extensions must complywith the conditions listed above.LCS 2 SERVICES51

selection chart for equipment and enclosuresconfigure your LCS 2 systemSELECT RJ 45 SOCKETS AND WI-FI MOSAIC ACCESS POINTSLCS 2 cat. 6A LCS 2 cat. 6 LCS 2 cat. 5e1 module2 modulesSTP White 765 73 765 63 -UTP White - 765 61 765 51STP White 765 76 765 66 -UTP White - 765 64 765 542 modules with 45° incline UTP White - 765 03 765 01With controlled accessSockets at 90°AntimicrobialSTP White 765 99 765 96 -UTP White - 765 94 765 97STP White - 765 93 -UTP White - 765 91 -STP White - 765 83 -UTP White - 765 81 -2 x RJ 45 sockets UTP White - 765 44 765 41Green shutterOrange shutterSTP White 765 24 - -FTP White - 765 22 -STP White 765 25 - -FTP White - 765 23 -Copper feedthroughs UTP White - 786 22 786 20Doubler socketsManageable Wi-Fi access pointsEthernet/Ethernet UTP 765 38 765 38 765 38Telephone/Ethernet UTP 765 36 765 36 765 36Telephone/telephone 765 35 765 35 765 35With RJ 45 socket, dual-band anddual-radio779 14 779 14 779 14Dual-band and dual-radio 779 13 779 13 779 13SELECT LCS 2PANELS AND CONNECTOR UNITSPatch panels 1USTP 335 73 335 63 -Fitted with 24 connectorsUTP - 335 61 335 51Units of 6 x RJ 45 connectorsSTP 335 76 335 66 -UTP - 335 64 335 54Blanking plate 335 91 335 91 335 91Patch panel 1 uTo be fitted with 4 units335 90 335 90 335 90SELECT ADDITIONAL LCS 2 PANELS AND UNITSLCS 2Telephone panels 1 UFitted with 4 x 12 port extensionsTelephone extensionsFitted with 12 ports3-6/4-5 contacts (digital) 335 314-5/7-8 contacts (analogue) 335 303-6/4-5 contacts (digital) 335 334-5/7-8 contacts (analogue) 335 32Ethernet/Ethernet UTP 335 38Doubler unitsTelephone/Ethernet UTP 335 36Telephone/telephone 335 35Video streaming unit 6 x "F" connectors 335 34Switch units7 x RJ 45 ports 335 026 x RJ 45 ports + 1 LC type optic port 335 05Power over Ethernet (PoE) injector 4 ports 335 0152

selection chart for equipment and enclosuresconfigure your LCS 2 system (continued)SELECT FIBRE OPTIC EQUIPMENTMonomodeMultimodeLC unitsFor 6 fibres 335 13 335 18High density - For 12 fibres - 335 19SC units For 6 fibres 335 12 335 17ST unit For 6 fibres - 335 16Copper/fibre optic converters10/100 base T to 10/100 base SX - 335 061000 base T to 1000 base SX/LX - 335 07SELECT 19" LCS 2 FEEDTHROUGH PANELSSELECT 19" LCS 2Switch units 6 x RJ 45 ports + 1 LC type optic port 335 05 335 05Fibre optic enclosures 1 U - For 4 fibre optic units 335 10 335 10Fibre optic cassettes for patch panel 335 11 335 11Metal, 2 axes, quick-fixingPlastic with brushes, direct clippingMetal with brushes, quick-fixingSELECT PATCH CORDS AND RJ 45 USERS1U 465 222U 465 231U 465 282U 465 291U 465 302U 465 319 sockets 465 506 sockets 465 546 socketsSwitch with indicator332 88Socket units 2P+E 2 U6 socketsDouble-pole circuit-breaker332 376 socketsFor safeguarded circuit332 879 sockets Schuko 465 606 sockets Schuko 465 626 socketsUnit with surge suppressor 2 USwitch with indicator332 78Replacement module 775 41Modular unit 2 U Takes 16 Mosaic modules 332 79DIN rail kit IP 2X - 2 U For Lexic modular devices 465 45SF/UTPF/UTPU/UTPSELECT COPPER CABLES (305 OR 500 M REELS)Impedance 100 OhmsImpedance 100 OhmsImpedance 100 Ohms1 m 517 80 517 52 -2 m 517 81 517 53 -3 m 517 82 517 54 -5 m 517 83 517 55 -0.3 m - - 516 910.6 m - - 517 171 m - 517 62 516 402 m - 517 63 516 413 m - 517 64 516 425 m - 517 65 516 431 m - 517 72 -2 m - 517 73 -3 m - 517 74 -5 m - 517 75 -S/FTP 4 pairs 500 m 327 77 - -4 pairs 500 m - 327 57 -SF/UTP2 x 4 pairs 500 m - 328 59 -305 m - 328 56 327 524 pairsF/UTP500 m 327 78 327 56 328 502 x 4 pairs 500 m - 327 76 327 74305 m - 327 54 327 504 pairsU/UTP500 m - 328 61 328 532 x 4 pairs 500 m - 328 63 328 5553

selection chart for equipment and enclosuresconfigure your LCS 2 system (continued)SELECT 19" LCS 2 ENCLOSURES Depth 600 mm Depth 800 mm Depth 1000 mm24 U Width 600 mm 463 00 - -29 U Width 600 mm 463 06 - -33 U Width 600 mm 463 12 - -Width 600 mm 463 18 463 19 -42 UWidth 800 mm 463 21 463 22 463 2347 U Width 800 mm - 463 28 463 29SELECT 19" LCS 2 EXTENSION ENCLOSURES Depth 600 mm Depth 800 mm42 UWidth 600 mm 463 30 -Width 800 mm - 463 33SELECT 19" LCS 2 SERVER ENCLOSURES Depth 1000 mm42 UWidth 600 mm 463 85Width 800 mm 463 86SELECT EQUIPMENT FOR 19" LCS 2 For enclosure For enclosure For enclosureENCLOSURESdepth 600 mm depth 800 mm depth 1000 mm42 U cabling units 463 34 463 35 -Base for cabling unit, trap height 100 mm 464 64 (1) 464 64 (1) -Joining kits 463 37 463 38 463 39Sets of 2 solid side traps for enclosure base 464 54 (2) 464 56 (2) 464 58 (2)Ventilated traps, 1 trap height 100 mm 464 60 464 61 -Traps with brushes, 1 panel height 100 mm 464 62 464 63 -Stay plates 476 93 476 94 476 95Linking interface 464 66 - -Depth 115 mm 465 00 465 00 465 00Fixed shelvesDepth 200 mm 465 01 465 01 465 01Projecting mounting on 2 x 19" uprightsDepth 360 mm 465 02 465 02 465 02Fixed shelves. Quick mounting on 4 x 19" uprights (excludes server enclosures) 465 05 465 06 465 07Fixed shelf. Screw fixed on 4 x 19" uprights - - 465 17Telescopic shelves. Quick mounting on 4 x 19" uprights (excludes server enclosures) 465 08 465 09 465 10Telescopic shelf. Screw fixed on 4 x 19" uprights - - 465 18Set of 2 fixed runners 465 11 465 12 465 13Height 100 mm Height 200 mmEnclosure base kitsFor width 600 mm 464 50 464 52For width 800 mm 464 51 464 53SELECT 19" LCS 2 CABLE ENTRIES FOR TOP AND BOTTOM ANDBLANKING PLATESPlastic cable entries with brushes, direct clippingSolid plastic blanking plates, direct clippingMetal cable entries with brushes, quick-fixingSolid metal blanking plates, quick-fixingFor enclosures1U 465 282U 465 291U 465 322U 465 331U 465 302U 465 311U 465 382U 465 393U 465 40SELECT CABLING MANAGEMENT EQUIPMENTFor enclosure width/depth 600 mm 464 72Sets of 3 cable management supports For enclosure width/depth 800 mm 464 73For enclosure depth 1000 mm 464 74Flat cable guidesFor enclosure 33 U 464 76For enclosure 42 U 464 77U-shaped cable guidesWidth 200 mm 464 69Width 400 mm 464 70Cord management grille For enclosure 42 U, width 800 mm 331 35Vertical feedthrough For enclosure 42 U, width 800 mm 464 80Patch extension For enclosure 42 U, width 800 mm 464 81SELECT THERMAL MANAGEMENT EQUIPMENT AND ACCESSORIES19" plates 3U with 230 V fans2 fans 464 873 fans 464 88Ventilation enclosuresFor enclosure depth 600/800 mm 464 89For enclosure depth 800/1000 mm 464 90Thermostat Adjustable range 5 to 60 °C 348 48Set of 4 casters 464 83Set of 4 casters for server enclosure 464 82Accessories230 V Lighting kit 464 85Level adjustment kit 464 84Floor fixing kit 464 86(1) Double the number of traps for a height of 200 mm(2) Order 2 sets for a base height of 200 mm (Cat.Nos 464 52/53)54

selection chart for equipment and enclosuresconfigure your LCS 2 system (continued)SELECT 19" LCS 2 CABINETS AND EQUIPMENTFIXEDPIVOTINGDepth 400 mm Depth 580 mm Depth 600 mm6 U Height 350 mm 462 00 - -9 U Height 500 mm 462 01 462 06 462 1112 U Height 600 mm 462 02 462 07 462 1216 U Height 800 mm 462 03 462 08 462 1321 U Height 1000 mm - 462 09 462 14Depth 115 mm 465 00 465 00 465 00Fixed shelvesDepth 200 mm 465 01 465 01 465 01Depth 360 mm - 465 02 465 02Cable entry plate with brush - - 462 55Equipment230 VA fan 462 60 462 60 462 60Thermostat 348 48 348 48 348 48Set of 4 casters - - 462 64SELECT FIBRE OPTIC PATCH CORDSST/ST duplex cordsSC/SC duplex cordsSC/LC duplex cordsST/SC duplex cordsLC/LC duplex cordsOS 1 (UPC)monomode9/125 μmOM 3multimode50/125 μmOM 2multimode50/125 μm1 m - - 330 802 m - - 330 813 m - - 330 821 m 326 00 326 09 330 692 m 326 01 326 10 330 703 m 326 02 326 11 330 711 m 326 03 326 12 330 752 m 326 04 326 13 330 633 m 326 05 326 14 330 762 m - - 330 723 m - - 330 731 m 326 06 326 152 m 326 07 326 16 330 613 m 326 08 326 17LC/ST duplex cord 2 m - - 330 65SELECT OPTIC CABLES (2000 M REELS)6 fibres 325 12 325 10 325 08Internal/external, anti-rodent12 fibres - 325 11 325 09External, anti-rodent reinforced steel 6 fibres 325 13 - -LCS 2 zone distribution boxes LCS 2 cat. 6 LCS 2 cat. 5eZone distribution boxesFitted with 12 x RJ 45 connectorsUnits of 6 x RJ 45 connectorsSTP 335 46 -FTP 335 45 -UTP 335 44 -STP 335 66 -FTP 335 65 335 55UTP 335 64 335 54Fibre optic accessory 335 20 335 20Zone distribution boxTo be fitted with 4 units335 40 335 4055

NEW LCS PRO 2 SOFTWARE>>>Your LCS 2 enclosurein a few clicksLegrand cabling system LCS 2category 6Apatch panels, blocks of connectorsNEWSelect your products and visualise yourenclosure simply and quickly with the newLCS Pro 2 software...and complete your study with ChantierChrono software which integrates trunking,columns, floor and feeder boxes335 73335 90LCS Pro 2 allows you toautomatically find Cat.Nosby selecting characteristicsoptionsLCS Pro 2 lets you visualisethe enclosure installationand amend it if required335 76Pack Cat.Nos Patch panel cat. 6A24 x RJ 45 connectorsConnector cat. 6Ashielded STPPanel supplied with quick-fixingAll enclosures or cabinets general assemblyPanel ensures automatic grounding of each connectorFitted with rear cable guide to hold cables duringmaintenanceFitted with 4 units of 6 LCS 2 RJ 45 connectors cat. 6Awith fast connection thanks to integrated crimping,with wiring schemes T 568 A and T 568 BSupplied with numbered colour labelsConform to standards ISO/IEC 11801 Ed. 2.0, draftamendment 2, EN 50173-2 and EIA/TIA 568 B2.1019" panel - 1 U1 335 73 STP - Metal shielding 360°LCS Pro 2 allows you toeasily manage yourstudies: technicalsummaries, purchaseorders, document printingIn addition to LCS Pro 2 , Chantier Chrono extends the selectionto trunking, columns, floor and feeder boxesModular panelPanel supplied with quick-fixingAll enclosures or cabinets general assemblyPanel ensures automatic grounding of each connectorFitted with rear cable guide to hold cables duringmaintenanceModular empty panel for up to 4 unitsTake the following equipment:- units of 6 x LCS 2 RJ 45 connectors- telephone inlet units- fibre optic units- PoE injector units- video streaming units- switch units- telephone/Ethernet doubler units- copper/fibre optic converter units- blanking plates1 335 90 19" panel - 1 UUnits of 6 x RJ 45 connectors cat. 6AFitted with 6 x LCS 2 RJ 45 connectors cat. 6A withfast connection thanks to integrated crimping, withwiring schemes T 568 A and T 568 BSupplied with colour labelsConform to standards ISO/IEC 11801 Ed. 2.0, draftamendment z, EN 50173-2 andEIA/TIA 568 B2.102 335 76 STP unit - metal shielding 360°10 335 91 Blanking plate for 19" panel - Black56

Legrand cabling system LCS 2category 6AcablesNEWLegrand cabling system LCS 2category 6Acords327 77517 82Pack Cat.Nos Cables for local networks cat. 6ALSZHCables 4 pairs or 2 x 4 twisted pairs 100 ohmsLSZH sleeve: halogen-freeYellow RAL 1018Colour code EIA/TIAConform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10Performance 500 MHzF/UTP - 4 pairsPerformance 500 MHz500 (1) 327 78 Length 500 mSupplied on reel. Weight 25 kgF/UTP - 2x4 pairsPerformance 500 MHz500 (1) 328 78 Length 500 mSupplied on reel. Weight 65 kgS/FTP - 4 pairsPerformance 600 MHz500 (1) 327 77 Length 500 mSupplied on reel. Weight 30 kgPack Cat.Nos RJ 45 patch cords and user cords cat. 6APVC5 517 80 Length 1 m5 517 81 Length 2 m5 517 82 Length 3 m5 517 83 Length 5 mLSZH5 518 70 Length 1 m5 518 71 Length 2 m5 518 72 Length 3 m5 518 73 Length 5 m5 518 66 Length 1 m5 518 67 Length 2 m5 518 68 Length 3 m5 518 69 Length 5 mRJ 45 - RJ 45 rightConform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10S/FTP shielded impedance 100 Ω(1) in metre(s)57

LCS 2 ZONE DISTRIBUTIONBOXES>>>Legrand cabling system LCS 2category 6Azone distribution boxesNEWAccessoryconnectionequipmentComplete flexibility with the new LCS 2 zoneboxes: centralisation of connections close tothe work station, coexistence of copper andfibre optics335 40Pack Cat.Nos Zone distribution boxesFor distribution of low current in a zone fitted with 1 to12 RJ 45 socketsCentralise connections to guarantee flexibility andadaptability of the installationInstalled on false ceiling or false floorConnect to the patch panel or the floor cabinetConnection to workstation for RJ 45 cordsCan take switch Cat.No 335 02 or PoE injectorCat.No 335 01 or 6 connector unit Cat.No 335 76Conform to standards UTE C 15-900, NF C 15-100,NF C 20-730, EN 50-174.2, CEI 60950,ISO/IEC 11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568Colour code EIA/TIA 568 A and BCords and cables: ISO 11801 id.2.0, EN 50173-1,EIA/TIA 568Technical characteristics:- polycarbonate PC hood- polypropylene PP base- RAL 7035- holds connector units in place on the box: 100 N- cables anchored on support using Colring cable tiesSelf-assembly zone distribution box1 335 40 Used for mounting LCS 2 RJ 45 connector blockscat. 6A (p. 56), cat. 6 (p. 60) and cat. 5e (p. 66),of fibre optic accessories or blanking plates> Flexible installation with lines in reserve tomeet future requirements quickly> Reliable and fast connection to the LCS 2 zonebox with sockets with copper and fibre opticfeedthrough and RJ 45/RJ 45 cords> Guaranteed performance across the wholeLCS 2 system58

Legrand cabling system LCS 2category 6ARJ 45 socketsNEW765 73765 76 794 76765 24765 25765 99 673 46 + enjoliveur Titane 685 51Sockets with LCS 2 connector with fast connection thanks to integrated crimpingTake AWG 22 single-core cables up to AWG 26 and AWG multicore cablesContacts marked with dual colour code and wiring schemes T 568 A and T 568 BConforms to standards ISO/IEC 11801 Ed. 2.0, draft amendment 2, EN 50173-1 and EIA/TIA 568 B2.10Pack Cat.Nos Mosaic RJ 45 sockets cat. 6A360° metal shieldingSTP - 1 module10 765 73 White10 794 73 AluminiumSTP - 2 modules10 765 76 White10 794 76 Aluminium10 765 24 White with green shutter10 765 25 White with orange shutterSTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 765 99 White with red shutterPack Cat.Nos Arteor RJ 45 socket cat. 6A360° metal shieldingSTP - 1 module10 5723 06 White10 5728 06 Magnesium10 5723 52 White with green shutter10 5728 52 Magnesium with green shutter10 5723 51 White with orange shutter10 5728 51 Magnesium with orange shutterSTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 5723 50 White with red shutter5 5728 50 Magnesium with red shutterCeliane RJ 45 socket, cat. 6ASTP plug - 360° metal shielding10 673 46 To create a 1-gang socket, combinemechanism Cat.No 673 46 and a cover plateCat.No 682 51 (white) or Cat.No 685 51(titanium)To create a 2-gang socket, combine2 mechanisms Cat.Nos 673 46 and a cover plateCat.No 682 52 (white) or Cat.No 685 52 (titanium)AvailableJanuary 2011Keystone RJ 45 socket cat. 6A10 331 54 STP socket - metal shielding 360° with fastconnection thanks to integrated crimpingMosaic Program audio/videosocketssee p. 8059

Legrand cabling system LCS 2category 6patch panels, blocks of connectorsNEW335 62 335 90335 65Connecteur cat. 6STP blindéPack Cat.Nos Patch panels cat. 624 x RJ 45 connectorsPanels supplied with quick-fixingAll enclosures or cabinets general assemblyPanels ensure automatic grounding of each connectorFitted with rear cable guide to hold cables duringmaintenanceFitted with 4 units of 6 LCS 2 RJ 45 connectors cat. 6with fast connection thanks to integrated crimping,with colour code and wiring schemes T 568 A andT 568 BSupplied with numbered colour labelsConform to standards ISO/IEC 11801 Ed. 2.0, draftamendment 2, EN 50173-2 and EIA/TIA 568 B2.1019" panel - 1 U1 335 61 UTP panel - 8 contacts1 335 62 FTP panel - 9 contacts1 335 63 STP panel - metal shielding 360°UTP through panel24 x RJ 45 connectors1 335 89 UTP through panelPack Cat.Nos Modular panelsPanels supplied with quick-fixingGeneral all-purpose assembly of all enclosuresor cabinetsPanels ensure automatic earthing of each connectorFitted with rear cable guide to hold cables duringmaintenance Empty panels to be fitted with 4 unitsTake the following equipment:- 6 LCS 2 RJ 45 connector units- telephone inlet units- fibre optic units- PoE injector units- video streaming units- switch units- telephone/Ethernet doubler units- copper/fibre optic converter units- blanking plates1 335 90 19" panel - 1 UAvailableJanuary 20111 xxx xx 19" angled panel - 1 UUnits of 6 x RJ 45 connectors cat. 6Fitted with 6 x LCS 2 RJ 45 connectors cat. 6 with fastconnection thanks to integrated crimping, with colourcode and wiring schemes T 568 A and T 568 BSupplied with colour labelsConform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 5682 335 64 UTP unit - 8 contacts2 335 65 FTP unit - 9 contacts2 335 66 STP unit - metal shielding 360°10 335 91 Blanking plate for 19" panel - Black60

Legrand cabling system LCS 2category 6cablesNEWLegrand cabling system LCS 2category 6cords327 54517 62Pack Cat.Nos Cables for local networks cat. 6Cables 4 pairs or 2 x 4 twisted pairs100 ohmsBlue RAL 5015Colour code EIA/TIAConform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10LSZH PVC U/UTP - 4 pairs305 (1) 327 54 Length 305 mSupplied in cardboard box. Weight 16 kg500 (1) 328 61 Length 500 mSupplied on reel. Weight 18 kg1000 (1) 328 71 Length 1000 mSupplied on reel305 (1) 327 55 Length 305mSupplied in cardboard box. Weight 13 kg500 (1) 328 62 Length 500 mSupplied on reel. Weight 19 kg1000 (1) 328 72 Length 1000 mSupplied on reelU/UTP - 2 x 4 pairs500 (1) 328 63 Length 500 mSupplied in cardboard box. Weight 38 kgF/UTP - 4 pairs305 (1) 328 56 Length 305 mSupplied on reel. Weight 17 kg500 (1) 327 56 Length 500 mSupplied on reel. Weight 25 kgF/UTP - 4 pairs305 (1) 328 57 Length 305 mSupplied in cardboard box. Weight 17 kg500 (1) 327 58 Length 500 mSupplied on reel. Weight 25 kgF/UTP - 2 x 4 pairs50 (1) 327 76 Length 500 mSupplied on reel. Weight 48 kg500 (1) 328 58 Length 500 mSupplied on reel. Weight 45 kgSF/UTP - 4 pairs500 (1) 327 57 Length 500 mSupplied on reel. Weight 29 kg500 (1) 327 59 Length 500 mSupplied on reel. Weight 30 kgSF/UTP - 2 x 4 pairs500 (1) 328 59 Length 500 mSupplied on reel. Weight 52 kgPack Cat.Nos RJ 45 patch cords and user cordscat. 6RJ 45 - RJ 45 rightPVC1 517 72 Length 1 m1 517 73 Length 2 m1 517 74 Length 3 m1 517 75 Length 5 mLSZH1 518 62 518 58 Length 1 m1 518 63 518 59 Length 2 m1 518 64 518 60 Length 3 m1 518 65 518 61 Length 5 mPVC1 517 62 Length 1 m1 517 63 Length 2 m1 517 64 Length 3 m5 517 65 Length 5 mLSZH1 518 54 518 50 Length 1 m1 518 55 518 51 Length 2 m1 518 56 518 52 Length 3 m1 518 57 518 53 Length 5 mPVC5 517 52 Length 1 m5 517 53 Length 2 m5 517 54 Length 3 m5 517 55 Length 5 mU/UTP unscreened impedance 100 ΩF/UTP screened impedance 100 ΩSF/UTP shielded impedance 100 Ω(1) in metre(s)61

Legrand cabling system LCS 2category 6zone distribution boxesNEWLegrand cabling system LCS 2category 6cords specifically for zone distribution boxes335 46517 57335 40RJ 45 RJ 45Connection principle335 40 fitted with SC fibre optic unit, accessoryCat.No 335 20 and a 6 x RJ 45 connector unitPack Cat.Nos Zone distribution boxes335 20 accessoryfibre opticsFordistributionoflowcurrentinazonefittedwith1to12 RJ 45 sockets Centralise connections to guaranteeflexibility and adaptability of the installationInstalled on false ceiling or false floorConnect to the patch panel or the floor cabinetConnection to an RJ 45 socket with stripped cord orto a Mosaic RJ 45 socket with copper feedthroughwith an RJ 45/RJ 45 cordIP 21 - IK 07Conform to standards UTE C 15-900, NF C 15-100,NF C 20-730, EN 50-174.2, CEI 60950,ISO/IEC 11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568Colour code EIA/TIA 568 A and BCords and cables: ISO 11801 id.2.0, EN 50173-1,EIA/TIA 568Technical characteristics:- polycarbonate PC hood- polypropylene PP base- RAL 7035- holds connector units in place on the box: 100 N- Cables anchored on support using Colring cable tiesZone distribution boxes cat. 6Fitted with 2 x 6 LCS 2 connector blocksRJ 45 cat. 6 and RJ 45 blanking platesSupplied with Colring cable ties1 335 44 UTP1 335 45 FTP1 335 46 STPSelf-assembly zone distribution box1 335 40 Used for mounting LCS 2 RJ 45 connector blockscat. 6 (p. 60)Pack Cat.Nos Cords cat. 6 - RJ 45/stripped AWG 24RJ 45 - straight strippedClip on and off in the zone distribution boxesand connection via LCS 2 connectorof an RJ 45 socket by the stripped sideCords prepared in factory, "ready for wiring".Conform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 568Blue RAL 5015U/UTP unscreened impedance 100 Ω4 517 57 Length 8 m4 517 58 Length 15 m4 517 59 Length 20 mF/UTP screened impedance 100 Ω4 517 96 Length 8 m1 517 97 Length 15 m4 517 98 Length 20 mCords cat. 6 - RJ 45/RJ 45For direct connection via RJ 45 male plug to thezone distribution box and to the RJ 45 socket withcopper feedthrough to ensure:- safe connection- speed and reliability of connectionBlue RAL 5015U/UTP unscreened impedance 100 Ω4 515 10 Length 8 m4 515 11 Length 15 m4 515 12 Length 20 mF/UTP screened impedance 100 Ω4 515 13 Length 8 m4 515 14 Length 15 m4 515 15 Length 20 m62

Legrand cabling system LCS 2category 6feedthrough socketsNEWLegrand cabling system LCS 2category 6110 Cross Connect System blocks and patch cords cat. 6786 226339 70Pack Cat.Nos Sockets with copper feedthrough cat. 6Easy connection at the rear through simply attachinga male plugEnsures network access for the RJ 45 socketUsed to create links cat. 6According to standards ISO 11801 Ed.2, EN 50173-1and EIA/TIA 568 within the framework of operationwith zone distribution boxesMultidirectional cord entryInstallation possible in all supports with min. 40 mmdepth2 modulesMosaic Cat. 6 UTP Mosaic10 786 22 White10 786 26 Aluminium6339 296339 72Cat. 6 FTP Mosaic10 786 23 White10 786 27 AluminiumCat. 6 UTP ArteorArteor10 5723 31 White10 5728 31 MagnesiumCat. 6 FTP Arteor10 5723 33 White10 5728 33 Magnesium6339 73Pack Cat.Nos Block kits With legs1 6339 24 48-pair in 50-pair footprint1 6339 25 96-pair in 100-pair footprint1 6339 26 288-pair in 300-pair footprintWithout legs1 6339 27 48-pair in 50-pair footprint1 6339 28 96-pair in 100-pair footprint1 6339 29 288-pair in 300-pair footprintPatch cords110/110 - 4 pairs10 6339 12 Length 1 m10 6339 13 Length 1.5 m10 6339 14 Length 3 m110/RJ 45 - 4 pairs10 6339 15 Length 1 m10 6339 16 Length 1.5 m10 6339 17 Length 3 mAccessories110 tool1 332 60 110 tool1 332 61 Replacement bladeDesignation labelling Kits5 6339 68 Pack of two clear strips and white paperRivets1 6339 71 Rivets (pack of 12)110 jumper troughs1 6339 69 With legs, 27.3 x 6.83 x 11.9 mm1 6339 70 Without legs, 21.6 x 6.83 x 6.83 mm19" enclosure mount 110 panel1 6339 72 Panel for 2 x 100-pair blocks without legs, 2 U1 6339 73 Panel for 2 x 100-pair blocks and two troughs withoutlegs, 4 U63

Legrand cabling system LCS 2category 6RJ 45 socketsNEW765 63 765 96 794 65794 33 + cover plate 790 14Sockets with LCS 2 connector with fast connection thanks to integrated crimpingTake AWG 22 single-core cables up to AWG 26 and AWG 24 multicore cablesContacts marked with dual colour code and wiring schemes T 568 A and T 568 B. Conforming to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 andEIA/TIA 568Pack Cat.Nos Mosaic RJ 45 sockets cat. 6UTP - 1 module10 765 61 White10 794 61 Aluminium10 765 81 White antimicrobialUTP - 2 modules10 765 64 White10 794 64 AluminiumUTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 765 94 White with red shutterUTP 90° - 2 modulesVertical snap-on socket for column module10 765 91 WhiteUTP 45° - 2 modules1 765 03 WhiteUTP 45° - 2 x RJ 45 - 2 modules1 765 04 WhiteUTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton1 765 32 WhiteUTP 2 x RJ 45 with Soluclip accessory - 3 modulesFor snap-on mounting on DLP trunking with 45 mmcover5 765 44 WhitePack Cat.Nos Mosaic RJ 45 sockets cat. 6 (continued)FTP - 1 module10 765 62 White10 794 62 Aluminium10 765 82 White antimicrobialFTP - 2 modules10 765 65 White10 794 65 Aluminium10 765 22 White with green shutter10 765 23 White with orange shutterFTP 2 x RJ 45 with Soluclip accessory - 3 modulesFor snap-on mounting on trunking with 45 mm cover5 765 46 WhiteFTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 765 95 White with red shutterFTP 45° - 2 modules10 765 05 WhiteFTP 2 x RJ 45 45° - 2 modules5 765 06 WhiteFTP retractable RJ 45 sockets - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton1/10 765 33 White1/10 794 33 AluminiumFTP 90° - 2 modulesVertical snap-on socket for column module10 765 92 White10 794 92 AluminiumShielded STP - 1 module10 765 63 White5 765 83 White antimicrobialShielded STP - 2 modules10 765 66 WhiteShielded STP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 765 96 White with red shutterShielded STP 90° - 2 modulesVertical snap-on socket for column module10 765 93 White64

Legrand cabling system LCS 2category 6RJ 45 socketsNEW673 45 + cover plate titanium 685 51 778 91695 69Pack Cat.Nos Arteor RJ 45 socket cat. 6Pack Cat.Nos Celiane RJ 45 sockets cat. 6UTP - 1 module10 5723 02 White10 5728 02 MagnesiumUTP - 2 modules10 5723 14 White10 5728 14 MagnesiumUTP - 2 modules - round10 5723 24 White10 5728 24 MagnesiumUTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 5723 53 White with red shutter5 5728 53 Magnesium with red shutterUTP retractable RJ 45 sockets - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton1 5723 39 White1 5728 39 MagnesiumUTP socketTo create a 1-gang socket, combine mechanismCat.No 673 44 and a cover plate Cat.No 682 51(white) or Cat.No 685 51 (titanium)To create a 2-gang socket, combine 2 mechanismsCat.No 673 46 and a cover plate Cat.No 682 52(white) or Cat.No 685 52 (titanium)10 673 44 UTP socketUTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton10 673 54 To create a 1-gang socket, combine mechanismCat.No 673 54 and a cover plate Cat.No 682 55 (white)or Cat.No 685 55 (titane)FTP socketTo create a 1-gang socket, combine mechanismCat.No 673 45 and a cover plate Cat.No 682 51(white) or Cat.No 685 51 (titanium). To create a2-gang socket, combine 2 mechanismsCat.Nos 673 46 and a cover plate Cat.No 682 52(white) or Cat.No 685 52 (titanium)10 673 45 FTP socketFTP - 1 module10 5723 22 White10 5728 22 Magnesium10 5723 54 White with orange shutter10 5728 54 Magnesium with orange shutter10 5723 55 White with green shutter10 5728 55 Magnesium with green shutterFTP - 2 modules10 5723 16 White10 5728 16 MagnesiumShielded STP - 1 module10 5723 23 White10 5728 23 MagnesiumShielded STP - 2 modules10 5723 17 White10 5728 17 MagnesiumFTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9 m)Winds up automatically with a pushbutton10 673 55 To create a 1-gang socket, combine mechanismCat.No 673 55 and a cover plate Cat.No 682 55 (white)or Cat.No 685 55 (titane)STP socketTo create a 1-gang socket, combine mechanismCat.No 673 96 and a cover plate Cat.No 682 51(white) or Cat.No 685 51 (titanium). To create a2-gang socket, combine 2 mechanismsCat.No 673 46 and a cover plate Cat.No 682 52(white) or Cat.No 685 52 (titanium)10 673 96 STP socketKeystone RJ 45 sockets cat. 610 331 81 UTP socket connected with 110 toolSoliroc RJ 45 sockets cat. 6 - IK 1010 778 91 IP 20For at-risk areas or areas with no surveillanceFTP socketPlexoRJ 45 sockets cat. 6 -IP55 closedflap IK 07Protection against water, dustFor industrial sites5/100 695 69 FTP socketGrey/white1/20 695 61 UTP socketGrey/white1 695 81 Adapter for RJ 45 socketWeatherproofing ensured (IP 44)plug insertedGrey/whiteMosaic and Arteor sockets with copperfeedthrough (p. 63)Mosaic and Arteor audio/video sockets (p. 80)65

Legrand cabling system LCS 2category 5epatch panels, blocks of connectorsNEW335 52 335 90335 55Connecteur cat. 5e FTPPack Cat.Nos Patch panels cat. 5e24 x RJ 45 connectorsPanels supplied with quick-fixingAll enclosures or cabinets general assemblyPanels ensure automatic grounding of each connectorFitted with rear cable guide to hold cables duringmaintenanceFitted with 4 units of 6 LCS 2 RJ 45 connectors cat 5ewith fast connection thanks to integrated crimping,with colour code and wiring schemes T 568 A andT 568 BSupplied with colour labels numbered from 1 to 24Conform to standards ISO/IEC 11801Ed. 2.0, EN 50173-1 and EIA/TIA 56819" panel - 1 UUTP panel1 335 51 UTP panel - 8 contactsFTP panel1 335 52 FTP panel - 9 contactsUTP through panel24 RJ 45 connectors1 335 88 UTP through panelPack Cat.Nos Modular panelsPanels supplied with fast assemblyAll enclosures or cabinets general assemblyPanels ensure automatic grounding of eachconnectorFitted with rear cable guide to hold cables duringmaintenanceModular empty panels for up to 4 units Takes thefollowing equipment:- units of 6 LCS 2 RJ 45 connectors- units for telephone inlets- fibre optic units- PoE injector units- video streaming units- switch units- telephone/Ethernet doubler units- copper/fibre optic converter units- blanking plates1 335 90 19" panel - 1 UAvailableJanuary 20111 xxx xx 19" angled panel - 1 UUnits of 6 x RJ 45 connectors cat. 5eFitted with 6 x LCS 2 RJ 45connectors cat. 5e with fast connection thanks tointegrated crimping, with colour code and wiringschemes T 568 A and T 568 BSupplied with colour labelsConforms to standards ISO/IEC 11801Ed. 2.0,EN 50173-1 and EIA/TIA 5682 335 54 UTP unit2 335 55 FTP unit10 335 91 Blanking plate for 19" panel - Black66

Legrand cabling system LCS 2category 5ecablesNEWLegrand cabling system LCS 2category 5ecords328 50 516 40Pack Cat.Nos Cables for local networks cat. 5e4 twisted pair cables 100 ohmsLSZH sleeve: non-halogenGrey RAL 7035Colour code EIA/TIALSZH PVC U/UTP - 4 pairs305 (1) 327 50 Length 305mSupplied in cardboard box. Weight 10 kg500 (1) 328 53 Length 500 mSupplied on reel. Weight 15 kg1000 (1) 328 73 Length 1000 mSupplied on reel305 (1) 327 51 Length 305mSupplied in cardboard box. Weight 9 kg500 (1) 328 54 Length 500 mSupplied on reel. Weight 15 kg1000 (1) 328 74 Length 1000 mSupplied on reelU/UTP - 2x4 pairs500 (1) 328 55 Length 500 mSupplied on reel. Weight 34 kg500 (1) 327 73 Length 500 mSupplied on reelF/UTP - 4 pairs305 (1) 327 52 Length 305 mSupplied in cardboard box. Weight 12 kg500 (1) 328 50 Length 500 mSupplied on reel. Weight 21 kg305 (1) 327 53 Length 305 mSupplied by box. Weight 11 kg500 (1) 328 51 Length 500 mSupplied on reel. Weight 20 kgF/UTP - 2x4 pairs500 (1) 327 74 Length 500 mSupplied on reel. Weight 38 kg500 (1) 328 52 Length 500 mSupplied on reel. Weight 34 kgPack Cat.Nos RJ 45 patch cords and user cords cat. 5ePVCRJ 45 - RJ 45 right1 516 36 Length 1m1 516 37 Length 2m1 516 38 Length 3m1 516 39 Length 5mU/UTP unscreened impedance 100 ΩGreyF/UTP screened impedance 100 ΩGrey1 516 40 Length 1 m1 516 41 Length 2 m1 516 42 Length 3 m1 516 43 Length 5 m(1) in metre(s)67

Legrand cabling system LCS 2category 5ezone distribution boxesNEWLegrand cabling system LCS 2category 5ecords specifically for zone distribution boxesfeedthrough sockets335 40515 03 786 25335 40 fitted with SC fibre optic unit, accessoryCat. No. 335 20 and a 6 x RJ 45 connector unitRJ 45 RJ 45Pack Cat.Nos Zone distribution boxesFor distribution of low current in a zone fitted with1 to 12 RJ 45 sockets Centralise connectionsto guarantee flexibility and adaptability of theinstallationInstalled on false ceiling or false floorConnect to the patch panel or the floor cabinetConnection to an RJ 45 socket with stripped cord orto a Mosaic RJ 45 socket with copper feedthroughwith an RJ 45/RJ 45 cordIP 21 - IK 07Conform to standards UTE C 15-900, NF C 15-100,NF C 20-730, EN 50-174.2, CEI 60950, ISO/IEC11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568Colour code and wiring schemes T 568 A and T 568 BCords and cables: ISO 11801 id.2.0, EN 50173-1,EIA/TIA 568Technical characteristics:- polycarbonate PC hood- polypropylene PP base- RAL 7035- holds connector units in place on the box: 100 N- Cables anchored on support using Colring cabletiesSelf-assembly zone distribution box1 335 40 Used for mounting LCS 2 RJ 45 connector blockscat. 5e (p. 66)Connection principlePack Cat.Nos Cords cat. 5e - RJ 45 / stripped444RJ 45 - straight stripped. Clip on and off in the zonedistribution boxes and RJ 45 socket connectionvia LCS 2 connector via the stripped side. Cordsprepared in factory, "ready for wiring". Conforms tostandards ISO/IEC 11801 Ed. 2.0, EN 50173-1 andEIA/TIA 568. Grey RAL 7035U/UTP unscreened impedance 100 Ω517 90 Length 8 m517 91 Length 15 m517 92 Length 20 mF/UTP screened impedance 100 Ω4 517 93 Length 8 m4 517 94 Length 15 m4 517 95 Length 20 mCords cat. 5e - RJ 45/RJ 45For direct connection via RJ 45 male plug to thezone distribution box and to the RJ 45 socket withcopper feedthrough to ensure:- safe connection- speed and reliability of connectionGrey RAL 7035U/UTP unscreened impedance 100 Ω4 515 00 Length 8 m4 515 01 Length 15 m4 515 02 Length 20 mF/UTP unscreened impedance 100 Ω4 515 03 Length 8 m4 515 04 Length 15 m4 515 05 Length 20 mSockets with copper feedthrough cat. 5eEasy connection at the rear through simply attachinga male plug. Ensures network access for the RJ 45socket. Used to create cat. 5e links. According tostandards ISO 11801 Ed.2, EN 50173-1 andEIA/TIA 568 within the framework of operation withzone distribution boxes. Multidirectional cord entry.Installation possible in all supports with a min.40 mm depth. 2 modulesCat. 5e UTPMosaic10 786 20 White10 786 24 AluminiumArteor10 5723 30 White10 5728 30 MagnesiumCat. 5e FTPMosaic10 786 21 White10 786 25 AluminiumArteor10 5723 32 White10 5728 32 Magnesium68

Legrand cabling system LCS 2category 5eRJ 45 socketsNEW765 52 794 55 695 57Sockets with LCS 2 connector with fast connection thanks to integrated crimpingTake AWG 22 single-core cables up to AWG 26 and AWG 26 multicore cablesContacts marked with dual colour code and wiring schemes T 568 A and T 568 BSide cable inlet for easy installation in all supportsConforms to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and EIA/TIA 568Pack Cat.Nos Mosaic RJ 45 sockets cat. 5eUTP - 1 module10 765 51 White10 794 51 AluminiumUTP - 2 modules10 765 54 White10 794 54 AluminiumUTP with controlled access - 2 modulesSupplied with 2 keys for 5 sockets5 765 97 White with red shutterUTP - 2 x RJ 45 with Soluclip accessory - 3 modulesFor snap-on mounting on DLP trunking with 45 mmcover5 765 41 WhiteUTP retractable RJ 45 socket - 4 modulesWith integrated retractable cord (0.9m)Winds up automatically with a pushbutton1 765 30 WhiteUTP 45° - 2 modules10 765 01 White2 x RJ 45 UTP 45° - 2 modules5 765 02 WhiteFTP - 1 module10 765 52 White10 794 52 AluminiumFTP - 2 modules10 765 55 White10 794 55 AluminiumPack Cat.Nos Arteor RJ 45 socket cat. 5eUTP - 1 module10 5723 03 White10 5728 03 MagnesiumUTP - 2 modules10 5723 04 White10 5728 04 MagnesiumFTP - 1 module10 5723 15 White10 5728 15 MagnesiumKeystone RJ 45 socket cat. 5e10 765 88 UTP socket connected with 110 toolPlexo RJ 45 sockets, cat. 5e -IP 55 closed flap IK 07Protection against water, dustFor industrial sites1/20 695 57 FTP socketGrey/White1/20 695 56 UTP socketGrey/White1 695 81 Adapter for RJ 45 socketEnsures weatherproofing (IP 44)with the plug insertedGrey/WhiteMosaic and Arteor sockets with copperfeedthrough (p. 68)FTP - 2 x RJ 45 with Soluclip accessory - 3 modulesFor snap-on mounting on Mosaic trunking with45 mm cover5 765 42 WhiteMosaic audio/video socketssee p. 8069

Legrand cabling system LCS 2LCS 2 system additional products cat. 6A, LCS 2 cat. 6, LCS 2 cat. 5eNEW335 39 335 34 335 12 335 16335 02 332 93335 01327 37Pack Cat.Nos Modular panelsPanels supplied with captive screws and cage nutsor with fast fixingUniversal mounting for all enclosures or cabinetsPanels ensure automatic earthing of each connectorFitted with rear cable guide to hold cables in placeduring maintenanceModular empty panels for up to 4 unitsTake the following equipment:- units of 6 x LCS 2 RJ 45 connectors- units for telephone inlets- fibre optic units- PoE injector units- video streaming units- switch units- telephone/Ethernet doubler units- copper/fibre optic converter units- blanking plates1 335 90 19" panel - 1 UDoubler unitsUnits of 6 x LCS 2 RJ 45 doubler connectors for fasttool-free connectionUsed with doubler sockets (p. 71)2 335 54 UTP unit2 335 55 FTP unit10 335 91 Blanking plate for 19" panel - BlackEthernet/Ethernet doublers 100 base T1 335 39 FTP - 9 contacts1 335 38 UTP - 8 contactsTelephone/Ethernet doublers 100 base T1 335 37 FTP - 9 contacts1 335 36 UTP - 8 contactsTelephone/telephone doubler1 335 35 45 contactsVideo streaming unit1 335 34 Block of 6 "F" connectors for video circuitsFibre optic unitsClip directly onto optic enclosureCat.No 335 10 (p. 76), on the patch panels with fibreoptic cassette Cat.No 335 11 (p. 76) or in the zonedistribution boxes with fibre optic accessoryCat.No 335 20 (p. 78)Monomode fibre units (9/125 μm)1 335 13 LC unit for 6 monomode fibres1 335 12 SC unit for 6 monomode fibresMultimode fibre units (62.5 and 50/125 μm)1 335 16 ST unit for 6 multimode fibres1 335 17 SC unit for 6 multimode fibres1 335 18 LC unit for 6 multimode fibres1 335 19 High-density LC unit for 12 multimode fibresPack Cat.Nos Blanking platesSet of 12 blanking plugs for RJ 45 LCS 2 connector10 517 40 White10 517 41 BlackBlanking plate for 19" panel10 335 91 BlackEthernet switches 100 MbpsMounted in the patch panelConform with standards IEEE 802-3,EN 500 81-1 and EN 500 82-1 (Conformity with EMCrequirements)Switch units for patch panelClip directly onto the patch panels1 335 02 7 RJ 45 ports at the front, 1 of which is a cascadeportPower supply with transformer provided1 335 05 6 RJ 45 ports + 1 LC type optic port with frontmountedcascade 100 base FX type LCPower supply via transformer providedBoxes to be installed on shelf1 332 93 5 RJ 45 port switchPower supply via transformer providedDimensions : 116 x 70 x 251 332 91 8 RJ 45 port switchPower supply via transformer providedDimensions : 171 x 98 x 29Mini shelf1 332 81 For switch Cat.Nos 332 91/93Dimensions: 220 x 220 x 43 mmFor horizontal, vertical or projecting mounting of theswitchSupplied with system for retaining the live productCopper/fibre optic converter unitsSimply and quickly permit copper to fibre conversionand vice versaClip directly onto the patch panelsFitted with an SC type fibre optic connector1 335 06 10/100 base T to 10/100 base FX type SC1 335 07 1000 base T to 1000 base SX type SCMidspan Power over Ethernet (PoE)injectors1 335 01 4 inlets/outletsUsed for supplying 4 Wi-Fi access pointsClips directly onto a patch panel1 327 37 1 inlet / outletUsed for supplying a Wi-Fi access pointDirect connection to the patch panel70

Legrand cabling system LCS 2doubler sockets and accessoriesNEWProtectionreinforced539 49533 00 in position(no cord supplied)533 01 327 60517 09Pack Cat.Nos RJ 45 doubler socketsMosaic Ethernet/Ethernet10 765 39 FTP - 9 contacts10 765 38 UTP - 8 contactsMosaic Telephone/Ethernet10 765 37 FTP - 9 contactsArteor10 5723 36 FTP - 9 contactsWhite10 5728 36 FTP - 9 contactsMagnesiumMosaic10 765 36 UTP - 8 contactsArteor10 5723 35 UTP - 8 contactsWhite10 5728 35 UTP - 8 contactsMagnesiumMosaic Telephone/telephone10 765 35 45 contactsMobile doublersClip into RJ 45 sockets to double applications10 327 83 TV/computer network or telephone doubleconnector10 327 47 Telephone/telephone doubler10 327 45 Computer network/telephone doubler10 327 46 L1/L2 telephone doubler10 327 48 Computer network/computer network doubleconnectorWeatherproof adaptorsIP 55 - IK 07Allows all functions to be adaptedGrey/White 2 Mosaic modules IP 55 operation10 695 80 Adapter with smoked flap1 695 79 Adapter with smoked flap lockable by special tool1 695 81 Adapter for RJ socket ensuring IP 44 waterproofnesscable already connected1 919 45 Locking tool (used for changing vandal-proofscrews)Soliroc adapterUsed for adapting all functions2 Mosaic modulesIK 10 - IP 551 778 80 Adapter with flap1 778 81 Adapter without flapHypra adapter5 539 49 IP 55 adapter basePack Cat.Nos Cable protection accessoriesPlastic materialIP 66/67 guaranteed connection with the pair 533 02IP 55 with no connection for base with shutterProtection for RJ 45 shielded or unshielded cablesensuring a link of category 5Conform to standards of the IEC 60603-7 series andto standard IEC 61076-3-106 (version 5)Compatible with products on the marketCompatible with products on the market conformingto the standards listedPlug3 533 00 Integrated PE with sealing ring and clamping bladesTool-free assemblyAbility to protect cables of category 5, 6 and 10 GbFlush-mounting base3 533 01 Locking baseSupplied with RJ 45 female / female coupler cat. 5Kit3 533 02 Flush-mounting base + plugProtective flap3 533 03 Fits on base Cat.No 533 01RJ plugs for round cablesGold coated contacts 1.2 μmRJ 1150 517 01 4 contacts, width 9.65 mmRJ 1250 517 02 6 contacts, width 9.65 mmRJ 45 cat. 5e50 517 03 8 contacts, width 11.70 mm50 517 04 9 contacts, width 11.70 mmRJ 45 sleeves50 517 06 Black50 517 07 WhiteStripping toolSlits the sheath and releases the conductors byrotationFor twisted pair cablesDoes not damage the conductorsStripper1 332 62 For twisted pair and fibre optic cableCutting pliers1 327 60 Cuts wires cleanly without damaging the copperCrimping tool for RJ 45 plugsUsed for crimping plugsRJ 4/6/8/9 contactsRatchet control of crimpingmechanismAble to cut and strip cables1 517 09 Tool with 3 crimping pointsHigh resistance steel material110 tool1 332 60 110 tool1 332 61 Replacement blade71

Legrand cabling system LCS 2telephone panels, units and cablesNEWLegrand cabling system LCS 2Wi-Fiswitches, distributors and Wi-Fi access points779 00335 79332 80Technical characteristics (p. 98)Pack Cat.Nos Patch panel telephone 50 ports 110 connect1 335 79 19" panel - 1 UCables for telephone networks cat. 3PVC sleeveColour whiteColour code EIA/TIAU/UTP - 50 pairs1 328 91 Length 500mSupplied on reelU/UTP - 100 pairs1 328 88 Length 500mSupplied on reelPanels and units for incoming telephonePanels assembled - 1 UFitted with 4 LCS 2 RJ 45units of 12 ports with fast tool-free connection1 335 31 3-6/4-5 contacts for digital telephone1 335 30 4-5/7-8 contacts for analogue telephoneIncoming telephone units for self-assemblypanelsFitted with 12 LCS 2 RJ 45 ports with fast tool-freeconnection2 335 33 3-6/4-5 contacts for digital telephone2 335 32 4-5/7-8 contacts for analogue telephonePack Cat.Nos Flush-mounting 10/100 base T switchesFor networking computer peripherals without a patchpanel: computers, printers, servers, etc.Possibility of extending an existing network bysimply replacing an RJ 45 socketTool-free connectionConform with standards IEEE 802.3 (Ethernet) andEN 500 81/82-2 (EMC requirements)Installation in all supports with minimum 40 mm depth6 ports at the front + 1 side RJ 45 connector forcabling and carrying out link testsPort status display integrated into the RJ 45 connectorsLabelling of each port from 1 to 6 and marker holderfor switch identification6 modulesMosaic Non-manageable1 779 01 PoE power supply (Power overEthernet - standard 802.3 af)1 779 00 230 VA power supplyArteor1 5720 84 PoE power supply (Power over Ethernet -standard 802.3 af)White1 5728 84 PoE power supply (Power over Ethernet -standard 802.3 af)Magnesium1 5720 83 230 VA power supplyWhite1 5728 83 230 VA power supplyMagnesiumMosaic1 779 20Manageable230 VA power supplyArteor1 5720 85 230 VA power supplyWhite1 5728 85 230 VA power supplyMagnesiumMosaic VDI distribution block withoutconnectors1 332 80 16 modulesDimensions: 135 x 223 x 57 mmFor small patch panelFor mounting a Mosaic switchCat.Nos 779 00/01/20RJ 45 Patch cords and user cords cat. 6(p. 61)rdon72

Legrand cabling system LCS 2Wi-Fiswitches, distributors and Wi-Fi access points (continued)779 14 779 13Pack Cat.Nos Manageable Wi-Fi access points 802.11a & b/gDual-band and dual-radio.Conform with standards 802.11a and 802.11b/gGross speed: 54 Mbps max. on each frequency(802.11a and 802.11g) simultaneouslyCan be installed in addition to a new or existingLCS/LCS 2 structured wiring system to meet mobileworking requirementsCan be integrated into all compatible supportswith minimum 40 mm depthTool-free network connection via RJ 45 connectorPoE power supply (Power over Ethernet - standard802.3 af)The installation must include at least:- Wi-Fi access point- a PoE injector conforming with 802.3 af (LCS 2 unitformat) to be installed in the patch panelThe management function allows the networkadministrator to manage Wi-Fi access pointsremotely via a web interfaceSecurity via WPA2 encryption (802.11i) and 802.1xauthenticationGuest access: allows visitors free access to theInternet (access independent of the main Wi-FiMosaic network). 4 modules1 779 14 With RJ 45 socket on frontWhite1 779 13 With no RJ 45 socketWhiteArteor1 5723 76 With RJ 45 socket on frontWhite1 5728 76 With RJ 45 socket on frontMagnesium1 5723 77 With no RJ 45 socketWhite1 5728 77 With no RJ 45 socketMagnesium1 5723 78 With no RJ 45 socketStandard 802.11 onlyWhite1 5728 78 With no RJ 45 socketStandard 802.11 onlyMagnesiumCeliane1 673 66 With RJ 45 socket on frontNEW

Noticed’utilisation / user guideLegrand cabling system LCS 2fibre opticfibre cablesNEWcustomisedfibre optic linksFIBRES PRE-FITTED WITH CONNECTORS325 15325 06Length of link(from connector to connector in metres)Link supplied with protective sleeveand compression gland pull system tofacilitate entry into the optic enclosuresConnectors:LCSC325 10Number offibres:4, 6, 12ST325 08Fibre cables: fibre colour code: FOTAG standard: EN 50173-2, ISO IEC 11801Pack Cat.Nos OS 1 singlemode optical cables(9/125 μm)For 9/125 μm singlemode installations900 μm (OS 1)Loose tube Tight tube Yellow jacket2000 (1) 325 12 Indoor/outdoor (universal)6 fibres2000 (1) 325 13 Outdoor, corrugated steel tape6 fibres2000 (1) 325 14 325 50 Indoor/outdoor (universal)12 fibres2000 (1) 325 15 Outdoor, corrugated steel tape12 fibres2000 (1) 325 51 Indoor/outdoor (universal) 24 fibresType of sheath:Internal/External(glass anti-rodent protection)External (structure can beburied, reinforced ringed-steelprotection)Fibre typeMultimode: 62.5/125 μmConforms with category OM1Multimode: 50/125 μm(ensured speed 1 Gbps)Conforms with category OM2Multimode: 50/125 μm(ensured speed 10 Gbps over 300m)Conforms with category OM3Monomode: 9/125 μm(ensured speed 10 Gbps)Conforms with category OS1OM 3 multimode optical cables(50/125 μm)For 50/125 μm multimode installations(OM 3)900 μm Green jacketLoose tube Tight tube 10 Gigabit Ethernet compliant2000 (1) 325 10 Indoor/outdoor (universal)6 fibres2000 (1) 325 11 Indoor/outdoor (universal)12 fibres2000 (1) 325 53 325 52 Indoor/outdoor (universal)24 fibresOM 2 multimode optical cables(50/125 μm)For 50/125 μm multimode installations900 μm (OM 2)Loose tube Tight tube Orange jacket2000 (1) 325 54 Indoor/outdoor (universal)2 fibres2000 (1) 325 59 325 55 Indoor/outdoor (universal)4 fibres2000 (1) 325 04 325 08 Indoor/outdoor (universal)6 fibres2000 (1) 325 05 Outdoor, corrugated steel tape6 fibres2000 (1) 325 06 325 09 Indoor/outdoor (universal)12 fibres2000 (1) 325 07 Outdoor, corrugated steel tape12 fibres2000 (1) 325 60 325 58 Indoor/outdoor (universal)24 fibresOM 1 multimode optical cables(62.5/125 μm)For 62.5/125 μm multimode installations(OM 1)900 μm Tight tube Orange jacket2000 (1) 325 00 Indoor/outdoor (universal)6 fibres2000 (1) 325 01 Indoor/outdoor (universal)12 fibresDOCUMENTSEach link is supplied with a test report (fibre by fibre) and illustratedoperating instructionsFeuille de Contrôle / Control sheetDate : / / Code :Type : / Lg : MInt : Ext : Int - ExtInt : Interieur / Interior Ext : Exterieur / Exterior0, dB0, dB dB 0, 0, dBdBdB0, dB dB 0, 0, dB0, dB 0, dBdB 0, dB0, dB 0, dB0, B0, dB 0, dB0, dB 0, dBdB 0, dB0, 0, dB 0, dB0, 0, 0, dB fibre / fiber : FO ~850 nmAmaximum ISO/CEI 11801 + TIA/EIA 568B3Ex. : lg 100m = 0,75. + (3,5 dB/km * 100)= 1,1dBTest TIA/EIA 455-171A méthode D1PACKAGINGAccording to length of link:- packedon a reel- packedon a ringConnector protection bytubeReel(1) in metre(s)74

Legrand cabling system LCS 2fibre opticcase and rapid crimping connectorsNEWLegrand cabling system LCS 2fibre opticMosaic glue-on connectors and sockets331 27331 00330 49Pack Cat.Nos Precision Fibre Optic Cleaver331 931 331 97 FO cleaverPigtails331 06 331 08331 10Installation and performance principles (p. 79)Pack Cat.Nos Rapid crimping connectors 900 μmPrepolished connectors with ceramic ferrule (UPC)Attenuation < 0.3 dBNo glue, polishing or current supply requiredUnlimited storage periodFor exclusive use with case Cat.No 331 93Monomode connectors10 331 12 LC connector for 9/125 μm fibre10 331 13 SC connector for 9/125 μm fibreMultimode connectors10 331 06 LC 10 Gb connector for 50/125 μm10 331 07 LC 10 Gb connector for 50/125 μm10 331 08 ST 10 Gb connector for 50/125 μm10 331 09 LC connector for 62.5/125 μm fibre10 331 10 SC connector for 62.5/125 μm fibre10 331 11 ST connector for 62.5/125 μm fibreSupplied with 900 μm sleeve, 1 m10 Gb - 50/125 μm1 326 22 SC connector1 326 23 LC connector1 326 27 6 x LC-PC connectors1 326 26 12 x LC-PC connectors9/125 μm1 326 20 SC connector1 326 21 LC connector1 326 25 6 x LC-UPC connectors1 326 24 12 x LC-UPC connectorsThermoretractable sleeve for pigtails1 327 44 40 mm - pack of 50 sleevesGlue-on connectors 50/125 and 62.5/125 μmSupplied with sleeve 900 μmConnectors with ceramic ferruleTypical attenuation: 0.3 dB10 331 27 ST connector10 331 47 SC connector10 331 00 LC connectorBreakout kitsFor 900 μm of optical fibresTake 250 μm fibre diameters1 330 48 6 fibre breakout kit1 330 49 12 fibre breakout kitInstallation case for rapid crimpingconnector1 331 93 Used for quick and simple installation of ST, SC orLC fibre connectorsComplete kit supplied with:- installation instructions and video- stripping tool (for fibres and cables)- cleaving tool- microscope for checking the quality of the cut- crimping tool- accessories (scissors, marker, wipes)75

Legrand cabling system LCS 2fibre optic19" optic drawersNEW"Tail-coat" enclosure rearfor easier cable entry335 10 fitted with fibre optic units335 13 335 12335 16335 11 fitted with fibre optic unit 335 17Pack Cat.Nos 19" optic drawer1 335 10 Modular optic drawerSlide-in and modular drawerLimit switch stop with 45° slopeMaximum capacity:- 24 x ST and SC connectors ST- 48 x LC connectorsDepth 220 mm, height 1 USupplied with screws and wiring accessoriesTakes up to 4 fibre optic units (see below)Pack Cat.Nos Fibre optic cassette for patch panel1 335 11 Ensures fibre coiling (from 2 to 12 fibres)Takes a fibre optic unitCat.Nos 335 12/13/16/17/18/19Used for linking copper and fibre optic blocks on thesame LCS 2 patch panelBlanking plate for 19" panel10 335 91 BlackFibre optic unitsClip directly onto the optic drawerCat.No 335 10 or on the patch panels with fibre opticcassette Cat.No 335 11Singlemode fibre units (9/125 μm)1 335 13 LC unit for 6 singlemode fibres1 335 12 SC unit for 6 singlemode fibresMultimode fibre units (62.5 and 50/125 μm)1 335 16 ST unit for 6 multimode fibres1 335 17 SC unit for 6 multimode fibres1 335 18 LC unit for 6 multimode fibres1 335 19 High-density LC unit for 12 multimode fibresSwitch/fibre optic unitClips directly onto the patch panels1 335 05 6 x RJ 45 ports + 1 cascade LC type optic port atthe frontPower supply via transformer providedCopper/fibre optic converter unitsFor simply and fast copper to fibre conversion andvice versaClip directly onto the patch panelsFitted with an SC type fibre optic connector1 335 06 10/100 base T to 10/100 base FX type SC1 335 07 1000 base T to 1000 base SX type SC76

Legrand cabling system LCS 2fibre optic19" high density optic drawerNEWLegrand cabling system LCS 2fibre opticfibre sockets786 16786 17325 69Pack Cat.Nos 19" high density optic drawer1 325 69 Modular optical drawerSlide-in and modular drawerMaximum capacity:- 36 ST and SC connectors- 72 LC connectorsDepth 220 mm, height 1 USupplied with screws and wiring accessoriesReceives up to 3 fibre optic units belowFibre optic unitsClip directly onto the optic drawerCat.No 325 69Singlemode fibre units (9/125 μm)1 325 73 LC duplex unit for 6 singlemode fibres - blue1 325 74 LC duplex unit for 12 singlemode fibres - blue1 325 70 ST duplex unit for 6 singlemode fibres - blue1 325 71 SC duplex unit for 6 singlemode fibres - blue1 325 72 MPO unit type A for 6 singlemode fibres - blueMultimode fibre units (62.5 and 50/125 μm)1 325 78 LC duplex unit for 6 multimode fibres - beige1 325 79 LC duplex unit for 12 multimode fibres - beige1 325 75 ST duplex unit for 6 multimode fibres - beige1 325 76 SC duplex unit for 6 multimode fibres - beige1 325 77 MPO unit type A for 6 multimode fibres - beige786 18Pack Cat.Nos Fibre socketsFitted with duplex feedthrough 2 inlets 2 outletsUsed for connecting 2 fibres (fitted with theirconnector)Supplied with protective capsFitted with transparent marker holder2 modulesSocket with fibre optic feedthrough 2 x STBayonet connection (STII compatible)1 786 16 WhiteSocket with fibre optic feedthrough 2 x SCPush-pull connection1 786 17 WhiteSocket with fibre optic feedthrough 2 x LCPush-pull connection1 786 18 WhiteAccessory1 335 93 Blanking plateAccessories common to 2 optical drawersCassette for pigtails1 329 07 12 fibre capacityBend limiting clip8 335 94 Fibre management bend limiting clip77

Legrand cabling system LCS 2fibre opticzone distribution boxesNEWLegrand cabling system LCS 2fibre opticPatch cords335 40335 20 accessoirefibre optique326 01 326 07786 16Pack Cat.Nos Zone distribution boxes326 16 326 13For distribution of low current in a zone fitted with1 to 12 RJ 45 sockets Centralise connectionsto guarantee flexibility and adaptability of theinstallationInstalled on false ceiling or false floorConnect to the patch panel or the floor cabinetConform to standards UTE C 15-900, NF C 15-100,NF C 20-730, EN 50-174.2, CEI 60950, ISO/IEC11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568Colour code and wiring schemes T 568 A and T 568 BCords and cables: ISO 11801 id.2.0, EN 50173-1,EIA/TIA 568Technical characteristics:- polycarbonate PC hood- polypropylene PP base- RAL 7035- holds connector units in place on the box: 100 N- Cables anchored on support using Colring cabletiesSelf-assembly zone distribution box1 335 40 Used for fitting fibre optic accessory unitsFibre optic accessory1 335 20 Used for fitting fibre optic units (see p. 74) and thefibre coil in the zone distribution boxSockets with fibre optic feedthroughFitted with duplex feedthrough 2 inlets / 2 outletsUsed for connecting 2 fibres (fitted with theirconnector)Supplied with protective capsFitted with transparent marker holder2 modulesSocket with fibre optic feedthrough 2 x STBayonet connection (STII compatible)1 786 16 WhiteSocket with fibre optic feedthrough 2 x SCPush-pull connection1 786 17 WhiteSocket with fibre optic feedthrough 2 x LCPush-pull connection1 786 18 WhiteTechnical characteristics (p. 79)Fitted with 2 connectors with ceramic ferrule at either endPacked and tested singly (report supplied)Zipcord LSZH sleevePack Cat.Nos OS 1 (UPC) monomode optical cordsMax. optical losses: 0.3 dBFor OS1 9/125 μm monomode installations, OS 1typeYellow sheathsSC/SC duplex cords3 326 00 Length: 1 m3 326 01 Length: 2 m3 326 02 Length: 3 mSC/LC duplex cords3 326 03 Length: 1 m3 326 04 Length: 2 m3 326 05 Length: 3 mLC/LC duplex cords3 326 06 Length: 1 m3 326 07 Length: 2 m3 326 08 Length: 3 mOM 3 (PC) multimode optical cords(50/125 μm)Suitable for 10 Gb Ethernet networkMax. optical losses: 0.3 dBFor 50/125 μm multimode installations, OM 3 typePurple sheathsSC/SC duplex cords3 326 09 Length: 1 m3 326 10 Length: 2 m3 326 11 Length: 3 mSC/LC duplex cords3 326 12 Length: 1 m3 326 13 Length: 2 m3 326 14 Length: 3 mLC/LC duplex cords3 326 15 Length: 1 m3 326 16 Length: 2 m3 326 17 Length: 3 m78

Legrand cabling system LCS 2fibre opticPatch cordsNEWLegrand cabling system LCS 2fibre optic330 70 Fast crimping with kit Cat.No 331 93Types of connector- ST connector: Helical shapelocked by "push and turn" bayonet typeconnector- SC connector: Rectangular shape"push-pull" latch type locking.Suitable for a large numberof active devicesRecommended in the generic standardsISO/IEC 11801 and EN 50173330 65- LC connector: Rectangular shapetab lockingHalf the size of aconventional connectorThe 6 essential steps for fast crimpingPack Cat.Nos OM 2 (UPC) multimode optical cords(50/125 μm)Max. optical losses: 0.3 dBFor 50/125 μm multimode installations, OM 2 typeOrange sheathsST/ST duplex cords3 330 80 Length: 1 m3 330 81 Length: 2 m3 330 82 Length: 3 mSC/SC duplex cords3 330 69 Length: 1 m3 330 70 Length: 2 m3 330 71 Length: 3 mST/SC duplex cords3 330 72 Length: 2 m3 330 73 Length: 3 mLC/LC duplex cord3 330 61 Length: 2 mSC/LC duplex cords3 330 75 Length: 1 m3 330 63 Length: 2 m3 330 76 Length: 3 mLC/ST duplex cord3 330 65 Length: 2 mStep 1: Strip the fibreStep 3: Inspect the fibreStep 5: Align the fibreStep 2: Cleave the fibreStep 4: Insert the fibreStep 6: Crimp the connectorOM 1 (UPC) multimode optical cords(62.5/125 μm)Max. optical losses: 0.3 dBFor 62.5/125 μm multimode installations, OM 1 typeOrange sheathsSC/SC duplex patch cords3 331 51 Length: 1 m3 331 52 Length: 2 m3 331 53 Length: 3 mST/SC duplex patch cords3 331 57 Length: 1 m3 331 58 Length: 2 mLC/SC duplex patch cords3 330 77 Length: 1 m3 330 62 Length: 2 m3 330 78 Length: 3 mCustomised fibre opticsTechnical characteristics- The kit is used for attaching the connectors to 900 μm fibre- Average loss of a connection: 0.3 dB- Ideal for high-speed systems: 10 Gb Ethernet supplied with50/125 μm connector- Operating temperature: from 0°C to 65°CAdvantages:- High quality finish- No polishing: connectors pre-polished in factory- No Epoxy type glue required- Easy connection- No complex tools or consumables required: the terminationis made in less than 3 minutes and is very cost-effective- Practical, lightweight kit- Both multimode and singlemode fibres can be crimped(50/125 μm and 62.5/125 μm)customised solutions p. 7479

Legrand cabling system LCS 2Mosaic TM mechanismsaudio and video socketsNEW787 71 787 72 787 74787 73787 70Pack Cat.Nos DVI-I socketUsed to transmit High-Definition digital andanalogue video streams between a source(computer) and a compatible receiverWhite (plasma, LCD, video projector, etc)1 787 71 DVI-I plug2 modulesFemale HD15 socketsWhite Alumin.For streaming of analogue video between asource (computer) and compatible receiver(plasma, LCD, video projector, etc.)VGA, XGA, VXGA definition according tothe computer graphic cardFemale HD15 sockets1 787 72 1 moduleConnection by welded connectionblock1 787 57 792 57 2 modulesConnection by screw onconnection blockFemale HD15 socket + 3.5 mm Jack1 787 74 2 modulesConnection by screw onconnection blockFemale HD15 socket + 5 preconnectedBNC sockets RGBHV1 787 59 VGA adaptor, female HD15base to 5 female BNCsockets 75 ΩJack plugs 3.5 mmWhite Alumin.3.5 mm jack connectors can be used tocreate audio/video links from a portablesource1 787 64 792 64 Female 3.5 mm jack plug 1 moduleConnection by screw on connectionblock1 787 73 Welded 3.5 mm Jack socket 1 moduleConnection by welded connectionblockHD15 amplifier kit + 3.5 mm JackUsed to connect audio/video terminals at adistance of more than 20 mThe video link is via an HD 15 connector(resolution up to UXGA)White The stereo audio link via a 3.5 mm jack1 787 70 The kit comprises:- 1 x 4-module transmitterequipped with an HD15connector and a 3.5 mm jack- 1 x 4-module receiverequipped with an HD15connector and a 3.5 mm jack- 1 x 4-module power supplyto be connected to the mainsand then to the receiver ortransmitterThe link between the transmitter andreceiver is via a network cable cat. 6(Cat.Nos 327 56). Transmitter and receiverare supplied with an RJ 45 LCS² jack fortool-free connectionPack Cat.Nos Other audio and video socketsWhite Alumin. HDMI type A sockets1 787 68 792 75 2-gangUsed to transmit high-definitiondigital audio/video streamsbetween a source(HD-DVD drive, computer, etc) and acompatible receiver (plasma, LCD, etc)YUV socket1 787 69 1 module. Provides the high definitionanalogue video link for a DVD, PCmonitor, plasma screen, etcFemale 1 RCA socket1 787 52 1 module. Provides the compositevideo link for any peripheral devicesuch as a camera, DVD player, videorecorder, etcFemale 2 RCA socket1 787 53 1 module. Provides the video linkfor any peripheral device such as acamera, DVD player, video recorder,etcFemale 3 RCA socket1 787 54 792 54 1 module. Provides the compositevideo and stereo audio link for anyperipheral device such as a DVDplayer, camera, video recorder,videoconferencing, etcFemale BNC 75 socket1 787 58 1-gangProvides the composite video link forany peripheral device such as a DVDdrive, camera, video recorder, etcS-Video socket (4-pin mini-DIN)1 787 63 1-gangProvides the YC video link for anyperipheral device such as a DVDdrive, camera, video recorder,videoconferencing, etcCordsHDMI cord1 517 20 Length 10 m. Allows an HDMI plug to beconnected to an audio/video terminal(plasma screen, DVD player, etc.)HDMI booster should be used if more than10 m is required Cat.No 779 30HD15 cord + 3.5 mm Jack1 517 22 Length 2 mFor connecting an HD 15 video socket anda 3.5 mm audio jack to a terminal(PC, video projector)HDMI booster1 779 30 Enables an HDMI link to be extendedConsists of 2 female connectors and usedin addition to an HDMI cord (for examplecord Cat.No 517 20)Does not need an external power supplyCablesHDMI cables1 327 80 Length 20 mFor connecting HDMI sockets at a distanceof up to 10 mVGA cables1 327 81 Length 20 mFor full pin connection of HD15 plugs80

Legrand cabling system LCS 2adaptersNEWLegrand cabling system LCS2audio and video sockets Conference room787 64787 57771 11695 80 539 49770 26327 60517 09Pack Cat.Nos Weatherproof adaptorsIP 55 - IK 07Allows all functions to be adaptedGrey/White 2 Mosaic modules for IP 55 operation10 695 80 Adapter with smoked flap1 695 79 Adapter with smoked flap lockable by special tool1 695 81 Adapter for RJ socket ensuring IP 44 waterproofnesscable already connected1 919 45 Locking tool (used for changing vandal-proofscrews)Soliroc adapterUsed for adapting all functions2 Mosaic modulesIK 10 - IP 551 778 80 Adapter with flap1 778 81 Adapter without flapHypra adapter5 539 49 IP 55 adapter baseRJ plugs for round cablesContacts with gold coating 1.2 μmRJ 1150 517 01 4 contacts, width 9.65 mmRJ 1250 517 02 6 contacts, width 9.65 mmRJ 45 cat. 5e50 517 03 8 contacts, width 11.70 mm50 517 04 9 contacts, width 11.70 mmRJ 45 sleeves50 517 06 Black50 517 07 WhiteStripping toolSlits the sheath and releases the conductorsby rotationFor twisted pair cablesDoes not damage the conductorsStripper1 332 62 For twisted pairand fibre optic cableCutting pliers1 327 60 Cuts wires cleanly without damaging the copperCrimping tool for RJ 45 plugsUsed for crimping plugsRJ 4/6/8/9 contactsRatchet control of crimpingmechanism. Able to cut andstrip cables1 517 09 Tool with 3 crimping pointsHigh resistance steel materialXGA cable (Cat.No 327 81)HD15 cord + 3.5 mm jack (Cat.No 517 22)Audio coaxial cableVideo streaming with HD15 and/or DVI socketsAudio streaming with Jack 3.5 socketsStandard installationXGA analogue quality video 1280 x 720 pixelsHD15 Socketref. 787 57Jack SocketRef. 787 64For management of existing PCsHigh definition installationHD digital quality video 1920 x 1080 pixelsDVi-I Socketref. 787 71HD15 Socketref. 787 57Jack SocketRef. 787 64DVi-I Socketref. 787 71HD15 Socketref. 787 57Jack SocketRef. 787 64HD15 Socketref. 787 57Jack SocketRef. 787 64787 64787 57771 11Add a DVI link cable to the standard installation for management ofnew PCs81

customised19" LCS2 cabinets and enclosuresLegrand cabling system LCS 219" LCS² server enclosuresNEW19" LCS 2 CABINETSNo sidepanelsCable entry plate withbrushes (1)Thermal management(fan, thermostat)Other colour, 180 RALFixed orpivotingSolid metal door,opening to theleft,no doorFixed shelves,modular patch panel 1 U andfeedthrough, blanking plates,DIN rail kit IP2X, modular opticalenclosureEarthing wirePower supply unitOther keycodes(1) Pivoting cabinets19" LCS 2 ENCLOSURES30 SIZESCapacity 24 U 29 U 33 U 42 U 47 UWidthDepthENCOLSURE DEFINITIONThermal management: plate with230 V fans, thermostatRear doorOther key codesServer enclosureNo panels19" cable entries:metal or plasticBase, ventilation/brush trap(1) Supplied ready for assemblyOUR COMMITMENTQuotationprovidedwithin24hoursEarthing wire/braidWiring management: verticalbrush panels, patch extension,supports, guardsDeliveryfrom24 days*600 or 800 mm600, 800 or 1,000 mmLighting kit (1)Level adjustment kit (1)or ground fixing kit (1)Option of solid or micro perforated metal doors, screen printglass doors, double doors or no doorAssembling 19" equipment180 RAL colours availableContact us for adviceRequest a quotation with theconfigurator under "CustomisedSolutions" at www.legrand.country463 85Technical characteristics (p. 90)IP 20 - IK 08Enclosures with front and rear metal micro perforated door, can be openedwithout keyFront door can be fitted with a DIN European cylinder (30 + 10 mm) withoption of fitting a handle Cat.No 347 71/72 (see Legrand general catalogue)Rear door can be fitted with a key barrel Cat.No 368 xx (see Legrandgeneral catalogue)Removable side panelsLevelling feet adjustable from the insideTop cable entries in 19" cut-out format, capable of taking 19" plates withbrushes, fans, etc.Open bottom cable entriesSupplied with 4 x 19" uprights with marking of the U and depth adjustmentEnclosures can be dismantled completely where access is difficultEnclosures can be jointed with kit Cat.No 463 39Supplied with earthing kitCharcoal grey RAL 7016Pack Cat.Nos Server enclosuresCapacity Height (mm) Width (mm) Depth (mm)Loadcapacity (kg)1 463 85 42 U 2026 600 1000 6301 463 86 42 U 2026 800 1000 630AccessoriesSet of 4 caster wheels1 464 82 Set of 4 caster wheels for server cabinetLoad on the 4 wheels: 500 kgShelvesScrew-fixing on 4 x 19" uprightsFor enclosure depth 1000 mm1 465 17 Fixed shelf depth 850 mm, max. load 100 kg1 465 18 Telescopic shelf depth 850 mm, max. load 100 kgCable guide supportsFast screw-free assembly of cable guides (p. 87)1 464 78 For width 600/800 mmFitted between 2 supports Cat.No 464 791 464 79 For depth 1000 mmPre-cut every 100 mm for height 500 to 200 mmEarth strapCapacity (mm²) Fixing spacing (mm) Ø of holes (mm)20 347 95 6 200 8,5Bases, cable inlet plates, thermalmanagement, other accessories (p. 84)19" equipment, cable management (p. 86)82

Legrand cabling system LCS 219" LCS 2 enclosuresenclosures and cabling unitsNEWLegrand cabling system LCS 2Linkeo 19" LCS 2 enclosuresenclosures and cabling units463 18463 34 + 1 enclosure 463 18+ 1 extension enclosure 463 30463 58 + additional 19" uprights Cat.No 463 73Technical characteristics (p. 90) Technical characteristics (p. 90)IP 20 - IK 08 Enclosures with reversible curved front door made ofscreen-printed safety glass. Side and rear removable panels Panels withautomatic equipotential connection. Lock with 2433 A key for locking ofthe 4 sides. Levelling feet adjustable from the inside. Top and bottomcable entries, 19" cut-out format, receive 19" plates with brushes, fans,etc.Supplied with 4 x 19" uprights with marking of the U and depthadjustment. Option of cable and patch cord management in cabling unitCat.Nos 463 34/35. Enclosures can be dismantled completely whereaccess is difficult. EnclosurescanbelinkedwithkitCat.Nos46337/38/39Charcoal grey RAL 7016Pack Cat.Nos 19" LCS 2 enclosuresLoadcapacity (kg)Capacity Height (mm) Width (mm) Depth (mm)1 463 00 24 U 1226 600 600 2401 463 06 29 U 1448 600 600 2901 463 12 33 U 1626 600 600 3301 463 18 42 U 2026 600 600 4201 463 19 42 U 2026 600 800 4201 463 21 42 U 2026 800 600 4201 463 22 42 U 2026 800 800 4201 463 23 42 U 2026 800 1000 4201 463 28 47 U 2248 800 800 4701 463 29 47 U 2248 800 1000 47019" LCS 2 extension enclosuresNo side panelsSupplied with joining kitCapacity Height (mm) Width (mm) Depth (mm)Loadcapacity (kg)1 463 30 42 U 2026 600 600 4201 463 33 42 U 2026 800 800 420LCS 2 cabling unitsCan be attached to LCS 2 42 U enclosuresEasier cable and patch cord managementWidth 250 mmCharcoal grey RAL 7016For enclosure depth (mm):1 463 34 6001 463 35 800LCS 2 joining kitsFor linking 2 LCS 2 enclosuresFor enclosure depth (mm):1 463 37 6001 463 38 8001 463 39 1000IP 20 - IK 08 Enclosures with reversible front door made of screenprintedsafety glass. Removable side and rear panelsPanels with automatic equipotential connection 2433 A key for locking ofthe 4 sidesLevelling feet adjustable from the inside2 top and bottom cable inlets, 19" cut-out format, receive 19" plates withbrushes, fans, etc.Supplied with 2 x 19" uprights with marking of the U and depthadjustment. Option of cable and patch cord management in cabling unitCat.Nos 463 75/76Enclosures can be dismantled completely where access is difficultEnclosures can be linked with kit Cat.Nos 463 78/79Grey RAL 7035Pack Cat.Nos Linkeo 19" LCS 2 enclosuresCapacityHeight(mm)Width(mm)Depth(mm)Loadcapacity (kg)1 463 52 33 U 1626 600 600 3301 463 58 42 U 2026 600 600 4201 463 59 42 U 2026 600 800 4201 463 60 42 U 2026 800 600 4201 463 61 42 U 2026 800 800 420Linkeo 19" LCS 2 extension enclosuresNo side panelsSupplied with joining kitCapacityHeight(mm)Width(mm)Depth(mm)1 463 81 42 U 2026 600 600 4201 463 84 42 U 2026 800 800 420Loadcapacity (kg)Linkeo LCS 2 cabling unitsCan be attached to Linkeo LCS 2 42 U enclosuresEasier cable and patch cord managementWidth 250 mmGrey RAL 7035For enclosure depth (mm):1 463 75 6001 463 76 800Linkeo LCS 2 joining kitsFor linking 2 Linkeo LCS 2 enclosuresFor enclosure depth (mm):1 463 78 6001 463 79 800Linkeo 19" LCS 2 uprightsSet of 2 additional 19" uprights1 463 72 33 U1 463 73 42 U83

Legrand cabling system LCS 2enclosure plinthsNEWLegrand cabling system LCS 2cable entries and thermal managementfor enclosures464 61Stay plate 476 93with cable guide464 63465 29465 32Kit 464 52 consisting of 4 corner blocksand solid traps at front/rear464 66465 38Technical characteristics (p. 91)Pack Cat.Nos Enclosure plinthsOpen on 4 sidesCharcoal grey RAL 7016Plinth kitsHeight 100 Height 200Consisting of 4 corner blocks and plaintraps at front / rearSide traps to be ordered separatelyFor enclosure width (mm):1 464 50 464 52 6001 464 51 464 53 800Sets of 2 plain side trapsTraps height 100 mmOrder 2 sets for a plinth height of 200 mm(Cat.Nos 464 52/53)For enclosure depth (mm):1 464 54 6001 464 56 8001 464 58 1000Ventilated traps1 trap height 100 mmFor enclosure width/depth (mm):1 464 60 6001 464 61 800Traps with brush1 trap height 100 mmFor enclosure width/depth (mm):1 464 62 6001 464 63 800Plinth for cabling units1 464 64 Assembled at front and/or rear betweenthe bases of associated enclosuresTrap height 100 mm. Double the number oftraps for a height of 200 mmCharcoal grey RAL 7016Cross barFixed between 2 corner blocks of the plinthFor fixing cable trays crossing 2 associatedcabinetsFor enclosure depth (mm):1 476 93 6001 476 94 8001 476 95 1000Technical characteristics (p. 91)Pack Cat.Nos 19" cable entry plates19" cable entry plates for enclosuresBlack RAL 9005Plastic with brushes, direct clipping1 465 28 1 U1 465 29 2 USolid plastic, direct clipping1 465 32 1 U1 465 33 2 UMetal with brushes, quick-fixing1 465 30 1 U1 465 31 2 USolid metal, quick-fixing1 465 38 1 U1 465 39 2 U1 465 40 3 UThermal management19" 3 U plates with fansFixed to the enclosure 19" cable inletsor on 19" uprights1 464 87 2 x 230 VA fans1 464 88 3 x 230 VA fans1 U ventilation drawersFor circulation of internal airFit onto 2 x 19" uprightsOn/off switch1 464 89 19" Ventilation shelf with 2 fans - depth 150 mm1 464 90 19" Ventilation shelf with 4 fans - depth 300 mmThermostat1 348 48 Adjustable from 5 to 60 °C, 12 V to 250 VANO contact (10 A) and NC contact (5 A)Fixed by magnetLinking interfaceProtection allowing enclosure base andcable duct to be linkedSupplied with weatherproof brushReversible cover with cut-outs ensuring ahigh-quality finishHeight 200 mmCharcoal grey RAL 70161 464 66 For enclosure depth 600 mm84

Legrand cabling system LCS 2accessories and document holdersfor enclosuresNEWLegrand cabling system LCS 2Altis enclosures365 81 365 82Pack Cat.Nos Accessories1 464 83 Set of 4 caster wheels for LCS 2 enclosure (excludesserver enclosure)Maximum permissible load on the 4 casters: 380 kg1 464 85 Lighting kit with switchSupplied with 230 VA - 8 W fluorescent tubeFixing 19" - 1 U1 464 84 Anti-tilt kitStabilises the enclosure whenextracting heavy products (servers)1 464 86 Floor fixing kitEnables a enclosure to be fixedpermanently into the groundSelf-adhesive document holders for plansOpen - RAL 7035Ext. dimensionsInt. dimensionsHeight (mm) Width (mm) Height (mm) Width (mm) Depth (mm)20 365 80 235 340 200 310 1820 365 81 165 260 130 230 18Closed - RAL 90021 365 82 Hard, plastic, IP 50Int. dimensions: 324 x 120 x 18 mmTransparent10 097 99 Soft plastic, A4 - 305 x 220 mm473 62 + 472 72 + 482 20 473 63 equippedTechnical characteristics (please refer to Legrand catalogue 2010)Pack Cat.Nos 19" 42UAltis enclosuresProtection against dust, water, knocks in demandingenvironments - IP55 - IK10For loads up to 720 kgReversible door4-point locking with double bar (barrels: please referto Legrand catalogue 2010)Removable rear panelCable entries at bottom19" uprights and side panels to be orderedseparatelyCompatible with 19" LCS² equipmentCat.Nos 331 35 and 464 80 (see p. 87)Grey RAL 7035Enclosures with framed glass doorColoured toughened glassDimensionsWindow dim.Height(mm)Width(mm)Depth(mm)Height(mm)Width(mm)Weight(kg)1 473 62 2000 600 600 1775 375 91.71 473 63 2000 800 600 1775 575 110.41 473 91 2000 600 800 1775 375 95.21 473 92 2000 800 800 1775 575 114.6Set of 2 side panelsFor enclosuresHeight(mm)Depth(mm)1 472 72 2000 6001 472 75 2000 80019" uprights1 482 20 Set of 2 42 U uprights (perforations 9.5 x 9.5 mm)Supplied with mounting lugs and screwsMounting in enclosures possible width 600 or800 mmInterior assembly kit - IP 55for a 1000 kg/m 3 load1 476 83 Set consisting of- 4 brackets- 2 joining feet- 1 gasketM 14 lifting rings1 476 96 Set of 4 ringsFor a load of 1000 kg/m³Plinths for Altis enclosures(please refer to Legrand catalogue 2010)Cable entry plates for Altis enclosures(please refer to Legrand catalogue 2010)Ventilation drawers (p. 84)85

Legrand cabling system LCS 219" LCS 2 equipmentfor enclosures and AltisNEW465 01465 06 465 09465 11465 50Pack Cat.Nos Fixed shelves332 78 465 45Pack Cat.Nos 230 VA power supply unitsBlack RAL 9005Quick fixing on 2 x 19" uprightsScrew-free mountingMax. load 15 kgHeight 2 U1 465 00 Depth 115 mm1 465 01 Depth 200 mm1 465 02 Depth 360 mmQuick fixing on 4 x 19" uprightsFits exclusively on LCS 2 enclosures (except serverenclosures)Max. load 50 kg1 465 05 Depth 450 mmFor enclosure depth 600 mm1 465 06 Depth 650 mmFor enclosure depth 800 mm1 465 07 Depth 850 mmFor enclosure depth 1000 mmScrew fixed on 4 x 19" uprightsFits on all enclosuresMax. load 100 kg1 465 17 Depth 850 mmFor enclosure depth 1000 mmTelescopic shelvesBlack RAL 9005Quick fixing on 4 x 19" uprightsFits exclusively on LCS 2 enclosures (except serverenclosures)Max. load 50 kg1 465 08 Depth 450 mmFor enclosure depth 600 mm1 465 09 Depth 650 mmFor enclosure depth 800 mm1 465 10 Depth 650 mmFor enclosure depth 1000 mmScrew fixed on 4 x 19" uprightsFits on all enclosuresMax. load 100 kg1 465 18 Depth 850 mmFor enclosure depth 1000 mmSliding railsSet of 2 fixed bracketsFit onto 4 x 19" uprightsMax. load: 50 kg1 465 11 For enclosure depth 600 mm1 465 12 For enclosure depth 800 mm1 465 13 For enclosure depth 1000 mmKeyboard shelf1 465 19 Screw fixed on 4 x 19" uprightsFor enclosure depth ≥ 800 mmMax. load 50 kgAccommodates:- a computer screen- a keypad on the retractable support- a mouse on a sliding shelf with integrated matArea for mouse or CD. Black RAL 9005Reversible front, rear and side mounting on 19"uprightsConnection by 2.5 mm 2 terminal blockProvide a 2 U spaceSupplied with screwsSocket units1 465 50 9 x 2P+E black sockets1 465 54 6 x 2P+E black sockets1 332 88 6 x 2P+E white sockets with switch with indicator1 332 37 6 x 2P+E white sockets + 16 A double-pole circuitbreaker1 332 87 6 x 2 P + E tamperproof sockets for uninterruptiblepower supply (UPS)1 465 60 19" power supply unit 9 sockets 2P+E Schuko1 465 62 19" power supply unit 6 sockets 2P+E SchukoVoltage surge protector unit1 332 78 6 x white 2P+E sockets + surge protector and switchwith indicatorMaintains sockets energized after a mainsovervoltage or lightning strikeInterchangeable surge suppressor moduleEnsures continuity of serviceReplacement module for surge suppressor1 775 41 For replacing the module after useModular unit1 332 79 Takes 16 Mosaic modulesDINrail kitIP2X1 465 45 For Lexic modular appliancesFits directly onto 19" uprightsCapable of taking up to 7 x Mosaic 2P+E sockets atthe rearComposed of:- metal box- 3 x DIN profile rails4 modules- terminal block forprotection conductors- a 2 U faceplate- 3 blanking plates- 9 cable entry glandsHeight 2 UBlack RAL 9005Compatible with EMC requirements10" LCS 2 cabinetssee p. 8986

Legrand cabling system LCS 2LCS 2 cable managementNEW465 32465 38464 80 464 81331 35Pack Cat.Nos Enclosure cable and patch cord managementSet of 3 cable management supportsFixing on structureFast assembly of cable trays without screws1 464 72 For enclosure width/depth 600 mmFixing centre: 508 mm1 464 73 For enclosure width/depth 800 mmFixing centre: 708 mm1 464 74 For enclosure depth 1000 mmFixing centre: 908 mmFlat cable traysFast mounting on the supportswithout screws. 250 mm width1 464 76 For 33 U enclosures1 464 77 For 42 U enclosuresCable traysFor ducting cables can be fixed ;in plinth with 476 93/94/95 on top ofserver cabinet 464 78/79 inside thecabinet 464 72/73/741 464 69 3000 x 200 x 54 mm1 464 70 3000 x 400 x 54 mmCable management grilleFor 42 U enclosures,width 800 mmFits onto 19" uprights1 331 35 (1) Guard with articulated boltsDimensions : 1560 x 100 x 150 mmVertical cable managerFor 42 U enclosures, width 800 mmFits onto 19" uprights1 464 80 (1) Set of 2 vertical panels with brush feed throughSupplied with 10 cable management ringsCat.No 465 42, 3 cable ties Cat.No 331 94, 3 cable tiesCat.No 331 95 and 3 cable ties Cat.No 331 96Black RAL 9005Self-locking cable ties and tighteningindicator (see Legrand catalogue)(1)Can also be installed in 19" Altis width 800 mmPack Cat.Nos Enclosure cable and patch cord management(continued)Vertical extensionFor 42 U enclosures, width 800 mmFits onto 19" uprights1 464 81 Set of 2 vertical trim plates to increase the capacitywith 12 UFor installing 19" panels, DIN rail kit, power supplyunits, etc.Supplied with 8 cable management rings 2 UCat.No 465 42Black RAL 900519" management panelsFor organisation and circulation of patch cordsBlack RAL 9005Metal, 2 axes, quick-fixingHorizontal and front to back with round shadedplastic rings for optimum protection of patchcords (respecting the curvature radius)1 465 22 1 U1 465 23 2 UPlastic with brushes, direct clipping1 465 28 1 U1 465 29 2 UMetal with brushes, quick-fixing1 465 30 1 U1 465 31 2 U19" blanking platesBlack RAL 9005Solid plastic, direct clipping1 465 32 1 U1 465 33 2 USolid metal, quick-fixing1 465 38 1 U1 465 39 2 U1 465 40 3 UCable management ringsDirect clipping front structural uprights of fixedcabinets 9 U to 21 U (Cat.No 465 41 only) andcentral upright of cabinets depth 580 mm4 465 41 1 U, plastic. Useable section 1890 mm 24 465 42 2 U, plastic. Useable section 4.070 mm 2Fixing accessoriesSet of 50 cage-nuts, 50 plasticwashers and 50 x M6 screws1 364 53 With 8.5 mm cage nuts1 364 54 With 9.5 mm cage nutsCustomised 19" LCS 2 enclosuresPlease consult Legrand87

Legrand cabling system LCS 219" LCS 2 cabinets and accessoriesNEW462 01462 11Pivoting cabinet 462 11465 01Technical characteristics (p. 94)IP 20 - IK 08With reversible curved print screen glass safety doorPivoting side panels, tool-free removal from insideLock closure with key 2433 ASupplied with 2 x 19" uprights with depth adjusting aidSupplied with earthing kitTop and bottom grilles for natural ventilation, capable of taking a fan in the high partCharcoal grey RAL 7016Pack Cat.Nos Wall-mounting 19" LCS 2 cabinetsEasier cable management: ability to fix cable guideconnecting rings Cat.Nos 465 41/42 (p. 87) andcable ties (see Legrand catalogue)DLP format cable entries at the top and bottom,bendable, with ability to attach cables using cabletiesRear pre-cut cable entriesCabinet depth 400 mmLoad capacityCapacity Width (mm) Height (mm) (kg)1 462 00 6 U 600 350 181 462 01 9 U 600 500 271 462 02 12 U 600 600 361 462 03 16 U 600 800 48Cabinet depth 580 mm1 462 06 9 U 600 500 271 462 07 12 U 600 600 361 462 08 16 U 600 800 481 462 09 21 U 600 1000 63Pivoting 19" LCS 2 cabinetsCabinets composed of:- base (wall fixing)- pivoting object allowing free access to the rear ofthe cabinet to facilitate installation and maintenanceReversible pivoting directionFull cable entry plate at top and bottom, a brushplate can be fitted Cat.No 462 55Cabinet depth 600 mmLoad capacity(kg)Capacity Width (mm) Height (mm)1 462 11 9 U 600 500 271 462 12 12 U 600 600 361 462 13 16 U 600 800 481 462 14 21 U 600 1000 63Pack Cat.Nos Fixed shelvesQuick fixing without screwsMax. load 15 kgBlack RAL 9005Quick fixing on 2 x 19" uprights1 465 00 Depth 115 mmFor cabinets depth 400, 580 and 600 mm1 465 01 Depth 200 mmFor cabinets depth 400, 580 and 600 mm1 465 02 Depth 360 mmFor cabinets depth 580 and 600 mmThermal managementFan2.5 m power supply cable1 462 60 230 VA fanThermostat1 348 48 Adjustable from 5 to 60 °C, 12 V to 250 VANO contact (10A) and NC contact (5 A)Fixed by magnetCable entry1 462 55 Cable entry plate with brushFor pivoting cabinetsAccessories1 462 64 Set of 4 caster wheels for assembly on pivotingcabinetsTotal load permissible on the 4 casters: 120 kg19" LCS 2 power supply units (see p. 86)19" management panelsvoir see p. 87 xx88

Legrand cabling system LCS 2Linkeo 19" LCS² cabinetsNEWLegrand cabling system LCS 210" LCS 2 cabinet for small business335 92Compatible with19" LCS 2 cabinetequipment462 23462 42 462 70462 20462 24IP 20 - IK 08Wall-mounting cabinets with reversible flat glass safety door withintegrated lockSupplied with 2 x 19" uprights adjustable in depthCable entry at top adjustable with foam sealRear and bottom cable entries equipped with blanking platesHigh grilles for natural ventilation capable of taking the fan kitCat.No 462 70Supplied with earthing kitCabinets compatible with 19" LCS 2 cabinet equipment(except cable management rings)Grey RAL 7035Pack Cat.Nos Linkeo 19" LCS 2 fixed wall-mounting cabinets cabinetsCapacityHeight(mm)Width(mm)Depth(mm)Net weight(kg)Load capacity(kg)1 462 30 6 U 367 600 400 18 181 462 31 9 U 500 600 400 20 271 462 42 12 U 625 600 600 30 361 462 43 16 U 810 600 600 36 48Linkeo LCS 2 fan kit1 462 70 Kit contains:- 2 fans- 1 thermostat- ON/OFF switchSupplied with 2.3 m cablePower supply 230 VA - 50/60 HzTechnical characteristics (p. 94)Pack Cat.Nos 10" LCS 2 cabinet300 mm depth cabinetCompact cabinet suitable for small businessapplications up to 36 RJ 45 socketsIP 20 – IK 08Equipped with:-1 reservible curved door made of safety glass-2 side panels removable from inside-key locking n 2433A-2 depth adjustable uprights-top and bottom cable entries to DLP trunkingsystem format-pre-cut back cable entries-top and bottom perforations for natural ventilationCharcoal grey RAL 7016Load capacityCapacity Width (mm) Height (mm) (kg)1 462 20 6 U 314 352 1210" equipmentsModular empty panel1 335 92 10" panel - 1 UFor up to 2 connector units or 2 fibre optic units (p. 74)Fixed shelf 1 U1 462 23 Depth 120 mmmax. load. 10 kg230 Vac power supply units1 462 24 4 x 2P+E sockets1 462 25 To be equipped with Mosaic 2P+E socketsCapacity: 8 modules1 462 26 4 x 2P+E Schuko sockets, black89

Legrand cabling system LCS 219" LCS 2 enclosures and server enclosures General characteristicsMetallic extendable enclosures. RAL 7016 textured polyester coating providing excellent resistance to corrosion and scratchingFront glass safety door, front and rear micro perforated metal doors for server enclosuresProtection index (weatherproof) against solid objects and liquids: IP 20. Protection index against mechanical shocks: IK 08Perforations in 19" uprights: 9.5 x 9.5 mmPermissible load: 10 kg/U (or 420 kg for a 42 U enclosure), 15 kg/U for server enclosure Compliance with standardsLCS 2 enclosures comply with the following standards:IEC 60529EN 60529IEC 62262EN 62262IEC 60950-1EN 60950-1C 77-210-1EIA-310-DIEC 60297-1 and 2DIN 41414-7IEC 60917-1EN 60917-1IEC 60917-2-1EN 60917-2-1(NF C 20-010) Degrees of protection provided by enclosures(IP code)(NF EN 50102, NF C 20-015) Degree of protection provided byenclosures of electrical equipment againstexternal mechanical impacts (IK code)Safety of data processing equipmentCabinets, enclosures, panels and associated equipment(ANSI/EIA/310-D-1992)(NF C 20-150, NF C 20-151) Sizes of mechanical structuresof the 482.6 mm (19 in) seriesModular order for the development of mechanical structures forelectronic infrastructuresModular order for the development of mechanical structuresfor electronic infrastructures Coordination dimensions forinfrastructure interfaces in widths of 25 mm(enclosure and frame dimensions)LCS 2 enclosures can be integrated into installations complying with thefollowing standards:EN 50173-1EN 50174-1 & 2C 90-480-1 & 2ISO IEC 11801NF C 15-100Part 4-41Information technology - Generic cabling systemsInformation technology - Cabling installation.Information technology - Generic cabling for customer premisesLow voltage electrical installations - recommendations Useable dimensions600800AADCDCE450UsableareaBE450UsableareaB87(2)(maximum 162)465Distance87(2)(maximum 162)465DistanceGGF(2)Min/MaxF(2)Min/MaxCat.Nos Capacity AUsable areaF (1)EB C D Min. Max.G463 00 24 U1085463 06 29 U 1307645490 425463 12 33 U 1485 490118 193 44463 18/30463 19 845 690 625463 21 42 U 645 1886490 425463 22/33 845 690 625463 23 1045 690 890 825 122 197 144463 28845690 62547 U2108463 29 1045 890 825Server enclosuresCat.Nos Capacity H (2) L P A B463 85 42 U 2026 610 1092 1138 1608463 86 42 U 2026 810 1092 1525 1808 Overall dimensions (mm)PHLABCat.Nos Capacity H (2) L D A B463 00 24 U 1226463 06 29 U 1448463 12 33 U 1626 61064511381208463 18/30463 19 8451408463 21463 22/3342 U 2026645845 1608463 23 810 1045 1525 1808463 28845 160847 U 2248463 29 1045 1808160°Server enclosuresUsable areaF (2)Cat.Nos Capacity AEGB C D Min. Max.463 85 42 U 1092 1886 490 890 825 122 197 44463 86 42 U 1092 1886 690 890 825 122 197 144(1) Continuous adjustment with adjustments in widths of 12.5 mm(2) Without adjustment levelling feet (+17 to 50 mm with feet)90

Legrand cabling system LCS 219" LCS 2 enclosures, server enclosures and accessories LCS 2 cable entries (mm)Pre-cut at the top and bottom in 19" format (useable area 451 mm) Enclosure bases (mm)Base kit + side trapsWidth 600 Width 80014Depth600Depth800BDFECA100 or 200Depth1000-Enclosure dim.Width x DepthOverall Mounting Usable areaA B C D E F600 x 600 599 599 478 478 449 449600 x 800 599 799 478 678 449 649800 x 600 799 599 678 478 649 449800 x 800 799 799 678 678 649 649 LCS 2 server enclosure cable entries (mm)Pre-cut at the top in 19" format (useable area 451 mm)Bottom central cut (805 x 450 mm)600 x 1000 599 999 478 878 449 849800 x 1000 799 999 678 878 649 849Width600TopBottom Linking interface (mm)Left or right assembly of a enclosure fitted with a 200 mm high baseReversible interface coverWidth800 Weight enclosures (kg)Weights shown correspond to net weight (without packaging)Cat.NosWeightEnclosureWeightExtension enclosure463 00 69 -AC CA463 06 77 -463 12 84 -BB463 18/30 (ext) 99 72200463 19 110 -463 21 114 -463 22/33 (ext) 127 90463 23 151 -463 28 138 -463 29 163 -Enclosure dim.DepthA B C600 595 435 120 Weight server enclosures (kg)Weights shown correspond to net weight (without packaging)Cat.NosWeightEnclosure463 85 155463 86 16691

Legrand cabling system LCS 2Enclosure accessories 19" LCS 2 (continued) Supports for cable guides on server enclosures Shelves (mm)Cat.No 464 78L1L2L3PPCCat.No 464 79 19" plates with fans (mm)Cable guides can be installedquickly on the supportsCat.Nos 464 72/73/74/78/79Useable widthCat.NosDCL1 L2 L3465 00 115 430462 23 (1) 120 216465 01 200 430465 02 360 430465 05 450 435465 06 650 435465 07 850 435465 08 450 425 320465 09 650 425 420465 10 650 425 420465 17 850 435465 18 850 425 420(1) Fixing centre 236.5 mm3U89 Keyboard support shelf (mm)465482850 max. - 625 min. 460 max.3U89465482Cat.NosNumber of fansVentilation zoneSection(cm 2 )Output(m 3 /h)464 87 2 114 180464 88 3 172 2702505 U92

Legrand cabling system LCS 2Linkeo 19" LCS 2 enclosures General characteristicsMetallic extendable enclosuresRAL 7035 textured polyester coating providing excellent resistance to corrosion and scratchingFront glass safety doorProtection index (weatherproof) against solid objects and liquids: IP 20Protection index against mechanical shocks: IK 08Perforations in uprights: 9.5 x 9.5 mmPermissible load: 10 kg/U (or 420 kg for a 42 U cabinet) Compliance with standards: identical to 19" LCS 2 enclosures Overall dimensions (mm)PAB Cable entries (mm)Pre-cut at the top and bottom in 19" format (useable area 451 mm)Width 600 Width 800HDepth600L160°Cat.Nos Capacity H (1) L D A B463 52 33 U 16266351208463 58/816101138463 59 83542 U 20261408463 606358101525463 61/84 835 1608(1) Without adjustment levelling feet (+17 to 50 mm with feet)Depth800 Useable dimensions (mm)600800 Weight (kg)Weights shown correspond to net weight(without packaging)Cat.NosWeightEnclosureWeightExtensionenclosureAA463 52 82 -463 58/81 (ext) 95 67DCDC463 59 106 -463 60 113 -463 61/84 (ext) 126 92EBEB87(2)(maximum 162)87(2)(maximum 162)GGAdditional uprightsF(2)Min/Max450Usablearea465DistanceAdditional uprightsF(2)Min/Max450Usable area465DistanceUsable areaF (2)Cat.Nos Capacity A (1) EB C D Min. Max.463 52 33 U1485635490 425463 58/81490463 59 835 690 625 94 16942 U 1886463 60 635490 425690463 61/84 835 690 625G44144(1) Overall dimensions(2) Continuous adjustment with adjustments in widths of 12.5 mm93

Legrand cabling system LCS 2LCS 2 19" and 10" cabinets General characteristicsMetallic wall- mounting cabinetsRAL 7016 textured polyester coating providing excellent resistance to corrosion and scratchingFront safety glass doorProtection index (weatherproof) against solid objects and liquids: IP 20Protection index against mechanical shocks: IK 08Permissible load: 3 kg/U (or 48 kg for a 19" cabinet 16 U)12 kg for the 10" cabinet 6 U Compliance with standardsLCS 2 cabinets comply with the following standards:IEC 60529EN 60529IEC 62262EN 62262IEC 60950-1EN 60950-1C 77-210-1EIA-310-DIEC 60297-1 & 2DIN 41414-7(NF C 20-010) Degrees of protection provided byenclosures (IP code).(EN 50102, NF C 20-015) Degrees of protectionprovided by enclosures of electrical material againstexternal mechanical impacts (IK code).Safety of data processing equipment.Cabinets, enclosures, panels and associated equipment(ANSI / EIA / 310-D-1992).(NF C 20-150, NF C 20-151) Sizes of mechanicalstructures of the 482.6 mm (19 in) series Overall dimensions (mm)LCS 2 cabinets can be integrated into installations complying with thefollowing standards:EN 50173-1EN 50174-1 & 2C 90-480-1 & 2ISO IEC 11801NF C 15-100Part 4-41UTE C90-483Information technology - Genericcabling systems.Information technology - Cabling installation.Information technology - Generic cabling forcustomer premisesLow voltage electrical installations - Recommendations.Residential cabling for communication networks600DepthCat.Nos Capacity Height Width Depth462 00 6 U 350462 01 9 U 500462 02 12 U 600400HeightFixed 19" cabinets462 03 16 U 800462 06 9 U 500462 07 12 U 600462 08 16 U 800600580462 09 21 U 1000462 11 9 U 50019" pivotingcabinets462 12 12 U 600462 13 16 U 800600 600462 14 21 U 100010” cabinet 462 20 6 U 352 314 300Pivoting bottom openingFront opening door and side panelsDC93°8431 11496°A167°B1 171175°Cat.Nos462 00Open doorsOpen panelsA B C D1 190Fixed 19" cabinets462 01462 02462 03462 06400 962 305 120510" cabinet door opening Cat.No 462 20462 07462 08462 09462 11580 1140 482.5 1565180°61519" pivotingcabinets462 12462 13462 14600 1179 482.5 156566094

Legrand cabling system LCS 2LCS 2 19" and 10" cabinets Useable dimensions (mm)Fixed 19" LCS 2 cabinets depth 400 mm10" LCS 2 cabinet depth 300 mm600Usable area3 x 10550Overall dimensions 40031410550Overall dimensions 305200 x 8050150 / 250 /350 / 550525451Usable area465DistanceUsable area285 / 435 / 535 / 735Height 350 / 500 / 600 / 800Capacity 6U / 9U / 12U / 16U200 x 140222.5Usable area236.5DistanceUsable area 288Height 352258(maximum 308)92(minimum 42)207(maximum 257)82(minimum 32)12525Fixed 19" LCS 2 cabinets depth 580 mm19" LCS 2 pivoting cabinets depth 600 mm5062600Usable area3 x 105Overall dimensions 580600Usable area 440Overall dimensions 61550200 x 80250 / 350 /550 / 750435(maximum 485)525451Usable area465DistanceUsable area435 / 535 / 735 / 935Height 500 / 600 / 800 / 1000Capacity 9U / 12U / 16U / 21U451Usable area465DistanceUsable area435 / 535 / 735 / 935Height 500 / 600 / 800 / 1000Capacity 9U / 12U / 16U / 21U365(maximum 465)92(minimum 42)200(minimum 100) Fixing of cabinets (mm) Weight (kg)ØCD25AAABCapacity A B C D6 U 2759 U 425Fixed 19"cabinets12 U 525 408 20 1116 U 72521 U 9259 U 42519" pivoting 12 U 525cabinets 16 U 725500 18 921 U 92510” cabinets 6 U 275 250 15 6.5Cat.Nos Weight462 00 16.7462 01 20.4462 02 22.8Fixed 19"462 03 26cabinets462 06 25.7462 07 32.7462 08 41.5462 09 52.5462 11 31.819" pivoting 462 12 40cabinets462 13 47.3462 14 5910” cabinet 462 20 895

HeightLegrand cabling system LCS 2Linkeo fixed 19" LCS 2 cabinets General characteristicsMetallic wall cabinetsRAL 7035 textured polyester coating providing excellent resistance to corrosion and scratchingGlass safety doorProtection index (weatherproof) against solid objects and liquids: IP 20Protection index against mechanical shocks: IK 08Perforations in uprights: 9.5 x 9.5 mmPermissible load: 3 kg/U (or 48 kg for a 19" cabinet 16 U) Compliance with standards: identical to 19" LCS 2 cabinets Overall dimensions (mm) Fixing (mm)WidthDepthBACat.Nos Capacity A B462 30 6 U 153462 31 9 U 286462 42 12 U 419400462 43 16 U 597Cat.Nos Capacity Height Width Depth462 30 6 U 367400462 31 9 U 500600462 42 12 U 625600462 43 16 U 810 Door opening (mm)900 Fan kit (mm)1903604574,5Cat.NoNumber offansVentilation zoneCrosssectionOutput(mm²)(m 3 /h)462 70 2 110 160A130°max.Cat.Nos Capacity A462 30 6 U462 31 9 U930462 42 12 U462 43 16 U113096

Legrand cabling system LCS 2 xxxxxx Compliance of the LCS 2 systems with standards andcertificationsLCS 2 systems and components (de-embedded)conform to the following standards:- EIA/TIA 568 B2.10- EN 50173-1 and EN 50173-2- ISO/IEC 11801 version 2The LCS 2 system supports 10G applicationsBase-T up to 100 m in a transmission channelconforms with standards ISO/IEC 24750, TIA TSB 155and IEEE 802.3 anThe class link EA of the LCS 2 system also conforms with amendment1 (04/2008) of standard ISO 11801 and its components conform withdraft amendment 2LCS 2 systems are certified by expert independent laboratory 3P Main characteristics of the LCS 2 systemsLCS 2 6A LCS 2 6 LCS 2 5eFrequency 500 Mhz 250 MHz 100 MhzSpeed 10 Gbit/s 1 Gbit/s 1 Gbit/sWiring Copper FO Copper FO CopperConnectors RJ 45 SC-LC… RJ 45 SC-LC… RJ 45Length cable max. 100 m variable 100 m variable 100 mDimensions49,8352137,1166PerformanceMaximum recommended lengths of links to ensure high performanceof the systems with the use of RJ 45 sockets with copper feedthroughsand/or RJ 45 socketsLength Associated lengths (m)Cords Cables Links8 70 78Cat. 6 15 60 7520 55 758 75 83Cat. 5e 15 65 8020 60 80We recommend selecting the shortest wiring lengths for more flexibilityregarding cord length in the event of reconfiguration New names for LAN cables (according to ISO 11801-2)They correspond to: "type of cable shield"/ "type of twisted pair shield"TP monitoring (for twisted pairs)Typeof cable Shield Shieldold new of the cableof pairstwistedname nameSSTP S/FTP S: screen made up F: screenformeda metal braidof a ribbonalumin/polyesterSFTP SF/UTP SF: combination of U: no screenribbon + braidSTP U/FTP F: screenformedU: no screen of a ribbonalumin/polyesterFTP F/UTP F: screen formed U: no screenof a ribbonalumin/polyesterUTP U/UTP U: no screen U: no screen Zone distribution boxesShielding oftwisted pairsCable shieldingCompliance with standards:Zone distribution box: EIA/TIA 568UTE C 15-900NF C 15-100 - NF C 20-730EN 50-174.2ISO 11801EN 50173IEC 60950Cords and cables: ISO 11801 id.2.0, EN 50173-1, EIA/TIA 568Application exampleA zone distribution box is installed to connect the RJ 45 sockets andmeet the future requirements of the installation7 linesin reserveConnection to additional RJ 45 sockets is done by adding RJ 45 - RJ 45cords between the unit and the RJ 45 sockets with copper feedthroughGeneral characteristics:- 6 or 12 incoming ports (depending on Cat.No)RJ 45 wiring- 4 to 8 or 12 outgoing ports (depending on Cat.No) maximumConnection of mixed cords via RJ 45 connector(RJ 45/stripped)- UTP and FTP versions- Cat. 5e and 6- for computer applications; telephone, access control etc.Technical characteristics:- material: polycarbonate PC hoodPolypropylene PP base- colour: RAL 7035- Weatherproofing protection index: IP 21- Mechanical shock protection index: IK 07- holds connector units in place on the box: 100 N- Cables anchored on support using Colring cable ties1 linein reserve97

Legrand cabling system LCS 2 xxxxxx Flush-mounting Ethernet 10/100 base T switches779 00 779 01 779 20Power supply 230 V PoE 230 VSpeed100 MbpsStandards 802.3 / 802.3u 802.3u802.3 af802.3 / 802.3uCommontechnicalcharacteristicsAdditionalcharacteristics Mosaic Wi-Fi access pointsAn 802.11 a and b/g solution - off: speed 10 Mbps (according to RFC 2131) interface configuration files (Upload/download)Radio communication standard 802.11 b/g 802.11 aPower supply standard802.3 afPower over EthernetFrequency bandbetween 2.40and 2.48 GHz5 GHzNumber of available channels 13 8Max. gross speed 54 Mbps 54 Mbps Benefits of a Legrand Wi-Fi access point- Possibility of simultaneous operation on 2 frequencies, a and b/gNew products: invited access: used to allocate a network dedicated tovisitorsProvides a max. gross speed of up to 2 x 54 Mbps in simultaneousmode- Very high security level: WPA2 encryption (802.11i) and authentication(802.1x)- Possibility of roaming (moving from one access point to anotherwithout breaking the link)- Quality of service (priority automatically given to voice, then video andfinally data)- Easy to configure and make secure: using the CD suppliedwith the access point InstallationIn all supports able to take a Mosaic mechanism (trunking, columns,flush-mounting boxes, floor boxes, etc.)Do not place access points behind anything that could limit theantenna's rangeAccess points are connected tool-free via an RJ 45 connector Sizing- provide 1 access point for 1 localised requirement (in entrance hall)- provide 1 access point per 100 m 2 for overall coverage and amaximum gross speed- provide 1 access point with an RJ 45 socket for a desk used by visitors Installation principle for a Wi-Fi access point with Powerover Ethernet injector Operation of PoE injectorA PoE injector has one input and one output per access point to besuppliedIncoming switch: dataPower supply48 V: Data: PowerOutgoing cable topatch panel:Data + power supplyPair 2Pair 3 Pair 1 Pair 4RJ45 Connector1 2 3 4 5 6 7 8230 V230 VPoE injectorSwitchTwisted pairs cableexiting from the PoEcarries power (48 V)to feed the data Legrand servicesThe Relations Pro (1) service will work with you and guide you in settingup your VDI sites:- help with sizing the installation- on-site assistance for integrating products and making importantinstallations secureAdvisors are also available to answer all your technical questions(1) 0810 48 48 48 (local call rate) Monday to Friday 0800 to 1800Particular case of the 1port PoE: Clips directlyonto a port on any patchpanelA single cord isnecessary to connect itto a port on the switchPoE injector4 x RJ 45 connectorunit98

Legrand cabling system LCS 2LCS 2 fibre optic Quick crimping with kit Cat.No 331 93Types of connector- ST connector: Helical shapelocked by "push and turn" bayonettype connector- SC connector: Rectangular shape"push-pull" latch typelocking. Suitable for a largenumber of active devicesRecommended in the generic standardsISO/IEC 11801 and EN 50173- LC connector: Rectangular shapetab lockingHalf the size of a conventionalconnectorTechnical characteristics- the kit is used for attaching the connectors to 900 μm fibre- average loss of a connection: 0.3 dB- ideal for high-speed systems: 10 Gb Ethernet provided with50/125 μm connector- Operating temperature: from 0 °C to 65 °CAdvantages:- high quality finish- no polishing: connectors pre-polished in factory- no Epoxy type glue required- easy connection- no complex tools or consumables required: the terminationis made in less than 3 minutes, and is very cost-effective- practical and light kit- crimping possible of both multimode and monomode fibresThe 6 essential steps for quick crimpingStep 1: Strip the fibre Step 2: Cleave the fibre Step 3: Inspect the fibreStep 4: Insert the fibre Step 5: Align the fibre Step 6: Crimp the connector New optical classes ISO 11801 2nd Ed.Parameters of the optical link (ISO 11801/EN 50173) Speed ensured by distanceISO 11801-2 optic classes850/1300 nm bandwid(Mhz/km)MultimodeMonomodeParameter 850 nm 1 300 nm 1 310 nm 1 550 nmFibre attenuation dB/km 3.5 max. 1.5 max. 1.0 1.0Bandwidth MHz.km 200 min. 500 min. n/a n/a1500 / 500OS1Connector attenuation dB 0.75 max. 0.75 max. 0.75 max. 0.75 max.Return loss dB 20 min. 20 min. 26 min. 26 min. Typical layout of an optical link between 2 distribution blocks200 / 500500 / 500OM3Table 2RJ 45 panelRJ 45 socketsOM1OM22Electrical signalCopper/optical fibre switchCopper/opticalfibre converterTable 11Optical fibre drawerOptical fibre drawerCopper/optical fibre switchRJ 45 panelOptical signalCopper/opticalfibre converterElectrical signalProtocolsMultimode fibreMonomode fibre(length max.)OM 1 OM 2 OM 3 OS 110 GbEthernet33 m 82 m 300 m 10 km(S/L base)Ethernet Gb(LX base)550 m 550 m 550 m 2 kmEthernet Gb(SX base)275 m 550 m 550 m -Fast Ethernet 2000 m 2000 m 2000 m 2 kmEthernet 10 Mbps 2000 m 1514 m 1514 m -: Optical link: Copper linkRJ 45 socketsDesired perennity > 10 years 10 to 15 years > 15 years > 15 yearsMarket trend 99

catalogue number indexCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPack090 00097 99 85 10300 00325 00 74 200001 - 200004 - 200005 - 200006 - 200007 - 200008 - 200009 - 200010 - 200011 - 200012 - 200013 - 200014 - 200015 - 200050 - 200051 - 200052 - 200053 - 200054 - 200055 - 200058 - 200059 - 200060 - 200069 77 170 - 171 - 172 - 173 - 174 - 175 - 176 - 177 - 178 - 179 - 1326 00 78 301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 3326 15 78 316 - 317 - 320 75 121 - 122 - 123 - 124 - 125 - 126 - 127 - 1327 37 70 144 75 145 71 1046 - 1047 - 1048 - 1050 67 30551 - 30552 - 30553 - 30554 61 30555 - 30556 - 50057 - 50058 - 50059 - 50060 71 173 67 50074 - 50076 61 5077 57 50078 - 50080 80 181 - 183 71 10328 50 67 50051 - 50052 - 50053 - 50054 - 50055 - 50056 61 30557 - 30558 - 50059 - 50061 - 50062 - 50063 - 50071 - 100072 - 100073 67 100074 - 1000328 78 57 50088 72 191 - 1329 07 77 1330 48 75 149 - 161 79 362 - 363 - 365 - 369 - 370 - 371 - 372 - 373 - 375 - 376 - 377 - 378 - 380 - 381 - 382 - 3331 00 75 106 - 1007 - 1008 - 1009 - 1010 - 1011 - 1012 - 1013 - 1027 - 135 87 147 75 151 79 352 - 353 - 354 59 1057 - 358 - 381 65 1093 75 197 - 1332 37 86 160 63 161 - 162 71 178 86 179 - 180 72 181 70 187 86 1332 88 86 191 70 193 - 1335 01 70 102 - 105 - 106 - 107 - 110 76 111 - 112 70 113 - 116 - 117 - 118 - 119 - 120 78 121 73 122 - 123 - 124 - 125 - 126 - 127 - 130 72 131 - 132 - 233 - 234 70 135 - 136 - 137 - 138 - 139 - 140 58 144 62 145 - 146 - 151 66 152 - 154 - 255 - 261 60 162 - 163 - 164 - 265 - 266 - 273 56 176 - 279 72 188 66 189 60 190 56 1335 91 56 1092 89 193 77 194 - 8347 95 82 20348 48 84 1364 53 87 154 - 1365 80 85 2081 - 2082 - 1400 00462 00 88 101 - 102 - 103 - 106 - 107 - 108 - 109 - 111 - 112 - 113 - 114 - 120 89 123 - 124 - 125 - 126 - 130 - 131 - 142 - 143 - 155 88 160 - 164 - 170 89 1463 00 83 106 - 112 - 118 - 119 - 121 - 122 - 123 - 128 - 129 - 130 83 133 - 1463 34 - 135 - 137 - 138 - 139 - 152 - 158 - 159 - 160 - 161 - 172 - 173 - 175 - 176 - 178 - 179 - 181 - 184 - 185 82 186 - 1464 50 84 151 - 152 - 153 - 154 - 156 - 158 - 160 - 161 - 162 - 163 - 164 - 166 - 169 87 170 - 172 - 173 - 174 - 176 - 177 - 178 82 179 - 180 87 181 - 182 82 183 85 184 - 185 - 186 - 187 84 188 - 189 - 1100

Cat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPackCat.NosPageNoPack464 90 84 1465 00 86 101 - 102 - 105 - 106 - 107 - 108 - 109 - 110 - 111 - 112 - 113 - 117 82 118 - 119 86 122 87 123 - 128 84 129 - 130 - 131 - 132 - 133 - 138 - 139 - 140 - 141 87 442 - 445 86 150 - 154 - 160 - 162 - 1472 72 85 175 - 1473 62 85 163 - 191 - 192 - 1476 83 85 193 84 194 - 195 - 196 85 1482 20 85 1500 00515 00 68 401 - 402 - 403 - 404 - 405 - 410 62 4515 11 62 412 - 413 - 414 - 415 - 4516 36 67 137 - 138 - 139 - 140 - 141 - 142 - 143 - 1517 01 71 5002 - 5003 - 5004 - 5006 - 5007 - 5009 - 120 80 122 - 140 70 1041 - 1052 61 553 - 554 - 555 - 557 62 458 - 459 - 462 61 163 - 164 - 165 - 572 - 173 - 174 - 175 - 180 57 581 - 582 - 583 - 590 68 491 - 492 - 493 - 494 - 495 - 496 62 497 - 198 - 4518 50 61 151 - 152 - 153 - 154 - 1518 55 61 156 - 157 - 158 - 159 - 160 - 161 - 162 - 163 - 164 - 165 - 166 57 567 - 568 - 569 - 570 - 571 - 572 - 573 - 5533 00 71 301 - 302 - 303 - 3539 49 71 5600 00673 44 65 1045 - 1046 59 1054 65 1055 - 1066 73 196 65 10695 56 69 1/2057 - 1/2061 65 1/2069 - 5/10079 71 180 - 1081 65 1700 00765 01 69 1002 - 503 64 104 - 105 - 1006 - 522 - 1023 - 1024 59 1025 - 1030 69 132 64 133 64 1/1035 71 1036 - 10765 37 71 1038 - 1039 - 1041 69 542 - 544 64 546 - 551 69 1052 - 1054 - 1055 - 1061 64 1062 - 1063 - 1064 - 1065 - 1066 - 1073 59 1076 - 1081 64 1082 - 1083 - 591 64 1092 - 1093 - 1094 - 595 - 596 - 597 69 599 59 5775 41 86 1778 80 71 181 - 1779 00 72 101 - 113 73 114 - 120 72 130 80 1786 16 77 117 - 118 - 120 68 1021 - 1022 63 1023 - 1024 68 1025 - 1026 63 1027 - 10787 52 80 153 - 154 - 157 - 1787 58 80 159 - 163 - 164 - 168 - 169 - 170 - 171 - 172 - 173 - 174 - 1792 54 80 157 - 164 - 175 - 1794 33 64 1/1051 69 1052 - 1054 - 1055 - 1061 64 1062 - 1064 - 1065 - 1073 59 1076 - 1092 64 10900 00919 45 71 15700 005720 83 72 184 - 185 - 15723 02 65 1003 69 1004 - 1006 59 1014 65 1015 69 1016 65 1017 - 1022 - 1023 - 1024 - 1030 68 1031 63 1032 68 1033 63 1035 71 1036 - 1039 65 150 59 551 - 1052 - 1053 65 55723 54 65 1055 - 1076 73 177 - 178 - 15728 02 65 1003 69 1004 - 1006 59 1014 65 1015 69 1016 65 1017 - 1022 - 1023 - 1024 - 1030 68 1031 63 1032 68 1033 63 1035 71 1036 - 1039 65 150 59 551 - 1052 - 1053 65 554 - 1055 - 1076 73 177 - 178 - 183 72 184 - 185 - 16300 006339 12 63 1013 - 1014 - 1015 - 1016 - 1017 - 1024 - 125 - 126 - 127 - 128 - 129 - 168 - 569 - 170 - 171 - 172 - 173 - 1101

World Headquartersand International Department87045 LIMOGES CEDEXFRANCETel. : + 33 5 55 06 87 87Fax : + 33 5 55 06 75 75EXB10017www.legrandgroup.com